[PATCH v4 0/3] Add support for secure regions in Qcom NANDc driver

[PATCH v4 0/3] Add support for secure regions in Qcom NANDc driver

[Manivannan Sadhasivam]

On a typical end product, a vendor may choose to secure some regions in
the NAND memory which are supposed to stay intact between FW upgrades.
The access to those regions will be blocked by a secure element like
Trustzone. So the normal world software like Linux kernel should not
touch these regions (including reading).

So this series adds a property for declaring such secure regions in DT
so that the driver can skip touching them. While at it, the Qcom NANDc
DT binding is also converted to YAML format.

Thanks,
Mani

Changes in v4:

* Used "uint32-matrix" instead of "uint32-array" as per Rob's review.
* Collected Rob's review tag for binding conversion patch

Changes in v3:

* Removed the nand prefix from DT property and moved the property parsing
  logic before nand_scan() in driver.

Changes in v2:

* Moved the secure-regions property to generic NAND binding as a NAND
  chip property and renamed it as "nand-secure-regions".

Manivannan Sadhasivam (3):
  dt-bindings: mtd: Convert Qcom NANDc binding to YAML
  dt-bindings: mtd: Add a property to declare secure regions in NAND
    chips
  mtd: rawnand: qcom: Add support for secure regions in NAND memory

 .../bindings/mtd/nand-controller.yaml         |   7 +
 .../devicetree/bindings/mtd/qcom,nandc.yaml   | 196 ++++++++++++++++++
 .../devicetree/bindings/mtd/qcom_nandc.txt    | 142 -------------
 drivers/mtd/nand/raw/qcom_nandc.c             |  72 ++++++-
 4 files changed, 266 insertions(+), 151 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
 delete mode 100644 Documentation/devicetree/bindings/mtd/qcom_nandc.txt

-- 
2.25.1

[PATCH v4 0/3] Add support for secure regions in Qcom NANDc driver

[Manivannan Sadhasivam]

On a typical end product, a vendor may choose to secure some regions in
the NAND memory which are supposed to stay intact between FW upgrades.
The access to those regions will be blocked by a secure element like
Trustzone. So the normal world software like Linux kernel should not
touch these regions (including reading).

So this series adds a property for declaring such secure regions in DT
so that the driver can skip touching them. While at it, the Qcom NANDc
DT binding is also converted to YAML format.

Thanks,
Mani

Changes in v4:

* Used "uint32-matrix" instead of "uint32-array" as per Rob's review.
* Collected Rob's review tag for binding conversion patch

Changes in v3:

* Removed the nand prefix from DT property and moved the property parsing
  logic before nand_scan() in driver.

Changes in v2:

* Moved the secure-regions property to generic NAND binding as a NAND
  chip property and renamed it as "nand-secure-regions".

Manivannan Sadhasivam (3):
  dt-bindings: mtd: Convert Qcom NANDc binding to YAML
  dt-bindings: mtd: Add a property to declare secure regions in NAND
    chips
  mtd: rawnand: qcom: Add support for secure regions in NAND memory

 .../bindings/mtd/nand-controller.yaml         |   7 +
 .../devicetree/bindings/mtd/qcom,nandc.yaml   | 196 ++++++++++++++++++
 .../devicetree/bindings/mtd/qcom_nandc.txt    | 142 -------------
 drivers/mtd/nand/raw/qcom_nandc.c             |  72 ++++++-
 4 files changed, 266 insertions(+), 151 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
 delete mode 100644 Documentation/devicetree/bindings/mtd/qcom_nandc.txt

-- 
2.25.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v4 1/3] dt-bindings: mtd: Convert Qcom NANDc binding to YAML

[Manivannan Sadhasivam]

Convert Qcom NANDc devicetree binding to YAML.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/mtd/qcom,nandc.yaml   | 196 ++++++++++++++++++
 .../devicetree/bindings/mtd/qcom_nandc.txt    | 142 -------------
 2 files changed, 196 insertions(+), 142 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
 delete mode 100644 Documentation/devicetree/bindings/mtd/qcom_nandc.txt

diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
new file mode 100644
index 000000000000..84ad7ff30121
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
@@ -0,0 +1,196 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/qcom,nandc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm NAND controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq806x-nand
+      - qcom,ipq4019-nand
+      - qcom,ipq6018-nand
+      - qcom,ipq8074-nand
+      - qcom,sdx55-nand
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Core Clock
+      - description: Always ON Clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: aon
+
+  "#address-cells": true
+  "#size-cells": true
+
+patternProperties:
+  "^nand@[a-f0-9]$":
+    type: object
+    properties:
+      nand-bus-width:
+        const: 8
+
+      nand-ecc-strength:
+        enum: [1, 4, 8]
+
+      nand-ecc-step-size:
+        enum:
+          - 512
+
+allOf:
+  - $ref: "nand-controller.yaml#"
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,ipq806x-nand
+    then:
+      properties:
+        dmas:
+          items:
+            - description: rxtx DMA channel
+
+        dma-names:
+          items:
+            - const: rxtx
+
+        qcom,cmd-crci:
+          $ref: /schemas/types.yaml#/definitions/uint32
+          description:
+            Must contain the ADM command type CRCI block instance number
+            specified for the NAND controller on the given platform
+
+        qcom,data-crci:
+          $ref: /schemas/types.yaml#/definitions/uint32
+          description:
+            Must contain the ADM data type CRCI block instance number
+            specified for the NAND controller on the given platform
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq4019-nand
+              - qcom,ipq6018-nand
+              - qcom,ipq8074-nand
+              - qcom,sdx55-nand
+
+    then:
+      properties:
+        dmas:
+          items:
+            - description: tx DMA channel
+            - description: rx DMA channel
+            - description: cmd DMA channel
+
+        dma-names:
+          items:
+            - const: tx
+            - const: rx
+            - const: cmd
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+    nand-controller@1ac00000 {
+      compatible = "qcom,ipq806x-nand";
+      reg = <0x1ac00000 0x800>;
+
+      clocks = <&gcc EBI2_CLK>,
+               <&gcc EBI2_AON_CLK>;
+      clock-names = "core", "aon";
+
+      dmas = <&adm_dma 3>;
+      dma-names = "rxtx";
+      qcom,cmd-crci = <15>;
+      qcom,data-crci = <3>;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      nand@0 {
+        reg = <0>;
+
+        nand-ecc-strength = <4>;
+        nand-bus-width = <8>;
+
+        partitions {
+          compatible = "fixed-partitions";
+          #address-cells = <1>;
+          #size-cells = <1>;
+
+          partition@0 {
+            label = "boot-nand";
+            reg = <0 0x58a0000>;
+          };
+
+          partition@58a0000 {
+            label = "fs-nand";
+            reg = <0x58a0000 0x4000000>;
+          };
+        };
+      };
+    };
+
+    #include <dt-bindings/clock/qcom,gcc-ipq4019.h>
+    nand-controller@79b0000 {
+      compatible = "qcom,ipq4019-nand";
+      reg = <0x79b0000 0x1000>;
+
+      clocks = <&gcc GCC_QPIC_CLK>,
+               <&gcc GCC_QPIC_AHB_CLK>;
+      clock-names = "core", "aon";
+
+      dmas = <&qpicbam 0>,
+             <&qpicbam 1>,
+             <&qpicbam 2>;
+      dma-names = "tx", "rx", "cmd";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      nand@0 {
+        reg = <0>;
+        nand-ecc-strength = <4>;
+        nand-bus-width = <8>;
+
+        partitions {
+          compatible = "fixed-partitions";
+          #address-cells = <1>;
+          #size-cells = <1>;
+
+          partition@0 {
+            label = "boot-nand";
+            reg = <0 0x58a0000>;
+          };
+
+          partition@58a0000 {
+            label = "fs-nand";
+            reg = <0x58a0000 0x4000000>;
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
deleted file mode 100644
index 5647913d8837..000000000000
--- a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
+++ /dev/null
@@ -1,142 +0,0 @@
-* Qualcomm NAND controller
-
-Required properties:
-- compatible:		must be one of the following:
-    * "qcom,ipq806x-nand" - for EBI2 NAND controller being used in IPQ806x
-			    SoC and it uses ADM DMA
-    * "qcom,ipq4019-nand" - for QPIC NAND controller v1.4.0 being used in
-                            IPQ4019 SoC and it uses BAM DMA
-    * "qcom,ipq6018-nand" - for QPIC NAND controller v1.5.0 being used in
-                            IPQ6018 SoC and it uses BAM DMA
-    * "qcom,ipq8074-nand" - for QPIC NAND controller v1.5.0 being used in
-                            IPQ8074 SoC and it uses BAM DMA
-    * "qcom,sdx55-nand"   - for QPIC NAND controller v2.0.0 being used in
-                            SDX55 SoC and it uses BAM DMA
-
-- reg:			MMIO address range
-- clocks:		must contain core clock and always on clock
-- clock-names:		must contain "core" for the core clock and "aon" for the
-			always on clock
-
-EBI2 specific properties:
-- dmas:			DMA specifier, consisting of a phandle to the ADM DMA
-			controller node and the channel number to be used for
-			NAND. Refer to dma.txt and qcom_adm.txt for more details
-- dma-names:		must be "rxtx"
-- qcom,cmd-crci:	must contain the ADM command type CRCI block instance
-			number specified for the NAND controller on the given
-			platform
-- qcom,data-crci:	must contain the ADM data type CRCI block instance
-			number specified for the NAND controller on the given
-			platform
-
-QPIC specific properties:
-- dmas:			DMA specifier, consisting of a phandle to the BAM DMA
-			and the channel number to be used for NAND. Refer to
-			dma.txt, qcom_bam_dma.txt for more details
-- dma-names:		must contain all 3 channel names : "tx", "rx", "cmd"
-- #address-cells:	<1> - subnodes give the chip-select number
-- #size-cells:		<0>
-
-* NAND chip-select
-
-Each controller may contain one or more subnodes to represent enabled
-chip-selects which (may) contain NAND flash chips. Their properties are as
-follows.
-
-Required properties:
-- reg:			a single integer representing the chip-select
-			number (e.g., 0, 1, 2, etc.)
-- #address-cells:	see partition.txt
-- #size-cells:		see partition.txt
-
-Optional properties:
-- nand-bus-width:	see nand-controller.yaml
-- nand-ecc-strength:	see nand-controller.yaml. If not specified, then ECC strength will
-			be used according to chip requirement and available
-			OOB size.
-
-Each nandcs device node may optionally contain a 'partitions' sub-node, which
-further contains sub-nodes describing the flash partition mapping. See
-partition.txt for more detail.
-
-Example:
-
-nand-controller@1ac00000 {
-	compatible = "qcom,ipq806x-nand";
-	reg = <0x1ac00000 0x800>;
-
-	clocks = <&gcc EBI2_CLK>,
-		 <&gcc EBI2_AON_CLK>;
-	clock-names = "core", "aon";
-
-	dmas = <&adm_dma 3>;
-	dma-names = "rxtx";
-	qcom,cmd-crci = <15>;
-	qcom,data-crci = <3>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	nand@0 {
-		reg = <0>;
-
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "boot-nand";
-				reg = <0 0x58a0000>;
-			};
-
-			partition@58a0000 {
-				label = "fs-nand";
-				reg = <0x58a0000 0x4000000>;
-			};
-		};
-	};
-};
-
-nand-controller@79b0000 {
-	compatible = "qcom,ipq4019-nand";
-	reg = <0x79b0000 0x1000>;
-
-	clocks = <&gcc GCC_QPIC_CLK>,
-		<&gcc GCC_QPIC_AHB_CLK>;
-	clock-names = "core", "aon";
-
-	dmas = <&qpicbam 0>,
-		<&qpicbam 1>,
-		<&qpicbam 2>;
-	dma-names = "tx", "rx", "cmd";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	nand@0 {
-		reg = <0>;
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "boot-nand";
-				reg = <0 0x58a0000>;
-			};
-
-			partition@58a0000 {
-				label = "fs-nand";
-				reg = <0x58a0000 0x4000000>;
-			};
-		};
-	};
-};
-- 
2.25.1

