All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jerome Pouiller <Jerome.Pouiller@silabs.com>
To: linux-wireless@vger.kernel.org, netdev@vger.kernel.org
Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Kalle Valo" <kvalo@codeaurora.org>,
	"David S . Miller" <davem@davemloft.net>,
	devicetree@vger.kernel.org, "Rob Herring" <robh+dt@kernel.org>,
	linux-mmc@vger.kernel.org, "Pali Rohár" <pali@kernel.org>,
	"Ulf Hansson" <ulf.hansson@linaro.org>,
	"Jérôme Pouiller" <jerome.pouiller@silabs.com>
Subject: [PATCH v5 10/24] wfx: add fwio.c/fwio.h
Date: Mon, 15 Mar 2021 14:24:47 +0100	[thread overview]
Message-ID: <20210315132501.441681-11-Jerome.Pouiller@silabs.com> (raw)
In-Reply-To: <20210315132501.441681-1-Jerome.Pouiller@silabs.com>

From: Jérôme Pouiller <jerome.pouiller@silabs.com>

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
---
 drivers/net/wireless/silabs/wfx/fwio.c | 405 +++++++++++++++++++++++++
 drivers/net/wireless/silabs/wfx/fwio.h |  15 +
 2 files changed, 420 insertions(+)
 create mode 100644 drivers/net/wireless/silabs/wfx/fwio.c
 create mode 100644 drivers/net/wireless/silabs/wfx/fwio.h

diff --git a/drivers/net/wireless/silabs/wfx/fwio.c b/drivers/net/wireless/silabs/wfx/fwio.c
new file mode 100644
index 000000000000..3c8b0b787f42
--- /dev/null
+++ b/drivers/net/wireless/silabs/wfx/fwio.c
@@ -0,0 +1,405 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Firmware loading.
+ *
+ * Copyright (c) 2017-2020, Silicon Laboratories, Inc.
+ * Copyright (c) 2010, ST-Ericsson
+ */
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/bitfield.h>
+
+#include "fwio.h"
+#include "wfx.h"
+#include "hwio.h"
+
+/* Addresses below are in SRAM area */
+#define WFX_DNLD_FIFO             0x09004000
+#define     DNLD_BLOCK_SIZE           0x0400
+#define     DNLD_FIFO_SIZE            0x8000 /* (32 * DNLD_BLOCK_SIZE) */
+/* Download Control Area (DCA) */
+#define WFX_DCA_IMAGE_SIZE        0x0900C000
+#define WFX_DCA_PUT               0x0900C004
+#define WFX_DCA_GET               0x0900C008
+#define WFX_DCA_HOST_STATUS       0x0900C00C
+#define     HOST_READY                0x87654321
+#define     HOST_INFO_READ            0xA753BD99
+#define     HOST_UPLOAD_PENDING       0xABCDDCBA
+#define     HOST_UPLOAD_COMPLETE      0xD4C64A99
+#define     HOST_OK_TO_JUMP           0x174FC882
+#define WFX_DCA_NCP_STATUS        0x0900C010
+#define     NCP_NOT_READY             0x12345678
+#define     NCP_READY                 0x87654321
+#define     NCP_INFO_READY            0xBD53EF99
+#define     NCP_DOWNLOAD_PENDING      0xABCDDCBA
+#define     NCP_DOWNLOAD_COMPLETE     0xCAFEFECA
+#define     NCP_AUTH_OK               0xD4C64A99
+#define     NCP_AUTH_FAIL             0x174FC882
+#define     NCP_PUB_KEY_RDY           0x7AB41D19
+#define WFX_DCA_FW_SIGNATURE      0x0900C014
+#define     FW_SIGNATURE_SIZE         0x40
+#define WFX_DCA_FW_HASH           0x0900C054
+#define     FW_HASH_SIZE              0x08
+#define WFX_DCA_FW_VERSION        0x0900C05C
+#define     FW_VERSION_SIZE           0x04
+#define WFX_DCA_RESERVED          0x0900C060
+#define     DCA_RESERVED_SIZE         0x20
+#define WFX_STATUS_INFO           0x0900C080
+#define WFX_BOOTLOADER_LABEL      0x0900C084
+#define     BOOTLOADER_LABEL_SIZE     0x3C
+#define WFX_PTE_INFO              0x0900C0C0
+#define     PTE_INFO_KEYSET_IDX       0x0D
+#define     PTE_INFO_SIZE             0x10
+#define WFX_ERR_INFO              0x0900C0D0
+#define     ERR_INVALID_SEC_TYPE      0x05
+#define     ERR_SIG_VERIF_FAILED      0x0F
+#define     ERR_AES_CTRL_KEY          0x10
+#define     ERR_ECC_PUB_KEY           0x11
+#define     ERR_MAC_KEY               0x18
+
+#define DCA_TIMEOUT  50 /* milliseconds */
+#define WAKEUP_TIMEOUT 200 /* milliseconds */
+
+static const char * const fwio_errors[] = {
+	[ERR_INVALID_SEC_TYPE] = "Invalid section type or wrong encryption",
+	[ERR_SIG_VERIF_FAILED] = "Signature verification failed",
+	[ERR_AES_CTRL_KEY] = "AES control key not initialized",
+	[ERR_ECC_PUB_KEY] = "ECC public key not initialized",
+	[ERR_MAC_KEY] = "MAC key not initialized",
+};
+
+/* request_firmware() allocate data using vmalloc(). It is not compatible with
+ * underlying hardware that use DMA. Function below detect this case and
+ * allocate a bounce buffer if necessary.
+ *
+ * Notice that, in doubt, you can enable CONFIG_DEBUG_SG to ask kernel to
+ * detect this problem at runtime  (else, kernel silently fail).
