* [PATCH v2 1/9] ARM: dts: stm32: Add Engicam i.Core STM32MP1 SoM
2021-03-15 17:32 [PATCH v2 0/9] stm32: Add Engicam STM32MP1 SoM Jagan Teki
@ 2021-03-15 17:32 ` Jagan Teki
2021-03-16 13:16 ` Patrick DELAUNAY
2021-03-15 17:32 ` [PATCH v2 2/9] ARM: dts: stm32: Add Engicam i.Core STM32MP1 1X4Gb DDR3 Jagan Teki
` (7 subsequent siblings)
8 siblings, 1 reply; 20+ messages in thread
From: Jagan Teki @ 2021-03-15 17:32 UTC (permalink / raw)
To: u-boot
i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.
General features:
- STM32MP157A
- Up to 1GB DDR3L
- 4GB eMMC
- 10/100 Ethernet
- USB 2.0 Host/OTG
- I2S
- MIPI DSI to LVDS
- rest of STM32MP157A features
i.Core STM32MP1 needs to mount on top of Engicam baseboards
for creating complete platform solutions.
Linux commit details:
commit <30f9a9da4ee1> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1
SoM")
Add support for it.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- collect Patrice r-b
- add linux dts commit
arch/arm/dts/stm32mp157a-icore-stm32mp1.dtsi | 196 +++++++++++++++++++
1 file changed, 196 insertions(+)
create mode 100644 arch/arm/dts/stm32mp157a-icore-stm32mp1.dtsi
diff --git a/arch/arm/dts/stm32mp157a-icore-stm32mp1.dtsi b/arch/arm/dts/stm32mp157a-icore-stm32mp1.dtsi
new file mode 100644
index 0000000000..01166ccacf
--- /dev/null
+++ b/arch/arm/dts/stm32mp157a-icore-stm32mp1.dtsi
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+/ {
+ compatible = "engicam,icore-stm32mp1", "st,stm32mp157";
+
+ memory at c0000000 {
+ device_type = "memory";
+ reg = <0xc0000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mcuram2: mcuram2 at 10000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10000000 0x40000>;
+ no-map;
+ };
+
+ vdev0vring0: vdev0vring0 at 10040000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10040000 0x1000>;
+ no-map;
+ };
+
+ vdev0vring1: vdev0vring1 at 10041000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10041000 0x1000>;
+ no-map;
+ };
+
+ vdev0buffer: vdev0buffer at 10042000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10042000 0x4000>;
+ no-map;
+ };
+
+ mcuram: mcuram at 30000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x30000000 0x40000>;
+ no-map;
+ };
+
+ retram: retram at 38000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x38000000 0x10000>;
+ no-map;
+ };
+ };
+
+ vddcore: regulator-vddcore {
+ compatible = "regulator-fixed";
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vdd: regulator-vdd {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_usb: regulator-vdd-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdda: regulator-vdda {
+ compatible = "regulator-fixed";
+ regulator-name = "vdda";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_ddr: regulator-vdd-ddr {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ vtt_ddr: regulator-vtt-ddr {
+ compatible = "regulator-fixed";
+ regulator-name = "vtt_ddr";
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <675000>;
+ regulator-always-on;
+ vin-supply = <&vdd>;
+ };
+
+ vref_ddr: regulator-vref-ddr {
+ compatible = "regulator-fixed";
+ regulator-name = "vref_ddr";
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <675000>;
+ regulator-always-on;
+ vin-supply = <&vdd>;
+ };
+
+ vdd_sd: regulator-vdd-sd {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ v3v3: regulator-v3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ v2v8: regulator-v2v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "v2v8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ vin-supply = <&v3v3>;
+ };
+
+ v1v8: regulator-v1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "v1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ vin-supply = <&v3v3>;
+ };
+};
+
+&dts {
+ status = "okay";
+};
+
+&i2c2 {
+ i2c-scl-falling-time-ns = <20>;
+ i2c-scl-rising-time-ns = <185>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c2_pins_a>;
+ pinctrl-1 = <&i2c2_sleep_pins_a>;
+ status = "okay";
+};
+
+&ipcc {
+ status = "okay";
+};
+
+&iwdg2{
+ timeout-sec = <32>;
+ status = "okay";
+};
+
+&m4_rproc{
+ memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+ <&vdev0vring1>, <&vdev0buffer>;
+ mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+ mbox-names = "vq0", "vq1", "shutdown";
+ interrupt-parent = <&exti>;
+ interrupts = <68 1>;
+ status = "okay";
+};
+
+&rng1 {
+ status = "okay";
+};
+
+&rtc{
+ status = "okay";
+};
+
+&vrefbuf {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ vdda-supply = <&vdd>;
+ status = "okay";
+};
--
2.25.1
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v2 1/9] ARM: dts: stm32: Add Engicam i.Core STM32MP1 SoM
2021-03-15 17:32 ` [PATCH v2 1/9] ARM: dts: stm32: Add Engicam i.Core " Jagan Teki
@ 2021-03-16 13:16 ` Patrick DELAUNAY
0 siblings, 0 replies; 20+ messages in thread
From: Patrick DELAUNAY @ 2021-03-16 13:16 UTC (permalink / raw)
To: u-boot
Hi Jagan
On 3/15/21 6:32 PM, Jagan Teki wrote:
> i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.
>
> General features:
> - STM32MP157A
> - Up to 1GB DDR3L
> - 4GB eMMC
> - 10/100 Ethernet
> - USB 2.0 Host/OTG
> - I2S
> - MIPI DSI to LVDS
> - rest of STM32MP157A features
>
> i.Core STM32MP1 needs to mount on top of Engicam baseboards
> for creating complete platform solutions.
>
> Linux commit details:
>
> commit <30f9a9da4ee1> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1
> SoM")
>
> Add support for it.
>
> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v2:
> - collect Patrice r-b
> - add linux dts commit
>
> arch/arm/dts/stm32mp157a-icore-stm32mp1.dtsi | 196 +++++++++++++++++++
> 1 file changed, 196 insertions(+)
> create mode 100644 arch/arm/dts/stm32mp157a-icore-stm32mp1.dtsi
>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Thanks
Patrick
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v2 2/9] ARM: dts: stm32: Add Engicam i.Core STM32MP1 1X4Gb DDR3
2021-03-15 17:32 [PATCH v2 0/9] stm32: Add Engicam STM32MP1 SoM Jagan Teki
2021-03-15 17:32 ` [PATCH v2 1/9] ARM: dts: stm32: Add Engicam i.Core " Jagan Teki
@ 2021-03-15 17:32 ` Jagan Teki
2021-03-16 13:19 ` Patrick DELAUNAY
2021-03-15 17:32 ` [PATCH v2 3/9] ARM: stm32: Imply SPL_SPI_LOAD Jagan Teki
` (6 subsequent siblings)
8 siblings, 1 reply; 20+ messages in thread
From: Jagan Teki @ 2021-03-15 17:32 UTC (permalink / raw)
To: u-boot
Engicam i.Core STM32MP1 SODIMM SoM has mounted 1x4Gb DDR3
which has 32bits width 528000Khz frequency.
Add DDR configuration via dtsi.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- collect Patrice r-b
.../stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi | 119 ++++++++++++++++++
1 file changed, 119 insertions(+)
create mode 100644 arch/arm/dts/stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi
diff --git a/arch/arm/dts/stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi
new file mode 100644
index 0000000000..1a45c6fc63
--- /dev/null
+++ b/arch/arm/dts/stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2015-2018, STMicroelectronics - All Rights Reserved
+ */
+
+/*
+ * File generated by STMicroelectronics STM32CubeMX DDR Tool for MPUs
+ * DDR type: DDR3 / DDR3L
+ * DDR width: 32bits
+ * DDR density: 4Gb
+ * System frequency: 528000Khz
+ * Relaxed Timing Mode: false
+ * Address mapping type: RBC
+ *
+ * Save Date: 2019.05.14, save Time: 11:25:16
+ */
+#define DDR_MEM_COMPATIBLE ddr3-icore-1066-888-bin-g-1x4gb-528mhz
+#define DDR_MEM_NAME "DDR3-DDR3L 32bits 528000Khz"
+#define DDR_MEM_SPEED 528000
+#define DDR_MEM_SIZE 0x20000000
+
+#define DDR_MSTR 0x00040401
+#define DDR_MRCTRL0 0x00000010
+#define DDR_MRCTRL1 0x00000000
+#define DDR_DERATEEN 0x00000000
+#define DDR_DERATEINT 0x00800000
+#define DDR_PWRCTL 0x00000000
+#define DDR_PWRTMG 0x00400010
+#define DDR_HWLPCTL 0x00000000
+#define DDR_RFSHCTL0 0x00210000
+#define DDR_RFSHCTL3 0x00000000
+#define DDR_RFSHTMG 0x0080008A
+#define DDR_CRCPARCTL0 0x00000000
+#define DDR_DRAMTMG0 0x121B2414
+#define DDR_DRAMTMG1 0x000A041B
+#define DDR_DRAMTMG2 0x0607080F
+#define DDR_DRAMTMG3 0x0050400C
+#define DDR_DRAMTMG4 0x07040607
+#define DDR_DRAMTMG5 0x06060403
+#define DDR_DRAMTMG6 0x02020002
+#define DDR_DRAMTMG7 0x00000202
+#define DDR_DRAMTMG8 0x00001005
+#define DDR_DRAMTMG14 0x000000A0
+#define DDR_ZQCTL0 0xC2000040
+#define DDR_DFITMG0 0x02050105
+#define DDR_DFITMG1 0x00000202
+#define DDR_DFILPCFG0 0x07000000
+#define DDR_DFIUPD0 0xC0400003
+#define DDR_DFIUPD1 0x00000000
+#define DDR_DFIUPD2 0x00000000
+#define DDR_DFIPHYMSTR 0x00000000
+#define DDR_ODTCFG 0x06000600
+#define DDR_ODTMAP 0x00000001
+#define DDR_SCHED 0x00000C01
+#define DDR_SCHED1 0x00000000
+#define DDR_PERFHPR1 0x01000001
+#define DDR_PERFLPR1 0x08000200
+#define DDR_PERFWR1 0x08000400
+#define DDR_DBG0 0x00000000
+#define DDR_DBG1 0x00000000
+#define DDR_DBGCMD 0x00000000
+#define DDR_POISONCFG 0x00000000
+#define DDR_PCCFG 0x00000010
+#define DDR_PCFGR_0 0x00010000
+#define DDR_PCFGW_0 0x00000000
+#define DDR_PCFGQOS0_0 0x02100C03
+#define DDR_PCFGQOS1_0 0x00800100
+#define DDR_PCFGWQOS0_0 0x01100C03
+#define DDR_PCFGWQOS1_0 0x01000200
+#define DDR_PCFGR_1 0x00010000
+#define DDR_PCFGW_1 0x00000000
+#define DDR_PCFGQOS0_1 0x02100C03
+#define DDR_PCFGQOS1_1 0x00800040
+#define DDR_PCFGWQOS0_1 0x01100C03
+#define DDR_PCFGWQOS1_1 0x01000200
+#define DDR_ADDRMAP1 0x00080808
+#define DDR_ADDRMAP2 0x00000000
+#define DDR_ADDRMAP3 0x00000000
+#define DDR_ADDRMAP4 0x00001F1F
+#define DDR_ADDRMAP5 0x07070707
+#define DDR_ADDRMAP6 0x0F0F0707
+#define DDR_ADDRMAP9 0x00000000
+#define DDR_ADDRMAP10 0x00000000
+#define DDR_ADDRMAP11 0x00000000
+#define DDR_PGCR 0x01442E02
+#define DDR_PTR0 0x0022A41B
+#define DDR_PTR1 0x047C0740
+#define DDR_PTR2 0x042D9C80
+#define DDR_ACIOCR 0x10400812
+#define DDR_DXCCR 0x00000C40
+#define DDR_DSGCR 0xF200001F
+#define DDR_DCR 0x0000000B
+#define DDR_DTPR0 0x36D477D0
+#define DDR_DTPR1 0x098A00D8
+#define DDR_DTPR2 0x10023600
+#define DDR_MR0 0x00000830
+#define DDR_MR1 0x00000000
+#define DDR_MR2 0x00000208
+#define DDR_MR3 0x00000000
+#define DDR_ODTCR 0x00010000
+#define DDR_ZQ0CR1 0x00000038
+#define DDR_DX0GCR 0x0000CE81
+#define DDR_DX0DLLCR 0x40000000
+#define DDR_DX0DQTR 0xFFFFFFFF
+#define DDR_DX0DQSTR 0x3DB02000
+#define DDR_DX1GCR 0x0000CE81
+#define DDR_DX1DLLCR 0x40000000
+#define DDR_DX1DQTR 0xFFFFFFFF
+#define DDR_DX1DQSTR 0x3DB02000
+#define DDR_DX2GCR 0x0000CE81
+#define DDR_DX2DLLCR 0x40000000
+#define DDR_DX2DQTR 0xFFFFFFFF
+#define DDR_DX2DQSTR 0x3DB02000
+#define DDR_DX3GCR 0x0000CE81
+#define DDR_DX3DLLCR 0x40000000
+#define DDR_DX3DQTR 0xFFFFFFFF
+#define DDR_DX3DQSTR 0x3DB02000
+
+#include "stm32mp15-ddr.dtsi"
--
2.25.1
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v2 2/9] ARM: dts: stm32: Add Engicam i.Core STM32MP1 1X4Gb DDR3
2021-03-15 17:32 ` [PATCH v2 2/9] ARM: dts: stm32: Add Engicam i.Core STM32MP1 1X4Gb DDR3 Jagan Teki
@ 2021-03-16 13:19 ` Patrick DELAUNAY
0 siblings, 0 replies; 20+ messages in thread
From: Patrick DELAUNAY @ 2021-03-16 13:19 UTC (permalink / raw)
To: u-boot
Hi Jagan
On 3/15/21 6:32 PM, Jagan Teki wrote:
> Engicam i.Core STM32MP1 SODIMM SoM has mounted 1x4Gb DDR3
> which has 32bits width 528000Khz frequency.