[PATCH v4 1/3] dt-bindings: mtd: Convert Qcom NANDc binding to YAML

[Manivannan Sadhasivam]

Convert Qcom NANDc devicetree binding to YAML.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/mtd/qcom,nandc.yaml   | 196 ++++++++++++++++++
 .../devicetree/bindings/mtd/qcom_nandc.txt    | 142 -------------
 2 files changed, 196 insertions(+), 142 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
 delete mode 100644 Documentation/devicetree/bindings/mtd/qcom_nandc.txt

diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
new file mode 100644
index 000000000000..84ad7ff30121
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
@@ -0,0 +1,196 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/qcom,nandc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm NAND controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq806x-nand
+      - qcom,ipq4019-nand
+      - qcom,ipq6018-nand
+      - qcom,ipq8074-nand
+      - qcom,sdx55-nand
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Core Clock
+      - description: Always ON Clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: aon
+
+  "#address-cells": true
+  "#size-cells": true
+
+patternProperties:
+  "^nand@[a-f0-9]$":
+    type: object
+    properties:
+      nand-bus-width:
+        const: 8
+
+      nand-ecc-strength:
+        enum: [1, 4, 8]
+
+      nand-ecc-step-size:
+        enum:
+          - 512
+
+allOf:
+  - $ref: "nand-controller.yaml#"
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,ipq806x-nand
+    then:
+      properties:
+        dmas:
+          items:
+            - description: rxtx DMA channel
+
+        dma-names:
+          items:
+            - const: rxtx
+
+        qcom,cmd-crci:
+          $ref: /schemas/types.yaml#/definitions/uint32
+          description:
+            Must contain the ADM command type CRCI block instance number
+            specified for the NAND controller on the given platform
+
+        qcom,data-crci:
+          $ref: /schemas/types.yaml#/definitions/uint32
+          description:
+            Must contain the ADM data type CRCI block instance number
+            specified for the NAND controller on the given platform
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq4019-nand
+              - qcom,ipq6018-nand
+              - qcom,ipq8074-nand
+              - qcom,sdx55-nand
+
+    then:
+      properties:
+        dmas:
+          items:
+            - description: tx DMA channel
+            - description: rx DMA channel
+            - description: cmd DMA channel
+
+        dma-names:
+          items:
+            - const: tx
+            - const: rx
+            - const: cmd
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+    nand-controller@1ac00000 {
+      compatible = "qcom,ipq806x-nand";
+      reg = <0x1ac00000 0x800>;
+
+      clocks = <&gcc EBI2_CLK>,
+               <&gcc EBI2_AON_CLK>;
+      clock-names = "core", "aon";
+
+      dmas = <&adm_dma 3>;
+      dma-names = "rxtx";
+      qcom,cmd-crci = <15>;
+      qcom,data-crci = <3>;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      nand@0 {
+        reg = <0>;
+
+        nand-ecc-strength = <4>;
+        nand-bus-width = <8>;
+
+        partitions {
+          compatible = "fixed-partitions";
+          #address-cells = <1>;
+          #size-cells = <1>;
+
+          partition@0 {
+            label = "boot-nand";
+            reg = <0 0x58a0000>;
+          };
+
+          partition@58a0000 {
+            label = "fs-nand";
+            reg = <0x58a0000 0x4000000>;
+          };
+        };
+      };
+    };
+
+    #include <dt-bindings/clock/qcom,gcc-ipq4019.h>
+    nand-controller@79b0000 {
+      compatible = "qcom,ipq4019-nand";
+      reg = <0x79b0000 0x1000>;
+
+      clocks = <&gcc GCC_QPIC_CLK>,
+               <&gcc GCC_QPIC_AHB_CLK>;
+      clock-names = "core", "aon";
+
+      dmas = <&qpicbam 0>,
+             <&qpicbam 1>,
+             <&qpicbam 2>;
+      dma-names = "tx", "rx", "cmd";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      nand@0 {
+        reg = <0>;
+        nand-ecc-strength = <4>;
+        nand-bus-width = <8>;
+
+        partitions {
+          compatible = "fixed-partitions";
+          #address-cells = <1>;
+          #size-cells = <1>;
+
+          partition@0 {
+            label = "boot-nand";
+            reg = <0 0x58a0000>;
+          };
+
+          partition@58a0000 {
+            label = "fs-nand";
+            reg = <0x58a0000 0x4000000>;
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
deleted file mode 100644
index 5647913d8837..000000000000
--- a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
+++ /dev/null
@@ -1,142 +0,0 @@
-* Qualcomm NAND controller
-
-Required properties:
-- compatible:		must be one of the following:
-    * "qcom,ipq806x-nand" - for EBI2 NAND controller being used in IPQ806x
-			    SoC and it uses ADM DMA
-    * "qcom,ipq4019-nand" - for QPIC NAND controller v1.4.0 being used in
-                            IPQ4019 SoC and it uses BAM DMA
-    * "qcom,ipq6018-nand" - for QPIC NAND controller v1.5.0 being used in
-                            IPQ6018 SoC and it uses BAM DMA
-    * "qcom,ipq8074-nand" - for QPIC NAND controller v1.5.0 being used in
-                            IPQ8074 SoC and it uses BAM DMA
-    * "qcom,sdx55-nand"   - for QPIC NAND controller v2.0.0 being used in
-                            SDX55 SoC and it uses BAM DMA
-
-- reg:			MMIO address range
-- clocks:		must contain core clock and always on clock
-- clock-names:		must contain "core" for the core clock and "aon" for the
-			always on clock
-
-EBI2 specific properties:
-- dmas:			DMA specifier, consisting of a phandle to the ADM DMA
-			controller node and the channel number to be used for
-			NAND. Refer to dma.txt and qcom_adm.txt for more details
-- dma-names:		must be "rxtx"
-- qcom,cmd-crci:	must contain the ADM command type CRCI block instance
-			number specified for the NAND controller on the given
-			platform
-- qcom,data-crci:	must contain the ADM data type CRCI block instance
-			number specified for the NAND controller on the given
-			platform
-
-QPIC specific properties:
-- dmas:			DMA specifier, consisting of a phandle to the BAM DMA
-			and the channel number to be used for NAND. Refer to
-			dma.txt, qcom_bam_dma.txt for more details
-- dma-names:		must contain all 3 channel names : "tx", "rx", "cmd"
-- #address-cells:	<1> - subnodes give the chip-select number
-- #size-cells:		<0>
-
-* NAND chip-select
-
-Each controller may contain one or more subnodes to represent enabled
-chip-selects which (may) contain NAND flash chips. Their properties are as
-follows.
-
-Required properties:
-- reg:			a single integer representing the chip-select
-			number (e.g., 0, 1, 2, etc.)
-- #address-cells:	see partition.txt
-- #size-cells:		see partition.txt
-
-Optional properties:
-- nand-bus-width:	see nand-controller.yaml
-- nand-ecc-strength:	see nand-controller.yaml. If not specified, then ECC strength will
-			be used according to chip requirement and available
-			OOB size.
-
-Each nandcs device node may optionally contain a 'partitions' sub-node, which
-further contains sub-nodes describing the flash partition mapping. See
-partition.txt for more detail.
-
-Example:
-
-nand-controller@1ac00000 {
-	compatible = "qcom,ipq806x-nand";
-	reg = <0x1ac00000 0x800>;
-
-	clocks = <&gcc EBI2_CLK>,
-		 <&gcc EBI2_AON_CLK>;
-	clock-names = "core", "aon";
-
-	dmas = <&adm_dma 3>;
-	dma-names = "rxtx";
-	qcom,cmd-crci = <15>;
-	qcom,data-crci = <3>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	nand@0 {
-		reg = <0>;
-
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "boot-nand";
-				reg = <0 0x58a0000>;
-			};
-
-			partition@58a0000 {
-				label = "fs-nand";
-				reg = <0x58a0000 0x4000000>;
-			};
-		};
-	};
-};
-
-nand-controller@79b0000 {
-	compatible = "qcom,ipq4019-nand";
-	reg = <0x79b0000 0x1000>;
-
-	clocks = <&gcc GCC_QPIC_CLK>,
-		<&gcc GCC_QPIC_AHB_CLK>;
-	clock-names = "core", "aon";
-
-	dmas = <&qpicbam 0>,
-		<&qpicbam 1>,
-		<&qpicbam 2>;
-	dma-names = "tx", "rx", "cmd";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	nand@0 {
-		reg = <0>;
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "boot-nand";
-				reg = <0 0x58a0000>;
-			};
-
-			partition@58a0000 {
-				label = "fs-nand";
-				reg = <0x58a0000 0x4000000>;
-			};
-		};
-	};
-};
-- 
2.25.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v4 2/3] dt-bindings: mtd: Add a property to declare secure regions in NAND chips

