[PATCH] cmd: mmc: modify more readable about hwpartition usage

[PATCH] cmd: mmc: modify more readable about hwpartition usage

[Jaehoon Chung]

Modified more readable about hwpartition usage.
Because it's difficult to understand how to use its command.
The arguments didn't optional.
mmc hwpartition needs to pass <USER> <GP> <MODE> as arguments.
Description about each arguments what is required is the below:
 USER - <user> <enh> <start> <cnt> <wrrel> <{on|off}>
 GP   - <{gp1|gp2|gp3|gp4}> <cnt> <enh> <wrrel> <{on|off}>
 MODE - <{check|set|complete}>

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
---
 cmd/mmc.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/cmd/mmc.c b/cmd/mmc.c
index cb6b59f36a43..c1c00d0f325d 100644
--- a/cmd/mmc.c
+++ b/cmd/mmc.c
@@ -1008,11 +1008,14 @@ U_BOOT_CMD(
 	"mmc list - lists available devices\n"
 	"mmc wp - power on write protect boot partitions\n"
 #if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING)
-	"mmc hwpartition [args...] - does hardware partitioning\n"
+	"mmc hwpartition <USER> <GP> <MODE> - does hardware partitioning\n"
 	"  arguments (sizes in 512-byte blocks):\n"
-	"    [user [enh start cnt] [wrrel {on|off}]] - sets user data area attributes\n"
-	"    [gp1|gp2|gp3|gp4 cnt [enh] [wrrel {on|off}]] - general purpose partition\n"
-	"    [check|set|complete] - mode, complete set partitioning completed\n"
+	"   USER - <user> <enh> <start> <cnt> <wrrel> <{on|off}>\n"
+	"	: sets user data area attributes\n"
+	"   GP - <{gp1|gp2|gp3|gp4}> <cnt> <enh> <wrrel> <{on|off}>\n"
+	"	: general purpose partition\n"
+	"   MODE - <{check|set|complete}>\n"
+	"	: mode, complete set partitioning completed\n"
 	"  WARNING: Partitioning is a write-once setting once it is set to complete.\n"
 	"  Power cycling is required to initialize partitions after set to complete.\n"
 #endif
-- 
2.29.0