>
> Add DDR configuration via dtsi.
>
> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v2:
> - collect Patrice r-b
>
> .../stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi | 119 ++++++++++++++++++
> 1 file changed, 119 insertions(+)
> create mode 100644 arch/arm/dts/stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi
>
> diff --git a/arch/arm/dts/stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi
> new file mode 100644
> index 0000000000..1a45c6fc63
> --- /dev/null
> +++ b/arch/arm/dts/stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi
> @@ -0,0 +1,119 @@
> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
> +/*
> + * Copyright (C) 2015-2018, STMicroelectronics - All Rights Reserved
> + */
> +
> +/*
> + * File generated by STMicroelectronics STM32CubeMX DDR Tool for MPUs
> + * DDR type: DDR3 / DDR3L
> + * DDR width: 32bits
> + * DDR density: 4Gb
> + * System frequency: 528000Khz
> + * Relaxed Timing Mode: false
> + * Address mapping type: RBC
> + *
> + * Save Date: 2019.05.14, save Time: 11:25:16
> + */
> +#define DDR_MEM_COMPATIBLE ddr3-icore-1066-888-bin-g-1x4gb-528mhz
> +#define DDR_MEM_NAME "DDR3-DDR3L 32bits 528000Khz"
cosmetic: you can replace Khz by kHz
??????????????? (see commit "ARM: dts: stm32: Fix cosmetic typo: use
'kHz' as kilohertz")
This modification is also requested in CubeMX for generation file.
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Thanks
Patrick
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v2 3/9] ARM: stm32: Imply SPL_SPI_LOAD
2021-03-15 17:32 [PATCH v2 0/9] stm32: Add Engicam STM32MP1 SoM Jagan Teki
2021-03-15 17:32 ` [PATCH v2 1/9] ARM: dts: stm32: Add Engicam i.Core " Jagan Teki
2021-03-15 17:32 ` [PATCH v2 2/9] ARM: dts: stm32: Add Engicam i.Core STM32MP1 1X4Gb DDR3 Jagan Teki
@ 2021-03-15 17:32 ` Jagan Teki
2021-03-16 13:28 ` Patrick DELAUNAY
2021-03-15 17:32 ` [PATCH v2 4/9] board: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit Jagan Teki
` (5 subsequent siblings)
8 siblings, 1 reply; 20+ messages in thread
From: Jagan Teki @ 2021-03-15 17:32 UTC (permalink / raw)
To: u-boot
SPI Load isn't mandatory for STM32 builds.
Let's imply instead of select it to get rid of build
issues for non-SPI defconfigs.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- collect Patrice r-b
arch/arm/mach-stm32mp/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
index f538d7cb83..79ffd5191d 100644
--- a/arch/arm/mach-stm32mp/Kconfig
+++ b/arch/arm/mach-stm32mp/Kconfig
@@ -16,13 +16,13 @@ config SPL
select SPL_REGMAP
select SPL_DM_RESET
select SPL_SERIAL_SUPPORT
- select SPL_SPI_LOAD
select SPL_SYSCON
select SPL_WATCHDOG_SUPPORT if WATCHDOG
imply BOOTSTAGE_STASH if SPL_BOOTSTAGE
imply SPL_BOOTSTAGE if BOOTSTAGE
imply SPL_DISPLAY_PRINT
imply SPL_LIBDISK_SUPPORT
+ imply SPL_SPI_LOAD
config SYS_SOC
default "stm32mp"
--
2.25.1
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v2 3/9] ARM: stm32: Imply SPL_SPI_LOAD
2021-03-15 17:32 ` [PATCH v2 3/9] ARM: stm32: Imply SPL_SPI_LOAD Jagan Teki
@ 2021-03-16 13:28 ` Patrick DELAUNAY
0 siblings, 0 replies; 20+ messages in thread
From: Patrick DELAUNAY @ 2021-03-16 13:28 UTC (permalink / raw)
To: u-boot
On 3/15/21 6:32 PM, Jagan Teki wrote:
> SPI Load isn't mandatory for STM32 builds.
>
> Let's imply instead of select it to get rid of build
> issues for non-SPI defconfigs.
>
> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v2:
> - collect Patrice r-b
>
> arch/arm/mach-stm32mp/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
> index f538d7cb83..79ffd5191d 100644
> --- a/arch/arm/mach-stm32mp/Kconfig
> +++ b/arch/arm/mach-stm32mp/Kconfig
> @@ -16,13 +16,13 @@ config SPL
> select SPL_REGMAP
> select SPL_DM_RESET
> select SPL_SERIAL_SUPPORT
> - select SPL_SPI_LOAD
> select SPL_SYSCON
> select SPL_WATCHDOG_SUPPORT if WATCHDOG
> imply BOOTSTAGE_STASH if SPL_BOOTSTAGE
> imply SPL_BOOTSTAGE if BOOTSTAGE
> imply SPL_DISPLAY_PRINT
> imply SPL_LIBDISK_SUPPORT
> + imply SPL_SPI_LOAD
cosmetic: you can add dependency ?
imply SPL_SPI_LOAD if SPL_SPI_SUPPORT
>
> config SYS_SOC
> default "stm32mp"
Anyway
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Thanks
Patrick
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v2 4/9] board: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit
2021-03-15 17:32 [PATCH v2 0/9] stm32: Add Engicam STM32MP1 SoM Jagan Teki
` (2 preceding siblings ...)
2021-03-15 17:32 ` [PATCH v2 3/9] ARM: stm32: Imply SPL_SPI_LOAD Jagan Teki
@ 2021-03-15 17:32 ` Jagan Teki
2021-03-16 13:33 ` Patrick DELAUNAY
2021-03-15 17:32 ` [PATCH v2 5/9] board: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 Jagan Teki
` (4 subsequent siblings)
8 siblings, 1 reply; 20+ messages in thread
From: Jagan Teki @ 2021-03-15 17:32 UTC (permalink / raw)
To: u-boot
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluation Board.
Genaral features:
- LCD 7" C.Touch
- microSD slot
- Ethernet 1Gb
- Wifi/BT
- 2x LVDS Full HD interfaces
- 3x USB 2.0
- 1x USB 3.0
- HDMI Out
- Mini PCIe
- MIPI CSI
- 2x CAN
- Audio Out
i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.
i.Core STM32MP1 needs to mount on top of this Evaluation board for
creating complete i.Core STM32MP1 EDIMM2.2 Starter Kit.
Linux dts commit details:
commit <adc0496104b6> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1
EDIMM2.2 Starter Kit")
Add support for it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- collect Patrice r-b
- add linux dts commit
- drop CONFIG_BOARD_EARLY_INIT_F
arch/arm/dts/Makefile | 1 +
...mp157a-icore-stm32mp1-edimm2.2-u-boot.dtsi | 51 ++++++
.../stm32mp157a-icore-stm32mp1-edimm2.2.dts | 47 ++++++
.../stm32mp157a-icore-stm32mp1-u-boot.dtsi | 146 ++++++++++++++++++
arch/arm/mach-stm32mp/Kconfig | 20 +++
board/engicam/stm32mp1/Kconfig | 12 ++
board/engicam/stm32mp1/MAINTAINERS | 6 +
board/engicam/stm32mp1/Makefile | 10 ++
board/engicam/stm32mp1/spl.c | 48 ++++++
board/engicam/stm32mp1/stm32mp1.c | 125 +++++++++++++++
...tm32mp15-icore-stm32mp1-edimm2.2_defconfig | 79 ++++++++++
11 files changed, 545 insertions(+)
create mode 100644 arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2-u-boot.dtsi
create mode 100644 arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
create mode 100644 arch/arm/dts/stm32mp157a-icore-stm32mp1-u-boot.dtsi
create mode 100644 board/engicam/stm32mp1/Kconfig
create mode 100644 board/engicam/stm32mp1/MAINTAINERS
create mode 100644 board/engicam/stm32mp1/Makefile
create mode 100644 board/engicam/stm32mp1/spl.c
create mode 100644 board/engicam/stm32mp1/stm32mp1.c
create mode 100644 configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 17cf936a1f..9d13045f21 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -990,6 +990,7 @@ dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
dtb-$(CONFIG_STM32MP15x) += \
stm32mp157a-dk1.dtb \
stm32mp157a-avenger96.dtb \
+ stm32mp157a-icore-stm32mp1-edimm2.2.dtb \
stm32mp157c-dk2.dtb \
stm32mp157c-ed1.dtb \
stm32mp157c-ev1.dtb \
diff --git a/arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2-u-boot.dtsi b/arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2-u-boot.dtsi
new file mode 100644
index 0000000000..96fe461235
--- /dev/null
+++ b/arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2-u-boot.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Amarula Solutions(India)
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "stm32mp157a-icore-stm32mp1-u-boot.dtsi"
+
+/{
+ aliases {
+ mmc0 = &sdmmc1;
+ };
+
+ chosen {
+ stdout-path = &uart4;
+ };
+};
+
+&sdmmc1 {
+ u-boot,dm-pre-reloc;
+};
+
+&sdmmc1_b4_pins_a {
+ u-boot,dm-pre-reloc;
+
+ pins1 {
+ u-boot,dm-pre-reloc;
+ };
+
+ pins2 {
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&uart4 {
+ u-boot,dm-pre-reloc;
+};
+
+&uart4_pins_a {
+ u-boot,dm-pre-reloc;
+
+ pins1 {
+ u-boot,dm-pre-reloc;
+ };
+
+ pins2 {
+ u-boot,dm-pre-reloc;
+ bias-pull-up;
+ };
+};
diff --git a/arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts b/arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
new file mode 100644
index 0000000000..ec9f1d1cd5
--- /dev/null
+++ b/arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+/dts-v1/;
+#include "stm32mp157.dtsi"
+#include "stm32mp157a-icore-stm32mp1.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit";
+ compatible = "engicam,icore-stm32mp1-edimm2.2",
+ "engicam,icore-stm32mp1", "st,stm32mp157";
+
+ aliases {
+ serial0 = &uart4;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&sdmmc1 {
+ bus-width = <4>;
+ disable-wp;
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc1_b4_pins_a>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+ st,neg-edge;
+ vmmc-supply = <&v3v3>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default", "sleep", "idle";
+ pinctrl-0 = <&uart4_pins_a>;
+ pinctrl-1 = <&uart4_sleep_pins_a>;
+ pinctrl-2 = <&uart4_idle_pins_a>;
+ status = "okay";
+};
diff --git a/arch/arm/dts/stm32mp157a-icore-stm32mp1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-icore-stm32mp1-u-boot.dtsi
new file mode 100644
index 0000000000..d62c24d4ce
--- /dev/null
+++ b/arch/arm/dts/stm32mp157a-icore-stm32mp1-u-boot.dtsi
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Amarula Solutions(India)
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+#include "stm32mp15-u-boot.dtsi"
+#include "stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi"
+
+&vddcore {
+ u-boot,dm-pre-reloc;
+};
+
+&vdd {
+ u-boot,dm-pre-reloc;
+};
+
+&vdd_usb {
+ u-boot,dm-pre-reloc;
+};
+
+&vdda {
+ u-boot,dm-pre-reloc;
+};
+
+&vdd_ddr {
+ u-boot,dm-pre-reloc;
+};
+
+&vtt_ddr {
+ u-boot,dm-pre-reloc;
+};
+
+&vref_ddr {
+ u-boot,dm-pre-reloc;
+};
+
+&vdd_sd {
+ u-boot,dm-pre-reloc;
+};
+
+&v3v3 {
+ u-boot,dm-pre-reloc;
+};
+
+&v2v8 {
+ u-boot,dm-pre-reloc;
+};
+
+&v1v8 {
+ u-boot,dm-pre-reloc;
+};
+
+&rcc {
+ st,clksrc = <
+ CLK_MPU_PLL1P
+ CLK_AXI_PLL2P
+ CLK_MCU_PLL3P
+ CLK_PLL12_HSE
+ CLK_PLL3_HSE
+ CLK_PLL4_HSE
+ CLK_RTC_LSE
+ CLK_MCO1_DISABLED
+ CLK_MCO2_DISABLED
+ >;
+
+ st,clkdiv = <
+ 1 /*MPU*/
+ 0 /*AXI*/
+ 0 /*MCU*/
+ 1 /*APB1*/
+ 1 /*APB2*/
+ 1 /*APB3*/
+ 1 /*APB4*/
+ 2 /*APB5*/
+ 23 /*RTC*/
+ 0 /*MCO1*/
+ 0 /*MCO2*/
+ >;
+
+ st,pkcs = <
+ CLK_CKPER_HSE
+ CLK_FMC_ACLK
+ CLK_QSPI_ACLK
+ CLK_ETH_DISABLED
+ CLK_SDMMC12_PLL4P
+ CLK_DSI_DSIPLL
+ CLK_STGEN_HSE
+ CLK_USBPHY_HSE
+ CLK_SPI2S1_PLL3Q
+ CLK_SPI2S23_PLL3Q
+ CLK_SPI45_HSI
+ CLK_SPI6_HSI
+ CLK_I2C46_HSI
+ CLK_SDMMC3_PLL4P
+ CLK_USBO_USBPHY
+ CLK_ADC_CKPER
+ CLK_CEC_LSE
+ CLK_I2C12_HSI
+ CLK_I2C35_HSI
+ CLK_UART1_HSI
+ CLK_UART24_HSI
+ CLK_UART35_HSI
+ CLK_UART6_HSI
+ CLK_UART78_HSI
+ CLK_SPDIF_PLL4P
+ CLK_FDCAN_PLL4R
+ CLK_SAI1_PLL3Q
+ CLK_SAI2_PLL3Q
+ CLK_SAI3_PLL3Q
+ CLK_SAI4_PLL3Q
+ CLK_RNG1_LSI
+ CLK_RNG2_LSI
+ CLK_LPTIM1_PCLK1
+ CLK_LPTIM23_PCLK3
+ CLK_LPTIM45_LSE
+ >;
+
+ /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
+ pll2: st,pll at 1 {
+ compatible = "st,stm32mp1-pll";
+ reg = <1>;
+ cfg = < 2 65 1 0 0 PQR(1,1,1) >;
+ frac = < 0x1400 >;
+ u-boot,dm-pre-reloc;
+ };
+
+ /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
+ pll3: st,pll at 2 {
+ compatible = "st,stm32mp1-pll";
+ reg = <2>;
+ cfg = < 1 33 1 16 36 PQR(1,1,1) >;
+ frac = < 0x1a04 >;
+ u-boot,dm-pre-reloc;
+ };
+
+ /* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
+ pll4: st,pll at 3 {
+ compatible = "st,stm32mp1-pll";
+ reg = <3>;
+ cfg = < 3 98 5 7 7 PQR(1,1,1) >;
+ u-boot,dm-pre-reloc;
+ };
+};
diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
index 79ffd5191d..5a2123063a 100644
--- a/arch/arm/mach-stm32mp/Kconfig
+++ b/arch/arm/mach-stm32mp/Kconfig
@@ -77,6 +77,25 @@ config TARGET_ST_STM32MP15x
Evalulation board (EV1) or Discovery board (DK1 and DK2).
