All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH] MIPS: Enable some missed configs in loongson3_defconfig to support bpftrace
@ 2021-03-08  6:48 Tiezhu Yang
  2021-03-10 15:09 ` Thomas Bogendoerfer
  0 siblings, 1 reply; 2+ messages in thread
From: Tiezhu Yang @ 2021-03-08  6:48 UTC (permalink / raw)
  To: Thomas Bogendoerfer; +Cc: linux-mips, linux-kernel, Xuefeng Li

bpftrace is a high-level tracing language for Linux enhanced Berkeley
Packet Filter (eBPF) available in recent Linux kernels (4.x). bpftrace
uses LLVM as a backend to compile scripts to BPF-bytecode and makes use
of BCC for interacting with the Linux BPF system, as well as existing
Linux tracing capabilities: kernel dynamic tracing (kprobes), user-level
dynamic tracing (uprobes), and tracepoints.

According to Linux Kernel Requirements in bpftrace/INSTALL.md [1], the
kernel needs to be built with the following options:

CONFIG_BPF=y
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_BPF_EVENTS=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_HAVE_KPROBES=y
CONFIG_KPROBES=y
CONFIG_KPROBE_EVENTS=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_UPROBES=y
CONFIG_UPROBE_EVENTS=y
CONFIG_DEBUG_FS=y

So enable some missed configs in loongson3_defconfig to make sure
the above configs are set after make loongson3_defconfig.

[1] https://github.com/iovisor/bpftrace/blob/master/INSTALL.md

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
---
 arch/mips/configs/loongson3_defconfig | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig
index 0e79f81..1b8f693 100644
--- a/arch/mips/configs/loongson3_defconfig
+++ b/arch/mips/configs/loongson3_defconfig
@@ -26,6 +26,7 @@ CONFIG_SCHED_AUTOGROUP=y
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_BPF_SYSCALL=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 CONFIG_MACH_LOONGSON64=y
@@ -40,6 +41,7 @@ CONFIG_MIPS32_N32=y
 CONFIG_VIRTUALIZATION=y
 CONFIG_KVM=m
 CONFIG_KVM_MIPS_VZ=y
+CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
@@ -129,6 +131,7 @@ CONFIG_L2TP=m
 CONFIG_BRIDGE=m
 CONFIG_VSOCKETS=m
 CONFIG_VIRTIO_VSOCKETS=m
+CONFIG_BPF_JIT=y
 CONFIG_CFG80211=m
 CONFIG_CFG80211_WEXT=y
 CONFIG_MAC80211=m
@@ -405,8 +408,10 @@ CONFIG_CRYPTO_DEFLATE=m
 CONFIG_PRINTK_TIME=y
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_FTRACE is not set
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FTRACE_SYSCALLS=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="ieee754=relaxed"
-- 
2.1.0


^ permalink raw reply related	[flat|nested] 2+ messages in thread

* Re: [PATCH] MIPS: Enable some missed configs in loongson3_defconfig to support bpftrace
  2021-03-08  6:48 [PATCH] MIPS: Enable some missed configs in loongson3_defconfig to support bpftrace Tiezhu Yang
@ 2021-03-10 15:09 ` Thomas Bogendoerfer
  0 siblings, 0 replies; 2+ messages in thread
From: Thomas Bogendoerfer @ 2021-03-10 15:09 UTC (permalink / raw)
  To: Tiezhu Yang; +Cc: linux-mips, linux-kernel, Xuefeng Li

On Mon, Mar 08, 2021 at 02:48:18PM +0800, Tiezhu Yang wrote:
> bpftrace is a high-level tracing language for Linux enhanced Berkeley
> Packet Filter (eBPF) available in recent Linux kernels (4.x). bpftrace
> uses LLVM as a backend to compile scripts to BPF-bytecode and makes use
> of BCC for interacting with the Linux BPF system, as well as existing
> Linux tracing capabilities: kernel dynamic tracing (kprobes), user-level
> dynamic tracing (uprobes), and tracepoints.
> 
> According to Linux Kernel Requirements in bpftrace/INSTALL.md [1], the
> kernel needs to be built with the following options:
> 
> CONFIG_BPF=y
> CONFIG_BPF_SYSCALL=y
> CONFIG_BPF_JIT=y
> CONFIG_HAVE_EBPF_JIT=y
> CONFIG_BPF_EVENTS=y
> CONFIG_FTRACE_SYSCALLS=y
> CONFIG_FUNCTION_TRACER=y
> CONFIG_HAVE_DYNAMIC_FTRACE=y
> CONFIG_DYNAMIC_FTRACE=y
> CONFIG_HAVE_KPROBES=y
> CONFIG_KPROBES=y
> CONFIG_KPROBE_EVENTS=y
> CONFIG_ARCH_SUPPORTS_UPROBES=y
> CONFIG_UPROBES=y
> CONFIG_UPROBE_EVENTS=y
> CONFIG_DEBUG_FS=y
> 
> So enable some missed configs in loongson3_defconfig to make sure
> the above configs are set after make loongson3_defconfig.
> 
> [1] https://github.com/iovisor/bpftrace/blob/master/INSTALL.md
> 
> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
> ---
>  arch/mips/configs/loongson3_defconfig | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)

applied to mips-next.

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2021-03-10 15:19 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-08  6:48 [PATCH] MIPS: Enable some missed configs in loongson3_defconfig to support bpftrace Tiezhu Yang
2021-03-10 15:09 ` Thomas Bogendoerfer

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.