All of lore.kernel.org
 help / color / mirror / Atom feed
From: Henning Schild <henning.schild@siemens.com>
To: linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org,
	platform-driver-x86@vger.kernel.org,
	linux-watchdog@vger.kernel.org
Cc: Srikanth Krishnakar <skrishnakar@gmail.com>,
	Jan Kiszka <jan.kiszka@siemens.com>,
	Henning Schild <henning.schild@siemens.com>,
	Gerd Haeussler <gerd.haeussler.ext@siemens.com>,
	Guenter Roeck <linux@roeck-us.net>,
	Wim Van Sebroeck <wim@linux-watchdog.org>,
	Mark Gross <mgross@linux.intel.com>,
	Hans de Goede <hdegoede@redhat.com>, Pavel Machek <pavel@ucw.cz>,
	Andy Shevchenko <andy.shevchenko@gmail.com>
Subject: [PATCH v2 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
Date: Mon, 15 Mar 2021 10:57:08 +0100	[thread overview]
Message-ID: <20210315095710.7140-3-henning.schild@siemens.com> (raw)
In-Reply-To: <20210315095710.7140-1-henning.schild@siemens.com>

This driver adds initial support for several devices from Siemens. It is
based on a platform driver introduced in an earlier commit.

Signed-off-by: Henning Schild <henning.schild@siemens.com>
---
 drivers/leds/Kconfig                   |   3 +
 drivers/leds/Makefile                  |   3 +
 drivers/leds/simple/Kconfig            |  11 ++
 drivers/leds/simple/Makefile           |   2 +
 drivers/leds/simple/simatic-ipc-leds.c | 210 +++++++++++++++++++++++++
 5 files changed, 229 insertions(+)
 create mode 100644 drivers/leds/simple/Kconfig
 create mode 100644 drivers/leds/simple/Makefile
 create mode 100644 drivers/leds/simple/simatic-ipc-leds.c

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index b6742b4231bf..5c8558a4fa60 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -937,4 +937,7 @@ source "drivers/leds/trigger/Kconfig"
 comment "LED Blink"
 source "drivers/leds/blink/Kconfig"
 
+comment "Simple LED drivers"
+source "drivers/leds/simple/Kconfig"
+
 endif # NEW_LEDS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 2a698df9da57..2de7fdd8d629 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -111,3 +111,6 @@ obj-$(CONFIG_LEDS_TRIGGERS)		+= trigger/
 