+ *
+ * NOTE: it may also be possible to use 'pages' from struct firmware and avoid
+ * bounce buffer
+ */
+static int sram_write_dma_safe(struct wfx_dev *wdev, u32 addr, const u8 *buf,
+			       size_t len)
+{
+	int ret;
+	const u8 *tmp;
+
+	if (!virt_addr_valid(buf)) {
+		tmp = kmemdup(buf, len, GFP_KERNEL);
+		if (!tmp)
+			return -ENOMEM;
+	} else {
+		tmp = buf;
+	}
+	ret = sram_buf_write(wdev, addr, tmp, len);
+	if (tmp != buf)
+		kfree(tmp);
+	return ret;
+}
+
+static int get_firmware(struct wfx_dev *wdev, u32 keyset_chip,
+			const struct firmware **fw, int *file_offset)
+{
+	int keyset_file;
+	char filename[256];
+	const char *data;
+	int ret;
+
+	snprintf(filename, sizeof(filename), "%s_%02X.sec",
+		 wdev->pdata.file_fw, keyset_chip);
+	ret = firmware_request_nowarn(fw, filename, wdev->dev);
+	if (ret) {
+		dev_info(wdev->dev, "can't load %s, falling back to %s.sec\n",
+			 filename, wdev->pdata.file_fw);
+		snprintf(filename, sizeof(filename), "%s.sec",
+			 wdev->pdata.file_fw);
+		ret = request_firmware(fw, filename, wdev->dev);
+		if (ret) {
+			dev_err(wdev->dev, "can't load %s\n", filename);
+			*fw = NULL;
+			return ret;
+		}
+	}
+
+	data = (*fw)->data;
+	if (memcmp(data, "KEYSET", 6) != 0) {
+		/* Legacy firmware format */
+		*file_offset = 0;
+		keyset_file = 0x90;
+	} else {
+		*file_offset = 8;
+		keyset_file = (hex_to_bin(data[6]) * 16) | hex_to_bin(data[7]);
+		if (keyset_file < 0) {
+			dev_err(wdev->dev, "%s corrupted\n", filename);
+			release_firmware(*fw);
+			*fw = NULL;
+			return -EINVAL;
+		}
+	}
+	if (keyset_file != keyset_chip) {
+		dev_err(wdev->dev, "firmware keyset is incompatible with chip (file: 0x%02X, chip: 0x%02X)\n",
+			keyset_file, keyset_chip);
+		release_firmware(*fw);
+		*fw = NULL;
+		return -ENODEV;
+	}
+	wdev->keyset = keyset_file;
+	return 0;
+}
+
+static int wait_ncp_status(struct wfx_dev *wdev, u32 status)
+{
+	ktime_t now, start;
+	u32 reg;
+	int ret;
+
+	start = ktime_get();
+	for (;;) {
+		ret = sram_reg_read(wdev, WFX_DCA_NCP_STATUS, &reg);
+		if (ret < 0)
+			return -EIO;
+		now = ktime_get();
+		if (reg == status)
+			break;
+		if (ktime_after(now, ktime_add_ms(start, DCA_TIMEOUT)))
+			return -ETIMEDOUT;
+	}
+	if (ktime_compare(now, start))
+		dev_dbg(wdev->dev, "chip answer after %lldus\n",
+			ktime_us_delta(now, start));
+	else
+		dev_dbg(wdev->dev, "chip answer immediately\n");
+	return 0;
+}
+
+static int upload_firmware(struct wfx_dev *wdev, const u8 *data, size_t len)
+{
+	int ret;
+	u32 offs, bytes_done = 0;
+	ktime_t now, start;
+
+	if (len % DNLD_BLOCK_SIZE) {
+		dev_err(wdev->dev, "firmware size is not aligned. Buffer overrun will occur\n");
+		return -EIO;
+	}
+	offs = 0;
+	while (offs < len) {
+		start = ktime_get();
+		for (;;) {
+			now = ktime_get();
+			if (offs + DNLD_BLOCK_SIZE - bytes_done < DNLD_FIFO_SIZE)
+				break;
+			if (ktime_after(now, ktime_add_ms(start, DCA_TIMEOUT)))
+				return -ETIMEDOUT;
+			ret = sram_reg_read(wdev, WFX_DCA_GET, &bytes_done);
+			if (ret < 0)
+				return ret;
+		}
+		if (ktime_compare(now, start))
+			dev_dbg(wdev->dev, "answer after %lldus\n",
+				ktime_us_delta(now, start));
+
+		ret = sram_write_dma_safe(wdev, WFX_DNLD_FIFO +
+					  (offs % DNLD_FIFO_SIZE),
+					  data + offs, DNLD_BLOCK_SIZE);
+		if (ret < 0)
+			return ret;
+
+		/* WFx seems to not support writing 0 in this register during
+		 * first loop
+		 */
+		offs += DNLD_BLOCK_SIZE;
+		ret = sram_reg_write(wdev, WFX_DCA_PUT, offs);
+		if (ret < 0)
+			return ret;
+	}
+	return 0;
+}
+