The difference between board are managed with devicetree
+config TARGET_ICORE_STM32MP1
+ bool "Engicam i.Core STM32MP1 SOM"
+ select STM32MP15x
+ imply BOOTCOUNT_LIMIT
+ imply BOOTSTAGE
+ imply CMD_BOOTCOUNT
+ imply CMD_BOOTSTAGE
+ imply CMD_CLS if CMD_BMP
+ imply DISABLE_CONSOLE
+ imply PRE_CONSOLE_BUFFER
+ imply SILENT_CONSOLE
+ help
+ i.Core STM32MP1 is an EDIMM SOM based on STM32MP157A.
+
+ i.Core STM32MP1 EDIMM2.2:
+ * EDIMM2.2 is a Form Factor Capacitive Evaluation Board.
+ * i.Core STM32MP1 needs to mount on top of EDIMM2.2 for
+ creating complete i.Core STM32MP1 EDIMM2.2 Starter Kit.
+
config TARGET_DH_STM32MP1_PDK2
bool "DH STM32MP1 PDK2"
select STM32MP15x
@@ -177,6 +196,7 @@ config DEBUG_UART_CLOCK
default 64000000
endif
+source "board/engicam/stm32mp1/Kconfig"
source "board/st/stm32mp1/Kconfig"
source "board/dhelectronics/dh_stm32mp1/Kconfig"
diff --git a/board/engicam/stm32mp1/Kconfig b/board/engicam/stm32mp1/Kconfig
new file mode 100644
index 0000000000..e7bccc09fb
--- /dev/null
+++ b/board/engicam/stm32mp1/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_ICORE_STM32MP1
+
+config SYS_BOARD
+ default "stm32mp1"
+
+config SYS_VENDOR
+ default "engicam"
+
+config SYS_CONFIG_NAME
+ default "stm32mp1"
+
+endif
diff --git a/board/engicam/stm32mp1/MAINTAINERS b/board/engicam/stm32mp1/MAINTAINERS
new file mode 100644
index 0000000000..3230a7a6e8
--- /dev/null
+++ b/board/engicam/stm32mp1/MAINTAINERS
@@ -0,0 +1,6 @@
+i.Core-STM32MP1-EDIMM2.2
+M: Jagan Teki <jagan@amarulasolutions.com>
+M: Matteo Lisi <matteo.lisi@engicam.com>
+S: Maintained
+F: board/engicam/stm32mp1
+F: configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig
diff --git a/board/engicam/stm32mp1/Makefile b/board/engicam/stm32mp1/Makefile
new file mode 100644
index 0000000000..65560df290
--- /dev/null
+++ b/board/engicam/stm32mp1/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+#
+# Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+#
+
+ifdef CONFIG_SPL_BUILD
+obj-y += spl.o
+else
+obj-y += stm32mp1.o
+endif
diff --git a/board/engicam/stm32mp1/spl.c b/board/engicam/stm32mp1/spl.c
new file mode 100644
index 0000000000..79adb5f529
--- /dev/null
+++ b/board/engicam/stm32mp1/spl.c
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ * Copyright (C) 2020 Engicam S.r.l.
+ * Copyright (C) 2020 Amarula Solutions(India)
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+/* board early initialisation in board_f: need to use global variable */
+static u32 opp_voltage_mv __section(".data");
+
+void board_vddcore_init(u32 voltage_mv)
+{
+ if (IS_ENABLED(CONFIG_PMIC_STPMIC1) && CONFIG_IS_ENABLED(POWER_SUPPORT))
+ opp_voltage_mv = voltage_mv;
+}
+
+int board_early_init_f(void)
+{
+ return 0;
+}
+
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
+void board_debug_uart_init(void)
+{
+#if (CONFIG_DEBUG_UART_BASE == STM32_UART4_BASE)
+
+#define RCC_MP_APB1ENSETR (STM32_RCC_BASE + 0x0A00)
+#define RCC_MP_AHB4ENSETR (STM32_RCC_BASE + 0x0A28)
+
+ /* UART4 clock enable */
+ setbits_le32(RCC_MP_APB1ENSETR, BIT(16));
+
+#define GPIOG_BASE 0x50008000
+ /* GPIOG clock enable */
+ writel(BIT(6), RCC_MP_AHB4ENSETR);
+ /* GPIO configuration for ST boards: Uart4 TX = G11 */
+ writel(0xffbfffff, GPIOG_BASE + 0x00);
+ writel(0x00006000, GPIOG_BASE + 0x24);
+#else
+
+#error("CONFIG_DEBUG_UART_BASE: not supported value")
+
+#endif
+}
+#endif
diff --git a/board/engicam/stm32mp1/stm32mp1.c b/board/engicam/stm32mp1/stm32mp1.c
new file mode 100644
index 0000000000..8bf9c9c67d
--- /dev/null
+++ b/board/engicam/stm32mp1/stm32mp1.c
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ * Copyright (C) 2020 Engicam S.r.l.
+ * Copyright (C) 2020 Amarula Solutions(India)
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include <common.h>
+#include <env.h>
+#include <env_internal.h>
+#include <syscon.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+#include <power/regulator.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+ char *mode;
+ const char *fdt_compat;
+ int fdt_compat_len;
+
+ if (IS_ENABLED(CONFIG_TFABOOT))
+ mode = "trusted";
+ else
+ mode = "basic";
+
+ printf("Board: stm32mp1 in %s mode", mode);
+ fdt_compat = fdt_getprop(gd->fdt_blob, 0, "compatible",
+ &fdt_compat_len);
+ if (fdt_compat && fdt_compat_len)
+ printf(" (%s)", fdt_compat);
+ puts("\n");
+
+ return 0;
+}
+
+/* board dependent setup after realloc */
+int board_init(void)
+{
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = STM32_DDR_BASE + 0x100;
+
+ if (IS_ENABLED(CONFIG_DM_REGULATOR))
+ regulators_enable_boot_on(_DEBUG);
+
+ return 0;
+}
+
+int board_late_init(void)
+{
+ return 0;
+}
+
+enum env_location env_get_location(enum env_operation op, int prio)
+{
+ u32 bootmode = get_bootmode();
+
+ if (prio)
+ return ENVL_UNKNOWN;
+
+ switch (bootmode & TAMP_BOOT_DEVICE_MASK) {
+ case BOOT_FLASH_SD:
+ case BOOT_FLASH_EMMC:
+ if (CONFIG_IS_ENABLED(ENV_IS_IN_MMC))
+ return ENVL_MMC;
+ else if (CONFIG_IS_ENABLED(ENV_IS_IN_EXT4))
+ return ENVL_EXT4;
+ else
+ return ENVL_NOWHERE;
+
+ case BOOT_FLASH_NAND:
+ case BOOT_FLASH_SPINAND:
+ if (CONFIG_IS_ENABLED(ENV_IS_IN_UBI))
+ return ENVL_UBI;
+ else
+ return ENVL_NOWHERE;
+
+ case BOOT_FLASH_NOR:
+ if (CONFIG_IS_ENABLED(ENV_IS_IN_SPI_FLASH))
+ return ENVL_SPI_FLASH;
+ else
+ return ENVL_NOWHERE;
+
+ default:
+ return ENVL_NOWHERE;
+ }
+}
+
+const char *env_ext4_get_intf(void)
+{
+ u32 bootmode = get_bootmode();
+
+ switch (bootmode & TAMP_BOOT_DEVICE_MASK) {
+ case BOOT_FLASH_SD:
+ case BOOT_FLASH_EMMC:
+ return "mmc";
+ default:
+ return "";
+ }
+}
+
+const char *env_ext4_get_dev_part(void)
+{
+ static char *const dev_part[] = {"0:auto", "1:auto", "2:auto"};
+ u32 bootmode = get_bootmode();
+
+ return dev_part[(bootmode & TAMP_BOOT_INSTANCE_MASK) - 1];
+}
+
+int mmc_get_env_dev(void)
+{
+ u32 bootmode = get_bootmode();
+
+ return (bootmode & TAMP_BOOT_INSTANCE_MASK) - 1;
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+ return 0;
+}
+#endif
diff --git a/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig b/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig
new file mode 100644
index 0000000000..2bfaf65d3c
--- /dev/null
+++ b/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig
@@ -0,0 +1,79 @@
+CONFIG_ARM=y
+CONFIG_ARCH_STM32MP=y
+CONFIG_SYS_MALLOC_F_LEN=0x3000
+CONFIG_SYS_MEMTEST_START=0xc0000000
+CONFIG_SYS_MEMTEST_END=0xc4000000
+CONFIG_ENV_OFFSET=0x280000
+CONFIG_SPL_TEXT_BASE=0x2FFC2500
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL=y
+CONFIG_TARGET_ICORE_STM32MP1=y
+CONFIG_ENV_OFFSET_REDUND=0x2C0000
+# CONFIG_ARMV7_VIRT is not set
+CONFIG_DEFAULT_DEVICE_TREE="stm32mp157a-icore-stm32mp1-edimm2.2"
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_FIT=y
+CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SYS_PROMPT="STM32MP> "
+CONFIG_CMD_ADTIMG=y
+CONFIG_CMD_ERASEENV=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_ADC=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_REMOTEPROC=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_TIMER=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-names interrupts-extended interrupt-controller \\\#interrupt-cells interrupt-parent dmas dma-names assigned-clocks assigned-clock-rates assigned-clock-parents hwlocks"
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+# CONFIG_SPL_ENV_IS_NOWHERE is not set
+CONFIG_DM_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_STM32=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_STM32F7=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_DM_MAILBOX=y
+CONFIG_STM32_IPCC=y
+CONFIG_STM32_FMC2_EBI=y
+CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_STM32_SDMMC2=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_PHY=y
+CONFIG_PINCONF=y
+# CONFIG_SPL_PINCTRL_FULL is not set
+CONFIG_PINCTRL_STMFX=y
+CONFIG_DM_PMIC=y
+# CONFIG_SPL_PMIC_CHILDREN is not set
+CONFIG_PMIC_STPMIC1=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_REMOTEPROC_STM32_COPRO=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_STM32=y
+CONFIG_SERIAL_RX_BUFFER=y
+CONFIG_WDT=y
+CONFIG_WDT_STM32MP=y
+CONFIG_LZO=y
+CONFIG_ERRNO_STR=y
--
2.25.1
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v2 4/9] board: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit
2021-03-15 17:32 ` [PATCH v2 4/9] board: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit Jagan Teki
@ 2021-03-16 13:33 ` Patrick DELAUNAY
0 siblings, 0 replies; 20+ messages in thread
From: Patrick DELAUNAY @ 2021-03-16 13:33 UTC (permalink / raw)
To: u-boot
On 3/15/21 6:32 PM, Jagan Teki wrote:
> Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
> Evaluation Board.
