All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCHv2 0/4] Bx50v3 DT improvements
@ 2021-03-08 15:18 ` Sebastian Reichel
  0 siblings, 0 replies; 12+ messages in thread
From: Sebastian Reichel @ 2021-03-08 15:18 UTC (permalink / raw)
  To: Sebastian Reichel, Shawn Guo, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team
  Cc: Rob Herring, devicetree, linux-arm-kernel, linux-kernel, kernel

Bx50v3 DT improvements

These are a bunch of small unrelated improvements for the GE Bx50v3
device tree (and BA16 system on module, which is currently only used
by Bx50v3).

Changes since PATCHv1 [1]:
 * change patch prefix for BA16 patches
 * remove extra newline from PATCH 1/4
 * keep 'status' at the end of FEC in PATCH 2/4

[1] https://lore.kernel.org/lkml/20210223183346.138575-1-sebastian.reichel@collabora.com/

Thanks for reviewing/merging them,

-- Sebastian

Ian Ray (1):
  ARM: dts: imx: bx50v3: Define GPIO line names

Sebastian Reichel (3):
  ARM: dts: imx6q-ba16: add USB OTG VBUS enable GPIO
  ARM: dts: imx6q-ba16: improve PHY information
  ARM: dts: imx: bx50v3: i2c GPIOs are open drain

 arch/arm/boot/dts/imx6q-b450v3.dts  |  5 +++++
 arch/arm/boot/dts/imx6q-b650v3.dts  |  5 +++++
 arch/arm/boot/dts/imx6q-b850v3.dts  |  5 +++++
 arch/arm/boot/dts/imx6q-ba16.dtsi   | 21 +++++++++++++++++++++
 arch/arm/boot/dts/imx6q-bx50v3.dtsi | 12 ++++++------
 5 files changed, 42 insertions(+), 6 deletions(-)

-- 
2.30.1


^ permalink raw reply	[flat|nested] 12+ messages in thread
* [PATCHv2 0/4] Bx50v3 DT improvements
@ 2021-03-08 15:18 ` Sebastian Reichel
  0 siblings, 0 replies; 12+ messages in thread
From: Sebastian Reichel @ 2021-03-08 15:18 UTC (permalink / raw)
  To: Sebastian Reichel, Shawn Guo, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team
  Cc: Rob Herring, devicetree, linux-arm-kernel, linux-kernel, kernel

Bx50v3 DT improvements

These are a bunch of small unrelated improvements for the GE Bx50v3
device tree (and BA16 system on module, which is currently only used
by Bx50v3).

Changes since PATCHv1 [1]:
 * change patch prefix for BA16 patches
 * remove extra newline from PATCH 1/4
 * keep 'status' at the end of FEC in PATCH 2/4

[1] https://lore.kernel.org/lkml/20210223183346.138575-1-sebastian.reichel@collabora.com/

Thanks for reviewing/merging them,

-- Sebastian

Ian Ray (1):
  ARM: dts: imx: bx50v3: Define GPIO line names

Sebastian Reichel (3):
  ARM: dts: imx6q-ba16: add USB OTG VBUS enable GPIO
  ARM: dts: imx6q-ba16: improve PHY information
  ARM: dts: imx: bx50v3: i2c GPIOs are open drain

 arch/arm/boot/dts/imx6q-b450v3.dts  |  5 +++++
 arch/arm/boot/dts/imx6q-b650v3.dts  |  5 +++++
 arch/arm/boot/dts/imx6q-b850v3.dts  |  5 +++++
 arch/arm/boot/dts/imx6q-ba16.dtsi   | 21 +++++++++++++++++++++
 arch/arm/boot/dts/imx6q-bx50v3.dtsi | 12 ++++++------
 5 files changed, 42 insertions(+), 6 deletions(-)

-- 
2.30.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 12+ messages in thread
* [PATCHv2 1/4] ARM: dts: imx6q-ba16: add USB OTG VBUS enable GPIO
  2021-03-08 15:18 ` Sebastian Reichel
@ 2021-03-08 15:18   ` Sebastian Reichel
  -1 siblings, 0 replies; 12+ messages in thread
From: Sebastian Reichel @ 2021-03-08 15:18 UTC (permalink / raw)
  To: Sebastian Reichel, Shawn Guo, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team
  Cc: Rob Herring, devicetree, linux-arm-kernel, linux-kernel, kernel