+static void print_boot_status(struct wfx_dev *wdev)
+{
+	u32 reg;
+
+	sram_reg_read(wdev, WFX_STATUS_INFO, &reg);
+	if (reg == 0x12345678)
+		return;
+	sram_reg_read(wdev, WFX_ERR_INFO, &reg);
+	if (reg < ARRAY_SIZE(fwio_errors) && fwio_errors[reg])
+		dev_info(wdev->dev, "secure boot: %s\n", fwio_errors[reg]);
+	else
+		dev_info(wdev->dev, "secure boot: Error %#02x\n", reg);
+}
+
+static int load_firmware_secure(struct wfx_dev *wdev)
+{
+	const struct firmware *fw = NULL;
+	int header_size;
+	int fw_offset;
+	ktime_t start;
+	u8 *buf;
+	int ret;
+
+	BUILD_BUG_ON(PTE_INFO_SIZE > BOOTLOADER_LABEL_SIZE);
+	buf = kmalloc(BOOTLOADER_LABEL_SIZE + 1, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	sram_reg_write(wdev, WFX_DCA_HOST_STATUS, HOST_READY);
+	ret = wait_ncp_status(wdev, NCP_INFO_READY);
+	if (ret)
+		goto error;
+
+	sram_buf_read(wdev, WFX_BOOTLOADER_LABEL, buf, BOOTLOADER_LABEL_SIZE);
+	buf[BOOTLOADER_LABEL_SIZE] = 0;
+	dev_dbg(wdev->dev, "bootloader: \"%s\"\n", buf);
+
+	sram_buf_read(wdev, WFX_PTE_INFO, buf, PTE_INFO_SIZE);
+	ret = get_firmware(wdev, buf[PTE_INFO_KEYSET_IDX], &fw, &fw_offset);
+	if (ret)
+		goto error;
+	header_size = fw_offset + FW_SIGNATURE_SIZE + FW_HASH_SIZE;
+
+	sram_reg_write(wdev, WFX_DCA_HOST_STATUS, HOST_INFO_READ);
+	ret = wait_ncp_status(wdev, NCP_READY);
+	if (ret)
+		goto error;
+
+	sram_reg_write(wdev, WFX_DNLD_FIFO, 0xFFFFFFFF); /* Fifo init */
+	sram_write_dma_safe(wdev, WFX_DCA_FW_VERSION, "\x01\x00\x00\x00",
+			    FW_VERSION_SIZE);
+	sram_write_dma_safe(wdev, WFX_DCA_FW_SIGNATURE, fw->data + fw_offset,
+			    FW_SIGNATURE_SIZE);
+	sram_write_dma_safe(wdev, WFX_DCA_FW_HASH,
+			    fw->data + fw_offset + FW_SIGNATURE_SIZE,
+			    FW_HASH_SIZE);
+	sram_reg_write(wdev, WFX_DCA_IMAGE_SIZE, fw->size - header_size);
+	sram_reg_write(wdev, WFX_DCA_HOST_STATUS, HOST_UPLOAD_PENDING);
+	ret = wait_ncp_status(wdev, NCP_DOWNLOAD_PENDING);
+	if (ret)
+		goto error;
+
+	start = ktime_get();
+	ret = upload_firmware(wdev, fw->data + header_size,
+			      fw->size - header_size);
+	if (ret)
+		goto error;
+	dev_dbg(wdev->dev, "firmware load after %lldus\n",
+		ktime_us_delta(ktime_get(), start));
+
+	sram_reg_write(wdev, WFX_DCA_HOST_STATUS, HOST_UPLOAD_COMPLETE);
+	ret = wait_ncp_status(wdev, NCP_AUTH_OK);
+	/* Legacy ROM support */
+	if (ret < 0)
+		ret = wait_ncp_status(wdev, NCP_PUB_KEY_RDY);
+	if (ret < 0)
+		goto error;
+	sram_reg_write(wdev, WFX_DCA_HOST_STATUS, HOST_OK_TO_JUMP);
+
+error:
+	kfree(buf);
+	if (fw)
+		release_firmware(fw);
+	if (ret)
+		print_boot_status(wdev);
+	return ret;
+}
+
+static int init_gpr(struct wfx_dev *wdev)
+{
+	int ret, i;
+	static const struct {
+		int index;
+		u32 value;
+	} gpr_init[] = {
+		{ 0x07, 0x208775 },
+		{ 0x08, 0x2EC020 },
+		{ 0x09, 0x3C3C3C },
+		{ 0x0B, 0x322C44 },
+		{ 0x0C, 0xA06497 },
+	};
+
+	for (i = 0; i < ARRAY_SIZE(gpr_init); i++) {
+		ret = igpr_reg_write(wdev, gpr_init[i].index,
+				     gpr_init[i].value);
+		if (ret < 0)
+			return ret;
+		dev_dbg(wdev->dev, "  index %02x: %08x\n",
+			gpr_init[i].index, gpr_init[i].value);
+	}
+	return 0;
+}
+
+int wfx_init_device(struct wfx_dev *wdev)
+{
+	int ret;
+	int hw_revision, hw_type;
+	int wakeup_timeout = 50; /* ms */
+	ktime_t now, start;
+	u32 reg;
+
+	reg = CFG_DIRECT_ACCESS_MODE | CFG_CPU_RESET | CFG_BYTE_ORDER_ABCD;
+	if (wdev->pdata.use_rising_clk)
+		reg |= CFG_CLK_RISE_EDGE;
+	ret = config_reg_write(wdev, reg);
+	if (ret < 0) {
+		dev_err(wdev->dev, "bus returned an error during first write access. Host configuration error?\n");