[Manivannan Sadhasivam]

On a typical end product, a vendor may choose to secure some regions in
the NAND memory which are supposed to stay intact between FW upgrades.
The access to those regions will be blocked by a secure element like
Trustzone. So the normal world software like Linux kernel should not
touch these regions (including reading).

So let's add a property for declaring such secure regions so that the
drivers can skip touching them.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 Documentation/devicetree/bindings/mtd/nand-controller.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index d0e422f4b3e0..15a674bedca3 100644
--- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -143,6 +143,13 @@ patternProperties:
           Ready/Busy pins. Active state refers to the NAND ready state and
           should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted.
 
+      secure-regions:
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        description:
+          Regions in the NAND chip which are protected using a secure element
+          like Trustzone. This property contains the start address and size of
+          the secure regions present.
+
     required:
       - reg
 
-- 
2.25.1

[PATCH v4 2/3] dt-bindings: mtd: Add a property to declare secure regions in NAND chips

[Manivannan Sadhasivam]

On a typical end product, a vendor may choose to secure some regions in
the NAND memory which are supposed to stay intact between FW upgrades.
The access to those regions will be blocked by a secure element like
Trustzone. So the normal world software like Linux kernel should not
touch these regions (including reading).

So let's add a property for declaring such secure regions so that the
drivers can skip touching them.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 Documentation/devicetree/bindings/mtd/nand-controller.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index d0e422f4b3e0..15a674bedca3 100644
--- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -143,6 +143,13 @@ patternProperties:
           Ready/Busy pins. Active state refers to the NAND ready state and
           should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted.
 
+      secure-regions:
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        description:
+          Regions in the NAND chip which are protected using a secure element
+          like Trustzone. This property contains the start address and size of
+          the secure regions present.
+
     required:
       - reg
 
-- 
2.25.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v4 2/3] dt-bindings: mtd: Add a property to declare secure regions in NAND chips

[Boris Brezillon]

On Mon,  8 Mar 2021 11:14:46 +0530
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> wrote:

> On a typical end product, a vendor may choose to secure some regions in
> the NAND memory which are supposed to stay intact between FW upgrades.
> The access to those regions will be blocked by a secure element like
> Trustzone. So the normal world software like Linux kernel should not
> touch these regions (including reading).
> 
> So let's add a property for declaring such secure regions so that the
> drivers can skip touching them.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>  Documentation/devicetree/bindings/mtd/nand-controller.yaml | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> index d0e422f4b3e0..15a674bedca3 100644
> --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> @@ -143,6 +143,13 @@ patternProperties:
>            Ready/Busy pins. Active state refers to the NAND ready state and
>            should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted.
>  
> +      secure-regions:
> +        $ref: /schemas/types.yaml#/definitions/uint32-matrix
> +        description:
> +          Regions in the NAND chip which are protected using a secure element
> +          like Trustzone. This property contains the start address and size of
> +          the secure regions present.
> +

Since you declare this as a generic property, I think it'd be simpler
to do the check at the core level.

>      required:
>        - reg
>  

Re: [PATCH v4 2/3] dt-bindings: mtd: Add a property to declare secure regions in NAND chips

[Boris Brezillon]

On Mon,  8 Mar 2021 11:14:46 +0530
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> wrote:

> On a typical end product, a vendor may choose to secure some regions in
> the NAND memory which are supposed to stay intact between FW upgrades.
> The access to those regions will be blocked by a secure element like
> Trustzone. So the normal world software like Linux kernel should not
> touch these regions (including reading).
> 
> So let's add a property for declaring such secure regions so that the
> drivers can skip touching them.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>  Documentation/devicetree/bindings/mtd/nand-controller.yaml | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> index d0e422f4b3e0..15a674bedca3 100644
> --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> @@ -143,6 +143,13 @@ patternProperties:
>            Ready/Busy pins. Active state refers to the NAND ready state and
>            should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted.
>  
> +      secure-regions:
> +        $ref: /schemas/types.yaml#/definitions/uint32-matrix
> +        description:
> +          Regions in the NAND chip which are protected using a secure element
> +          like Trustzone. This property contains the start address and size of
> +          the secure regions present.
> +

Since you declare this as a generic property, I think it'd be simpler
to do the check at the core level.