Add VBUS regulator GPIO information, so that USB OTG port can
also be used in host mode.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 arch/arm/boot/dts/imx6q-ba16.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
index e4578ed3371e..826fd51b1d98 100644
--- a/arch/arm/boot/dts/imx6q-ba16.dtsi
+++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -124,6 +124,9 @@ reg_usb_otg_vbus: regulator-usbotgvbus {
 		regulator-name = "usb_otg_vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 };
 
@@ -575,6 +578,12 @@ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
 		>;
 	};
 
+	pinctrl_usbotg_vbus: usbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
+		>;
+	};
+
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD2_CMD__SD2_CMD	0x17059
-- 
2.30.1


^ permalink raw reply related	[flat|nested] 12+ messages in thread
* [PATCHv2 1/4] ARM: dts: imx6q-ba16: add USB OTG VBUS enable GPIO
@ 2021-03-08 15:18   ` Sebastian Reichel
  0 siblings, 0 replies; 12+ messages in thread
From: Sebastian Reichel @ 2021-03-08 15:18 UTC (permalink / raw)
  To: Sebastian Reichel, Shawn Guo, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team
  Cc: Rob Herring, devicetree, linux-arm-kernel, linux-kernel, kernel

Add VBUS regulator GPIO information, so that USB OTG port can
also be used in host mode.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 arch/arm/boot/dts/imx6q-ba16.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
index e4578ed3371e..826fd51b1d98 100644
--- a/arch/arm/boot/dts/imx6q-ba16.dtsi
+++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -124,6 +124,9 @@ reg_usb_otg_vbus: regulator-usbotgvbus {
 		regulator-name = "usb_otg_vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 };
 
@@ -575,6 +578,12 @@ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
 		>;
 	};
 
+	pinctrl_usbotg_vbus: usbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
+		>;
+	};
+
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD2_CMD__SD2_CMD	0x17059
-- 
2.30.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 12+ messages in thread
* [PATCHv2 2/4] ARM: dts: imx6q-ba16: improve PHY information
  2021-03-08 15:18 ` Sebastian Reichel
@ 2021-03-08 15:18   ` Sebastian Reichel
  -1 siblings, 0 replies; 12+ messages in thread
From: Sebastian Reichel @ 2021-03-08 15:18 UTC (permalink / raw)
  To: Sebastian Reichel, Shawn Guo, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team
  Cc: Rob Herring, devicetree, linux-arm-kernel, linux-kernel, kernel

Add PHY voltage supply information fixing the following kernel message:

2188000.ethernet supply phy not found, using dummy regulator

Also add PHY clock information to avoid depending on the bootloader
programming correct values.

The bootloader also sets some reserved registers in the PHY as
advised by Qualcomm, which is not supported by the bindings/kernel
driver, so the reset GPIO has not been added intentionally.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 arch/arm/boot/dts/imx6q-ba16.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
index 826fd51b1d98..6330d75f8f39 100644
--- a/arch/arm/boot/dts/imx6q-ba16.dtsi
+++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -175,7 +175,19 @@ &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
+	phy-supply = <&reg_3p3v>;
+	phy-handle = <&phy0>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@4 {
+			reg = <4>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
 };
 
 &hdmi {
-- 
2.30.1


^ permalink raw reply related	[flat|nested] 12+ messages in thread
* [PATCHv2 2/4] ARM: dts: imx6q-ba16: improve PHY information
@ 2021-03-08 15:18   ` Sebastian Reichel
  0 siblings, 0 replies; 12+ messages in thread
From: Sebastian Reichel @ 2021-03-08 15:18 UTC (permalink / raw)
  To: Sebastian Reichel, Shawn Guo, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team
  Cc: Rob Herring, devicetree, linux-arm-kernel, linux-kernel, kernel

Add PHY voltage supply information fixing the following kernel message:

2188000.ethernet supply phy not found, using dummy regulator

Also add PHY clock information to avoid depending on the bootloader
programming correct values.

