All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Darrick J. Wong" <djwong@kernel.org>
To: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@infradead.org>, linux-xfs@vger.kernel.org
Subject: Re: [PATCH V2] xfs: initialise attr fork on inode create
Date: Thu, 25 Feb 2021 15:17:50 -0800	[thread overview]
Message-ID: <20210225231750.GL7272@magnolia> (raw)
In-Reply-To: <20210225203212.GJ4662@dread.disaster.area>

On Fri, Feb 26, 2021 at 07:32:12AM +1100, Dave Chinner wrote:
> On Thu, Feb 25, 2021 at 08:09:00AM +0000, Christoph Hellwig wrote:
> > This look really nice to me, but a few comments on the overall
> > structure:
> > 
> > > +/*
> > > + * Set an inode attr fork offset based on the format of the data fork.
> > > + *
> > > + * If a size of zero is passed in, then caller does not know the size of
> > > + * the attribute that might be added (i.e. pre-emptive attr fork creation).
> > > + * Hence in this case just set the fork offset to the default so that we don't
> > > + * need to modify the supported attr format in the superblock.
> > > + */
> > >  int
> > >  xfs_bmap_set_attrforkoff(
> > >  	struct xfs_inode	*ip,
> > > @@ -1041,6 +1048,11 @@ xfs_bmap_set_attrforkoff(
> > >  	case XFS_DINODE_FMT_LOCAL:
> > >  	case XFS_DINODE_FMT_EXTENTS:
> > >  	case XFS_DINODE_FMT_BTREE:
> > > +		if (size == 0) {
> > > +			ASSERT(!version);
> > > +			ip->i_d.di_forkoff = xfs_default_attroffset(ip) >> 3;
> > > +			break;
> > > +		}
> > >  		ip->i_d.di_forkoff = xfs_attr_shortform_bytesfit(ip, size);
> > >  		if (!ip->i_d.di_forkoff)
> > >  			ip->i_d.di_forkoff = xfs_default_attroffset(ip) >> 3;
> > 
> > I don't think cramming this special case into xfs_bmap_set_attrforkoff
> > makes a whole lot of sense.  I'd rather just open code this logic into
> > the caller like this:
> > 
> > 	if (init_xattrs) {
> > 		ip->i_d.di_forkoff = xfs_default_attroffset(ip) >> 3;
> > 		ip->i_afp = xfs_ifork_alloc(XFS_DINODE_FMT_EXTENTS, 0);
> > 	}
> > 
> > which seems a whole lot simpler and much more obvious than the rather
> > arcane calling conventions for this magic invocation of 
> > xfs_bmap_set_attrforkoffxfs_bmap_set_attrforkoff.
> 
> 
> AAARRRRGGGGGHHHHH!
> 
> That's exactly what I did with the first version and Brian and then
> Darrick were both adamant that setting the attr fork had to be done
> through xfs_bmap_set_attrforkoff() via formalising "size=0 means use
> defaults".

I don't recall being adamant that you use xfs_bmap_set_attrforkoff here;
I think I only didn't want forkoff setter functions getting scattered
all over the codebase.

Regardless of whatever I said for V1, now I can see what exactly that
looks like, and I don't like it.  xfs_bmap_set_attrforkoff is the
function you call to set forkoff when you want to set an xattr of a
particular size, and need to adjust forkoff.  We don't know what the
security xattr(s) are going to be yet, so this seems like a misuse of
that function.

Just do it the way Christoph said.