>      required:
>        - reg
>  


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v4 2/3] dt-bindings: mtd: Add a property to declare secure regions in NAND chips

[Manivannan Sadhasivam]

On Mon, Mar 08, 2021 at 10:10:59AM +0100, Boris Brezillon wrote:
> On Mon,  8 Mar 2021 11:14:46 +0530
> Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> wrote:
> 
> > On a typical end product, a vendor may choose to secure some regions in
> > the NAND memory which are supposed to stay intact between FW upgrades.
> > The access to those regions will be blocked by a secure element like
> > Trustzone. So the normal world software like Linux kernel should not
> > touch these regions (including reading).
> > 
> > So let's add a property for declaring such secure regions so that the
> > drivers can skip touching them.
> > 
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> >  Documentation/devicetree/bindings/mtd/nand-controller.yaml | 7 +++++++
> >  1 file changed, 7 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> > index d0e422f4b3e0..15a674bedca3 100644
> > --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> > +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> > @@ -143,6 +143,13 @@ patternProperties:
> >            Ready/Busy pins. Active state refers to the NAND ready state and
> >            should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted.
> >  
> > +      secure-regions:
> > +        $ref: /schemas/types.yaml#/definitions/uint32-matrix
> > +        description:
> > +          Regions in the NAND chip which are protected using a secure element
> > +          like Trustzone. This property contains the start address and size of
> > +          the secure regions present.
> > +
> 
> Since you declare this as a generic property, I think it'd be simpler
> to do the check at the core level.
> 

Hmm, so have the parsing logic in qcom driver and check in core or both parsing
and check in core?

I don't think the first one makes sense.

Thanks,
Mani

> >      required:
> >        - reg
> >  
> 

Re: [PATCH v4 2/3] dt-bindings: mtd: Add a property to declare secure regions in NAND chips

[Manivannan Sadhasivam]

On Mon, Mar 08, 2021 at 10:10:59AM +0100, Boris Brezillon wrote:
> On Mon,  8 Mar 2021 11:14:46 +0530
> Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> wrote:
> 
> > On a typical end product, a vendor may choose to secure some regions in
> > the NAND memory which are supposed to stay intact between FW upgrades.
> > The access to those regions will be blocked by a secure element like
> > Trustzone. So the normal world software like Linux kernel should not
> > touch these regions (including reading).
> > 
> > So let's add a property for declaring such secure regions so that the
> > drivers can skip touching them.
> > 
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> >  Documentation/devicetree/bindings/mtd/nand-controller.yaml | 7 +++++++
> >  1 file changed, 7 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> > index d0e422f4b3e0..15a674bedca3 100644
> > --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> > +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> > @@ -143,6 +143,13 @@ patternProperties:
> >            Ready/Busy pins. Active state refers to the NAND ready state and
> >            should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted.
> >  
> > +      secure-regions:
> > +        $ref: /schemas/types.yaml#/definitions/uint32-matrix
> > +        description:
> > +          Regions in the NAND chip which are protected using a secure element
> > +          like Trustzone. This property contains the start address and size of
> > +          the secure regions present.
> > +
> 
> Since you declare this as a generic property, I think it'd be simpler
> to do the check at the core level.
> 

Hmm, so have the parsing logic in qcom driver and check in core or both parsing
and check in core?

I don't think the first one makes sense.

Thanks,
Mani

> >      required:
> >        - reg
> >  
> 

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v4 2/3] dt-bindings: mtd: Add a property to declare secure regions in NAND chips

[Boris Brezillon]

On Mon, 8 Mar 2021 19:01:34 +0530
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> wrote:

> On Mon, Mar 08, 2021 at 10:10:59AM +0100, Boris Brezillon wrote:
> > On Mon,  8 Mar 2021 11:14:46 +0530
> > Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> wrote:
> >   
> > > On a typical end product, a vendor may choose to secure some regions in
> > > the NAND memory which are supposed to stay intact between FW upgrades.
> > > The access to those regions will be blocked by a secure element like
> > > Trustzone. So the normal world software like Linux kernel should not
> > > touch these regions (including reading).
> > > 
> > > So let's add a property for declaring such secure regions so that the
> > > drivers can skip touching them.
> > > 
> > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > > ---
> > >  Documentation/devicetree/bindings/mtd/nand-controller.yaml | 7 +++++++
> > >  1 file changed, 7 insertions(+)
> > > 
> > > diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> > > index d0e422f4b3e0..15a674bedca3 100644
> > > --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> > > +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> > > @@ -143,6 +143,13 @@ patternProperties:
> > >            Ready/Busy pins. Active state refers to the NAND ready state and
> > >            should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted.
> > >  
> > > +      secure-regions:
> > > +        $ref: /schemas/types.yaml#/definitions/uint32-matrix
> > > +        description:
> > > +          Regions in the NAND chip which are protected using a secure element
> > > +          like Trustzone. This property contains the start address and size of
> > > +          the secure regions present.
> > > +  
> > 
> > Since you declare this as a generic property, I think it'd be simpler
> > to do the check at the core level.
> >   
> 
> Hmm, so have the parsing logic in qcom driver and check in core or both parsing
> and check in core?

Both in the core.

Re: [PATCH v4 2/3] dt-bindings: mtd: Add a property to declare secure regions in NAND chips

[Boris Brezillon]

On Mon, 8 Mar 2021 19:01:34 +0530
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> wrote:

> On Mon, Mar 08, 2021 at 10:10:59AM +0100, Boris Brezillon wrote:
> > On Mon,  8 Mar 2021 11:14:46 +0530
> > Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> wrote:
> >   
> > > On a typical end product, a vendor may choose to secure some regions in
> > > the NAND memory which are supposed to stay intact between FW upgrades.
> > > The access to those regions will be blocked by a secure element like
> > > Trustzone. So the normal world software like Linux kernel should not
> > > touch these regions (including reading).
> > > 
> > > So let's add a property for declaring such secure regions so that the
> > > drivers can skip touching them.
> > > 
> > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > > ---
> > >  Documentation/devicetree/bindings/mtd/nand-controller.yaml | 7 +++++++
> > >  1 file changed, 7 insertions(+)
> > > 
> > > diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> > > index d0e422f4b3e0..15a674bedca3 100644
> > > --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> > > +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> > > @@ -143,6 +143,13 @@ patternProperties:
> > >            Ready/Busy pins. Active state refers to the NAND ready state and
> > >            should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted.
> > >  
> > > +      secure-regions:
> > > +        $ref: /schemas/types.yaml#/definitions/uint32-matrix
> > > +        description:
> > > +          Regions in the NAND chip which are protected using a secure element
> > > +          like Trustzone. This property contains the start address and size of
> > > +          the secure regions present.
> > > +  
> > 
> > Since you declare this as a generic property, I think it'd be simpler
> > to do the check at the core level.
> >   
> 
> Hmm, so have the parsing logic in qcom driver and check in core or both parsing
> and check in core?

Both in the core.

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v4 3/3] mtd: rawnand: qcom: Add support for secure regions in NAND memory

[Manivannan Sadhasivam]

On a typical end product, a vendor may choose to secure some regions in
the NAND memory which are supposed to stay intact between FW upgrades.
The access to those regions will be blocked by a secure element like
Trustzone. So the normal world software like Linux kernel should not
touch these regions (including reading).

The regions are declared using a NAND chip DT property,
"secure-regions". So let's make use of this property and skip
access to the secure regions present in a system.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/mtd/nand/raw/qcom_nandc.c | 72 +++++++++++++++++++++++++++----
 1 file changed, 63 insertions(+), 9 deletions(-)

diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 87c23bb320bf..8027f7cb32be 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -431,6 +431,11 @@ struct qcom_nand_controller {
  * @cfg0, cfg1, cfg0_raw..:	NANDc register configurations needed for
  *				ecc/non-ecc mode for the current nand flash
  *				device
+ *
+ * @sec_regions:		Array representing the secure regions in the
+ *				NAND chip
+ *
+ * @nr_sec_regions:		Number of secure regions in the NAND chip
  */
 struct qcom_nand_host {
 	struct nand_chip chip;
@@ -453,6 +458,9 @@ struct qcom_nand_host {
 	u32 ecc_bch_cfg;
 	u32 clrflashstatus;
 	u32 clrreadstatus;
+
+	u32 *sec_regions;
+	u8 nr_sec_regions;
 };
 
 /*
@@ -662,16 +670,27 @@ static void nandc_set_reg(struct qcom_nand_controller *nandc, int offset,
 }
 
 /* helper to configure address register values */
-static void set_address(struct qcom_nand_host *host, u16 column, int page)
+static int set_address(struct qcom_nand_host *host, u16 column, int page)
 {
 	struct nand_chip *chip = &host->chip;
 	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+	u32 offs = page << chip->page_shift;
+	int i, j;
+
+	/* Skip touching the secure regions if present */
+	for (i = 0, j = 0; i < host->nr_sec_regions; i++, j += 2) {
+		if (offs >= host->sec_regions[j] &&
+		    (offs <= host->sec_regions[j] + host->sec_regions[j + 1]))
+			return -EIO;
+	}
 
 	if (chip->options & NAND_BUSWIDTH_16)
 		column >>= 1;
 
 	nandc_set_reg(nandc, NAND_ADDR0, page << 16 | column);
 	nandc_set_reg(nandc, NAND_ADDR1, page >> 16 & 0xff);
+
+	return 0;
 }
 
