From: Aswath Govindraju <a-govindraju@ti.com> To: unlisted-recipients:; (no To-header on input) Cc: Vignesh Raghavendra <vigneshr@ti.com>, Lokesh Vutla <lokeshvutla@ti.com>, Kishon Vijay Abraham I <kishon@ti.com>, Aswath Govindraju <a-govindraju@ti.com>, Faiz Abbas <faiz_abbas@ti.com>, Sekhar Nori <nsekhar@ti.com>, Nishanth Menon <nm@ti.com>, Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>, <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org> Subject: [PATCH v6 2/3] arm64: dts: ti: k3-j7200-common-proc-board: Disable unused gpio modules Date: Fri, 19 Mar 2021 09:14:20 +0530 [thread overview] Message-ID: <20210319034422.17630-3-a-govindraju@ti.com> (raw) In-Reply-To: <20210319034422.17630-1-a-govindraju@ti.com> From: Faiz Abbas <faiz_abbas@ti.com> There are 6 gpio instances inside SoC with 2 groups as show below: Group one: wkup_gpio0, wkup_gpio1 Group two: main_gpio0, main_gpio2, main_gpio4, main_gpio6 Only one instance from each group can be used at a time. So use main_gpio0 and wkup_gpio0 in current linux context and disable the rest of the nodes. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> --- .../boot/dts/ti/k3-j7200-common-proc-board.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts index 4a7182abccf5..b493f939b09a 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts @@ -122,6 +122,22 @@ status = "disabled"; }; +&main_gpio2 { + status = "disabled"; +}; + +&main_gpio4 { + status = "disabled"; +}; + +&main_gpio6 { + status = "disabled"; +}; + +&wkup_gpio1 { + status = "disabled"; +}; + &mcu_cpsw { pinctrl-names = "default"; pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Aswath Govindraju <a-govindraju@ti.com> Cc: Vignesh Raghavendra <vigneshr@ti.com>, Lokesh Vutla <lokeshvutla@ti.com>, Kishon Vijay Abraham I <kishon@ti.com>, Aswath Govindraju <a-govindraju@ti.com>, Faiz Abbas <faiz_abbas@ti.com>, Sekhar Nori <nsekhar@ti.com>, Nishanth Menon <nm@ti.com>, Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>, <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org> Subject: [PATCH v6 2/3] arm64: dts: ti: k3-j7200-common-proc-board: Disable unused gpio modules Date: Fri, 19 Mar 2021 09:14:20 +0530 [thread overview] Message-ID: <20210319034422.17630-3-a-govindraju@ti.com> (raw) In-Reply-To: <20210319034422.17630-1-a-govindraju@ti.com> From: Faiz Abbas <faiz_abbas@ti.com> There are 6 gpio instances inside SoC with 2 groups as show below: Group one: wkup_gpio0, wkup_gpio1 Group two: main_gpio0, main_gpio2, main_gpio4, main_gpio6 Only one instance from each group can be used at a time. So use main_gpio0 and wkup_gpio0 in current linux context and disable the rest of the nodes. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> --- .../boot/dts/ti/k3-j7200-common-proc-board.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts index 4a7182abccf5..b493f939b09a 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts @@ -122,6 +122,22 @@ status = "disabled"; }; +&main_gpio2 { + status = "disabled"; +}; + +&main_gpio4 { + status = "disabled"; +}; + +&main_gpio6 { + status = "disabled"; +}; + +&wkup_gpio1 { + status = "disabled"; +}; + &mcu_cpsw { pinctrl-names = "default"; pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-03-19 3:45 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-03-19 3:44 [PATCH v6 0/3] J7200: Add support for GPIO and higher speed modes in MMCSD subsystems Aswath Govindraju 2021-03-19 3:44 ` Aswath Govindraju 2021-03-19 3:44 ` [PATCH v6 1/3] arm64: dts: ti: k3-j7200: Add gpio nodes Aswath Govindraju 2021-03-19 3:44 ` Aswath Govindraju 2021-03-19 3:44 ` Aswath Govindraju [this message] 2021-03-19 3:44 ` [PATCH v6 2/3] arm64: dts: ti: k3-j7200-common-proc-board: Disable unused gpio modules Aswath Govindraju 2021-03-19 3:44 ` [PATCH v6 3/3] arm64: dts: ti: k3-j7200: Add support for higher speed modes and update delay select values for MMCSD subsystems Aswath Govindraju 2021-03-19 3:44 ` Aswath Govindraju 2021-03-19 4:27 ` Kishon Vijay Abraham I 2021-03-19 4:27 ` Kishon Vijay Abraham I 2021-03-22 12:23 ` Nishanth Menon 2021-03-22 12:23 ` Nishanth Menon 2021-03-22 13:13 ` Aswath Govindraju 2021-03-22 13:13 ` Aswath Govindraju
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210319034422.17630-3-a-govindraju@ti.com \ --to=a-govindraju@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=faiz_abbas@ti.com \ --cc=kishon@ti.com \ --cc=kristo@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=lokeshvutla@ti.com \ --cc=nm@ti.com \ --cc=nsekhar@ti.com \ --cc=robh+dt@kernel.org \ --cc=vigneshr@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.