The bootloader also sets some reserved registers in the PHY as
advised by Qualcomm, which is not supported by the bindings/kernel
driver, so the reset GPIO has not been added intentionally.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 arch/arm/boot/dts/imx6q-ba16.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
index 826fd51b1d98..6330d75f8f39 100644
--- a/arch/arm/boot/dts/imx6q-ba16.dtsi
+++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -175,7 +175,19 @@ &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
+	phy-supply = <&reg_3p3v>;
+	phy-handle = <&phy0>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@4 {
+			reg = <4>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
 };
 
 &hdmi {
-- 
2.30.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 12+ messages in thread
* [PATCHv2 3/4] ARM: dts: imx: bx50v3: i2c GPIOs are open drain
  2021-03-08 15:18 ` Sebastian Reichel
@ 2021-03-08 15:18   ` Sebastian Reichel
  -1 siblings, 0 replies; 12+ messages in thread
From: Sebastian Reichel @ 2021-03-08 15:18 UTC (permalink / raw)
  To: Sebastian Reichel, Shawn Guo, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team
  Cc: Rob Herring, devicetree, linux-arm-kernel, linux-kernel, kernel

Explicitly mark I2C GPIOs as open drain to fix the following
kernel message being printed:

enforced open drain please flag it properly in DT/ACPI DSDT/board file

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 arch/arm/boot/dts/imx6q-bx50v3.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
index 2a98cc657595..10922375c51e 100644
--- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -173,8 +173,8 @@ m25_eeprom: m25p80@0 {
 &i2c1 {
 	pinctrl-names = "default", "gpio";
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	sda-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	pca9547: mux@70 {
 		compatible = "nxp,pca9547";
@@ -315,15 +315,15 @@ mux1_i2c8: i2c@7 {
 &i2c2 {
 	pinctrl-names = "default", "gpio";
 	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 };
 
 &i2c3 {
 	pinctrl-names = "default", "gpio";
 	pinctrl-1 = <&pinctrl_i2c3_gpio>;
-	sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 };
 
 &iomuxc {
-- 
2.30.1


^ permalink raw reply related	[flat|nested] 12+ messages in thread
* [PATCHv2 3/4] ARM: dts: imx: bx50v3: i2c GPIOs are open drain
@ 2021-03-08 15:18   ` Sebastian Reichel
  0 siblings, 0 replies; 12+ messages in thread
From: Sebastian Reichel @ 2021-03-08 15:18 UTC (permalink / raw)
  To: Sebastian Reichel, Shawn Guo, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team
  Cc: Rob Herring, devicetree, linux-arm-kernel, linux-kernel, kernel

Explicitly mark I2C GPIOs as open drain to fix the following
kernel message being printed:

enforced open drain please flag it properly in DT/ACPI DSDT/board file

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 arch/arm/boot/dts/imx6q-bx50v3.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
index 2a98cc657595..10922375c51e 100644
--- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -173,8 +173,8 @@ m25_eeprom: m25p80@0 {
 &i2c1 {
 	pinctrl-names = "default", "gpio";
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	sda-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	pca9547: mux@70 {
 		compatible = "nxp,pca9547";
@@ -315,15 +315,15 @@ mux1_i2c8: i2c@7 {
 &i2c2 {
 	pinctrl-names = "default", "gpio";
 	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 };
 
 &i2c3 {
 	pinctrl-names = "default", "gpio";
 	pinctrl-1 = <&pinctrl_i2c3_gpio>;
-	sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 };
 
 &iomuxc {
-- 
2.30.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 12+ messages in thread
* [PATCHv2 4/4] ARM: dts: imx: bx50v3: Define GPIO line names
  2021-03-08 15:18 ` Sebastian Reichel
@ 2021-03-08 15:18   ` Sebastian Reichel
  -1 siblings, 0 replies; 12+ messages in thread
From: Sebastian Reichel @ 2021-03-08 15:18 UTC (permalink / raw)
  To: Sebastian Reichel, Shawn Guo, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team
  Cc: Rob Herring, devicetree, linux-arm-kernel, linux-kernel, kernel, Ian Ray

From: Ian Ray <ian.ray@ge.com>

Define GPIO line names for b450v3, b650v3, and b850v3.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 arch/arm/boot/dts/imx6q-b450v3.dts | 5 +++++
 arch/arm/boot/dts/imx6q-b650v3.dts | 5 +++++
 arch/arm/boot/dts/imx6q-b850v3.dts | 5 +++++
 3 files changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts
index 604f2420370f..d994b32ad825 100644
--- a/arch/arm/boot/dts/imx6q-b450v3.dts
+++ b/arch/arm/boot/dts/imx6q-b450v3.dts
@@ -84,6 +84,11 @@ lvds0_out: endpoint {
 };
 