+		return -EIO;
+	}
+
+	ret = config_reg_read(wdev, &reg);
+	if (ret < 0) {
+		dev_err(wdev->dev, "bus returned an error during first read access. Bus configuration error?\n");
+		return -EIO;
+	}
+	if (reg == 0 || reg == ~0) {
+		dev_err(wdev->dev, "chip mute. Bus configuration error or chip wasn't reset?\n");
+		return -EIO;
+	}
+	dev_dbg(wdev->dev, "initial config register value: %08x\n", reg);
+
+	hw_revision = FIELD_GET(CFG_DEVICE_ID_MAJOR, reg);
+	if (hw_revision == 0) {
+		dev_err(wdev->dev, "bad hardware revision number: %d\n",
+			hw_revision);
+		return -ENODEV;
+	}
+	hw_type = FIELD_GET(CFG_DEVICE_ID_TYPE, reg);
+	if (hw_type == 1) {
+		dev_notice(wdev->dev, "development hardware detected\n");
+		wakeup_timeout = 2000;
+	}
+
+	ret = init_gpr(wdev);
+	if (ret < 0)
+		return ret;
+
+	ret = control_reg_write(wdev, CTRL_WLAN_WAKEUP);
+	if (ret < 0)
+		return -EIO;
+	start = ktime_get();
+	for (;;) {
+		ret = control_reg_read(wdev, &reg);
+		now = ktime_get();
+		if (reg & CTRL_WLAN_READY)
+			break;
+		if (ktime_after(now, ktime_add_ms(start, wakeup_timeout))) {
+			dev_err(wdev->dev, "chip didn't wake up. Chip wasn't reset?\n");
+			return -ETIMEDOUT;
+		}
+	}
+	dev_dbg(wdev->dev, "chip wake up after %lldus\n",
+		ktime_us_delta(now, start));
+
+	ret = config_reg_write_bits(wdev, CFG_CPU_RESET, 0);
+	if (ret < 0)
+		return ret;
+	ret = load_firmware_secure(wdev);
+	if (ret < 0)
+		return ret;
+	return config_reg_write_bits(wdev,
+				     CFG_DIRECT_ACCESS_MODE |
+				     CFG_IRQ_ENABLE_DATA |
+				     CFG_IRQ_ENABLE_WRDY,
+				     CFG_IRQ_ENABLE_DATA);
+}
diff --git a/drivers/net/wireless/silabs/wfx/fwio.h b/drivers/net/wireless/silabs/wfx/fwio.h
new file mode 100644
index 000000000000..eeea61210eca
--- /dev/null
+++ b/drivers/net/wireless/silabs/wfx/fwio.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Firmware loading.
+ *
+ * Copyright (c) 2017-2019, Silicon Laboratories, Inc.
+ * Copyright (c) 2010, ST-Ericsson
+ */
+#ifndef WFX_FWIO_H
+#define WFX_FWIO_H
+
+struct wfx_dev;
+
+int wfx_init_device(struct wfx_dev *wdev);
+
+#endif
-- 
2.30.2


WARNING: multiple messages have this Message-ID
From: Jerome Pouiller <Jerome.Pouiller@silabs.com>
To: linux-wireless@vger.kernel.org, netdev@vger.kernel.org
Cc: devel@driverdev.osuosl.org, devicetree@vger.kernel.org,
	"Ulf Hansson" <ulf.hansson@linaro.org>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Rob Herring" <robh+dt@kernel.org>,
	"Pali Rohár" <pali@kernel.org>,
	"David S . Miller" <davem@davemloft.net>,
	"Kalle Valo" <kvalo@codeaurora.org>
Subject: [PATCH v5 10/24] wfx: add fwio.c/fwio.h
Date: Mon, 15 Mar 2021 14:24:47 +0100	[thread overview]
Message-ID: <20210315132501.441681-11-Jerome.Pouiller@silabs.com> (raw)
In-Reply-To: <20210315132501.441681-1-Jerome.Pouiller@silabs.com>

From: Jérôme Pouiller <jerome.pouiller@silabs.com>

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
---
 drivers/net/wireless/silabs/wfx/fwio.c | 405 +++++++++++++++++++++++++
 drivers/net/wireless/silabs/wfx/fwio.h |  15 +
 2 files changed, 420 insertions(+)
 create mode 100644 drivers/net/wireless/silabs/wfx/fwio.c
 create mode 100644 drivers/net/wireless/silabs/wfx/fwio.h

diff --git a/drivers/net/wireless/silabs/wfx/fwio.c b/drivers/net/wireless/silabs/wfx/fwio.c
new file mode 100644
index 000000000000..3c8b0b787f42
--- /dev/null
+++ b/drivers/net/wireless/silabs/wfx/fwio.c
@@ -0,0 +1,405 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Firmware loading.
+ *
+ * Copyright (c) 2017-2020, Silicon Laboratories, Inc.