>
> Genaral features:
> - LCD 7" C.Touch
> - microSD slot
> - Ethernet 1Gb
> - Wifi/BT
> - 2x LVDS Full HD interfaces
> - 3x USB 2.0
> - 1x USB 3.0
> - HDMI Out
> - Mini PCIe
> - MIPI CSI
> - 2x CAN
> - Audio Out
>
> i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.
>
> i.Core STM32MP1 needs to mount on top of this Evaluation board for
> creating complete i.Core STM32MP1 EDIMM2.2 Starter Kit.
>
> Linux dts commit details:
>
> commit <adc0496104b6> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1
> EDIMM2.2 Starter Kit")
>
> Add support for it.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v2:
> - collect Patrice r-b
> - add linux dts commit
> - drop CONFIG_BOARD_EARLY_INIT_F
>
> arch/arm/dts/Makefile | 1 +
> ...mp157a-icore-stm32mp1-edimm2.2-u-boot.dtsi | 51 ++++++
> .../stm32mp157a-icore-stm32mp1-edimm2.2.dts | 47 ++++++
> .../stm32mp157a-icore-stm32mp1-u-boot.dtsi | 146 ++++++++++++++++++
> arch/arm/mach-stm32mp/Kconfig | 20 +++
> board/engicam/stm32mp1/Kconfig | 12 ++
> board/engicam/stm32mp1/MAINTAINERS | 6 +
> board/engicam/stm32mp1/Makefile | 10 ++
> board/engicam/stm32mp1/spl.c | 48 ++++++
> board/engicam/stm32mp1/stm32mp1.c | 125 +++++++++++++++
> ...tm32mp15-icore-stm32mp1-edimm2.2_defconfig | 79 ++++++++++
> 11 files changed, 545 insertions(+)
> create mode 100644 arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2-u-boot.dtsi
> create mode 100644 arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
> create mode 100644 arch/arm/dts/stm32mp157a-icore-stm32mp1-u-boot.dtsi
> create mode 100644 board/engicam/stm32mp1/Kconfig
> create mode 100644 board/engicam/stm32mp1/MAINTAINERS
> create mode 100644 board/engicam/stm32mp1/Makefile
> create mode 100644 board/engicam/stm32mp1/spl.c
> create mode 100644 board/engicam/stm32mp1/stm32mp1.c
> create mode 100644 configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig
>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Thanks
Patrick
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v2 5/9] board: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0
2021-03-15 17:32 [PATCH v2 0/9] stm32: Add Engicam STM32MP1 SoM Jagan Teki
` (3 preceding siblings ...)
2021-03-15 17:32 ` [PATCH v2 4/9] board: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit Jagan Teki
@ 2021-03-15 17:32 ` Jagan Teki
2021-03-16 13:39 ` Patrick DELAUNAY
2021-03-15 17:32 ` [PATCH v2 6/9] ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 Micro SoM Jagan Teki
` (3 subsequent siblings)
8 siblings, 1 reply; 20+ messages in thread
From: Jagan Teki @ 2021-03-15 17:32 UTC (permalink / raw)
To: u-boot
Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
board.
Genaral features:
- Ethernet 10/100
- Wifi/BT
- USB Type A/OTG
- Audio Out
- CAN
- LVDS panel connector
i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.
i.Core STM32MP1 needs to mount on top of this Carrier board for
creating complete i.Core STM32MP1 C.TOUCH 2.0 board.
Linux dts commit details:
commit <6ca2898df59f> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1
C.TOUCH 2.0")
Add support for it.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- collect Patrice r-b
- add linux dts commit
- drop CONFIG_BOARD_EARLY_INIT_F
arch/arm/dts/Makefile | 1 +
...2mp157a-icore-stm32mp1-ctouch2-u-boot.dtsi | 51 ++++++++++++
.../stm32mp157a-icore-stm32mp1-ctouch2.dts | 47 +++++++++++
arch/arm/mach-stm32mp/Kconfig | 5 ++
board/engicam/stm32mp1/MAINTAINERS | 6 ++
...stm32mp15-icore-stm32mp1-ctouch2_defconfig | 79 +++++++++++++++++++
6 files changed, 189 insertions(+)
create mode 100644 arch/arm/dts/stm32mp157a-icore-stm32mp1-ctouch2-u-boot.dtsi
create mode 100644 arch/arm/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts
create mode 100644 configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 9d13045f21..ce4521b891 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -990,6 +990,7 @@ dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
dtb-$(CONFIG_STM32MP15x) += \
stm32mp157a-dk1.dtb \
stm32mp157a-avenger96.dtb \
+ stm32mp157a-icore-stm32mp1-ctouch2.dtb \
stm32mp157a-icore-stm32mp1-edimm2.2.dtb \
stm32mp157c-dk2.dtb \
stm32mp157c-ed1.dtb \
diff --git a/arch/arm/dts/stm32mp157a-icore-stm32mp1-ctouch2-u-boot.dtsi b/arch/arm/dts/stm32mp157a-icore-stm32mp1-ctouch2-u-boot.dtsi
new file mode 100644
index 0000000000..96fe461235
--- /dev/null
+++ b/arch/arm/dts/stm32mp157a-icore-stm32mp1-ctouch2-u-boot.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Amarula Solutions(India)
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "stm32mp157a-icore-stm32mp1-u-boot.dtsi"
+
+/{
+ aliases {
+ mmc0 = &sdmmc1;
+ };
+
+ chosen {
+ stdout-path = &uart4;
+ };
+};
+
+&sdmmc1 {
+ u-boot,dm-pre-reloc;
+};
+
+&sdmmc1_b4_pins_a {
+ u-boot,dm-pre-reloc;
+
+ pins1 {
+ u-boot,dm-pre-reloc;
+ };
+
+ pins2 {
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&uart4 {
+ u-boot,dm-pre-reloc;
+};
+
+&uart4_pins_a {
+ u-boot,dm-pre-reloc;
+
+ pins1 {
+ u-boot,dm-pre-reloc;
+ };
+
+ pins2 {
+ u-boot,dm-pre-reloc;
+ bias-pull-up;
+ };
+};
diff --git a/arch/arm/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts b/arch/arm/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts
new file mode 100644
index 0000000000..d3058a036c
--- /dev/null
+++ b/arch/arm/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+/dts-v1/;
+#include "stm32mp157.dtsi"
+#include "stm32mp157a-icore-stm32mp1.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Engicam i.Core STM32MP1 C.TOUCH 2.0";
+ compatible = "engicam,icore-stm32mp1-ctouch2",
+ "engicam,icore-stm32mp1", "st,stm32mp157";
+
+ aliases {
+ serial0 = &uart4;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&sdmmc1 {
+ bus-width = <4>;
+ disable-wp;
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc1_b4_pins_a>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+ st,neg-edge;
+ vmmc-supply = <&v3v3>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default", "sleep", "idle";
+ pinctrl-0 = <&uart4_pins_a>;
+ pinctrl-1 = <&uart4_sleep_pins_a>;
+ pinctrl-2 = <&uart4_idle_pins_a>;
+ status = "okay";
+};
diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
index 5a2123063a..15c832b16b 100644
--- a/arch/arm/mach-stm32mp/Kconfig
+++ b/arch/arm/mach-stm32mp/Kconfig
@@ -96,6 +96,11 @@ config TARGET_ICORE_STM32MP1
* i.Core STM32MP1 needs to mount on top of EDIMM2.2 for
creating complete i.Core STM32MP1 EDIMM2.2 Starter Kit.
+ i.Core STM32MP1 C.TOUCH 2.0
+ * C.TOUCH 2.0 is a general purpose Carrier board.
+ * i.Core STM32MP1 needs to mount on top of this Carrier board
+ for creating complete i.Core STM32MP1 C.TOUCH 2.0 board.
+
config TARGET_DH_STM32MP1_PDK2
bool "DH STM32MP1 PDK2"
select STM32MP15x
diff --git a/board/engicam/stm32mp1/MAINTAINERS b/board/engicam/stm32mp1/MAINTAINERS
index 3230a7a6e8..62c6925c8d 100644
--- a/board/engicam/stm32mp1/MAINTAINERS
+++ b/board/engicam/stm32mp1/MAINTAINERS
@@ -1,3 +1,9 @@
+i.Core-STM32MP1-CTOUCH2.0
+M: Jagan Teki <jagan@amarulasolutions.com>
+M: Matteo Lisi <matteo.lisi@engicam.com>
+S: Maintained
+F: configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig
+
i.Core-STM32MP1-EDIMM2.2
M: Jagan Teki <jagan@amarulasolutions.com>
M: Matteo Lisi <matteo.lisi@engicam.com>
diff --git a/configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig b/configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig
new file mode 100644
index 0000000000..55f9fb9427
--- /dev/null
+++ b/configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig
@@ -0,0 +1,79 @@
+CONFIG_ARM=y
+CONFIG_ARCH_STM32MP=y
+CONFIG_SYS_MALLOC_F_LEN=0x3000
+CONFIG_SYS_MEMTEST_START=0xc0000000
+CONFIG_SYS_MEMTEST_END=0xc4000000
+CONFIG_ENV_OFFSET=0x280000
+CONFIG_SPL_TEXT_BASE=0x2FFC2500
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL=y
+CONFIG_TARGET_ICORE_STM32MP1=y
+CONFIG_ENV_OFFSET_REDUND=0x2C0000
+# CONFIG_ARMV7_VIRT is not set
+CONFIG_DEFAULT_DEVICE_TREE="stm32mp157a-icore-stm32mp1-ctouch2"
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_FIT=y
+CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SYS_PROMPT="STM32MP> "
+CONFIG_CMD_ADTIMG=y
+CONFIG_CMD_ERASEENV=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_ADC=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_REMOTEPROC=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_TIMER=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-names interrupts-extended interrupt-controller \\\#interrupt-cells interrupt-parent dmas dma-names assigned-clocks assigned-clock-rates assigned-clock-parents hwlocks"
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+# CONFIG_SPL_ENV_IS_NOWHERE is not set
+CONFIG_DM_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_STM32=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_STM32F7=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_DM_MAILBOX=y
+CONFIG_STM32_IPCC=y
+CONFIG_STM32_FMC2_EBI=y
+CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_STM32_SDMMC2=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_PHY=y
+CONFIG_PINCONF=y
+# CONFIG_SPL_PINCTRL_FULL is not set
+CONFIG_PINCTRL_STMFX=y
+CONFIG_DM_PMIC=y
+# CONFIG_SPL_PMIC_CHILDREN is not set
+CONFIG_PMIC_STPMIC1=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_REMOTEPROC_STM32_COPRO=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_STM32=y
+CONFIG_SERIAL_RX_BUFFER=y
+CONFIG_WDT=y
+CONFIG_WDT_STM32MP=y
+CONFIG_LZO=y
+CONFIG_ERRNO_STR=y
--
2.25.1
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v2 5/9] board: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0
2021-03-15 17:32 ` [PATCH v2 5/9] board: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 Jagan Teki
@ 2021-03-16 13:39 ` Patrick DELAUNAY
0 siblings, 0 replies; 20+ messages in thread
From: Patrick DELAUNAY @ 2021-03-16 13:39 UTC (permalink / raw)
To: u-boot
Hi Jagan,
On 3/15/21 6:32 PM, Jagan Teki wrote:
> Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
> board.
>
> Genaral features:
> - Ethernet 10/100
> - Wifi/BT
> - USB Type A/OTG
> - Audio Out
> - CAN
> - LVDS panel connector
>
> i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.
>
> i.Core STM32MP1 needs to mount on top of this Carrier board for
> creating complete i.Core STM32MP1 C.TOUCH 2.0 board.