 # LED Blink
 obj-$(CONFIG_LEDS_BLINK)                += blink/
+
+# Simple LED drivers
+obj-y					+= simple/
diff --git a/drivers/leds/simple/Kconfig b/drivers/leds/simple/Kconfig
new file mode 100644
index 000000000000..9f6a68336659
--- /dev/null
+++ b/drivers/leds/simple/Kconfig
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config LEDS_SIEMENS_SIMATIC_IPC
+	tristate "LED driver for Siemens Simatic IPCs"
+	depends on LEDS_CLASS
+	depends on SIEMENS_SIMATIC_IPC
+	help
+	  This option enables support for the LEDs of several Industrial PCs
+	  from Siemens.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called simatic-ipc-leds.
diff --git a/drivers/leds/simple/Makefile b/drivers/leds/simple/Makefile
new file mode 100644
index 000000000000..8481f1e9e360
--- /dev/null
+++ b/drivers/leds/simple/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_LEDS_SIEMENS_SIMATIC_IPC)	+= simatic-ipc-leds.o
diff --git a/drivers/leds/simple/simatic-ipc-leds.c b/drivers/leds/simple/simatic-ipc-leds.c
new file mode 100644
index 000000000000..0f7e6320e10d
--- /dev/null
+++ b/drivers/leds/simple/simatic-ipc-leds.c
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Siemens SIMATIC IPC driver for LEDs
+ *
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ *  Henning Schild <henning.schild@siemens.com>
+ *  Jan Kiszka <jan.kiszka@siemens.com>
+ *  Gerd Haeussler <gerd.haeussler.ext@siemens.com>
+ */
+
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_data/x86/simatic-ipc-base.h>
+#include <linux/platform_device.h>
+#include <linux/sizes.h>
+#include <linux/spinlock.h>
+
+#define SIMATIC_IPC_LED_PORT_BASE	0x404E
+
+struct simatic_ipc_led {
+	unsigned int value; /* mask for io and offset for mem */
+	char name[32];
+	struct led_classdev cdev;
+};
+
+static struct simatic_ipc_led simatic_ipc_leds_io[] = {
+	{1 << 15, "simatic-ipc:green:" LED_FUNCTION_STATUS "-1" },
+	{1 << 7,  "simatic-ipc:yellow:" LED_FUNCTION_STATUS "-1" },
+	{1 << 14, "simatic-ipc:red:" LED_FUNCTION_STATUS "-2" },
+	{1 << 6,  "simatic-ipc:yellow:" LED_FUNCTION_STATUS "-2" },
+	{1 << 13, "simatic-ipc:red:" LED_FUNCTION_STATUS "-3" },
+	{1 << 5,  "simatic-ipc:yellow:" LED_FUNCTION_STATUS "-3" },
+	{0, ""},
+};
+
+/* the actual start will be discovered with pci, 0 is a placeholder */
+struct resource simatic_ipc_led_mem_res =
+	DEFINE_RES_MEM_NAMED(0, SZ_4K, KBUILD_MODNAME);
+
+static void *simatic_ipc_led_memory;
+
+static struct simatic_ipc_led simatic_ipc_leds_mem[] = {
+	{0x500 + 0x1A0, "simatic-ipc:red:" LED_FUNCTION_STATUS "-1"},
+	{0x500 + 0x1A8, "simatic-ipc:green:" LED_FUNCTION_STATUS "-1"},
+	{0x500 + 0x1C8, "simatic-ipc:red:" LED_FUNCTION_STATUS "-2"},
+	{0x500 + 0x1D0, "simatic-ipc:green:" LED_FUNCTION_STATUS "-2"},
+	{0x500 + 0x1E0, "simatic-ipc:red:" LED_FUNCTION_STATUS "-3"},
+	{0x500 + 0x198, "simatic-ipc:green:" LED_FUNCTION_STATUS "-3"},
+	{0, ""},
+};
+
+static struct resource simatic_ipc_led_io_res =
+	DEFINE_RES_IO_NAMED(SIMATIC_IPC_LED_PORT_BASE, SZ_1, KBUILD_MODNAME);
+
+static DEFINE_SPINLOCK(reg_lock);
+
+static void simatic_ipc_led_set_io(struct led_classdev *led_cd,
+				   enum led_brightness brightness)
+{
+	struct simatic_ipc_led *led =
+		container_of(led_cd, struct simatic_ipc_led, cdev);
+	unsigned long flags;
+	unsigned int val;
+
+	spin_lock_irqsave(&reg_lock, flags);
+
+	val = inw(SIMATIC_IPC_LED_PORT_BASE);
+	if (brightness == LED_OFF)
+		outw(val | led->value, SIMATIC_IPC_LED_PORT_BASE);
+	else
+		outw(val & ~led->value, SIMATIC_IPC_LED_PORT_BASE);
+
+	spin_unlock_irqrestore(&reg_lock, flags);
+}
+
+static enum led_brightness simatic_ipc_led_get_io(struct led_classdev *led_cd)
+{
+	struct simatic_ipc_led *led =
+		container_of(led_cd, struct simatic_ipc_led, cdev);
+
+	return inw(SIMATIC_IPC_LED_PORT_BASE) & led->value ?
+		LED_OFF : led_cd->max_brightness;
+}
+
+static void simatic_ipc_led_set_mem(struct led_classdev *led_cd,
+				    enum led_brightness brightness)
+{
+	struct simatic_ipc_led *led =
+		container_of(led_cd, struct simatic_ipc_led, cdev);
+
+	u32 *p;
+
+	p = simatic_ipc_led_memory + led->value;
+	*p = (*p & ~1) | (brightness == LED_OFF);
+}
+
+static enum led_brightness simatic_ipc_led_get_mem(struct led_classdev *led_cd)
+{
+	struct simatic_ipc_led *led =
+		container_of(led_cd, struct simatic_ipc_led, cdev);
+
+	u32 *p;
+
+	p = simatic_ipc_led_memory + led->value;
+	return (*p & 1) ? LED_OFF : led_cd->max_brightness;
+}
+
+static int simatic_ipc_leds_probe(struct platform_device *pdev)
+{
+	struct simatic_ipc_platform *plat;
+	struct device *dev = &pdev->dev;
+	struct simatic_ipc_led *ipcled;
+	struct led_classdev *cdev;
+	struct resource *res;
+	int err, type;
+	u32 *p;
+
+	plat = pdev->dev.platform_data;
+
+	switch (plat->devmode) {
+	case SIMATIC_IPC_DEVICE_227D:
+	case SIMATIC_IPC_DEVICE_427E:
+		res = &simatic_ipc_led_io_res;
+		ipcled = simatic_ipc_leds_io;
+		/* the 227D is high on while 427E is low on, invert the struct
+		 * we have
+		 */
+		if (plat->devmode == SIMATIC_IPC_DEVICE_227D) {
+			while (ipcled->value) {
+				ipcled->value = swab16(ipcled->value);
+				ipcled++;
+			}
+			ipcled = simatic_ipc_leds_io;
+		}
+		type = IORESOURCE_IO;
+		if (!devm_request_region(dev, res->start,
+					 resource_size(res),
+					 KBUILD_MODNAME)) {
+			dev_err(dev,
+				"Unable to register IO resource at %pR\n",
+				res);
+			return -EBUSY;
+		}
+		break;
+	case SIMATIC_IPC_DEVICE_127E:
+		res = &simatic_ipc_led_mem_res;
+		ipcled = simatic_ipc_leds_mem;
+		type = IORESOURCE_MEM;
+
+		/* get GPIO base from PCI */
+		res->start = simatic_ipc_get_membase0(PCI_DEVFN(13, 0));
+		if (res->start == 0)
+			return -ENODEV;
+
+		/* do the final address calculation */
+		res->start = res->start + (0xC5 << 16);
+		res->end += res->start;
+
+		simatic_ipc_led_memory = devm_ioremap_resource(dev, res);
+		if (IS_ERR(simatic_ipc_led_memory))
+			return PTR_ERR(simatic_ipc_led_memory);
+
+		/* initialize power/watchdog LED */
+		p = simatic_ipc_led_memory + 0x500 + 0x1D8; /* PM_WDT_OUT */
+		*p = (*p & ~1);
+		p = simatic_ipc_led_memory + 0x500 + 0x1C0; /* PM_BIOS_BOOT_N */
+		*p = (*p | 1);
+
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	while (ipcled->value) {
+		cdev = &ipcled->cdev;
+		cdev->brightness_set = simatic_ipc_led_set_io;
+		cdev->brightness_get = simatic_ipc_led_get_io;
+		if (type == IORESOURCE_MEM) {
+			cdev->brightness_set = simatic_ipc_led_set_mem;
+			cdev->brightness_get = simatic_ipc_led_get_mem;
+		}
+		cdev->max_brightness = LED_ON;
+		cdev->name = ipcled->name;
+
+		err = devm_led_classdev_register(dev, cdev);
+		if (err < 0)
+			return err;
+		ipcled++;
+	}
+
+	return 0;
+}
+
+static struct platform_driver led_driver = {
+	.probe = simatic_ipc_leds_probe,
+	.driver = {
+		.name = KBUILD_MODNAME,
+	},
+};
+
+module_platform_driver(led_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" KBUILD_MODNAME);
+MODULE_AUTHOR("Henning Schild <henning.schild@siemens.com>");
-- 
2.26.2