 &pca9539 {
+	gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN",
+			  "", "SM_D_ACT", "DP1_RST#", "",
+			  "WD15S_EN", "WD15S_DIS#", "", "",
+			  "", "", "", "";
+
 	P04-hog {
 		gpio-hog;
 		gpios = <4 0>;
diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts
index 56d2aeb1900c..fa1a1df37cde 100644
--- a/arch/arm/boot/dts/imx6q-b650v3.dts
+++ b/arch/arm/boot/dts/imx6q-b650v3.dts
@@ -84,6 +84,11 @@ lvds0_out: endpoint {
 };
 
 &pca9539 {
+	gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN",
+			  "", "SM_D_ACT", "DP1_RST#", "",
+			  "WD15S_EN", "WD15S_DIS#", "", "",
+			  "", "", "", "";
+
 	P07-hog {
 		gpio-hog;
 		gpios = <7 0>;
diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
index 3d6b757bf325..db8c332df6a1 100644
--- a/arch/arm/boot/dts/imx6q-b850v3.dts
+++ b/arch/arm/boot/dts/imx6q-b850v3.dts
@@ -199,6 +199,11 @@ stdp4028_out: endpoint {
 };
 
 &pca9539 {
+	gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN",
+			  "REMOTE_ON_PML#", "SM_D_ACT", "DP1_RST#", "DP2_RST#",
+			  "", "", "", "",
+			  "", "", "", "";
+
 	P10-hog {
 		gpio-hog;
 		gpios = <8 0>;
-- 
2.30.1


^ permalink raw reply related	[flat|nested] 12+ messages in thread
* [PATCHv2 4/4] ARM: dts: imx: bx50v3: Define GPIO line names
@ 2021-03-08 15:18   ` Sebastian Reichel
  0 siblings, 0 replies; 12+ messages in thread
From: Sebastian Reichel @ 2021-03-08 15:18 UTC (permalink / raw)
  To: Sebastian Reichel, Shawn Guo, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team
  Cc: Rob Herring, devicetree, linux-arm-kernel, linux-kernel, kernel, Ian Ray

From: Ian Ray <ian.ray@ge.com>

Define GPIO line names for b450v3, b650v3, and b850v3.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 arch/arm/boot/dts/imx6q-b450v3.dts | 5 +++++
 arch/arm/boot/dts/imx6q-b650v3.dts | 5 +++++
 arch/arm/boot/dts/imx6q-b850v3.dts | 5 +++++
 3 files changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts
index 604f2420370f..d994b32ad825 100644
--- a/arch/arm/boot/dts/imx6q-b450v3.dts
+++ b/arch/arm/boot/dts/imx6q-b450v3.dts
@@ -84,6 +84,11 @@ lvds0_out: endpoint {
 };
 
 &pca9539 {
+	gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN",
+			  "", "SM_D_ACT", "DP1_RST#", "",
+			  "WD15S_EN", "WD15S_DIS#", "", "",
+			  "", "", "", "";
+
 	P04-hog {
 		gpio-hog;
 		gpios = <4 0>;
diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts
index 56d2aeb1900c..fa1a1df37cde 100644
--- a/arch/arm/boot/dts/imx6q-b650v3.dts
+++ b/arch/arm/boot/dts/imx6q-b650v3.dts
@@ -84,6 +84,11 @@ lvds0_out: endpoint {
 };
 
 &pca9539 {
+	gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN",
+			  "", "SM_D_ACT", "DP1_RST#", "",
+			  "WD15S_EN", "WD15S_DIS#", "", "",
+			  "", "", "", "";
+
 	P07-hog {
 		gpio-hog;
 		gpios = <7 0>;
diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
index 3d6b757bf325..db8c332df6a1 100644
--- a/arch/arm/boot/dts/imx6q-b850v3.dts
+++ b/arch/arm/boot/dts/imx6q-b850v3.dts
@@ -199,6 +199,11 @@ stdp4028_out: endpoint {
 };
 
 &pca9539 {
+	gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN",
+			  "REMOTE_ON_PML#", "SM_D_ACT", "DP1_RST#", "DP2_RST#",
+			  "", "", "", "",
+			  "", "", "", "";
+
 	P10-hog {
 		gpio-hog;
 		gpios = <8 0>;
-- 
2.30.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 12+ messages in thread
* Re: [PATCHv2 0/4] Bx50v3 DT improvements
  2021-03-08 15:18 ` Sebastian Reichel
@ 2021-03-15  6:09   ` Shawn Guo
  -1 siblings, 0 replies; 12+ messages in thread
From: Shawn Guo @ 2021-03-15  6:09 UTC (permalink / raw)
  To: Sebastian Reichel
  Cc: Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	NXP Linux Team, Rob Herring, devicetree, linux-arm-kernel,
	linux-kernel, kernel