>
> Linux dts commit details:
>
> commit <6ca2898df59f> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1
> C.TOUCH 2.0")
>
> Add support for it.
>
> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v2:
> - collect Patrice r-b
> - add linux dts commit
> - drop CONFIG_BOARD_EARLY_INIT_F
>
> arch/arm/dts/Makefile | 1 +
> ...2mp157a-icore-stm32mp1-ctouch2-u-boot.dtsi | 51 ++++++++++++
> .../stm32mp157a-icore-stm32mp1-ctouch2.dts | 47 +++++++++++
> arch/arm/mach-stm32mp/Kconfig | 5 ++
> board/engicam/stm32mp1/MAINTAINERS | 6 ++
> ...stm32mp15-icore-stm32mp1-ctouch2_defconfig | 79 +++++++++++++++++++
> 6 files changed, 189 insertions(+)
> create mode 100644 arch/arm/dts/stm32mp157a-icore-stm32mp1-ctouch2-u-boot.dtsi
> create mode 100644 arch/arm/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts
> create mode 100644 configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig
>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Thanks
Patrick
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v2 6/9] ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 Micro SoM
2021-03-15 17:32 [PATCH v2 0/9] stm32: Add Engicam STM32MP1 SoM Jagan Teki
` (4 preceding siblings ...)
2021-03-15 17:32 ` [PATCH v2 5/9] board: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 Jagan Teki
@ 2021-03-15 17:32 ` Jagan Teki
2021-03-16 13:40 ` Patrick DELAUNAY
2021-03-15 17:32 ` [PATCH v2 7/9] ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 1X4Gb DDR3 Jagan Teki
` (2 subsequent siblings)
8 siblings, 1 reply; 20+ messages in thread
From: Jagan Teki @ 2021-03-15 17:32 UTC (permalink / raw)
To: u-boot
MicroGEA STM32MP1 is a STM32MP157A based Micro SoM.
General features:
- STM32MP157AAC
- Up to 1GB DDR3L-800
- 512MB Nand flash
- I2S
MicroGEA STM32MP1 needs to mount on top of Engicam MicroDev carrier
boards for creating complete platform solutions.
Linux dts commit details:
commit <0be81dfaeaf8> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1
SoM")
Add support for it.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- collect Patrice r-b
- add linux dts commit
- drop CONFIG_BOARD_EARLY_INIT_F
.../dts/stm32mp157a-microgea-stm32mp1.dtsi | 148 ++++++++++++++++++
1 file changed, 148 insertions(+)
create mode 100644 arch/arm/dts/stm32mp157a-microgea-stm32mp1.dtsi
diff --git a/arch/arm/dts/stm32mp157a-microgea-stm32mp1.dtsi b/arch/arm/dts/stm32mp157a-microgea-stm32mp1.dtsi
new file mode 100644
index 0000000000..0b85175f15
--- /dev/null
+++ b/arch/arm/dts/stm32mp157a-microgea-stm32mp1.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+/ {
+ compatible = "engicam,microgea-stm32mp1", "st,stm32mp157";
+
+ memory at c0000000 {
+ device_type = "memory";
+ reg = <0xc0000000 0x10000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mcuram2: mcuram2 at 10000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10000000 0x40000>;
+ no-map;
+ };
+
+ vdev0vring0: vdev0vring0 at 10040000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10040000 0x1000>;
+ no-map;
+ };
+
+ vdev0vring1: vdev0vring1 at 10041000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10041000 0x1000>;
+ no-map;
+ };
+
+ vdev0buffer: vdev0buffer at 10042000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10042000 0x4000>;
+ no-map;
+ };
+
+ mcuram: mcuram at 30000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x30000000 0x40000>;
+ no-map;
+ };
+
+ retram: retram at 38000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x38000000 0x10000>;
+ no-map;
+ };
+ };
+
+ vin: regulator-vin {
+ compatible = "regulator-fixed";
+ regulator-name = "vin";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ vddcore: regulator-vddcore {
+ compatible = "regulator-fixed";
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ vin-supply = <&vin>;
+ };
+
+ vdd: regulator-vdd {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <&vin>;
+ };
+
+ vddq_ddr: regulator-vddq-ddr {
+ compatible = "regulator-fixed";
+ regulator-name = "vddq_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ vin-supply = <&vin>;
+ };
+};
+
+&dts {
+ status = "okay";
+};
+
+&fmc {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&fmc_pins_a>;
+ pinctrl-1 = <&fmc_sleep_pins_a>;
+ status = "okay";
+
+ nand-controller at 4,0 {
+ status = "okay";
+
+ nand at 0 {
+ reg = <0>;
+ nand-on-flash-bbt;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+};
+
+&ipcc {
+ status = "okay";
+};
+
+&iwdg2{
+ timeout-sec = <32>;
+ status = "okay";
+};
+
+&m4_rproc{
+ memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+ <&vdev0vring1>, <&vdev0buffer>;
+ mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+ mbox-names = "vq0", "vq1", "shutdown";
+ interrupt-parent = <&exti>;
+ interrupts = <68 1>;
+ status = "okay";
+};
+
+&rng1 {
+ status = "okay";
+};
+
+&rtc{
+ status = "okay";
+};
+
+&vrefbuf {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ vdda-supply = <&vdd>;
+ status = "okay";
+};
--
2.25.1
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v2 6/9] ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 Micro SoM
2021-03-15 17:32 ` [PATCH v2 6/9] ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 Micro SoM Jagan Teki
@ 2021-03-16 13:40 ` Patrick DELAUNAY
0 siblings, 0 replies; 20+ messages in thread
From: Patrick DELAUNAY @ 2021-03-16 13:40 UTC (permalink / raw)
To: u-boot
Hi Jagan,
On 3/15/21 6:32 PM, Jagan Teki wrote:
> MicroGEA STM32MP1 is a STM32MP157A based Micro SoM.
>
> General features:
> - STM32MP157AAC
> - Up to 1GB DDR3L-800
> - 512MB Nand flash
> - I2S
>
> MicroGEA STM32MP1 needs to mount on top of Engicam MicroDev carrier
> boards for creating complete platform solutions.
>
> Linux dts commit details:
>
> commit <0be81dfaeaf8> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1
> SoM")
>
> Add support for it.
>
> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v2:
> - collect Patrice r-b
> - add linux dts commit
> - drop CONFIG_BOARD_EARLY_INIT_F
>
> .../dts/stm32mp157a-microgea-stm32mp1.dtsi | 148 ++++++++++++++++++
> 1 file changed, 148 insertions(+)
> create mode 100644 arch/arm/dts/stm32mp157a-microgea-stm32mp1.dtsi
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Thanks
Patrick
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v2 7/9] ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 1X4Gb DDR3
2021-03-15 17:32 [PATCH v2 0/9] stm32: Add Engicam STM32MP1 SoM Jagan Teki
` (5 preceding siblings ...)
2021-03-15 17:32 ` [PATCH v2 6/9] ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 Micro SoM Jagan Teki
@ 2021-03-15 17:32 ` Jagan Teki
2021-03-16 13:46 ` Patrick DELAUNAY
2021-03-15 17:32 ` [PATCH v2 8/9] board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 board Jagan Teki
2021-03-15 17:32 ` [PATCH v2 9/9] board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OF Jagan Teki
8 siblings, 1 reply; 20+ messages in thread
From: Jagan Teki @ 2021-03-15 17:32 UTC (permalink / raw)
To: u-boot
Engicam MicroGEA STM32MP1 Micro SOM has mounted 1x4Gb DDR3
which has 16bits width 533Mhz frequency.
Add DDR configurations via dtsi.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- collect Patrice r-b
...m32mp15-ddr3-microgea-1x4Gb-1066-binG.dtsi | 121 ++++++++++++++++++
1 file changed, 121 insertions(+)
create mode 100644 arch/arm/dts/stm32mp15-ddr3-microgea-1x4Gb-1066-binG.dtsi
diff --git a/arch/arm/dts/stm32mp15-ddr3-microgea-1x4Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-microgea-1x4Gb-1066-binG.dtsi
new file mode 100644
index 0000000000..950f292abb
--- /dev/null
+++ b/arch/arm/dts/stm32mp15-ddr3-microgea-1x4Gb-1066-binG.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ *
+ * STM32MP157C DK1/DK2 BOARD configuration
+ * 1x DDR3L 4Gb, 16-bit, 533MHz.
+ * Reference used NT5CC256M16DP-DI from NANYA
+ *
+ * DDR type / Platform DDR3/3L
+ * freq 533MHz
+ * width 16
+ * datasheet 0 = MT41J256M16-187 / DDR3-1066 bin G
+ * DDR density 4
+ * timing mode optimized
+ * Scheduling/QoS options : type = 2
+ * address mapping : RBC
+ * Tc > + 85C : N
+ */
+#define DDR_MEM_COMPATIBLE ddr3-microgea-1066-888-bin-g-1x4gb-533mhz
+#define DDR_MEM_NAME "DDR3-1066/888 bin G 1x4Gb 533MHz v1.45"
+#define DDR_MEM_SPEED 533000
+#define DDR_MEM_SIZE 0x20000000
+
+#define DDR_MSTR 0x00041401
+#define DDR_MRCTRL0 0x00000010
+#define DDR_MRCTRL1 0x00000000
+#define DDR_DERATEEN 0x00000000
+#define DDR_DERATEINT 0x00800000
+#define DDR_PWRCTL 0x00000000
+#define DDR_PWRTMG 0x00400010
+#define DDR_HWLPCTL 0x00000000
+#define DDR_RFSHCTL0 0x00210000
+#define DDR_RFSHCTL3 0x00000000
+#define DDR_RFSHTMG 0x0081008B
+#define DDR_CRCPARCTL0 0x00000000
+#define DDR_DRAMTMG0 0x121B2414
+#define DDR_DRAMTMG1 0x000A041C
+#define DDR_DRAMTMG2 0x0608090F
+#define DDR_DRAMTMG3 0x0050400C
+#define DDR_DRAMTMG4 0x08040608
+#define DDR_DRAMTMG5 0x06060403
+#define DDR_DRAMTMG6 0x02020002
+#define DDR_DRAMTMG7 0x00000202
+#define DDR_DRAMTMG8 0x00001005
+#define DDR_DRAMTMG14 0x000000A0
+#define DDR_ZQCTL0 0xC2000040
+#define DDR_DFITMG0 0x02060105
+#define DDR_DFITMG1 0x00000202
+#define DDR_DFILPCFG0 0x07000000
+#define DDR_DFIUPD0 0xC0400003
+#define DDR_DFIUPD1 0x00000000
+#define DDR_DFIUPD2 0x00000000
+#define DDR_DFIPHYMSTR 0x00000000
+#define DDR_ADDRMAP1 0x00070707
+#define DDR_ADDRMAP2 0x00000000
+#define DDR_ADDRMAP3 0x1F000000
+#define DDR_ADDRMAP4 0x00001F1F
+#define DDR_ADDRMAP5 0x06060606
+#define DDR_ADDRMAP6 0x0F060606
+#define DDR_ADDRMAP9 0x00000000
+#define DDR_ADDRMAP10 0x00000000
+#define DDR_ADDRMAP11 0x00000000
+#define DDR_ODTCFG 0x06000600
+#define DDR_ODTMAP 0x00000001
+#define DDR_SCHED 0x00000C01
+#define DDR_SCHED1 0x00000000
+#define DDR_PERFHPR1 0x01000001
+#define DDR_PERFLPR1 0x08000200
+#define DDR_PERFWR1 0x08000400
+#define DDR_DBG0 0x00000000
+#define DDR_DBG1 0x00000000
+#define DDR_DBGCMD 0x00000000
+#define DDR_POISONCFG 0x00000000
+#define DDR_PCCFG 0x00000010
+#define DDR_PCFGR_0 0x00010000
+#define DDR_PCFGW_0 0x00000000
+#define DDR_PCFGQOS0_0 0x02100C03
+#define DDR_PCFGQOS1_0 0x00800100
+#define DDR_PCFGWQOS0_0 0x01100C03
+#define DDR_PCFGWQOS1_0 0x01000200
+#define DDR_PCFGR_1 0x00010000
+#define DDR_PCFGW_1 0x00000000
+#define DDR_PCFGQOS0_1 0x02100C03
+#define DDR_PCFGQOS1_1 0x00800040
+#define DDR_PCFGWQOS0_1 0x01100C03
+#define DDR_PCFGWQOS1_1 0x01000200
+#define DDR_PGCR 0x01442E02
+#define DDR_PTR0 0x0022AA5B
+#define DDR_PTR1 0x04841104
+#define DDR_PTR2 0x042DA068
+#define DDR_ACIOCR 0x10400812
+#define DDR_DXCCR 0x00000C40
+#define DDR_DSGCR 0xF200011F
+#define DDR_DCR 0x0000000B
+#define DDR_DTPR0 0x38D488D0
+#define DDR_DTPR1 0x098B00D8
+#define DDR_DTPR2 0x10023600
+#define DDR_MR0 0x00000840
+#define DDR_MR1 0x00000000
+#define DDR_MR2 0x00000208
+#define DDR_MR3 0x00000000
+#define DDR_ODTCR 0x00010000
+#define DDR_ZQ0CR1 0x00000038
+#define DDR_DX0GCR 0x0000CE81
+#define DDR_DX0DLLCR 0x40000000
+#define DDR_DX0DQTR 0xFFFFFFFF
+#define DDR_DX0DQSTR 0x3DB02000
+#define DDR_DX1GCR 0x0000CE81
+#define DDR_DX1DLLCR 0x40000000
+#define DDR_DX1DQTR 0xFFFFFFFF
+#define DDR_DX1DQSTR 0x3DB02000
+#define DDR_DX2GCR 0x0000CE80
+#define DDR_DX2DLLCR 0x40000000
+#define DDR_DX2DQTR 0xFFFFFFFF
+#define DDR_DX2DQSTR 0x3DB02000
+#define DDR_DX3GCR 0x0000CE80
+#define DDR_DX3DLLCR 0x40000000
+#define DDR_DX3DQTR 0xFFFFFFFF
+#define DDR_DX3DQSTR 0x3DB02000
+
+#include "stm32mp15-ddr.dtsi"
--
2.25.1
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v2 7/9] ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 1X4Gb DDR3
2021-03-15 17:32 ` [PATCH v2 7/9] ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 1X4Gb DDR3 Jagan Teki
@ 2021-03-16 13:46 ` Patrick DELAUNAY
2021-03-16 15:02 ` Jagan Teki
0 siblings, 1 reply; 20+ messages in thread
From: Patrick DELAUNAY @ 2021-03-16 13:46 UTC (permalink / raw)
To: u-boot
Hi Jagan,
On 3/15/21 6:32 PM, Jagan Teki wrote:
> Engicam MicroGEA STM32MP1 Micro SOM has mounted 1x4Gb DDR3
> which has 16bits width 533Mhz frequency.