 /*
@@ -1491,13 +1510,13 @@ static void qcom_nandc_command(struct nand_chip *chip, unsigned int command,
 		WARN_ON(column != 0);
 
 		host->use_ecc = true;
-		set_address(host, 0, page_addr);
+		ret = set_address(host, 0, page_addr);
 		update_rw_regs(host, ecc->steps, true);
 		break;
 
 	case NAND_CMD_SEQIN:
 		WARN_ON(column != 0);
-		set_address(host, 0, page_addr);
+		ret = set_address(host, 0, page_addr);
 		break;
 
 	case NAND_CMD_PAGEPROG:
@@ -1615,7 +1634,10 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
 	host->use_ecc = false;
 
 	clear_bam_transaction(nandc);
-	set_address(host, host->cw_size * cw, page);
+	ret = set_address(host, host->cw_size * cw, page);
+	if (ret)
+		return ret;
+
 	update_rw_regs(host, 1, true);
 	config_nand_page_read(nandc);
 
@@ -1943,7 +1965,10 @@ static int copy_last_cw(struct qcom_nand_host *host, int page)
 	/* prepare a clean read buffer */
 	memset(nandc->data_buffer, 0xff, size);
 
-	set_address(host, host->cw_size * (ecc->steps - 1), page);
+	ret = set_address(host, host->cw_size * (ecc->steps - 1), page);
+	if (ret)
+		return ret;
+
 	update_rw_regs(host, 1, true);
 
 	config_nand_single_cw_page_read(nandc, host->use_ecc);
@@ -2005,12 +2030,16 @@ static int qcom_nandc_read_oob(struct nand_chip *chip, int page)
 	struct qcom_nand_host *host = to_qcom_nand_host(chip);
 	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
 	struct nand_ecc_ctrl *ecc = &chip->ecc;
+	int ret;
 
 	clear_read_regs(nandc);
 	clear_bam_transaction(nandc);
 
 	host->use_ecc = true;
-	set_address(host, 0, page);
+	ret = set_address(host, 0, page);
+	if (ret)
+		return ret;
+
 	update_rw_regs(host, ecc->steps, true);
 
 	return read_page_ecc(host, NULL, chip->oob_poi, page);
@@ -2188,7 +2217,10 @@ static int qcom_nandc_write_oob(struct nand_chip *chip, int page)
 	mtd_ooblayout_get_databytes(mtd, nandc->data_buffer + data_size, oob,
 				    0, mtd->oobavail);
 
-	set_address(host, host->cw_size * (ecc->steps - 1), page);
+	ret = set_address(host, host->cw_size * (ecc->steps - 1), page);
+	if (ret)
+		return ret;
+
 	update_rw_regs(host, 1, false);
 
 	config_nand_page_write(nandc);
@@ -2267,7 +2299,10 @@ static int qcom_nandc_block_markbad(struct nand_chip *chip, loff_t ofs)
 
 	/* prepare write */
 	host->use_ecc = false;
-	set_address(host, host->cw_size * (ecc->steps - 1), page);
+	ret = set_address(host, host->cw_size * (ecc->steps - 1), page);
+	if (ret)
+		return ret;
+
 	update_rw_regs(host, 1, false);
 
 	config_nand_page_write(nandc);
@@ -2830,7 +2865,8 @@ static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc,
 	struct nand_chip *chip = &host->chip;
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	struct device *dev = nandc->dev;
-	int ret;
+	struct property *prop;
+	int ret, length, nr_elem;
 
 	ret = of_property_read_u32(dn, "reg", &host->cs);
 	if (ret) {
@@ -2872,6 +2908,24 @@ static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc,
 	/* set up initial status value */
 	host->status = NAND_STATUS_READY | NAND_STATUS_WP;
 
+	/*
+	 * Look for secure regions in the NAND chip. These regions are supposed
+	 * to be protected by a secure element like Trustzone. So the read/write
+	 * accesses to these regions will be blocked in the runtime by this
+	 * driver.
+	 */
+	prop = of_find_property(dn, "secure-regions", &length);
+	if (prop) {
+		nr_elem = length / sizeof(u32);
+		host->nr_sec_regions = nr_elem / 2;
+
+		host->sec_regions = devm_kcalloc(dev, nr_elem, sizeof(u32), GFP_KERNEL);
+		if (!host->sec_regions)
+			return -ENOMEM;
+
+		of_property_read_u32_array(dn, "secure-regions", host->sec_regions, nr_elem);
+	}
+
 	ret = nand_scan(chip, 1);
 	if (ret)
 		return ret;
-- 
2.25.1

[PATCH v4 3/3] mtd: rawnand: qcom: Add support for secure regions in NAND memory

[Manivannan Sadhasivam]

On a typical end product, a vendor may choose to secure some regions in
the NAND memory which are supposed to stay intact between FW upgrades.
The access to those regions will be blocked by a secure element like
Trustzone. So the normal world software like Linux kernel should not
touch these regions (including reading).

The regions are declared using a NAND chip DT property,
"secure-regions". So let's make use of this property and skip
access to the secure regions present in a system.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/mtd/nand/raw/qcom_nandc.c | 72 +++++++++++++++++++++++++++----
 1 file changed, 63 insertions(+), 9 deletions(-)

diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 87c23bb320bf..8027f7cb32be 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -431,6 +431,11 @@ struct qcom_nand_controller {
  * @cfg0, cfg1, cfg0_raw..:	NANDc register configurations needed for
  *				ecc/non-ecc mode for the current nand flash
  *				device
+ *
+ * @sec_regions:		Array representing the secure regions in the
+ *				NAND chip
+ *
+ * @nr_sec_regions:		Number of secure regions in the NAND chip
  */
 struct qcom_nand_host {
 	struct nand_chip chip;
@@ -453,6 +458,9 @@ struct qcom_nand_host {
 	u32 ecc_bch_cfg;
 	u32 clrflashstatus;
 	u32 clrreadstatus;
+
+	u32 *sec_regions;
+	u8 nr_sec_regions;
 };
 
 /*
@@ -662,16 +670,27 @@ static void nandc_set_reg(struct qcom_nand_controller *nandc, int offset,
 }
 
 /* helper to configure address register values */
-static void set_address(struct qcom_nand_host *host, u16 column, int page)
+static int set_address(struct qcom_nand_host *host, u16 column, int page)
 {
 	struct nand_chip *chip = &host->chip;
 	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+	u32 offs = page << chip->page_shift;
+	int i, j;
+
+	/* Skip touching the secure regions if present */
+	for (i = 0, j = 0; i < host->nr_sec_regions; i++, j += 2) {
+		if (offs >= host->sec_regions[j] &&
+		    (offs <= host->sec_regions[j] + host->sec_regions[j + 1]))
+			return -EIO;
+	}
 
 	if (chip->options & NAND_BUSWIDTH_16)
 		column >>= 1;
 
 	nandc_set_reg(nandc, NAND_ADDR0, page << 16 | column);
 	nandc_set_reg(nandc, NAND_ADDR1, page >> 16 & 0xff);
+
+	return 0;
 }
 
 /*
@@ -1491,13 +1510,13 @@ static void qcom_nandc_command(struct nand_chip *chip, unsigned int command,
 		WARN_ON(column != 0);
 
 		host->use_ecc = true;
-		set_address(host, 0, page_addr);
+		ret = set_address(host, 0, page_addr);
 		update_rw_regs(host, ecc->steps, true);
 		break;
 
 	case NAND_CMD_SEQIN:
 		WARN_ON(column != 0);
-		set_address(host, 0, page_addr);
+		ret = set_address(host, 0, page_addr);
 		break;
 
 	case NAND_CMD_PAGEPROG:
@@ -1615,7 +1634,10 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
 	host->use_ecc = false;
 
 	clear_bam_transaction(nandc);
-	set_address(host, host->cw_size * cw, page);
+	ret = set_address(host, host->cw_size * cw, page);
+	if (ret)
+		return ret;
+
 	update_rw_regs(host, 1, true);
 	config_nand_page_read(nandc);
 
@@ -1943,7 +1965,10 @@ static int copy_last_cw(struct qcom_nand_host *host, int page)
 	/* prepare a clean read buffer */
 	memset(nandc->data_buffer, 0xff, size);
 