+ * Copyright (c) 2010, ST-Ericsson
+ */
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/bitfield.h>
+
+#include "fwio.h"
+#include "wfx.h"
+#include "hwio.h"
+
+/* Addresses below are in SRAM area */
+#define WFX_DNLD_FIFO             0x09004000
+#define     DNLD_BLOCK_SIZE           0x0400
+#define     DNLD_FIFO_SIZE            0x8000 /* (32 * DNLD_BLOCK_SIZE) */
+/* Download Control Area (DCA) */
+#define WFX_DCA_IMAGE_SIZE        0x0900C000
+#define WFX_DCA_PUT               0x0900C004
+#define WFX_DCA_GET               0x0900C008
+#define WFX_DCA_HOST_STATUS       0x0900C00C
+#define     HOST_READY                0x87654321
+#define     HOST_INFO_READ            0xA753BD99
+#define     HOST_UPLOAD_PENDING       0xABCDDCBA
+#define     HOST_UPLOAD_COMPLETE      0xD4C64A99
+#define     HOST_OK_TO_JUMP           0x174FC882
+#define WFX_DCA_NCP_STATUS        0x0900C010
+#define     NCP_NOT_READY             0x12345678
+#define     NCP_READY                 0x87654321
+#define     NCP_INFO_READY            0xBD53EF99
+#define     NCP_DOWNLOAD_PENDING      0xABCDDCBA
+#define     NCP_DOWNLOAD_COMPLETE     0xCAFEFECA
+#define     NCP_AUTH_OK               0xD4C64A99
+#define     NCP_AUTH_FAIL             0x174FC882
+#define     NCP_PUB_KEY_RDY           0x7AB41D19
+#define WFX_DCA_FW_SIGNATURE      0x0900C014
+#define     FW_SIGNATURE_SIZE         0x40
+#define WFX_DCA_FW_HASH           0x0900C054
+#define     FW_HASH_SIZE              0x08
+#define WFX_DCA_FW_VERSION        0x0900C05C
+#define     FW_VERSION_SIZE           0x04
+#define WFX_DCA_RESERVED          0x0900C060
+#define     DCA_RESERVED_SIZE         0x20
+#define WFX_STATUS_INFO           0x0900C080
+#define WFX_BOOTLOADER_LABEL      0x0900C084
+#define     BOOTLOADER_LABEL_SIZE     0x3C
+#define WFX_PTE_INFO              0x0900C0C0
+#define     PTE_INFO_KEYSET_IDX       0x0D
+#define     PTE_INFO_SIZE             0x10
+#define WFX_ERR_INFO              0x0900C0D0
+#define     ERR_INVALID_SEC_TYPE      0x05
+#define     ERR_SIG_VERIF_FAILED      0x0F
+#define     ERR_AES_CTRL_KEY          0x10
+#define     ERR_ECC_PUB_KEY           0x11
+#define     ERR_MAC_KEY               0x18
+
+#define DCA_TIMEOUT  50 /* milliseconds */
+#define WAKEUP_TIMEOUT 200 /* milliseconds */
+
+static const char * const fwio_errors[] = {
+	[ERR_INVALID_SEC_TYPE] = "Invalid section type or wrong encryption",
+	[ERR_SIG_VERIF_FAILED] = "Signature verification failed",
+	[ERR_AES_CTRL_KEY] = "AES control key not initialized",
+	[ERR_ECC_PUB_KEY] = "ECC public key not initialized",
+	[ERR_MAC_KEY] = "MAC key not initialized",
+};
+
+/* request_firmware() allocate data using vmalloc(). It is not compatible with
+ * underlying hardware that use DMA. Function below detect this case and
+ * allocate a bounce buffer if necessary.
+ *
+ * Notice that, in doubt, you can enable CONFIG_DEBUG_SG to ask kernel to
+ * detect this problem at runtime  (else, kernel silently fail).
+ *
+ * NOTE: it may also be possible to use 'pages' from struct firmware and avoid
+ * bounce buffer
+ */
+static int sram_write_dma_safe(struct wfx_dev *wdev, u32 addr, const u8 *buf,
+			       size_t len)
+{
+	int ret;
+	const u8 *tmp;
+
+	if (!virt_addr_valid(buf)) {
+		tmp = kmemdup(buf, len, GFP_KERNEL);
+		if (!tmp)
+			return -ENOMEM;
+	} else {
+		tmp = buf;
+	}
+	ret = sram_buf_write(wdev, addr, tmp, len);
+	if (tmp != buf)
+		kfree(tmp);
+	return ret;
+}
+
+static int get_firmware(struct wfx_dev *wdev, u32 keyset_chip,
+			const struct firmware **fw, int *file_offset)
+{
+	int keyset_file;
+	char filename[256];
+	const char *data;
+	int ret;
+
+	snprintf(filename, sizeof(filename), "%s_%02X.sec",
+		 wdev->pdata.file_fw, keyset_chip);
+	ret = firmware_request_nowarn(fw, filename, wdev->dev);
+	if (ret) {
+		dev_info(wdev->dev, "can't load %s, falling back to %s.sec\n",
+			 filename, wdev->pdata.file_fw);
+		snprintf(filename, sizeof(filename), "%s.sec",
+			 wdev->pdata.file_fw);
