[PATCH] bitbake.conf: Introduce PSEUDO_LOGFILE and FAKEROOTLOGS variables used by bitbake to print pseudo.log

[PATCH] bitbake.conf: Introduce PSEUDO_LOGFILE and FAKEROOTLOGS variables used by bitbake to print pseudo.log

[Tomasz Dziendzielski]

Bitbake depends on these variables while looking for pseudo.log file in
case of fakeroot task failure.

Signed-off-by: Tomasz Dziendzielski <tomasz.dziendzielski@gmail.com>
---
 meta/conf/bitbake.conf | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/meta/conf/bitbake.conf b/meta/conf/bitbake.conf
index 375467d155..d0d8da6b90 100644
--- a/meta/conf/bitbake.conf
+++ b/meta/conf/bitbake.conf
@@ -681,6 +681,7 @@ SRC_URI = ""
 
 # Use pseudo as the fakeroot implementation
 PSEUDO_LOCALSTATEDIR ?= "${WORKDIR}/pseudo/"
+PSEUDO_LOGFILE ?= "${WORKDIR}/pseudo/pseudo.log"
 PSEUDO_PASSWD ?= "${STAGING_DIR_TARGET}:${PSEUDO_SYSROOT}"
 PSEUDO_SYSROOT = "${COMPONENTS_DIR}/${BUILD_ARCH}/pseudo-native"
 PSEUDO_IGNORE_PATHS = "/usr/,/etc/,/lib,/dev/,/run/,${T},${WORKDIR}/recipe-sysroot,${SSTATE_DIR},${STAMPS_DIR},${WORKDIR}/pkgdata-sysroot,${TMPDIR}/sstate-control,${DEPLOY_DIR},${WORKDIR}/deploy-,${TMPDIR}/buildstats,${WORKDIR}/sstate-build-package_,${WORKDIR}/sstate-install-package_,${WORKDIR}/sstate-build-image_complete,${TMPDIR}/sysroots-components,${BUILDHISTORY_DIR},${TMPDIR}/pkgdata,${TOPDIR}/cache,${COREBASE}/scripts,${CCACHE_DIR}"
@@ -691,9 +692,10 @@ export PSEUDO_DISABLED = "1"
 #export PSEUDO_LIBDIR = "${STAGING_DIR_NATIVE}$PSEUDOBINDIR/../lib/pseudo/lib
 FAKEROOTBASEENV = "PSEUDO_BINDIR=${PSEUDO_SYSROOT}${bindir_native} PSEUDO_LIBDIR=${PSEUDO_SYSROOT}${prefix_native}/lib/pseudo/lib PSEUDO_PREFIX=${PSEUDO_SYSROOT}${prefix_native} PSEUDO_IGNORE_PATHS=${@oe.path.canonicalize(d.getVar('PSEUDO_IGNORE_PATHS'))} PSEUDO_DISABLED=1 PYTHONDONTWRITEBYTECODE=1"
 FAKEROOTCMD = "${PSEUDO_SYSROOT}${bindir_native}/pseudo"
-FAKEROOTENV = "PSEUDO_PREFIX=${PSEUDO_SYSROOT}${prefix_native} PSEUDO_LOCALSTATEDIR=${PSEUDO_LOCALSTATEDIR} PSEUDO_PASSWD=${PSEUDO_PASSWD} PSEUDO_NOSYMLINKEXP=1 PSEUDO_IGNORE_PATHS=${@oe.path.canonicalize(d.getVar('PSEUDO_IGNORE_PATHS'))} PSEUDO_DISABLED=0"
+FAKEROOTENV = "PSEUDO_PREFIX=${PSEUDO_SYSROOT}${prefix_native} PSEUDO_LOCALSTATEDIR=${PSEUDO_LOCALSTATEDIR} PSEUDO_LOGFILE=${PSEUDO_LOGFILE} PSEUDO_PASSWD=${PSEUDO_PASSWD} PSEUDO_NOSYMLINKEXP=1 PSEUDO_IGNORE_PATHS=${@oe.path.canonicalize(d.getVar('PSEUDO_IGNORE_PATHS'))} PSEUDO_DISABLED=0"
 FAKEROOTNOENV = "PSEUDO_UNLOAD=1"
 FAKEROOTDIRS = "${PSEUDO_LOCALSTATEDIR}"
+FAKEROOTLOGS = "${PSEUDO_LOGFILE}"
 PREFERRED_PROVIDER_virtual/fakeroot-native ?= "pseudo-native"
 
 ##################################################################
-- 
2.30.1

Re: [OE-core] [PATCH] bitbake.conf: Introduce PSEUDO_LOGFILE and FAKEROOTLOGS variables used by bitbake to print pseudo.log

[Richard Purdie]

On Mon, 2021-02-22 at 21:37 +0100, Tomasz Dziendzielski wrote:
Bitbake depends on these variables while looking for pseudo.log file in
case of fakeroot task failure.