-	set_address(host, host->cw_size * (ecc->steps - 1), page);
+	ret = set_address(host, host->cw_size * (ecc->steps - 1), page);
+	if (ret)
+		return ret;
+
 	update_rw_regs(host, 1, true);
 
 	config_nand_single_cw_page_read(nandc, host->use_ecc);
@@ -2005,12 +2030,16 @@ static int qcom_nandc_read_oob(struct nand_chip *chip, int page)
 	struct qcom_nand_host *host = to_qcom_nand_host(chip);
 	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
 	struct nand_ecc_ctrl *ecc = &chip->ecc;
+	int ret;
 
 	clear_read_regs(nandc);
 	clear_bam_transaction(nandc);
 
 	host->use_ecc = true;
-	set_address(host, 0, page);
+	ret = set_address(host, 0, page);
+	if (ret)
+		return ret;
+
 	update_rw_regs(host, ecc->steps, true);
 
 	return read_page_ecc(host, NULL, chip->oob_poi, page);
@@ -2188,7 +2217,10 @@ static int qcom_nandc_write_oob(struct nand_chip *chip, int page)
 	mtd_ooblayout_get_databytes(mtd, nandc->data_buffer + data_size, oob,
 				    0, mtd->oobavail);
 
-	set_address(host, host->cw_size * (ecc->steps - 1), page);
+	ret = set_address(host, host->cw_size * (ecc->steps - 1), page);
+	if (ret)
+		return ret;
+
 	update_rw_regs(host, 1, false);
 
 	config_nand_page_write(nandc);
@@ -2267,7 +2299,10 @@ static int qcom_nandc_block_markbad(struct nand_chip *chip, loff_t ofs)
 
 	/* prepare write */
 	host->use_ecc = false;
-	set_address(host, host->cw_size * (ecc->steps - 1), page);
+	ret = set_address(host, host->cw_size * (ecc->steps - 1), page);
+	if (ret)
+		return ret;
+
 	update_rw_regs(host, 1, false);
 
 	config_nand_page_write(nandc);
@@ -2830,7 +2865,8 @@ static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc,
 	struct nand_chip *chip = &host->chip;
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	struct device *dev = nandc->dev;
-	int ret;
+	struct property *prop;
+	int ret, length, nr_elem;
 
 	ret = of_property_read_u32(dn, "reg", &host->cs);
 	if (ret) {
@@ -2872,6 +2908,24 @@ static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc,
 	/* set up initial status value */
 	host->status = NAND_STATUS_READY | NAND_STATUS_WP;
 
+	/*
+	 * Look for secure regions in the NAND chip. These regions are supposed
+	 * to be protected by a secure element like Trustzone. So the read/write
+	 * accesses to these regions will be blocked in the runtime by this
+	 * driver.
+	 */
+	prop = of_find_property(dn, "secure-regions", &length);
+	if (prop) {
+		nr_elem = length / sizeof(u32);
+		host->nr_sec_regions = nr_elem / 2;
+
+		host->sec_regions = devm_kcalloc(dev, nr_elem, sizeof(u32), GFP_KERNEL);
+		if (!host->sec_regions)
+			return -ENOMEM;
+
+		of_property_read_u32_array(dn, "secure-regions", host->sec_regions, nr_elem);
+	}
+
 	ret = nand_scan(chip, 1);
 	if (ret)
 		return ret;
-- 
2.25.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v4 3/3] mtd: rawnand: qcom: Add support for secure regions in NAND memory

[Boris Brezillon]

On Mon,  8 Mar 2021 11:14:47 +0530
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> wrote:

> On a typical end product, a vendor may choose to secure some regions in
> the NAND memory which are supposed to stay intact between FW upgrades.
> The access to those regions will be blocked by a secure element like
> Trustzone. So the normal world software like Linux kernel should not
> touch these regions (including reading).
> 
> The regions are declared using a NAND chip DT property,
> "secure-regions". So let's make use of this property and skip
> access to the secure regions present in a system.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>  drivers/mtd/nand/raw/qcom_nandc.c | 72 +++++++++++++++++++++++++++----
>  1 file changed, 63 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
> index 87c23bb320bf..8027f7cb32be 100644
> --- a/drivers/mtd/nand/raw/qcom_nandc.c
> +++ b/drivers/mtd/nand/raw/qcom_nandc.c
> @@ -431,6 +431,11 @@ struct qcom_nand_controller {
>   * @cfg0, cfg1, cfg0_raw..:	NANDc register configurations needed for
>   *				ecc/non-ecc mode for the current nand flash
>   *				device
> + *
> + * @sec_regions:		Array representing the secure regions in the
> + *				NAND chip
> + *
> + * @nr_sec_regions:		Number of secure regions in the NAND chip
>   */
>  struct qcom_nand_host {
>  	struct nand_chip chip;
> @@ -453,6 +458,9 @@ struct qcom_nand_host {
>  	u32 ecc_bch_cfg;
>  	u32 clrflashstatus;
>  	u32 clrreadstatus;
> +
> +	u32 *sec_regions;
> +	u8 nr_sec_regions;
>  };
>  
>  /*
> @@ -662,16 +670,27 @@ static void nandc_set_reg(struct qcom_nand_controller *nandc, int offset,
>  }
>  
>  /* helper to configure address register values */
> -static void set_address(struct qcom_nand_host *host, u16 column, int page)
> +static int set_address(struct qcom_nand_host *host, u16 column, int page)
>  {
>  	struct nand_chip *chip = &host->chip;
>  	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
> +	u32 offs = page << chip->page_shift;
> +	int i, j;
> +
> +	/* Skip touching the secure regions if present */
> +	for (i = 0, j = 0; i < host->nr_sec_regions; i++, j += 2) {
> +		if (offs >= host->sec_regions[j] &&
> +		    (offs <= host->sec_regions[j] + host->sec_regions[j + 1]))
> +			return -EIO;
> +	}

Hm, not sure that's a good idea to make this check part of
set_address(). Looks like set_address() can be used for ONFI page
access too, and you definitely don't want to block those
requests. I'd recommend having a separate helper that you can call from
qcom_nandc_{read,write}_{oob,page,page_raw}().