+		ret = request_firmware(fw, filename, wdev->dev);
+		if (ret) {
+			dev_err(wdev->dev, "can't load %s\n", filename);
+			*fw = NULL;
+			return ret;
+		}
+	}
+
+	data = (*fw)->data;
+	if (memcmp(data, "KEYSET", 6) != 0) {
+		/* Legacy firmware format */
+		*file_offset = 0;
+		keyset_file = 0x90;
+	} else {
+		*file_offset = 8;
+		keyset_file = (hex_to_bin(data[6]) * 16) | hex_to_bin(data[7]);
+		if (keyset_file < 0) {
+			dev_err(wdev->dev, "%s corrupted\n", filename);
+			release_firmware(*fw);
+			*fw = NULL;
+			return -EINVAL;
+		}
+	}
+	if (keyset_file != keyset_chip) {
+		dev_err(wdev->dev, "firmware keyset is incompatible with chip (file: 0x%02X, chip: 0x%02X)\n",
+			keyset_file, keyset_chip);
+		release_firmware(*fw);
+		*fw = NULL;
+		return -ENODEV;
+	}
+	wdev->keyset = keyset_file;
+	return 0;
+}
+
+static int wait_ncp_status(struct wfx_dev *wdev, u32 status)
+{
+	ktime_t now, start;
+	u32 reg;
+	int ret;
+
+	start = ktime_get();
+	for (;;) {
+		ret = sram_reg_read(wdev, WFX_DCA_NCP_STATUS, &reg);
+		if (ret < 0)
+			return -EIO;
+		now = ktime_get();
+		if (reg == status)
+			break;
+		if (ktime_after(now, ktime_add_ms(start, DCA_TIMEOUT)))
+			return -ETIMEDOUT;
+	}
+	if (ktime_compare(now, start))
+		dev_dbg(wdev->dev, "chip answer after %lldus\n",
+			ktime_us_delta(now, start));
+	else
+		dev_dbg(wdev->dev, "chip answer immediately\n");
+	return 0;
+}
+
+static int upload_firmware(struct wfx_dev *wdev, const u8 *data, size_t len)
+{
+	int ret;
+	u32 offs, bytes_done = 0;
+	ktime_t now, start;
+
+	if (len % DNLD_BLOCK_SIZE) {
+		dev_err(wdev->dev, "firmware size is not aligned. Buffer overrun will occur\n");
+		return -EIO;
+	}
+	offs = 0;
+	while (offs < len) {
+		start = ktime_get();
+		for (;;) {
+			now = ktime_get();
+			if (offs + DNLD_BLOCK_SIZE - bytes_done < DNLD_FIFO_SIZE)
+				break;
+			if (ktime_after(now, ktime_add_ms(start, DCA_TIMEOUT)))
+				return -ETIMEDOUT;
+			ret = sram_reg_read(wdev, WFX_DCA_GET, &bytes_done);
+			if (ret < 0)
+				return ret;
+		}
+		if (ktime_compare(now, start))
+			dev_dbg(wdev->dev, "answer after %lldus\n",
+				ktime_us_delta(now, start));
+
+		ret = sram_write_dma_safe(wdev, WFX_DNLD_FIFO +
+					  (offs % DNLD_FIFO_SIZE),
+					  data + offs, DNLD_BLOCK_SIZE);
+		if (ret < 0)
+			return ret;
+
+		/* WFx seems to not support writing 0 in this register during
+		 * first loop
+		 */
+		offs += DNLD_BLOCK_SIZE;
+		ret = sram_reg_write(wdev, WFX_DCA_PUT, offs);
+		if (ret < 0)
+			return ret;
+	}
+	return 0;
+}
+
+static void print_boot_status(struct wfx_dev *wdev)
+{
+	u32 reg;
+
+	sram_reg_read(wdev, WFX_STATUS_INFO, &reg);
+	if (reg == 0x12345678)
+		return;
+	sram_reg_read(wdev, WFX_ERR_INFO, &reg);
+	if (reg < ARRAY_SIZE(fwio_errors) && fwio_errors[reg])
+		dev_info(wdev->dev, "secure boot: %s\n", fwio_errors[reg]);
+	else
+		dev_info(wdev->dev, "secure boot: Error %#02x\n", reg);
+}
+
+static int load_firmware_secure(struct wfx_dev *wdev)
+{
+	const struct firmware *fw = NULL;
+	int header_size;
+	int fw_offset;
+	ktime_t start;
+	u8 *buf;
+	int ret;
+
+	BUILD_BUG_ON(PTE_INFO_SIZE > BOOTLOADER_LABEL_SIZE);
+	buf = kmalloc(BOOTLOADER_LABEL_SIZE + 1, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	sram_reg_write(wdev, WFX_DCA_HOST_STATUS, HOST_READY);
+	ret = wait_ncp_status(wdev, NCP_INFO_READY);
+	if (ret)
+		goto error;
+
+	sram_buf_read(wdev, WFX_BOOTLOADER_LABEL, buf, BOOTLOADER_LABEL_SIZE);
+	buf[BOOTLOADER_LABEL_SIZE] = 0;
+	dev_dbg(wdev->dev, "bootloader: \"%s\"\n", buf);
+
+	sram_buf_read(wdev, WFX_PTE_INFO, buf, PTE_INFO_SIZE);
+	ret = get_firmware(wdev, buf[PTE_INFO_KEYSET_IDX], &fw, &fw_offset);
+	if (ret)
+		goto error;
+	header_size = fw_offset + FW_SIGNATURE_SIZE + FW_HASH_SIZE;
+
+	sram_reg_write(wdev, WFX_DCA_HOST_STATUS, HOST_INFO_READ);
+	ret = wait_ncp_status(wdev, NCP_READY);
+	if (ret)
+		goto error;
+
+	sram_reg_write(wdev, WFX_DNLD_FIFO, 0xFFFFFFFF); /* Fifo init */
+	sram_write_dma_safe(wdev, WFX_DCA_FW_VERSION, "\x01\x00\x00\x00",