On Mon, Mar 08, 2021 at 04:18:25PM +0100, Sebastian Reichel wrote:
> Bx50v3 DT improvements
> 
> These are a bunch of small unrelated improvements for the GE Bx50v3
> device tree (and BA16 system on module, which is currently only used
> by Bx50v3).
> 
> Changes since PATCHv1 [1]:
>  * change patch prefix for BA16 patches
>  * remove extra newline from PATCH 1/4
>  * keep 'status' at the end of FEC in PATCH 2/4
> 
> [1] https://lore.kernel.org/lkml/20210223183346.138575-1-sebastian.reichel@collabora.com/
> 
> Thanks for reviewing/merging them,
> 
> -- Sebastian
> 
> Ian Ray (1):
>   ARM: dts: imx: bx50v3: Define GPIO line names
> 
> Sebastian Reichel (3):
>   ARM: dts: imx6q-ba16: add USB OTG VBUS enable GPIO
>   ARM: dts: imx6q-ba16: improve PHY information
>   ARM: dts: imx: bx50v3: i2c GPIOs are open drain

Applied all, thanks.

^ permalink raw reply	[flat|nested] 12+ messages in thread
* Re: [PATCHv2 0/4] Bx50v3 DT improvements
@ 2021-03-15  6:09   ` Shawn Guo
  0 siblings, 0 replies; 12+ messages in thread
From: Shawn Guo @ 2021-03-15  6:09 UTC (permalink / raw)
  To: Sebastian Reichel
  Cc: Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	NXP Linux Team, Rob Herring, devicetree, linux-arm-kernel,
	linux-kernel, kernel

On Mon, Mar 08, 2021 at 04:18:25PM +0100, Sebastian Reichel wrote:
> Bx50v3 DT improvements
> 
> These are a bunch of small unrelated improvements for the GE Bx50v3
> device tree (and BA16 system on module, which is currently only used
> by Bx50v3).
> 
> Changes since PATCHv1 [1]:
>  * change patch prefix for BA16 patches
>  * remove extra newline from PATCH 1/4
>  * keep 'status' at the end of FEC in PATCH 2/4
> 
> [1] https://lore.kernel.org/lkml/20210223183346.138575-1-sebastian.reichel@collabora.com/
> 
> Thanks for reviewing/merging them,
> 
> -- Sebastian
> 
> Ian Ray (1):
>   ARM: dts: imx: bx50v3: Define GPIO line names
> 
> Sebastian Reichel (3):
>   ARM: dts: imx6q-ba16: add USB OTG VBUS enable GPIO
>   ARM: dts: imx6q-ba16: improve PHY information
>   ARM: dts: imx: bx50v3: i2c GPIOs are open drain

Applied all, thanks.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 12+ messages in thread
end of thread, other threads:[~2021-03-15  6:11 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-08 15:18 [PATCHv2 0/4] Bx50v3 DT improvements Sebastian Reichel
2021-03-08 15:18 ` Sebastian Reichel
2021-03-08 15:18 ` [PATCHv2 1/4] ARM: dts: imx6q-ba16: add USB OTG VBUS enable GPIO Sebastian Reichel
2021-03-08 15:18   ` Sebastian Reichel
2021-03-08 15:18 ` [PATCHv2 2/4] ARM: dts: imx6q-ba16: improve PHY information Sebastian Reichel
2021-03-08 15:18   ` Sebastian Reichel
2021-03-08 15:18 ` [PATCHv2 3/4] ARM: dts: imx: bx50v3: i2c GPIOs are open drain Sebastian Reichel
2021-03-08 15:18   ` Sebastian Reichel
2021-03-08 15:18 ` [PATCHv2 4/4] ARM: dts: imx: bx50v3: Define GPIO line names Sebastian Reichel
2021-03-08 15:18   ` Sebastian Reichel
2021-03-15  6:09 ` [PATCHv2 0/4] Bx50v3 DT improvements Shawn Guo
2021-03-15  6:09   ` Shawn Guo

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.