>  
>  	if (chip->options & NAND_BUSWIDTH_16)
>  		column >>= 1;
>  
>  	nandc_set_reg(nandc, NAND_ADDR0, page << 16 | column);
>  	nandc_set_reg(nandc, NAND_ADDR1, page >> 16 & 0xff);
> +
> +	return 0;
>  }
>  
>  /*
> @@ -1491,13 +1510,13 @@ static void qcom_nandc_command(struct nand_chip *chip, unsigned int command,
>  		WARN_ON(column != 0);
>  
>  		host->use_ecc = true;
> -		set_address(host, 0, page_addr);
> +		ret = set_address(host, 0, page_addr);
>  		update_rw_regs(host, ecc->steps, true);
>  		break;
>  
>  	case NAND_CMD_SEQIN:
>  		WARN_ON(column != 0);
> -		set_address(host, 0, page_addr);
> +		ret = set_address(host, 0, page_addr);
>  		break;
>  
>  	case NAND_CMD_PAGEPROG:
> @@ -1615,7 +1634,10 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
>  	host->use_ecc = false;
>  
>  	clear_bam_transaction(nandc);
> -	set_address(host, host->cw_size * cw, page);
> +	ret = set_address(host, host->cw_size * cw, page);
> +	if (ret)
> +		return ret;
> +
>  	update_rw_regs(host, 1, true);
>  	config_nand_page_read(nandc);
>  
> @@ -1943,7 +1965,10 @@ static int copy_last_cw(struct qcom_nand_host *host, int page)
>  	/* prepare a clean read buffer */
>  	memset(nandc->data_buffer, 0xff, size);
>  
> -	set_address(host, host->cw_size * (ecc->steps - 1), page);
> +	ret = set_address(host, host->cw_size * (ecc->steps - 1), page);
> +	if (ret)
> +		return ret;
> +
>  	update_rw_regs(host, 1, true);
>  
>  	config_nand_single_cw_page_read(nandc, host->use_ecc);
> @@ -2005,12 +2030,16 @@ static int qcom_nandc_read_oob(struct nand_chip *chip, int page)
>  	struct qcom_nand_host *host = to_qcom_nand_host(chip);
>  	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
>  	struct nand_ecc_ctrl *ecc = &chip->ecc;
> +	int ret;
>  
>  	clear_read_regs(nandc);
>  	clear_bam_transaction(nandc);
>  
>  	host->use_ecc = true;
> -	set_address(host, 0, page);
> +	ret = set_address(host, 0, page);
> +	if (ret)
> +		return ret;
> +
>  	update_rw_regs(host, ecc->steps, true);
>  
>  	return read_page_ecc(host, NULL, chip->oob_poi, page);
> @@ -2188,7 +2217,10 @@ static int qcom_nandc_write_oob(struct nand_chip *chip, int page)
>  	mtd_ooblayout_get_databytes(mtd, nandc->data_buffer + data_size, oob,
>  				    0, mtd->oobavail);
>  
> -	set_address(host, host->cw_size * (ecc->steps - 1), page);
> +	ret = set_address(host, host->cw_size * (ecc->steps - 1), page);
> +	if (ret)
> +		return ret;
> +
>  	update_rw_regs(host, 1, false);
>  
>  	config_nand_page_write(nandc);
> @@ -2267,7 +2299,10 @@ static int qcom_nandc_block_markbad(struct nand_chip *chip, loff_t ofs)
>  
>  	/* prepare write */
>  	host->use_ecc = false;
> -	set_address(host, host->cw_size * (ecc->steps - 1), page);
> +	ret = set_address(host, host->cw_size * (ecc->steps - 1), page);
> +	if (ret)
> +		return ret;
> +
>  	update_rw_regs(host, 1, false);
>  
>  	config_nand_page_write(nandc);
> @@ -2830,7 +2865,8 @@ static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc,
>  	struct nand_chip *chip = &host->chip;
>  	struct mtd_info *mtd = nand_to_mtd(chip);
>  	struct device *dev = nandc->dev;
> -	int ret;
> +	struct property *prop;
> +	int ret, length, nr_elem;
>  
>  	ret = of_property_read_u32(dn, "reg", &host->cs);
>  	if (ret) {
> @@ -2872,6 +2908,24 @@ static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc,
>  	/* set up initial status value */
>  	host->status = NAND_STATUS_READY | NAND_STATUS_WP;
>  
> +	/*
> +	 * Look for secure regions in the NAND chip. These regions are supposed
> +	 * to be protected by a secure element like Trustzone. So the read/write
> +	 * accesses to these regions will be blocked in the runtime by this
> +	 * driver.
> +	 */
> +	prop = of_find_property(dn, "secure-regions", &length);
> +	if (prop) {
> +		nr_elem = length / sizeof(u32);
> +		host->nr_sec_regions = nr_elem / 2;
> +
> +		host->sec_regions = devm_kcalloc(dev, nr_elem, sizeof(u32), GFP_KERNEL);
> +		if (!host->sec_regions)
> +			return -ENOMEM;
> +
> +		of_property_read_u32_array(dn, "secure-regions", host->sec_regions, nr_elem);
> +	}
> +
>  	ret = nand_scan(chip, 1);
>  	if (ret)
>  		return ret;

Re: [PATCH v4 3/3] mtd: rawnand: qcom: Add support for secure regions in NAND memory

[Boris Brezillon]

On Mon,  8 Mar 2021 11:14:47 +0530
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> wrote:

> On a typical end product, a vendor may choose to secure some regions in
> the NAND memory which are supposed to stay intact between FW upgrades.
> The access to those regions will be blocked by a secure element like
> Trustzone. So the normal world software like Linux kernel should not
> touch these regions (including reading).
> 
> The regions are declared using a NAND chip DT property,
> "secure-regions". So let's make use of this property and skip
> access to the secure regions present in a system.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>  drivers/mtd/nand/raw/qcom_nandc.c | 72 +++++++++++++++++++++++++++----
>  1 file changed, 63 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
> index 87c23bb320bf..8027f7cb32be 100644
> --- a/drivers/mtd/nand/raw/qcom_nandc.c
> +++ b/drivers/mtd/nand/raw/qcom_nandc.c
> @@ -431,6 +431,11 @@ struct qcom_nand_controller {
>   * @cfg0, cfg1, cfg0_raw..:	NANDc register configurations needed for
>   *				ecc/non-ecc mode for the current nand flash
>   *				device
> + *
> + * @sec_regions:		Array representing the secure regions in the
> + *				NAND chip
> + *
> + * @nr_sec_regions:		Number of secure regions in the NAND chip
>   */
>  struct qcom_nand_host {
>  	struct nand_chip chip;
> @@ -453,6 +458,9 @@ struct qcom_nand_host {
>  	u32 ecc_bch_cfg;
>  	u32 clrflashstatus;
>  	u32 clrreadstatus;
> +
> +	u32 *sec_regions;
> +	u8 nr_sec_regions;
>  };
>  
>  /*
> @@ -662,16 +670,27 @@ static void nandc_set_reg(struct qcom_nand_controller *nandc, int offset,
>  }
>  
>  /* helper to configure address register values */
> -static void set_address(struct qcom_nand_host *host, u16 column, int page)
> +static int set_address(struct qcom_nand_host *host, u16 column, int page)
>  {
>  	struct nand_chip *chip = &host->chip;
>  	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
> +	u32 offs = page << chip->page_shift;
> +	int i, j;
> +
> +	/* Skip touching the secure regions if present */
> +	for (i = 0, j = 0; i < host->nr_sec_regions; i++, j += 2) {
> +		if (offs >= host->sec_regions[j] &&
> +		    (offs <= host->sec_regions[j] + host->sec_regions[j + 1]))
> +			return -EIO;
> +	}

Hm, not sure that's a good idea to make this check part of
set_address(). Looks like set_address() can be used for ONFI page
access too, and you definitely don't want to block those
requests. I'd recommend having a separate helper that you can call from
qcom_nandc_{read,write}_{oob,page,page_raw}().

>  
>  	if (chip->options & NAND_BUSWIDTH_16)
>  		column >>= 1;
>  
>  	nandc_set_reg(nandc, NAND_ADDR0, page << 16 | column);
>  	nandc_set_reg(nandc, NAND_ADDR1, page >> 16 & 0xff);
> +
> +	return 0;
>  }
>  
>  /*
> @@ -1491,13 +1510,13 @@ static void qcom_nandc_command(struct nand_chip *chip, unsigned int command,
>  		WARN_ON(column != 0);
>  
>  		host->use_ecc = true;
> -		set_address(host, 0, page_addr);
> +		ret = set_address(host, 0, page_addr);
>  		update_rw_regs(host, ecc->steps, true);
>  		break;
>  
>  	case NAND_CMD_SEQIN:
>  		WARN_ON(column != 0);
> -		set_address(host, 0, page_addr);
> +		ret = set_address(host, 0, page_addr);
>  		break;
>  
>  	case NAND_CMD_PAGEPROG:
> @@ -1615,7 +1634,10 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
>  	host->use_ecc = false;
>  
>  	clear_bam_transaction(nandc);
> -	set_address(host, host->cw_size * cw, page);
> +	ret = set_address(host, host->cw_size * cw, page);
> +	if (ret)
> +		return ret;
> +
>  	update_rw_regs(host, 1, true);
>  	config_nand_page_read(nandc);
>  
> @@ -1943,7 +1965,10 @@ static int copy_last_cw(struct qcom_nand_host *host, int page)
>  	/* prepare a clean read buffer */
>  	memset(nandc->data_buffer, 0xff, size);
>  
> -	set_address(host, host->cw_size * (ecc->steps - 1), page);
> +	ret = set_address(host, host->cw_size * (ecc->steps - 1), page);
> +	if (ret)
> +		return ret;
> +
>  	update_rw_regs(host, 1, true);
>  
>  	config_nand_single_cw_page_read(nandc, host->use_ecc);
> @@ -2005,12 +2030,16 @@ static int qcom_nandc_read_oob(struct nand_chip *chip, int page)
>  	struct qcom_nand_host *host = to_qcom_nand_host(chip);
>  	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
>  	struct nand_ecc_ctrl *ecc = &chip->ecc;
> +	int ret;
>  
>  	clear_read_regs(nandc);
>  	clear_bam_transaction(nandc);
>  
>  	host->use_ecc = true;
> -	set_address(host, 0, page);
> +	ret = set_address(host, 0, page);
> +	if (ret)
> +		return ret;
> +
>  	update_rw_regs(host, ecc->steps, true);
>  
>  	return read_page_ecc(host, NULL, chip->oob_poi, page);
> @@ -2188,7 +2217,10 @@ static int qcom_nandc_write_oob(struct nand_chip *chip, int page)
>  	mtd_ooblayout_get_databytes(mtd, nandc->data_buffer + data_size, oob,
>  				    0, mtd->oobavail);
>  
> -	set_address(host, host->cw_size * (ecc->steps - 1), page);
> +	ret = set_address(host, host->cw_size * (ecc->steps - 1), page);
> +	if (ret)
> +		return ret;
> +
>  	update_rw_regs(host, 1, false);
>  
>  	config_nand_page_write(nandc);
> @@ -2267,7 +2299,10 @@ static int qcom_nandc_block_markbad(struct nand_chip *chip, loff_t ofs)
>  
>  	/* prepare write */
>  	host->use_ecc = false;
> -	set_address(host, host->cw_size * (ecc->steps - 1), page);
> +	ret = set_address(host, host->cw_size * (ecc->steps - 1), page);
> +	if (ret)
> +		return ret;
> +
>  	update_rw_regs(host, 1, false);
>  
>  	config_nand_page_write(nandc);
> @@ -2830,7 +2865,8 @@ static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc,
>  	struct nand_chip *chip = &host->chip;
>  	struct mtd_info *mtd = nand_to_mtd(chip);
>  	struct device *dev = nandc->dev;
> -	int ret;
> +	struct property *prop;
> +	int ret, length, nr_elem;
>  
>  	ret = of_property_read_u32(dn, "reg", &host->cs);
>  	if (ret) {
> @@ -2872,6 +2908,24 @@ static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc,
>  	/* set up initial status value */
>  	host->status = NAND_STATUS_READY | NAND_STATUS_WP;
>  
> +	/*
> +	 * Look for secure regions in the NAND chip. These regions are supposed
> +	 * to be protected by a secure element like Trustzone. So the read/write
> +	 * accesses to these regions will be blocked in the runtime by this
> +	 * driver.
> +	 */
> +	prop = of_find_property(dn, "secure-regions", &length);
> +	if (prop) {
> +		nr_elem = length / sizeof(u32);
> +		host->nr_sec_regions = nr_elem / 2;
> +
> +		host->sec_regions = devm_kcalloc(dev, nr_elem, sizeof(u32), GFP_KERNEL);
> +		if (!host->sec_regions)
> +			return -ENOMEM;
> +
> +		of_property_read_u32_array(dn, "secure-regions", host->sec_regions, nr_elem);
> +	}
> +
>  	ret = nand_scan(chip, 1);
>  	if (ret)
>  		return ret;