> I know, just doing it the way you suggest is simple, obvious and
> straight forward and that's exactly the argument I made, but nobody
> else wanted it that way.
> 
> > 
> > > +struct xfs_ifork *
> > > +xfs_ifork_alloc(
> > > +	enum xfs_dinode_fmt	format,
> > > +	xfs_extnum_t		nextents)
> > > +{
> > > +	struct xfs_ifork	*ifp;
> > > +
> > > +	ifp = kmem_cache_zalloc(xfs_ifork_zone, GFP_NOFS | __GFP_NOFAIL);
> > > +	ifp->if_format = format;
> > > +	ifp->if_nextents = nextents;
> > > +	return ifp;
> > > +}
> > 
> > Please split the addition of xfs_ifork_alloc and the conversion of the
> > existing calles into a prep patch.
> > 
> > > -	if (unlikely(ip->i_afp->if_format == 0)) /* pre IRIX 6.2 file system */
> > > -		ip->i_afp->if_format = XFS_DINODE_FMT_EXTENTS;
> > 
> > This check is lost.  I think we're fine as we don't support such old
> > file systems at all, but we should probably document this change (and
> > maybe even split it into a separate prep patch).
> 
> I don't see any point in splitting it out into a separate patch.
> It's dead code, so while I'm touching this exact piece of code. I'll
> document it.

IRIX 6.2 was released what, 25 years ago?  Probably fine to just turn
that into a comment.

> > >  struct xfs_ifork *xfs_iext_state_to_fork(struct xfs_inode *ip, int state);
> > >  
> > >  int		xfs_iformat_data_fork(struct xfs_inode *, struct xfs_dinode *);
> > > diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
> > > index 636ac13b1df2..95e3a5e6e5e2 100644
> > > --- a/fs/xfs/xfs_inode.c
> > > +++ b/fs/xfs/xfs_inode.c
> > > @@ -773,6 +773,7 @@ xfs_init_new_inode(
> > >  	xfs_nlink_t		nlink,
> > >  	dev_t			rdev,
> > >  	prid_t			prid,
> > > +	bool			init_xattrs,
> > >  	struct xfs_inode	**ipp)
> > >  {
> > >  	struct inode		*dir = pip ? VFS_I(pip) : NULL;
> > 
> > So instead of passing the parameter down a few levels I think we can
> > just take the decision inside of xfs_init_new_inode with a simple check
> > like:
> > 
> > 	if (pip && nlink > 0 && !S_ISLNK(mode) &&
> > 	    xfs_create_need_xattr(dir, default_acl, acl)) {
> > 	    	...
> > 	}
> 
> We don't pass down the acl/default acl to this function. We have to
> pass something down into here for it to do the right thing....
> 
> > 
> > > +static inline bool
> > > +xfs_create_need_xattr(
> > > +	struct inode	*dir,
> > > +	struct posix_acl *default_acl,
> > > +	struct posix_acl *acl)
> > > +{
> > > +	if (acl)
> > > +		return true;
> > > +	if (default_acl)
> > > +		return true;
> > > +	if (!IS_ENABLED(CONFIG_SECURITY))
> > > +		return false;
> > > +	if (dir->i_sb->s_security)
> > > +		return true;
> > > +	return false;
> > > +}
> > 
> > This isn't XFS-specific.  Please move it to fs.h and split it into another
> > prep patch.
> 
> No. I'm not putting a special, targetted one-off
> filesystem-implementation specific functions in fs.h even if it only
> contain generic checks. There's already way too much crap in fs.h,
> and this doesn't improve the situation. If you have need for it in
> other filesystems, then pull it up out of the XFS code in that
> patchset.

Agreed, the next fs to want this can hoist it.

--D

> 
> > Also this won't compile as-is as s_security only exists
> > when CONFIG_SECURITY is defined, so the IS_ENABLED needs to be replaced
> > with an ifdef.
> 
> I'll fix that.
> 
> Cheers,
> 
> -Dave.
> -- 
> Dave Chinner
> david@fromorbit.com

  reply	other threads:[~2021-02-25 23:18 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-22 23:05 [PATCH V2] xfs: initialise attr fork on inode create Dave Chinner
2021-02-23 18:22 ` Allison Henderson
2021-02-25  8:09 ` Christoph Hellwig
2021-02-25 20:32   ` Dave Chinner
2021-02-25 23:17     ` Darrick J. Wong [this message]
2021-02-25 23:21 ` Darrick J. Wong
2021-02-26  5:01   ` Dave Chinner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210225231750.GL7272@magnolia \
    --to=djwong@kernel.org \
    --cc=david@fromorbit.com \
    --cc=hch@infradead.org \
    --cc=linux-xfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.