>
> Add DDR configurations via dtsi.
>
> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v2:
> - collect Patrice r-b
>
> ...m32mp15-ddr3-microgea-1x4Gb-1066-binG.dtsi | 121 ++++++++++++++++++
> 1 file changed, 121 insertions(+)
> create mode 100644 arch/arm/dts/stm32mp15-ddr3-microgea-1x4Gb-1066-binG.dtsi
>
> diff --git a/arch/arm/dts/stm32mp15-ddr3-microgea-1x4Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-microgea-1x4Gb-1066-binG.dtsi
> new file mode 100644
> index 0000000000..950f292abb
> --- /dev/null
> +++ b/arch/arm/dts/stm32mp15-ddr3-microgea-1x4Gb-1066-binG.dtsi
> @@ -0,0 +1,121 @@
> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
> +/*
> + * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
> + *
> + * STM32MP157C DK1/DK2 BOARD configuration
> + * 1x DDR3L 4Gb, 16-bit, 533MHz.
> + * Reference used NT5CC256M16DP-DI from NANYA
> + *
> + * DDR type / Platform DDR3/3L
> + * freq 533MHz
> + * width 16
> + * datasheet 0 = MT41J256M16-187 / DDR3-1066 bin G
> + * DDR density 4
> + * timing mode optimized
> + * Scheduling/QoS options : type = 2
> + * address mapping : RBC
> + * Tc > + 85C : N
> + */
This file is identical to stm32mp15-ddr3-1x4Gb-1066-binG.dtsi, because
it is a files generated
with CubeMX with the same parameters.
Do you any reason to duplicate it ?
Do you expect some board-specific tuning or configuration with be
integrated latter.
If it is not the case, I think you can reuse the file used by
STMicroelectronics boards DK1/DK2
in the next patch.
#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi"
Regards
Patrick
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v2 7/9] ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 1X4Gb DDR3
2021-03-16 13:46 ` Patrick DELAUNAY
@ 2021-03-16 15:02 ` Jagan Teki
0 siblings, 0 replies; 20+ messages in thread
From: Jagan Teki @ 2021-03-16 15:02 UTC (permalink / raw)
To: u-boot
Hi Patrick,
On Tue, Mar 16, 2021 at 7:16 PM Patrick DELAUNAY
<patrick.delaunay@foss.st.com> wrote:
>
> Hi Jagan,
>
> On 3/15/21 6:32 PM, Jagan Teki wrote:
> > Engicam MicroGEA STM32MP1 Micro SOM has mounted 1x4Gb DDR3
> > which has 16bits width 533Mhz frequency.
> >
> > Add DDR configurations via dtsi.
> >
> > Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > ---
> > Changes for v2:
> > - collect Patrice r-b
> >
> > ...m32mp15-ddr3-microgea-1x4Gb-1066-binG.dtsi | 121 ++++++++++++++++++
> > 1 file changed, 121 insertions(+)
> > create mode 100644 arch/arm/dts/stm32mp15-ddr3-microgea-1x4Gb-1066-binG.dtsi
> >
> > diff --git a/arch/arm/dts/stm32mp15-ddr3-microgea-1x4Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-microgea-1x4Gb-1066-binG.dtsi
> > new file mode 100644
> > index 0000000000..950f292abb
> > --- /dev/null
> > +++ b/arch/arm/dts/stm32mp15-ddr3-microgea-1x4Gb-1066-binG.dtsi
> > @@ -0,0 +1,121 @@
> > +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
> > +/*
> > + * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
> > + *
> > + * STM32MP157C DK1/DK2 BOARD configuration
> > + * 1x DDR3L 4Gb, 16-bit, 533MHz.
> > + * Reference used NT5CC256M16DP-DI from NANYA
> > + *
> > + * DDR type / Platform DDR3/3L
> > + * freq 533MHz
> > + * width 16
> > + * datasheet 0 = MT41J256M16-187 / DDR3-1066 bin G
> > + * DDR density 4
> > + * timing mode optimized
> > + * Scheduling/QoS options : type = 2
> > + * address mapping : RBC
> > + * Tc > + 85C : N
> > + */
>
> This file is identical to stm32mp15-ddr3-1x4Gb-1066-binG.dtsi, because
> it is a files generated
>
> with CubeMX with the same parameters.
>
> Do you any reason to duplicate it ?
>
> Do you expect some board-specific tuning or configuration with be
> integrated latter.
Yes, ie reason. You are right, I think will reuse exiting dtsi and
update based on future requirements. I Will update in the next
version, thanks!
--
Jagan Teki,
Amarula Solutions India Pvt. Ltd.
Co-Founder & Embedded Linux Architect
405/E-Block, Sri Lakshmi Shubham Arcade, Chandanagar, Hyderabad - 500050, India
M. (+91) 910 009 0959
[`as] http://www.amarulasolutions.com
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v2 8/9] board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 board
2021-03-15 17:32 [PATCH v2 0/9] stm32: Add Engicam STM32MP1 SoM Jagan Teki
` (6 preceding siblings ...)
2021-03-15 17:32 ` [PATCH v2 7/9] ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 1X4Gb DDR3 Jagan Teki
@ 2021-03-15 17:32 ` Jagan Teki
2021-03-16 13:51 ` Patrick DELAUNAY
2021-03-15 17:32 ` [PATCH v2 9/9] board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OF Jagan Teki
8 siblings, 1 reply; 20+ messages in thread
From: Jagan Teki @ 2021-03-15 17:32 UTC (permalink / raw)
To: u-boot
MicroDev 2.0 is a general purpose miniature carrier board with CAN,
LTE and LVDS panel interfaces.
Genaral features:
- Ethernet 10/100
- USB Type A
- Audio Out
- microSD
- LVDS panel connector
- Wifi/BT (option)
- UMTS LTE with sim connector (option)
MicroGEA STM32MP1 is a STM32MP157A based Micro SoM.
MicroGEA STM32MP1 needs to mount on top of this MicroDev 2.0 board
for creating complete MicroGEA STM32MP1 MicroDev 2.0 Carrier board.
Linux dts commit details:
commit <f838dae7afd0> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1
MicroDev 2.0 board")
Add support for it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- collect Patrice r-b
- add linux dts commit
- drop CONFIG_BOARD_EARLY_INIT_F
arch/arm/dts/Makefile | 1 +
...-microgea-stm32mp1-microdev2.0-u-boot.dtsi | 51 ++++++++
...32mp157a-microgea-stm32mp1-microdev2.0.dts | 55 ++++++++
.../stm32mp157a-microgea-stm32mp1-u-boot.dtsi | 118 ++++++++++++++++++
arch/arm/mach-stm32mp/Kconfig | 20 +++
board/engicam/stm32mp1/Kconfig | 2 +-
board/engicam/stm32mp1/MAINTAINERS | 6 +
...mp15-microgea-stm32mp1-microdev2_defconfig | 79 ++++++++++++
8 files changed, 331 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-u-boot.dtsi
create mode 100644 arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
create mode 100644 arch/arm/dts/stm32mp157a-microgea-stm32mp1-u-boot.dtsi
create mode 100644 configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index ce4521b891..64d73b96ef 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -992,6 +992,7 @@ dtb-$(CONFIG_STM32MP15x) += \
stm32mp157a-avenger96.dtb \
stm32mp157a-icore-stm32mp1-ctouch2.dtb \
stm32mp157a-icore-stm32mp1-edimm2.2.dtb \
+ stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \
stm32mp157c-dk2.dtb \
stm32mp157c-ed1.dtb \
stm32mp157c-ev1.dtb \
diff --git a/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-u-boot.dtsi b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-u-boot.dtsi
new file mode 100644
index 0000000000..e4bd215812
--- /dev/null
+++ b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-u-boot.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Amarula Solutions(India)
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "stm32mp157a-microgea-stm32mp1-u-boot.dtsi"
+
+/{
+ aliases {
+ mmc0 = &sdmmc1;
+ };
+
+ chosen {
+ stdout-path = &uart4;
+ };
+};
+
+&sdmmc1 {
+ u-boot,dm-pre-reloc;
+};
+
+&sdmmc1_b4_pins_a {
+ u-boot,dm-pre-reloc;
+
+ pins1 {
+ u-boot,dm-pre-reloc;
+ };
+
+ pins2 {
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&uart4 {
+ u-boot,dm-pre-reloc;
+};
+
+&uart4_pins_a {
+ u-boot,dm-pre-reloc;
+
+ pins1 {
+ u-boot,dm-pre-reloc;
+ };
+
+ pins2 {
+ u-boot,dm-pre-reloc;
+ bias-pull-up;
+ };
+};
diff --git a/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
new file mode 100644
index 0000000000..7a75868164
--- /dev/null
+++ b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+/dts-v1/;
+#include "stm32mp157.dtsi"
+#include "stm32mp157a-microgea-stm32mp1.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Engicam MicroGEA STM32MP1 MicroDev 2.0 Carrier Board";
+ compatible = "engicam,microgea-stm32mp1-microdev2.0",
+ "engicam,microgea-stm32mp1", "st,stm32mp157";
+
+ aliases {
+ serial0 = &uart4;
+ serial1 = &uart8;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&sdmmc1 {
+ bus-width = <4>;
+ disable-wp;
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc1_b4_pins_a>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+ st,neg-edge;
+ vmmc-supply = <&vdd>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default", "sleep", "idle";
+ pinctrl-0 = <&uart4_pins_a>;
+ pinctrl-1 = <&uart4_sleep_pins_a>;
+ pinctrl-2 = <&uart4_idle_pins_a>;
+ status = "okay";
+};
+
+/* J31: RS323 */
+&uart8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart8_pins_a>;
+ status = "okay";
+};
diff --git a/arch/arm/dts/stm32mp157a-microgea-stm32mp1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-u-boot.dtsi
new file mode 100644
index 0000000000..32ce31458a
--- /dev/null
+++ b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-u-boot.dtsi
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Amarula Solutions(India)
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+#include "stm32mp15-u-boot.dtsi"
+#include "stm32mp15-ddr3-microgea-1x4Gb-1066-binG.dtsi"
+
+&vin {
+ u-boot,dm-pre-reloc;
+};
+
+&vddcore {
+ u-boot,dm-pre-reloc;
+};
+
+&vdd {
+ u-boot,dm-pre-reloc;
+};
+
+&vddq_ddr {
+ u-boot,dm-pre-reloc;
+};
+
+&rcc {
+ st,clksrc = <
+ CLK_MPU_PLL1P
+ CLK_AXI_PLL2P
+ CLK_MCU_PLL3P
+ CLK_PLL12_HSE
+ CLK_PLL3_HSE
+ CLK_PLL4_HSE
+ CLK_RTC_LSE
+ CLK_MCO1_DISABLED
+ CLK_MCO2_DISABLED
+ >;
+
+ st,clkdiv = <
+ 1 /*MPU*/
+ 0 /*AXI*/
+ 0 /*MCU*/
+ 1 /*APB1*/
+ 1 /*APB2*/
+ 1 /*APB3*/
+ 1 /*APB4*/
+ 2 /*APB5*/
+ 23 /*RTC*/
+ 0 /*MCO1*/
+ 0 /*MCO2*/
+ >;
+
+ st,pkcs = <
+ CLK_CKPER_HSE
+ CLK_FMC_ACLK
+ CLK_QSPI_ACLK
+ CLK_ETH_DISABLED
+ CLK_SDMMC12_PLL4P
+ CLK_DSI_DSIPLL
+ CLK_STGEN_HSE
+ CLK_USBPHY_HSE
+ CLK_SPI2S1_PLL3Q
+ CLK_SPI2S23_PLL3Q
+ CLK_SPI45_HSI
+ CLK_SPI6_HSI
+ CLK_I2C46_HSI
+ CLK_SDMMC3_PLL4P
+ CLK_USBO_USBPHY
+ CLK_ADC_CKPER
+ CLK_CEC_LSE
+ CLK_I2C12_HSI
+ CLK_I2C35_HSI
+ CLK_UART1_HSI
+ CLK_UART24_HSI
+ CLK_UART35_HSI
+ CLK_UART6_HSI
+ CLK_UART78_HSI
+ CLK_SPDIF_PLL4P
+ CLK_FDCAN_PLL4R
+ CLK_SAI1_PLL3Q
+ CLK_SAI2_PLL3Q
+ CLK_SAI3_PLL3Q
+ CLK_SAI4_PLL3Q
+ CLK_RNG1_LSI
+ CLK_RNG2_LSI
+ CLK_LPTIM1_PCLK1
+ CLK_LPTIM23_PCLK3
+ CLK_LPTIM45_LSE
+ >;
+
+ /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
+ pll2: st,pll at 1 {
+ compatible = "st,stm32mp1-pll";
+ reg = <1>;
+ cfg = < 2 65 1 0 0 PQR(1,1,1) >;
+ frac = < 0x1400 >;
+ u-boot,dm-pre-reloc;
+ };
+
+ /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
+ pll3: st,pll at 2 {
+ compatible = "st,stm32mp1-pll";
+ reg = <2>;
+ cfg = < 1 33 1 16 36 PQR(1,1,1) >;
+ frac = < 0x1a04 >;
+ u-boot,dm-pre-reloc;
+ };
+
+ /* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
+ pll4: st,pll at 3 {
+ compatible = "st,stm32mp1-pll";
+ reg = <3>;
+ cfg = < 3 98 5 7 7 PQR(1,1,1) >;
+ u-boot,dm-pre-reloc;
+ };
+};
diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
index 15c832b16b..c1622df7f3 100644
--- a/arch/arm/mach-stm32mp/Kconfig
+++ b/arch/arm/mach-stm32mp/Kconfig
@@ -77,6 +77,26 @@ config TARGET_ST_STM32MP15x
Evalulation board (EV1) or Discovery board (DK1 and DK2).