+			    FW_VERSION_SIZE);
+	sram_write_dma_safe(wdev, WFX_DCA_FW_SIGNATURE, fw->data + fw_offset,
+			    FW_SIGNATURE_SIZE);
+	sram_write_dma_safe(wdev, WFX_DCA_FW_HASH,
+			    fw->data + fw_offset + FW_SIGNATURE_SIZE,
+			    FW_HASH_SIZE);
+	sram_reg_write(wdev, WFX_DCA_IMAGE_SIZE, fw->size - header_size);
+	sram_reg_write(wdev, WFX_DCA_HOST_STATUS, HOST_UPLOAD_PENDING);
+	ret = wait_ncp_status(wdev, NCP_DOWNLOAD_PENDING);
+	if (ret)
+		goto error;
+
+	start = ktime_get();
+	ret = upload_firmware(wdev, fw->data + header_size,
+			      fw->size - header_size);
+	if (ret)
+		goto error;
+	dev_dbg(wdev->dev, "firmware load after %lldus\n",
+		ktime_us_delta(ktime_get(), start));
+
+	sram_reg_write(wdev, WFX_DCA_HOST_STATUS, HOST_UPLOAD_COMPLETE);
+	ret = wait_ncp_status(wdev, NCP_AUTH_OK);
+	/* Legacy ROM support */
+	if (ret < 0)
+		ret = wait_ncp_status(wdev, NCP_PUB_KEY_RDY);
+	if (ret < 0)
+		goto error;
+	sram_reg_write(wdev, WFX_DCA_HOST_STATUS, HOST_OK_TO_JUMP);
+
+error:
+	kfree(buf);
+	if (fw)
+		release_firmware(fw);
+	if (ret)
+		print_boot_status(wdev);
+	return ret;
+}
+
+static int init_gpr(struct wfx_dev *wdev)
+{
+	int ret, i;
+	static const struct {
+		int index;
+		u32 value;
+	} gpr_init[] = {
+		{ 0x07, 0x208775 },
+		{ 0x08, 0x2EC020 },
+		{ 0x09, 0x3C3C3C },
+		{ 0x0B, 0x322C44 },
+		{ 0x0C, 0xA06497 },
+	};
+
+	for (i = 0; i < ARRAY_SIZE(gpr_init); i++) {
+		ret = igpr_reg_write(wdev, gpr_init[i].index,
+				     gpr_init[i].value);
+		if (ret < 0)
+			return ret;
+		dev_dbg(wdev->dev, "  index %02x: %08x\n",
+			gpr_init[i].index, gpr_init[i].value);
+	}
+	return 0;
+}
+
+int wfx_init_device(struct wfx_dev *wdev)
+{
+	int ret;
+	int hw_revision, hw_type;
+	int wakeup_timeout = 50; /* ms */
+	ktime_t now, start;
+	u32 reg;
+
+	reg = CFG_DIRECT_ACCESS_MODE | CFG_CPU_RESET | CFG_BYTE_ORDER_ABCD;
+	if (wdev->pdata.use_rising_clk)
+		reg |= CFG_CLK_RISE_EDGE;
+	ret = config_reg_write(wdev, reg);
+	if (ret < 0) {
+		dev_err(wdev->dev, "bus returned an error during first write access. Host configuration error?\n");
+		return -EIO;
+	}
+
+	ret = config_reg_read(wdev, &reg);
+	if (ret < 0) {
+		dev_err(wdev->dev, "bus returned an error during first read access. Bus configuration error?\n");
+		return -EIO;
+	}
+	if (reg == 0 || reg == ~0) {
+		dev_err(wdev->dev, "chip mute. Bus configuration error or chip wasn't reset?\n");
+		return -EIO;
+	}
+	dev_dbg(wdev->dev, "initial config register value: %08x\n", reg);
+
+	hw_revision = FIELD_GET(CFG_DEVICE_ID_MAJOR, reg);
+	if (hw_revision == 0) {
+		dev_err(wdev->dev, "bad hardware revision number: %d\n",
+			hw_revision);
+		return -ENODEV;
+	}
+	hw_type = FIELD_GET(CFG_DEVICE_ID_TYPE, reg);
+	if (hw_type == 1) {
+		dev_notice(wdev->dev, "development hardware detected\n");
+		wakeup_timeout = 2000;
+	}
+
+	ret = init_gpr(wdev);
+	if (ret < 0)
+		return ret;
+
+	ret = control_reg_write(wdev, CTRL_WLAN_WAKEUP);
+	if (ret < 0)
+		return -EIO;
+	start = ktime_get();
+	for (;;) {
+		ret = control_reg_read(wdev, &reg);
+		now = ktime_get();
+		if (reg & CTRL_WLAN_READY)
+			break;
+		if (ktime_after(now, ktime_add_ms(start, wakeup_timeout))) {
+			dev_err(wdev->dev, "chip didn't wake up. Chip wasn't reset?\n");
+			return -ETIMEDOUT;
+		}
+	}
+	dev_dbg(wdev->dev, "chip wake up after %lldus\n",
+		ktime_us_delta(now, start));
+
+	ret = config_reg_write_bits(wdev, CFG_CPU_RESET, 0);
+	if (ret < 0)
+		return ret;
+	ret = load_firmware_secure(wdev);
+	if (ret < 0)
+		return ret;
+	return config_reg_write_bits(wdev,
+				     CFG_DIRECT_ACCESS_MODE |
+				     CFG_IRQ_ENABLE_DATA |
+				     CFG_IRQ_ENABLE_WRDY,
+				     CFG_IRQ_ENABLE_DATA);
+}
diff --git a/drivers/net/wireless/silabs/wfx/fwio.h b/drivers/net/wireless/silabs/wfx/fwio.h
new file mode 100644
index 000000000000..eeea61210eca
--- /dev/null
+++ b/drivers/net/wireless/silabs/wfx/fwio.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Firmware loading.
+ *
+ * Copyright (c) 2017-2019, Silicon Laboratories, Inc.