Signed-off-by: Tomasz Dziendzielski <tomasz.dziendzielski@gmail.com>
---
 meta/conf/bitbake.conf | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/meta/conf/bitbake.conf b/meta/conf/bitbake.conf
index 375467d155..d0d8da6b90 100644
--- a/meta/conf/bitbake.conf
+++ b/meta/conf/bitbake.conf
@@ -681,6 +681,7 @@ SRC_URI = ""
 

 # Use pseudo as the fakeroot implementation
 PSEUDO_LOCALSTATEDIR ?= "${WORKDIR}/pseudo/"
+PSEUDO_LOGFILE ?= "${WORKDIR}/pseudo/pseudo.log"
 PSEUDO_PASSWD ?= "${STAGING_DIR_TARGET}:${PSEUDO_SYSROOT}"
 PSEUDO_SYSROOT = "${COMPONENTS_DIR}/${BUILD_ARCH}/pseudo-native"
 PSEUDO_IGNORE_PATHS = "/usr/,/etc/,/lib,/dev/,/run/,${T},${WORKDIR}/recipe-sysroot,${SSTATE_DIR},${STAMPS_DIR},${WORKDIR}/pkgdata-sysroot,${TMPDIR}/sstate-control,${DEPLOY_DIR},${WORKDIR}/deploy-,${TMPDIR}/buildstats,${WORKDIR}/sstate-build-package_,${WORKDIR}/sstate-install-package_,${WORKDIR}/sstate-build-image_complete,${TMPDIR}/sysroots-components,${BUILDHISTORY_DIR},${TMPDIR}/pkgdata,${TOPDIR}/cache,${COREBASE}/scripts,${CCACHE_DIR}"
@@ -691,9 +692,10 @@ export PSEUDO_DISABLED = "1"
 #export PSEUDO_LIBDIR = "${STAGING_DIR_NATIVE}$PSEUDOBINDIR/../lib/pseudo/lib
 FAKEROOTBASEENV = "PSEUDO_BINDIR=${PSEUDO_SYSROOT}${bindir_native} PSEUDO_LIBDIR=${PSEUDO_SYSROOT}${prefix_native}/lib/pseudo/lib PSEUDO_PREFIX=${PSEUDO_SYSROOT}${prefix_native} PSEUDO_IGNORE_PATHS=${@oe.path.canonicalize(d.getVar('PSEUDO_IGNORE_PATHS'))} PSEUDO_DISABLED=1 PYTHONDONTWRITEBYTECODE=1"
 FAKEROOTCMD = "${PSEUDO_SYSROOT}${bindir_native}/pseudo"
-FAKEROOTENV = "PSEUDO_PREFIX=${PSEUDO_SYSROOT}${prefix_native} PSEUDO_LOCALSTATEDIR=${PSEUDO_LOCALSTATEDIR} PSEUDO_PASSWD=${PSEUDO_PASSWD} PSEUDO_NOSYMLINKEXP=1 PSEUDO_IGNORE_PATHS=${@oe.path.canonicalize(d.getVar('PSEUDO_IGNORE_PATHS'))} PSEUDO_DISABLED=0"
+FAKEROOTENV = "PSEUDO_PREFIX=${PSEUDO_SYSROOT}${prefix_native} PSEUDO_LOCALSTATEDIR=${PSEUDO_LOCALSTATEDIR} PSEUDO_LOGFILE=${PSEUDO_LOGFILE} PSEUDO_PASSWD=${PSEUDO_PASSWD} PSEUDO_NOSYMLINKEXP=1 PSEUDO_IGNORE_PATHS=${@oe.path.canonicalize(d.getVar('PSEUDO_IGNORE_PATHS'))} PSEUDO_DISABLED=0"
 FAKEROOTNOENV = "PSEUDO_UNLOAD=1"
 FAKEROOTDIRS = "${PSEUDO_LOCALSTATEDIR}"
+FAKEROOTLOGS = "${PSEUDO_LOGFILE}"
 PREFERRED_PROVIDER_virtual/fakeroot-native ?= "pseudo-native"

This is horribly confusing since PSEUDO_* variables are usually instructions
to pseudo on what to do but in this case its an OE variable instructing OE 
code and its presumably ignored by pseudo?

I think we may need to rethink the naming if so...

Cheers,

Richard