The difference between board are managed with devicetree
+config TARGET_MICROGEA_STM32MP1
+ bool "Engicam MicroGEA STM32MP1 SOM"
+ select STM32MP15x
+ imply BOOTCOUNT_LIMIT
+ imply BOOTSTAGE
+ imply CMD_BOOTCOUNT
+ imply CMD_BOOTSTAGE
+ imply CMD_CLS if CMD_BMP
+ imply DISABLE_CONSOLE
+ imply PRE_CONSOLE_BUFFER
+ imply SILENT_CONSOLE
+ help
+ MicroGEA STM32MP1 is a STM32MP157A based Micro SOM.
+
+ MicroGEA STM32MP1 MicroDev 2.0:
+ * MicroDev 2.0 is a general purpose miniature carrier board with CAN,
+ LTE and LVDS panel interfaces.
+ * MicroGEA STM32MP1 needs to mount on top of this MicroDev 2.0 board
+ for creating complete MicroGEA STM32MP1 MicroDev 2.0 Carrier board.
+
config TARGET_ICORE_STM32MP1
bool "Engicam i.Core STM32MP1 SOM"
select STM32MP15x
diff --git a/board/engicam/stm32mp1/Kconfig b/board/engicam/stm32mp1/Kconfig
index e7bccc09fb..c800fd4e60 100644
--- a/board/engicam/stm32mp1/Kconfig
+++ b/board/engicam/stm32mp1/Kconfig
@@ -1,4 +1,4 @@
-if TARGET_ICORE_STM32MP1
+if TARGET_ICORE_STM32MP1 || TARGET_MICROGEA_STM32MP1
config SYS_BOARD
default "stm32mp1"
diff --git a/board/engicam/stm32mp1/MAINTAINERS b/board/engicam/stm32mp1/MAINTAINERS
index 62c6925c8d..c0bb767782 100644
--- a/board/engicam/stm32mp1/MAINTAINERS
+++ b/board/engicam/stm32mp1/MAINTAINERS
@@ -1,3 +1,9 @@
+MicroGEA-STM32MP1-MICRODEV2.0
+M: Jagan Teki <jagan@amarulasolutions.com>
+M: Matteo Lisi <matteo.lisi@engicam.com>
+S: Maintained
+F: configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig
+
i.Core-STM32MP1-CTOUCH2.0
M: Jagan Teki <jagan@amarulasolutions.com>
M: Matteo Lisi <matteo.lisi@engicam.com>
diff --git a/configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig b/configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig
new file mode 100644
index 0000000000..17aad82b88
--- /dev/null
+++ b/configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig
@@ -0,0 +1,79 @@
+CONFIG_ARM=y
+CONFIG_ARCH_STM32MP=y
+CONFIG_SYS_MALLOC_F_LEN=0x3000
+CONFIG_SYS_MEMTEST_START=0xc0000000
+CONFIG_SYS_MEMTEST_END=0xc4000000
+CONFIG_ENV_OFFSET=0x280000
+CONFIG_SPL_TEXT_BASE=0x2FFC2500
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL=y
+CONFIG_TARGET_MICROGEA_STM32MP1=y
+CONFIG_ENV_OFFSET_REDUND=0x2C0000
+# CONFIG_ARMV7_VIRT is not set
+CONFIG_DEFAULT_DEVICE_TREE="stm32mp157a-microgea-stm32mp1-microdev2.0"
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_FIT=y
+CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SYS_PROMPT="STM32MP> "
+CONFIG_CMD_ADTIMG=y
+CONFIG_CMD_ERASEENV=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_ADC=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_REMOTEPROC=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_TIMER=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-names interrupts-extended interrupt-controller \\\#interrupt-cells interrupt-parent dmas dma-names assigned-clocks assigned-clock-rates assigned-clock-parents hwlocks"
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+# CONFIG_SPL_ENV_IS_NOWHERE is not set
+CONFIG_DM_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_STM32=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_STM32F7=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_DM_MAILBOX=y
+CONFIG_STM32_IPCC=y
+CONFIG_STM32_FMC2_EBI=y
+CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_STM32_SDMMC2=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_PHY=y
+CONFIG_PINCONF=y
+# CONFIG_SPL_PINCTRL_FULL is not set
+CONFIG_PINCTRL_STMFX=y
+CONFIG_DM_PMIC=y
+# CONFIG_SPL_PMIC_CHILDREN is not set
+CONFIG_PMIC_STPMIC1=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_REMOTEPROC_STM32_COPRO=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_STM32=y
+CONFIG_SERIAL_RX_BUFFER=y
+CONFIG_WDT=y
+CONFIG_WDT_STM32MP=y
+CONFIG_LZO=y
+CONFIG_ERRNO_STR=y
--
2.25.1
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v2 8/9] board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 board
2021-03-15 17:32 ` [PATCH v2 8/9] board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 board Jagan Teki
@ 2021-03-16 13:51 ` Patrick DELAUNAY
0 siblings, 0 replies; 20+ messages in thread
From: Patrick DELAUNAY @ 2021-03-16 13:51 UTC (permalink / raw)
To: u-boot
On 3/15/21 6:32 PM, Jagan Teki wrote:
> MicroDev 2.0 is a general purpose miniature carrier board with CAN,
> LTE and LVDS panel interfaces.
>
> Genaral features:
> - Ethernet 10/100
> - USB Type A
> - Audio Out
> - microSD
> - LVDS panel connector
> - Wifi/BT (option)
> - UMTS LTE with sim connector (option)
>
> MicroGEA STM32MP1 is a STM32MP157A based Micro SoM.
>
> MicroGEA STM32MP1 needs to mount on top of this MicroDev 2.0 board
> for creating complete MicroGEA STM32MP1 MicroDev 2.0 Carrier board.
>
> Linux dts commit details:
>
> commit <f838dae7afd0> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1
> MicroDev 2.0 board")
>
> Add support for it.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v2:
> - collect Patrice r-b
> - add linux dts commit
> - drop CONFIG_BOARD_EARLY_INIT_F
>
> arch/arm/dts/Makefile | 1 +
> ...-microgea-stm32mp1-microdev2.0-u-boot.dtsi | 51 ++++++++
> ...32mp157a-microgea-stm32mp1-microdev2.0.dts | 55 ++++++++
> .../stm32mp157a-microgea-stm32mp1-u-boot.dtsi | 118 ++++++++++++++++++
> arch/arm/mach-stm32mp/Kconfig | 20 +++
> board/engicam/stm32mp1/Kconfig | 2 +-
> board/engicam/stm32mp1/MAINTAINERS | 6 +
> ...mp15-microgea-stm32mp1-microdev2_defconfig | 79 ++++++++++++
> 8 files changed, 331 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-u-boot.dtsi
> create mode 100644 arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
> create mode 100644 arch/arm/dts/stm32mp157a-microgea-stm32mp1-u-boot.dtsi
> create mode 100644 configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index ce4521b891..64d73b96ef 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -992,6 +992,7 @@ dtb-$(CONFIG_STM32MP15x) += \
> stm32mp157a-avenger96.dtb \
> stm32mp157a-icore-stm32mp1-ctouch2.dtb \
> stm32mp157a-icore-stm32mp1-edimm2.2.dtb \
> + stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \
> stm32mp157c-dk2.dtb \
> stm32mp157c-ed1.dtb \
> stm32mp157c-ev1.dtb \
...
> diff --git a/arch/arm/dts/stm32mp157a-microgea-stm32mp1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-u-boot.dtsi
> new file mode 100644
> index 0000000000..32ce31458a
> --- /dev/null
> +++ b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-u-boot.dtsi
> @@ -0,0 +1,118 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
> + * Copyright (c) 2020 Amarula Solutions(India)
> + * Author: Jagan Teki <jagan@amarulasolutions.com>
> + */
> +
> +#include <dt-bindings/clock/stm32mp1-clksrc.h>
> +#include "stm32mp15-u-boot.dtsi"
> +#include "stm32mp15-ddr3-microgea-1x4Gb-1066-binG.dtsi"
#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi" ?
Anyway:
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Thanks
Patrick
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v2 9/9] board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OF
2021-03-15 17:32 [PATCH v2 0/9] stm32: Add Engicam STM32MP1 SoM Jagan Teki
` (7 preceding siblings ...)
2021-03-15 17:32 ` [PATCH v2 8/9] board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 board Jagan Teki
@ 2021-03-15 17:32 ` Jagan Teki
2021-03-16 14:21 ` Patrick DELAUNAY
8 siblings, 1 reply; 20+ messages in thread
From: Jagan Teki @ 2021-03-15 17:32 UTC (permalink / raw)
To: u-boot
7" OF is a capacitive touch 7" Open Frame panel solutions with
- 7" AUO B101AW03 LVDS panel
- EDT, FT5526 Touch
MicroGEA STM32MP1 is a STM32MP157A based Micro SoM.
MicroDev 2.0 is a general purpose miniature carrier board with CAN,
LTE and LVDS panel interfaces.
MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with
pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0
7" Open Frame Solution board.