  parent reply	other threads:[~2021-03-15  9:58 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-15  9:57 [PATCH v2 0/4] add device drivers for Siemens Industrial PCs Henning Schild
2021-03-15  9:57 ` [PATCH v2 1/4] platform/x86: simatic-ipc: add main driver for Siemens devices Henning Schild
2021-03-15 10:31   ` Andy Shevchenko
2021-03-15 16:30     ` Henning Schild
2021-03-17 19:13     ` Henning Schild
2021-03-17 20:03       ` Hans de Goede
2021-03-18 11:30         ` Enrico Weigelt, metux IT consult
2021-03-18 11:45           ` Hans de Goede
2021-03-26  9:55             ` Henning Schild
2021-03-26 12:21               ` Hans de Goede
2021-03-15  9:57 ` Henning Schild [this message]
2021-03-15 10:48   ` [PATCH v2 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs Andy Shevchenko
2021-03-15 11:19     ` Pavel Machek
2021-03-15 11:26       ` Andy Shevchenko
2021-03-15 12:40       ` Henning Schild
2021-03-18 11:38       ` Enrico Weigelt, metux IT consult
2021-03-27  9:46         ` Henning Schild
2021-04-01 16:20           ` Enrico Weigelt, metux IT consult
2021-03-27  9:56       ` Henning Schild
2021-03-18 10:27     ` Enrico Weigelt, metux IT consult
2021-03-18 12:40       ` Alexander Dahl
2021-03-23 17:45         ` Henning Schild
2021-03-26 16:33     ` Henning Schild
2021-03-18 10:25   ` Enrico Weigelt, metux IT consult
2021-03-27 11:16     ` Henning Schild
2021-03-27 11:41       ` Henning Schild
2021-03-15  9:57 ` [PATCH v2 3/4] watchdog: simatic-ipc-wdt: add new driver for Siemens Industrial PCs Henning Schild
2021-03-15 15:10   ` Guenter Roeck
2021-03-29 16:28     ` Henning Schild
2021-03-15  9:57 ` [PATCH v2 4/4] platform/x86: pmc_atom: improve critclk_systems matching for Siemens PCs Henning Schild
2021-03-15 10:14   ` Henning Schild
2021-03-15 10:19     ` Hans de Goede
2021-03-15 12:09       ` Henning Schild
2021-03-15 14:58       ` [PATCH] platform/x86: pmc_atom: use callback for all dmi quirk entries Henning Schild
2021-03-15 16:31         ` Hans de Goede
2021-03-15 17:00           ` Henning Schild
2021-03-15 18:01             ` Hans de Goede
2021-03-16  5:47               ` Henning Schild
2021-03-16  9:43                 ` Hans de Goede
2021-03-15 13:25   ` [PATCH v2 4/4] platform/x86: pmc_atom: improve critclk_systems matching for Siemens PCs kernel test robot
2021-03-15 13:25     ` kernel test robot
2021-03-15 10:55 ` [PATCH v2 0/4] add device drivers for Siemens Industrial PCs Andy Shevchenko
2021-03-15 16:08   ` Henning Schild
2021-08-02  9:21   ` Henning Schild

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210315095710.7140-3-henning.schild@siemens.com \
    --to=henning.schild@siemens.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=gerd.haeussler.ext@siemens.com \
    --cc=hdegoede@redhat.com \
    --cc=jan.kiszka@siemens.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mgross@linux.intel.com \
    --cc=pavel@ucw.cz \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=skrishnakar@gmail.com \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.