+ * Copyright (c) 2010, ST-Ericsson
+ */
+#ifndef WFX_FWIO_H
+#define WFX_FWIO_H
+
+struct wfx_dev;
+
+int wfx_init_device(struct wfx_dev *wdev);
+
+#endif
-- 
2.30.2

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

  parent reply	other threads:[~2021-03-15 13:27 UTC|newest]

Thread overview: 86+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-15 13:24 [PATCH v5 00/24] wfx: get out from the staging area Jerome Pouiller
2021-03-15 13:24 ` Jerome Pouiller
2021-03-15 13:24 ` [PATCH v5 01/24] mmc: sdio: add SDIO IDs for Silabs WF200 chip Jerome Pouiller
2021-03-15 13:24   ` Jerome Pouiller
2021-03-15 13:24 ` [PATCH v5 02/24] dt-bindings: introduce silabs,wfx.yaml Jerome Pouiller
2021-03-15 13:24   ` Jerome Pouiller
2021-03-23 22:42   ` Rob Herring
2021-03-23 22:42     ` Rob Herring
2021-03-15 13:24 ` [PATCH v5 03/24] wfx: add Makefile/Kconfig Jerome Pouiller
2021-03-15 13:24   ` Jerome Pouiller
2021-03-15 15:11   ` Leon Romanovsky
2021-03-15 15:11     ` Leon Romanovsky
2021-03-15 16:21     ` Jérôme Pouiller
2021-03-15 16:21       ` Jérôme Pouiller
2021-03-17  4:25       ` Leon Romanovsky
2021-03-17  4:25         ` Leon Romanovsky
2021-03-15 13:24 ` [PATCH v5 04/24] wfx: add wfx.h Jerome Pouiller
2021-03-15 13:24   ` Jerome Pouiller
2021-03-15 13:24 ` [PATCH v5 05/24] wfx: add main.c/main.h Jerome Pouiller
2021-03-15 13:24   ` Jerome Pouiller
2021-03-15 13:24 ` [PATCH v5 06/24] wfx: add bus.h Jerome Pouiller
2021-03-15 13:24   ` Jerome Pouiller
2021-03-15 13:24 ` [PATCH v5 07/24] wfx: add bus_spi.c Jerome Pouiller
2021-03-15 13:24   ` Jerome Pouiller
2021-03-15 13:24 ` [PATCH v5 08/24] wfx: add bus_sdio.c Jerome Pouiller
2021-03-15 13:24   ` Jerome Pouiller
2021-03-22 12:20   ` Ulf Hansson
2021-03-22 12:20     ` Ulf Hansson
2021-03-22 17:14     ` Jérôme Pouiller
2021-03-22 17:14       ` Jérôme Pouiller
2021-03-23 14:11       ` Ulf Hansson
2021-03-23 14:11         ` Ulf Hansson
2021-03-23 17:53         ` Jérôme Pouiller
2021-03-23 17:53           ` Jérôme Pouiller
2021-03-23 19:12           ` Ulf Hansson
2021-03-23 19:12             ` Ulf Hansson
2021-04-07 12:00             ` Kalle Valo
2021-04-07 12:00               ` Kalle Valo
2021-04-12  8:22               ` Ulf Hansson
2021-04-12  8:22                 ` Ulf Hansson
2021-10-01 12:31                 ` Kalle Valo
2021-11-08 17:27                   ` Ulf Hansson
2021-03-15 13:24 ` [PATCH v5 09/24] wfx: add hwio.c/hwio.h Jerome Pouiller
2021-03-15 13:24   ` Jerome Pouiller
2021-03-15 13:24 ` Jerome Pouiller [this message]
2021-03-15 13:24   ` [PATCH v5 10/24] wfx: add fwio.c/fwio.h Jerome Pouiller
2021-03-15 13:24 ` [PATCH v5 11/24] wfx: add bh.c/bh.h Jerome Pouiller
2021-03-15 13:24   ` Jerome Pouiller
2021-03-15 13:24 ` [PATCH v5 12/24] wfx: add hif_api_*.h Jerome Pouiller
2021-03-15 13:24   ` Jerome Pouiller
2021-03-15 13:24 ` [PATCH v5 13/24] wfx: add hif_tx*.c/hif_tx*.h Jerome Pouiller
2021-03-15 13:24   ` Jerome Pouiller
2021-03-15 13:24 ` [PATCH v5 14/24] wfx: add key.c/key.h Jerome Pouiller
2021-03-15 13:24   ` Jerome Pouiller
2021-03-15 13:24 ` [PATCH v5 15/24] wfx: add hif_rx.c/hif_rx.h Jerome Pouiller
2021-03-15 13:24   ` Jerome Pouiller
2021-03-15 13:24 ` [PATCH v5 16/24] wfx: add data_rx.c/data_rx.h Jerome Pouiller
2021-03-15 13:24   ` Jerome Pouiller
2021-03-15 13:24 ` [PATCH v5 17/24] wfx: add queue.c/queue.h Jerome Pouiller
2021-03-15 13:24   ` Jerome Pouiller
2021-03-15 13:24 ` [PATCH v5 18/24] wfx: add data_tx.c/data_tx.h Jerome Pouiller
2021-03-15 13:24   ` Jerome Pouiller
2021-03-15 13:24 ` [PATCH v5 19/24] wfx: add sta.c/sta.h Jerome Pouiller
2021-03-15 13:24   ` Jerome Pouiller
2021-03-15 13:24 ` [PATCH v5 20/24] wfx: add scan.c/scan.h Jerome Pouiller
2021-03-15 13:24   ` Jerome Pouiller
2021-03-15 13:24 ` [PATCH v5 21/24] wfx: add debug.c/debug.h Jerome Pouiller
2021-03-15 13:24   ` Jerome Pouiller
2021-03-15 13:24 ` [PATCH v5 22/24] wfx: add traces.h Jerome Pouiller
2021-03-15 13:24   ` Jerome Pouiller
2021-03-15 13:25 ` [PATCH v5 23/24] wfx: remove from the staging area Jerome Pouiller
2021-03-15 13:25   ` Jerome Pouiller
2021-03-15 13:25 ` [PATCH v5 24/24] wfx: get out " Jerome Pouiller
2021-03-15 13:25   ` Jerome Pouiller
2021-03-15 21:09   ` kernel test robot
2021-03-15 21:09     ` kernel test robot
2021-03-15 21:09     ` kernel test robot
2021-03-15 21:09   ` [PATCH] wfx: fix irqf_oneshot.cocci warnings kernel test robot
2021-03-15 21:09     ` kernel test robot
2021-03-15 21:09     ` kernel test robot
2021-03-16  7:53     ` Jérôme Pouiller
2021-03-16  7:53       ` Jérôme Pouiller
2021-03-16  7:53       ` Jérôme Pouiller
2021-03-16  8:03       ` [kbuild-all] " Li, Philip
2021-03-16  8:03         ` Li, Philip
2021-03-16  8:03         ` [kbuild-all] " Li, Philip

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210315132501.441681-11-Jerome.Pouiller@silabs.com \
    --to=jerome.pouiller@silabs.com \
    --cc=davem@davemloft.net \
    --cc=devel@driverdev.osuosl.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pali@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.