All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH] arm64: dts: broadcom: bcm4908: fix Netgear R8000P LEDs nodes
@ 2021-03-10  7:32 ` Rafał Miłecki
  0 siblings, 0 replies; 4+ messages in thread
From: Rafał Miłecki @ 2021-03-10  7:32 UTC (permalink / raw)
  To: Florian Fainelli
  Cc: Rob Herring, linux-arm-kernel, devicetree,
	bcm-kernel-feedback-list, Rafał Miłecki

From: Rafał Miłecki <rafal@milecki.pl>

Update nodes names to match leds-gpio.yaml requirements.

Fixes: 29b08ead247a ("arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P LEDs")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 .../bcm4908/bcm4906-netgear-r8000p.dts         | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
index 7b24ad365a3c..41e8fbf095c6 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
@@ -18,55 +18,55 @@ memory@0 {
 	leds {
 		compatible = "gpio-leds";
 
-		power-white {
+		led-power-white {
 			function = LED_FUNCTION_POWER;
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
 		};
 
-		power-amber {
+		led-power-amber {
 			function = LED_FUNCTION_POWER;
 			color = <LED_COLOR_ID_AMBER>;
 			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		led-wps {
 			function = LED_FUNCTION_WPS;
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
 		};
 
-		2ghz {
+		led-2ghz {
 			function = "2ghz";
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz-1 {
+		led-5ghz-1 {
 			function = "5ghz-1";
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz-2 {
+		led-5ghz-2 {
 			function = "5ghz-2";
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			function = "usb2";
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
 		};
 
-		usb3 {
+		led-usb3 {
 			function = "usb3";
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
 		};
 
-		wifi {
+		led-wifi {
 			function = "wifi";
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 56 GPIO_ACTIVE_LOW>;
-- 
2.26.2


^ permalink raw reply related	[flat|nested] 4+ messages in thread
* [PATCH] arm64: dts: broadcom: bcm4908: fix Netgear R8000P LEDs nodes
@ 2021-03-10  7:32 ` Rafał Miłecki
  0 siblings, 0 replies; 4+ messages in thread
From: Rafał Miłecki @ 2021-03-10  7:32 UTC (permalink / raw)
  To: Florian Fainelli
  Cc: Rob Herring, linux-arm-kernel, devicetree,
	bcm-kernel-feedback-list, Rafał Miłecki

From: Rafał Miłecki <rafal@milecki.pl>

Update nodes names to match leds-gpio.yaml requirements.

Fixes: 29b08ead247a ("arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P LEDs")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 .../bcm4908/bcm4906-netgear-r8000p.dts         | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
index 7b24ad365a3c..41e8fbf095c6 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
@@ -18,55 +18,55 @@ memory@0 {
 	leds {
 		compatible = "gpio-leds";
 
-		power-white {
+		led-power-white {
 			function = LED_FUNCTION_POWER;
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
 		};
 
-		power-amber {
+		led-power-amber {
 			function = LED_FUNCTION_POWER;
 			color = <LED_COLOR_ID_AMBER>;
 			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		led-wps {
 			function = LED_FUNCTION_WPS;
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
 		};
 
-		2ghz {
+		led-2ghz {
 			function = "2ghz";
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz-1 {
+		led-5ghz-1 {
 			function = "5ghz-1";
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz-2 {
+		led-5ghz-2 {
 			function = "5ghz-2";
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			function = "usb2";
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
 		};
 
-		usb3 {
+		led-usb3 {
 			function = "usb3";
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
 		};
 
-		wifi {
+		led-wifi {
 			function = "wifi";
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 56 GPIO_ACTIVE_LOW>;
-- 
2.26.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 4+ messages in thread
* Re: [PATCH] arm64: dts: broadcom: bcm4908: fix Netgear R8000P LEDs nodes
  2021-03-10  7:32 ` Rafał Miłecki
@ 2021-03-10 19:09   ` Florian Fainelli
  -1 siblings, 0 replies; 4+ messages in thread
From: Florian Fainelli @ 2021-03-10 19:09 UTC (permalink / raw)
  To: bcm-kernel-feedback-list, Rafał Miłecki
  Cc: Rob Herring, linux-arm-kernel, devicetree, Rafał Miłecki

On Wed, 10 Mar 2021 08:32:03 +0100, Rafał Miłecki <zajec5@gmail.com> wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> Update nodes names to match leds-gpio.yaml requirements.
> 
> Fixes: 29b08ead247a ("arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P LEDs")
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---

Applied to devicetree-arm64/next, thanks!
--
Florian

^ permalink raw reply	[flat|nested] 4+ messages in thread
* Re: [PATCH] arm64: dts: broadcom: bcm4908: fix Netgear R8000P LEDs nodes
@ 2021-03-10 19:09   ` Florian Fainelli
  0 siblings, 0 replies; 4+ messages in thread
From: Florian Fainelli @ 2021-03-10 19:09 UTC (permalink / raw)
  To: bcm-kernel-feedback-list, Rafał Miłecki
  Cc: Rob Herring, linux-arm-kernel, devicetree, Rafał Miłecki

On Wed, 10 Mar 2021 08:32:03 +0100, Rafał Miłecki <zajec5@gmail.com> wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> Update nodes names to match leds-gpio.yaml requirements.
> 
> Fixes: 29b08ead247a ("arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P LEDs")
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---

Applied to devicetree-arm64/next, thanks!
--
Florian

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-03-10 19:11 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-10  7:32 [PATCH] arm64: dts: broadcom: bcm4908: fix Netgear R8000P LEDs nodes Rafał Miłecki
2021-03-10  7:32 ` Rafał Miłecki
2021-03-10 19:09 ` Florian Fainelli
2021-03-10 19:09   ` Florian Fainelli

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.