Linux dts commit details:
commit <1d278204cbaa> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1
MicroDev 2.0 7" OF")
Add support for it.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- collect Patrice r-b
- add linux dts commit
- drop CONFIG_BOARD_EARLY_INIT_F
arch/arm/dts/Makefile | 1 +
...rogea-stm32mp1-microdev2.0-of7-u-boot.dtsi | 51 ++++++
...157a-microgea-stm32mp1-microdev2.0-of7.dts | 154 ++++++++++++++++++
arch/arm/mach-stm32mp/Kconfig | 7 +
board/engicam/stm32mp1/MAINTAINERS | 6 +
...-microgea-stm32mp1-microdev2-of7_defconfig | 79 +++++++++
6 files changed, 298 insertions(+)
create mode 100644 arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7-u-boot.dtsi
create mode 100644 arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
create mode 100644 configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 64d73b96ef..43c604f2f8 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -993,6 +993,7 @@ dtb-$(CONFIG_STM32MP15x) += \
stm32mp157a-icore-stm32mp1-ctouch2.dtb \
stm32mp157a-icore-stm32mp1-edimm2.2.dtb \
stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \
+ stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \
stm32mp157c-dk2.dtb \
stm32mp157c-ed1.dtb \
stm32mp157c-ev1.dtb \
diff --git a/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7-u-boot.dtsi b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7-u-boot.dtsi
new file mode 100644
index 0000000000..e4bd215812
--- /dev/null
+++ b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7-u-boot.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Amarula Solutions(India)
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "stm32mp157a-microgea-stm32mp1-u-boot.dtsi"
+
+/{
+ aliases {
+ mmc0 = &sdmmc1;
+ };
+
+ chosen {
+ stdout-path = &uart4;
+ };
+};
+
+&sdmmc1 {
+ u-boot,dm-pre-reloc;
+};
+
+&sdmmc1_b4_pins_a {
+ u-boot,dm-pre-reloc;
+
+ pins1 {
+ u-boot,dm-pre-reloc;
+ };
+
+ pins2 {
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&uart4 {
+ u-boot,dm-pre-reloc;
+};
+
+&uart4_pins_a {
+ u-boot,dm-pre-reloc;
+
+ pins1 {
+ u-boot,dm-pre-reloc;
+ };
+
+ pins2 {
+ u-boot,dm-pre-reloc;
+ bias-pull-up;
+ };
+};
diff --git a/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
new file mode 100644
index 0000000000..674b2d330d
--- /dev/null
+++ b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+/dts-v1/;
+#include "stm32mp157.dtsi"
+#include "stm32mp157a-microgea-stm32mp1.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Engicam MicroGEA STM32MP1 MicroDev 2.0 7\" Open Frame";
+ compatible = "engicam,microgea-stm32mp1-microdev2.0-of7",
+ "engicam,microgea-stm32mp1", "st,stm32mp157";
+
+ aliases {
+ serial0 = &uart4;
+ serial1 = &uart8;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ backlight: backlight {
+ compatible = "gpio-backlight";
+ gpios = <&gpiod 13 GPIO_ACTIVE_HIGH>;
+ default-on;
+ };
+
+ lcd_3v3: regulator-lcd-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpiof 10 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ power-supply = <&panel_pwr>;
+ };
+
+ panel_pwr: regulator-panel-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "panel_pwr";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpiob 10 GPIO_ACTIVE_HIGH>;
+ regulator-always-on;
+ };
+
+ panel {
+ compatible = "auo,b101aw03";
+ backlight = <&backlight>;
+ enable-gpios = <&gpiof 2 GPIO_ACTIVE_HIGH>;
+ power-supply = <&lcd_3v3>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <<dc_ep0_out>;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ i2c-scl-falling-time-ns = <20>;
+ i2c-scl-rising-time-ns = <185>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c2_pins_a>;
+ pinctrl-1 = <&i2c2_sleep_pins_a>;
+ status = "okay";
+};
+
+<dc {
+ pinctrl-names = "default";
+ pinctrl-0 = <<dc_pins>;
+ status = "okay";
+
+ port {
+ ltdc_ep0_out: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&panel_in>;
+ };
+ };
+};
+
+&pinctrl {
+ ltdc_pins: ltdc {
+ pins {
+ pinmux = <STM32_PINMUX('G', 10, AF14)>, /* LTDC_B2 */
+ <STM32_PINMUX('H', 12, AF14)>, /* LTDC_R6 */
+ <STM32_PINMUX('H', 11, AF14)>, /* LTDC_R5 */
+ <STM32_PINMUX('D', 10, AF14)>, /* LTDC_B3 */
+ <STM32_PINMUX('D', 9, AF14)>, /* LTDC_B0 */
+ <STM32_PINMUX('E', 5, AF14)>, /* LTDC_G0 */
+ <STM32_PINMUX('E', 6, AF14)>, /* LTDC_G1 */
+ <STM32_PINMUX('E', 13, AF14)>, /* LTDC_DE */
+ <STM32_PINMUX('E', 15, AF14)>, /* LTDC_R7 */
+ <STM32_PINMUX('G', 7, AF14)>, /* LTDC_CLK */
+ <STM32_PINMUX('G', 12, AF14)>, /* LTDC_B1 */
+ <STM32_PINMUX('H', 2, AF14)>, /* LTDC_R0 */
+ <STM32_PINMUX('H', 3, AF14)>, /* LTDC_R1 */
+ <STM32_PINMUX('H', 8, AF14)>, /* LTDC_R2 */
+ <STM32_PINMUX('H', 9, AF14)>, /* LTDC_R3 */
+ <STM32_PINMUX('H', 10, AF14)>, /* LTDC_R4 */
+ <STM32_PINMUX('H', 13, AF14)>, /* LTDC_G2 */
+ <STM32_PINMUX('H', 14, AF14)>, /* LTDC_G3 */
+ <STM32_PINMUX('H', 15, AF14)>, /* LTDC_G4 */
+ <STM32_PINMUX('I', 0, AF14)>, /* LTDC_G5 */
+ <STM32_PINMUX('I', 1, AF14)>, /* LTDC_G6 */
+ <STM32_PINMUX('I', 2, AF14)>, /* LTDC_G7 */
+ <STM32_PINMUX('I', 4, AF14)>, /* LTDC_B4 */
+ <STM32_PINMUX('I', 5, AF14)>, /* LTDC_B5 */
+ <STM32_PINMUX('B', 8, AF14)>, /* LTDC_B6 */
+ <STM32_PINMUX('I', 7, AF14)>, /* LTDC_B7 */
+ <STM32_PINMUX('I', 9, AF14)>, /* LTDC_VSYNC */
+ <STM32_PINMUX('I', 10, AF14)>; /* LTDC_HSYNC */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ };
+};
+
+&sdmmc1 {
+ bus-width = <4>;
+ disable-wp;
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc1_b4_pins_a>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+ st,neg-edge;
+ vmmc-supply = <&vdd>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default", "sleep", "idle";
+ pinctrl-0 = <&uart4_pins_a>;
+ pinctrl-1 = <&uart4_sleep_pins_a>;
+ pinctrl-2 = <&uart4_idle_pins_a>;
+ status = "okay";
+};
+
+/* J31: RS323 */
+&uart8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart8_pins_a>;
+ status = "okay";
+};
diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
index c1622df7f3..c22b132ac1 100644
--- a/arch/arm/mach-stm32mp/Kconfig
+++ b/arch/arm/mach-stm32mp/Kconfig
@@ -97,6 +97,13 @@ config TARGET_MICROGEA_STM32MP1
* MicroGEA STM32MP1 needs to mount on top of this MicroDev 2.0 board
for creating complete MicroGEA STM32MP1 MicroDev 2.0 Carrier board.
+ MicroGEA STM32MP1 MicroDev 2.0 7" OF:
+ * 7" OF is a capacitive touch 7" Open Frame panel solutions with LVDS
+ panel and toucscreen.
+ * MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with
+ pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0 7"
+ Open Frame Solution board.
+
config TARGET_ICORE_STM32MP1
bool "Engicam i.Core STM32MP1 SOM"
select STM32MP15x
diff --git a/board/engicam/stm32mp1/MAINTAINERS b/board/engicam/stm32mp1/MAINTAINERS
index c0bb767782..712e312665 100644
--- a/board/engicam/stm32mp1/MAINTAINERS
+++ b/board/engicam/stm32mp1/MAINTAINERS
@@ -4,6 +4,12 @@ M: Matteo Lisi <matteo.lisi@engicam.com>
S: Maintained
F: configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig
+MicroGEA-STM32MP1-MICRODEV2.0-OF7
+M: Jagan Teki <jagan@amarulasolutions.com>
+M: Matteo Lisi <matteo.lisi@engicam.com>
+S: Maintained
+F: configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig
+
i.Core-STM32MP1-CTOUCH2.0
M: Jagan Teki <jagan@amarulasolutions.com>
M: Matteo Lisi <matteo.lisi@engicam.com>
diff --git a/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig b/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig
new file mode 100644
index 0000000000..c0c7ff11c8
--- /dev/null
+++ b/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig
@@ -0,0 +1,79 @@
+CONFIG_ARM=y
+CONFIG_ARCH_STM32MP=y
+CONFIG_SYS_MALLOC_F_LEN=0x3000
+CONFIG_SYS_MEMTEST_START=0xc0000000
+CONFIG_SYS_MEMTEST_END=0xc4000000
+CONFIG_ENV_OFFSET=0x280000
+CONFIG_SPL_TEXT_BASE=0x2FFC2500
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL=y
+CONFIG_TARGET_MICROGEA_STM32MP1=y
+CONFIG_ENV_OFFSET_REDUND=0x2C0000
+# CONFIG_ARMV7_VIRT is not set
+CONFIG_DEFAULT_DEVICE_TREE="stm32mp157a-microgea-stm32mp1-microdev2.0-of7"
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_FIT=y
+CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SYS_PROMPT="STM32MP> "
+CONFIG_CMD_ADTIMG=y
+CONFIG_CMD_ERASEENV=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_ADC=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_REMOTEPROC=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_TIMER=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-names interrupts-extended interrupt-controller \\\#interrupt-cells interrupt-parent dmas dma-names assigned-clocks assigned-clock-rates assigned-clock-parents hwlocks"
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+# CONFIG_SPL_ENV_IS_NOWHERE is not set
+CONFIG_DM_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_STM32=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_STM32F7=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_DM_MAILBOX=y
+CONFIG_STM32_IPCC=y
+CONFIG_STM32_FMC2_EBI=y
+CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_STM32_SDMMC2=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_PHY=y
+CONFIG_PINCONF=y
+# CONFIG_SPL_PINCTRL_FULL is not set
+CONFIG_PINCTRL_STMFX=y
+CONFIG_DM_PMIC=y
+# CONFIG_SPL_PMIC_CHILDREN is not set
+CONFIG_PMIC_STPMIC1=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_REMOTEPROC_STM32_COPRO=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_STM32=y
+CONFIG_SERIAL_RX_BUFFER=y
+CONFIG_WDT=y
+CONFIG_WDT_STM32MP=y
+CONFIG_LZO=y
+CONFIG_ERRNO_STR=y
--
2.25.1
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v2 9/9] board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OF
2021-03-15 17:32 ` [PATCH v2 9/9] board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OF Jagan Teki
@ 2021-03-16 14:21 ` Patrick DELAUNAY
0 siblings, 0 replies; 20+ messages in thread
From: Patrick DELAUNAY @ 2021-03-16 14:21 UTC (permalink / raw)
To: u-boot
On 3/15/21 6:32 PM, Jagan Teki wrote:
> 7" OF is a capacitive touch 7" Open Frame panel solutions with
> - 7" AUO B101AW03 LVDS panel
> - EDT, FT5526 Touch
>
> MicroGEA STM32MP1 is a STM32MP157A based Micro SoM.
>
> MicroDev 2.0 is a general purpose miniature carrier board with CAN,
> LTE and LVDS panel interfaces.
>
> MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with
> pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0
> 7" Open Frame Solution board.
>
> Linux dts commit details:
>
> commit <1d278204cbaa> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1
> MicroDev 2.0 7" OF")
>
> Add support for it.
>
> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v2:
> - collect Patrice r-b
> - add linux dts commit
> - drop CONFIG_BOARD_EARLY_INIT_F
>
> arch/arm/dts/Makefile | 1 +
> ...rogea-stm32mp1-microdev2.0-of7-u-boot.dtsi | 51 ++++++
> ...157a-microgea-stm32mp1-microdev2.0-of7.dts | 154 ++++++++++++++++++
> arch/arm/mach-stm32mp/Kconfig | 7 +
> board/engicam/stm32mp1/MAINTAINERS | 6 +
> ...-microgea-stm32mp1-microdev2-of7_defconfig | 79 +++++++++
> 6 files changed, 298 insertions(+)
> create mode 100644 arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7-u-boot.dtsi
> create mode 100644 arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
> create mode 100644 configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig
>
...
> diff --git a/board/engicam/stm32mp1/MAINTAINERS b/board/engicam/stm32mp1/MAINTAINERS
> index c0bb767782..712e312665 100644
> --- a/board/engicam/stm32mp1/MAINTAINERS
> +++ b/board/engicam/stm32mp1/MAINTAINERS
> @@ -4,6 +4,12 @@ M: Matteo Lisi <matteo.lisi@engicam.com>
> S: Maintained
> F: configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig
>
> +MicroGEA-STM32MP1-MICRODEV2.0-OF7
> +M: Jagan Teki <jagan@amarulasolutions.com>
> +M: Matteo Lisi <matteo.lisi@engicam.com>
> +S: Maintained
> +F: configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig
> +
minor: you can add the also added device tree in MAINTAINERS
+F: arch/arm/dts/stm32mp15*microgea*
Anyway
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Thanks
Patrick
^ permalink raw reply [flat|nested] 20+ messages in thread