* [PATCH v3 0/7] Add basic support for Loongson-2K1000
@ 2021-03-05 10:18 Qing Zhang
0 siblings, 0 replies; 3+ messages in thread
From: Qing Zhang @ 2021-03-05 10:18 UTC (permalink / raw)
To: Huacai Chen, Jiaxun Yang, Thomas Bogendoerfer, Thomas Gleixner,
Marc Zyngier
Cc: linux-mips, linux-kernel, wangming01
These patches support single-core DTS boot to the serial port login
interface, which can be operated using conventional commands.
I have successfully tested it on the Loongson 2K1000 machine.
pmon: http://cgit.loongnix.org/cgit/pmon-loongson3/
Qing Zhang (7):
MIPS: Loongson64: DeviceTree for 2K1000
MIPS: Loongson64: Distinguish firmware dependencies DTB/LEFI
MIPS: Loongson64: Add support for the 2K1000 to get cpu_clock_freq
MIPS: Loongson64: Add 2K1000 early_printk_port
irqchip/loongson-liointc: irqchip add 2.0 version
dt-bindings: interrupt-controller: Add Loongson-2K1000 LIOINTC
MIPS: Loongson64: Add a Loongson-2k default config file
.../loongson,liointc.yaml | 7 +-
arch/mips/boot/dts/loongson/Makefile | 1 +
.../boot/dts/loongson/loongson64-2k1000.dtsi | 243 ++++++++++++
.../dts/loongson/loongson64_2core_2k1000.dts | 10 +
arch/mips/configs/loongson2k_defconfig | 353 ++++++++++++++++++
.../include/asm/mach-loongson64/boot_param.h | 6 +
.../asm/mach-loongson64/builtin_dtbs.h | 1 +
.../include/asm/mach-loongson64/loongson.h | 3 +-
arch/mips/loongson64/env.c | 13 +-
arch/mips/loongson64/init.c | 21 +-
arch/mips/loongson64/time.c | 20 +
drivers/irqchip/irq-loongson-liointc.c | 55 ++-
12 files changed, 716 insertions(+), 17 deletions(-)
create mode 100644 arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
create mode 100644 arch/mips/boot/dts/loongson/loongson64_2core_2k1000.dts
create mode 100644 arch/mips/configs/loongson2k_defconfig
--
2.20.1
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH v3 0/7] Add basic support for Loongson-2K1000
@ 2021-03-06 2:27 Qing Zhang
0 siblings, 0 replies; 3+ messages in thread
From: Qing Zhang @ 2021-03-06 2:27 UTC (permalink / raw)
To: Huacai Chen, Jiaxun Yang, Thomas Bogendoerfer, Thomas Gleixner,
Marc Zyngier
Cc: linux-mips, linux-kernel, wangming01
These patches support single-core DTS boot to the serial port login
interface, which can be operated using conventional commands.
I have successfully tested it on the Loongson 2K1000 machine.
pmon: http://cgit.loongnix.org/cgit/pmon-loongson3/
Qing Zhang (7):
MIPS: Loongson64: DeviceTree for 2K1000
MIPS: Loongson64: Distinguish firmware dependencies DTB/LEFI
MIPS: Loongson64: Add support for the 2K1000 to get cpu_clock_freq
MIPS: Loongson64: Add 2K1000 early_printk_port
irqchip/loongson-liointc: irqchip add 2.0 version
dt-bindings: interrupt-controller: Add Loongson-2K1000 LIOINTC
MIPS: Loongson64: Add a Loongson-2k default config file
.../loongson,liointc.yaml | 7 +-
arch/mips/boot/dts/loongson/Makefile | 1 +
.../boot/dts/loongson/loongson64-2k1000.dtsi | 243 ++++++++++++
.../dts/loongson/loongson64_2core_2k1000.dts | 10 +
arch/mips/configs/loongson2k_defconfig | 353 ++++++++++++++++++
.../include/asm/mach-loongson64/boot_param.h | 6 +
.../asm/mach-loongson64/builtin_dtbs.h | 1 +
.../include/asm/mach-loongson64/loongson.h | 3 +-
arch/mips/loongson64/env.c | 13 +-
arch/mips/loongson64/init.c | 21 +-
arch/mips/loongson64/time.c | 20 +
drivers/irqchip/irq-loongson-liointc.c | 55 ++-
12 files changed, 716 insertions(+), 17 deletions(-)
create mode 100644 arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
create mode 100644 arch/mips/boot/dts/loongson/loongson64_2core_2k1000.dts
create mode 100644 arch/mips/configs/loongson2k_defconfig
--
2.20.1
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH v3 0/7] Add basic support for Loongson-2K1000
@ 2021-03-06 2:36 Qing Zhang
0 siblings, 0 replies; 3+ messages in thread
From: Qing Zhang @ 2021-03-06 2:36 UTC (permalink / raw)
To: Huacai Chen, Jiaxun Yang, Thomas Bogendoerfer, Thomas Gleixner,
Marc Zyngier
Cc: linux-mips, linux-kernel, wangming01
These patches support single-core DTS boot to the serial port login
interface, which can be operated using conventional commands.
I have successfully tested it on the Loongson 2K1000 machine.
pmon: http://cgit.loongnix.org/cgit/pmon-loongson3/
Qing Zhang (7):
MIPS: Loongson64: DeviceTree for 2K1000
MIPS: Loongson64: Distinguish firmware dependencies DTB/LEFI
MIPS: Loongson64: Add support for the 2K1000 to get cpu_clock_freq
MIPS: Loongson64: Add 2K1000 early_printk_port
irqchip/loongson-liointc: irqchip add 2.0 version
dt-bindings: interrupt-controller: Add Loongson-2K1000 LIOINTC
MIPS: Loongson64: Add a Loongson-2k default config file
.../loongson,liointc.yaml | 7 +-
arch/mips/boot/dts/loongson/Makefile | 1 +
.../boot/dts/loongson/loongson64-2k1000.dtsi | 243 ++++++++++++
.../dts/loongson/loongson64_2core_2k1000.dts | 10 +
arch/mips/configs/loongson2k_defconfig | 353 ++++++++++++++++++
.../include/asm/mach-loongson64/boot_param.h | 6 +
.../asm/mach-loongson64/builtin_dtbs.h | 1 +
.../include/asm/mach-loongson64/loongson.h | 3 +-
arch/mips/loongson64/env.c | 13 +-
arch/mips/loongson64/init.c | 21 +-
arch/mips/loongson64/time.c | 20 +
drivers/irqchip/irq-loongson-liointc.c | 55 ++-
12 files changed, 716 insertions(+), 17 deletions(-)
create mode 100644 arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
create mode 100644 arch/mips/boot/dts/loongson/loongson64_2core_2k1000.dts
create mode 100644 arch/mips/configs/loongson2k_defconfig
--
2.20.1
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-03-06 2:37 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-05 10:18 [PATCH v3 0/7] Add basic support for Loongson-2K1000 Qing Zhang
2021-03-06 2:27 Qing Zhang
2021-03-06 2:36 Qing Zhang
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.