[PATCH v5 2/7] arm64: smccc: Add support for SMCCCv1.2 input/output registers

[Sudeep Holla <sudeep.holla@arm.com>]

SMCCC v1.2 allows x8-x17 to be used as parameter registers and x4—x17
to be used as result registers in SMC64/HVC64. Arm Firmware Framework
for Armv8-A specification makes use of x0-x7 as parameter and result
registers.

Current SMCCC interface in the kernel just use x0-x7 as parameter and
x0-x3 as result registers. Let us add new interface to support x0-x7
as parameter and result registers. This can be extended to include
x8-x17 when there are users for the same.

Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
 arch/arm64/kernel/asm-offsets.c |  4 +++
 arch/arm64/kernel/smccc-call.S  | 22 +++++++++++++++
 include/linux/arm-smccc.h       | 50 +++++++++++++++++++++++++++++++++
 3 files changed, 76 insertions(+)

Hi Will/Catalin,

I seemed to have missed you on these patches. I realised only when I was
collecting Acks to get this series merged. The change here is simple, it
would be good if you can review and ack if you are OK with it so that I
can get the serier merged via ARM SoC.

diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c
index a36e2fc330d4..57ffea2920b8 100644
--- a/arch/arm64/kernel/asm-offsets.c
+++ b/arch/arm64/kernel/asm-offsets.c
@@ -132,6 +132,10 @@ int main(void)
   DEFINE(ARM_SMCCC_RES_X2_OFFS,		offsetof(struct arm_smccc_res, a2));
   DEFINE(ARM_SMCCC_QUIRK_ID_OFFS,	offsetof(struct arm_smccc_quirk, id));
   DEFINE(ARM_SMCCC_QUIRK_STATE_OFFS,	offsetof(struct arm_smccc_quirk, state));
+  DEFINE(ARM_SMCCC_V1_2_RES_X0_OFFS,	offsetof(struct arm_smccc_v1_2_res, a0));
+  DEFINE(ARM_SMCCC_V1_2_RES_X2_OFFS,	offsetof(struct arm_smccc_v1_2_res, a2));
+  DEFINE(ARM_SMCCC_V1_2_RES_X4_OFFS,	offsetof(struct arm_smccc_v1_2_res, a4));
+  DEFINE(ARM_SMCCC_V1_2_RES_X6_OFFS,	offsetof(struct arm_smccc_v1_2_res, a6));
   BLANK();
   DEFINE(HIBERN_PBE_ORIG,	offsetof(struct pbe, orig_address));
   DEFINE(HIBERN_PBE_ADDR,	offsetof(struct pbe, address));
diff --git a/arch/arm64/kernel/smccc-call.S b/arch/arm64/kernel/smccc-call.S
index d62447964ed9..0ea15c1742f3 100644
--- a/arch/arm64/kernel/smccc-call.S
+++ b/arch/arm64/kernel/smccc-call.S
@@ -43,3 +43,25 @@ SYM_FUNC_START(__arm_smccc_hvc)
 	SMCCC	hvc
 SYM_FUNC_END(__arm_smccc_hvc)
 EXPORT_SYMBOL(__arm_smccc_hvc)
+
+	.macro SMCCC_v1_2 instr
+	.cfi_startproc
+	\instr #0
+	ldr x8, [sp]
+	stp x0, x1, [x8, #ARM_SMCCC_V1_2_RES_X0_OFFS]
+	stp x2, x3, [x8, #ARM_SMCCC_V1_2_RES_X2_OFFS]
+	stp x4, x5, [x8, #ARM_SMCCC_V1_2_RES_X4_OFFS]
+	stp x6, x7, [x8, #ARM_SMCCC_V1_2_RES_X6_OFFS]
+	ret
+	.cfi_endproc
+.endm
+
+SYM_FUNC_START(arm_smccc_v1_2_hvc)
+	SMCCC_v1_2 hvc
+SYM_FUNC_END(arm_smccc_v1_2_hvc)
+EXPORT_SYMBOL(arm_smccc_v1_2_hvc)
+
+SYM_FUNC_START(arm_smccc_v1_2_smc)
+	SMCCC_v1_2 smc
+SYM_FUNC_END(arm_smccc_v1_2_smc)
+EXPORT_SYMBOL(arm_smccc_v1_2_smc)
diff --git a/include/linux/arm-smccc.h b/include/linux/arm-smccc.h
index 62c54234576c..0b8fa285a054 100644
--- a/include/linux/arm-smccc.h
+++ b/include/linux/arm-smccc.h
@@ -186,6 +186,56 @@ struct arm_smccc_res {
 	unsigned long a3;
 };
 
+#ifdef CONFIG_ARM64
+/* TODO Need to implement for ARM too */
+/**
+ * struct arm_smccc_v1_2_res - Result from SMC/HVC call
+ * @a0-a7 result values from registers 0 to 7
+ */
+struct arm_smccc_v1_2_res {
+	unsigned long a0;
+	unsigned long a1;
+	unsigned long a2;
+	unsigned long a3;
+	unsigned long a4;
+	unsigned long a5;
+	unsigned long a6;
+	unsigned long a7;
+};
+
+/**
+ * arm_smccc_v1_2_hvc() - make HVC calls
+ * @a0-a7: arguments passed in registers 0 to 7
+ * @res: result values from registers 0 to 7
+ *
+ * This function is used to make HVC calls following SMC Calling Convention
+ * v1.2 or above. The content of the supplied param are copied to registers
+ * 0 to 7 prior to the HVC instruction. The return values are updated with
+ * the content from register 0 to 7 on return from the HVC instruction.
+ */
+asmlinkage
+void arm_smccc_v1_2_hvc(unsigned long a0, unsigned long a1, unsigned long a2,
+			unsigned long a3, unsigned long a4, unsigned long a5,
+			unsigned long a6, unsigned long a7,
+			struct arm_smccc_v1_2_res  *res);
+
+/**
+ * arm_smccc_v1_2_smc() - make SMC calls
+ * @a0-a7: arguments passed in registers 0 to 7
+ * @res: result values from registers 0 to 7
+ *
+ * This function is used to make SMC calls following SMC Calling Convention
+ * v1.2 or above. The content of the supplied param are copied to registers
+ * 0 to 7 prior to the SMC instruction. The return values are updated with
+ * the content from register 0 to 7 on return from the SMC instruction.
+ */
+asmlinkage
+void arm_smccc_v1_2_smc(unsigned long a0, unsigned long a1, unsigned long a2,
+			unsigned long a3, unsigned long a4, unsigned long a5,
+			unsigned long a6, unsigned long a7,
+			struct arm_smccc_v1_2_res  *res);
+#endif
+
 /**
  * struct arm_smccc_quirk - Contains quirk information
  * @id: quirk identification
-- 
2.25.1