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v4 3/3] mtd: rawnand: qcom: Add support for secure regions in NAND memory

[Manivannan Sadhasivam]

On Mon, Mar 08, 2021 at 10:02:47AM +0100, Boris Brezillon wrote:
> On Mon,  8 Mar 2021 11:14:47 +0530
> Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> wrote:
> 

[...]

> >  /* helper to configure address register values */
> > -static void set_address(struct qcom_nand_host *host, u16 column, int page)
> > +static int set_address(struct qcom_nand_host *host, u16 column, int page)
> >  {
> >  	struct nand_chip *chip = &host->chip;
> >  	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
> > +	u32 offs = page << chip->page_shift;
> > +	int i, j;
> > +
> > +	/* Skip touching the secure regions if present */
> > +	for (i = 0, j = 0; i < host->nr_sec_regions; i++, j += 2) {
> > +		if (offs >= host->sec_regions[j] &&
> > +		    (offs <= host->sec_regions[j] + host->sec_regions[j + 1]))
> > +			return -EIO;
> > +	}
> 
> Hm, not sure that's a good idea to make this check part of
> set_address(). Looks like set_address() can be used for ONFI page
> access too, and you definitely don't want to block those
> requests. I'd recommend having a separate helper that you can call from
> qcom_nandc_{read,write}_{oob,page,page_raw}().
> 

Right but I went for the code simplicity :/ Anyway, since you're favoring
towards moving this check into code, I'll incorporate your suggestion
accordingly.

Thanks,
Mani

Re: [PATCH v4 3/3] mtd: rawnand: qcom: Add support for secure regions in NAND memory

[Manivannan Sadhasivam]

On Mon, Mar 08, 2021 at 10:02:47AM +0100, Boris Brezillon wrote:
> On Mon,  8 Mar 2021 11:14:47 +0530
> Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> wrote:
> 

[...]

> >  /* helper to configure address register values */
> > -static void set_address(struct qcom_nand_host *host, u16 column, int page)
> > +static int set_address(struct qcom_nand_host *host, u16 column, int page)
> >  {
> >  	struct nand_chip *chip = &host->chip;
> >  	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
> > +	u32 offs = page << chip->page_shift;
> > +	int i, j;
> > +
> > +	/* Skip touching the secure regions if present */
> > +	for (i = 0, j = 0; i < host->nr_sec_regions; i++, j += 2) {
> > +		if (offs >= host->sec_regions[j] &&
> > +		    (offs <= host->sec_regions[j] + host->sec_regions[j + 1]))
> > +			return -EIO;
> > +	}
> 
> Hm, not sure that's a good idea to make this check part of
> set_address(). Looks like set_address() can be used for ONFI page
> access too, and you definitely don't want to block those
> requests. I'd recommend having a separate helper that you can call from
> qcom_nandc_{read,write}_{oob,page,page_raw}().
> 

Right but I went for the code simplicity :/ Anyway, since you're favoring
towards moving this check into code, I'll incorporate your suggestion
accordingly.

Thanks,
Mani

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v4 3/3] mtd: rawnand: qcom: Add support for secure regions in NAND memory

[Manivannan Sadhasivam]

On Mon, Mar 08, 2021 at 07:04:17PM +0530, Manivannan Sadhasivam wrote:
> On Mon, Mar 08, 2021 at 10:02:47AM +0100, Boris Brezillon wrote:
> > On Mon,  8 Mar 2021 11:14:47 +0530
> > Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> wrote:
> > 
> 
> [...]
> 
> > >  /* helper to configure address register values */
> > > -static void set_address(struct qcom_nand_host *host, u16 column, int page)
> > > +static int set_address(struct qcom_nand_host *host, u16 column, int page)
> > >  {
> > >  	struct nand_chip *chip = &host->chip;
> > >  	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
> > > +	u32 offs = page << chip->page_shift;
> > > +	int i, j;
> > > +
> > > +	/* Skip touching the secure regions if present */
> > > +	for (i = 0, j = 0; i < host->nr_sec_regions; i++, j += 2) {
> > > +		if (offs >= host->sec_regions[j] &&
> > > +		    (offs <= host->sec_regions[j] + host->sec_regions[j + 1]))
> > > +			return -EIO;
> > > +	}
> > 
> > Hm, not sure that's a good idea to make this check part of
> > set_address(). Looks like set_address() can be used for ONFI page
> > access too, and you definitely don't want to block those
> > requests. I'd recommend having a separate helper that you can call from
> > qcom_nandc_{read,write}_{oob,page,page_raw}().
> > 
> 
> Right but I went for the code simplicity :/ Anyway, since you're favoring
> towards moving this check into code, I'll incorporate your suggestion

s/code/core

> accordingly.
> 
> Thanks,
> Mani

Re: [PATCH v4 3/3] mtd: rawnand: qcom: Add support for secure regions in NAND memory

[Manivannan Sadhasivam]

On Mon, Mar 08, 2021 at 07:04:17PM +0530, Manivannan Sadhasivam wrote:
> On Mon, Mar 08, 2021 at 10:02:47AM +0100, Boris Brezillon wrote:
> > On Mon,  8 Mar 2021 11:14:47 +0530
> > Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> wrote:
> > 
> 
> [...]
> 
> > >  /* helper to configure address register values */
> > > -static void set_address(struct qcom_nand_host *host, u16 column, int page)
> > > +static int set_address(struct qcom_nand_host *host, u16 column, int page)
> > >  {
> > >  	struct nand_chip *chip = &host->chip;
> > >  	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
> > > +	u32 offs = page << chip->page_shift;
> > > +	int i, j;
> > > +
> > > +	/* Skip touching the secure regions if present */
> > > +	for (i = 0, j = 0; i < host->nr_sec_regions; i++, j += 2) {
> > > +		if (offs >= host->sec_regions[j] &&
> > > +		    (offs <= host->sec_regions[j] + host->sec_regions[j + 1]))
> > > +			return -EIO;
> > > +	}
> > 
> > Hm, not sure that's a good idea to make this check part of
> > set_address(). Looks like set_address() can be used for ONFI page
> > access too, and you definitely don't want to block those
> > requests. I'd recommend having a separate helper that you can call from
> > qcom_nandc_{read,write}_{oob,page,page_raw}().
> > 
> 
> Right but I went for the code simplicity :/ Anyway, since you're favoring
> towards moving this check into code, I'll incorporate your suggestion

s/code/core

> accordingly.
> 
> Thanks,
> Mani

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/