All of lore.kernel.org
 help / color / mirror / Atom feed
From: Allison Henderson <allison.henderson@oracle.com>
To: linux-xfs@vger.kernel.org
Subject: [PATCH v16 07/11] xfs: Hoist xfs_attr_node_addname
Date: Thu, 25 Mar 2021 17:33:04 -0700	[thread overview]
Message-ID: <20210326003308.32753-8-allison.henderson@oracle.com> (raw)
In-Reply-To: <20210326003308.32753-1-allison.henderson@oracle.com>

This patch hoists the later half of xfs_attr_node_addname into
the calling function.  We do this because it is this area that
will need the most state management, and we want to keep such
code in the same scope as much as possible

Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
---
 fs/xfs/libxfs/xfs_attr.c | 161 +++++++++++++++++++++++------------------------
 1 file changed, 78 insertions(+), 83 deletions(-)

diff --git a/fs/xfs/libxfs/xfs_attr.c b/fs/xfs/libxfs/xfs_attr.c
index 16159f6..5b5410f 100644
--- a/fs/xfs/libxfs/xfs_attr.c
+++ b/fs/xfs/libxfs/xfs_attr.c
@@ -52,6 +52,7 @@ STATIC int xfs_attr_leaf_hasname(struct xfs_da_args *args, struct xfs_buf **bp);
  * Internal routines when attribute list is more than one block.
  */
 STATIC int xfs_attr_node_get(xfs_da_args_t *args);
+STATIC void xfs_attr_restore_rmt_blk(struct xfs_da_args *args);
 STATIC int xfs_attr_node_addname(struct xfs_da_args *args,
 				 struct xfs_da_state *state);
 STATIC int xfs_attr_node_addname_find_attr(struct xfs_da_args *args,
@@ -270,8 +271,8 @@ xfs_attr_set_args(
 	struct xfs_da_args	*args)
 {
 	struct xfs_inode	*dp = args->dp;
-	struct xfs_da_state     *state;
-	int			error;
+	struct xfs_da_state     *state = NULL;
+	int			error = 0;
 
 	/*
 	 * If the attribute list is already in leaf format, jump straight to
@@ -322,8 +323,79 @@ xfs_attr_set_args(
 			return error;
 		error = xfs_attr_node_addname(args, state);
 	} while (error == -EAGAIN);
+	if (error)
+		return error;
+
+	/*
+	 * Commit the leaf addition or btree split and start the next
+	 * trans in the chain.
+	 */
+	error = xfs_trans_roll_inode(&args->trans, dp);
+	if (error)
+		goto out;
+
+	/*
+	 * If there was an out-of-line value, allocate the blocks we
+	 * identified for its storage and copy the value.  This is done
+	 * after we create the attribute so that we don't overflow the
+	 * maximum size of a transaction and/or hit a deadlock.
+	 */
+	if (args->rmtblkno > 0) {
+		error = xfs_attr_rmtval_set(args);
+		if (error)
+			return error;
+	}
+
+	if (!(args->op_flags & XFS_DA_OP_RENAME)) {
+		/*
+		 * Added a "remote" value, just clear the incomplete flag.
+		 */
+		if (args->rmtblkno > 0)
+			error = xfs_attr3_leaf_clearflag(args);
+		goto out;
+	}
+
+	/*
+	 * If this is an atomic rename operation, we must "flip" the incomplete
+	 * flags on the "new" and "old" attribute/value pairs so that one
+	 * disappears and one appears atomically.  Then we must remove the "old"
+	 * attribute/value pair.
+	 *
+	 * In a separate transaction, set the incomplete flag on the "old" attr
+	 * and clear the incomplete flag on the "new" attr.
+	 */
+	error = xfs_attr3_leaf_flipflags(args);
+	if (error)
+		goto out;
+	/*
+	 * Commit the flag value change and start the next trans in series
+	 */
+	error = xfs_trans_roll_inode(&args->trans, args->dp);
+	if (error)
+		goto out;
 
+	/*
+	 * Dismantle the "old" attribute/value pair by removing a "remote" value
+	 * (if it exists).
+	 */
+	xfs_attr_restore_rmt_blk(args);
+
+	if (args->rmtblkno) {
+		error = xfs_attr_rmtval_invalidate(args);
+		if (error)
+			return error;
+
+		error = xfs_attr_rmtval_remove(args);
+		if (error)
+			return error;
+	}
+
+	error = xfs_attr_node_addname_clear_incomplete(args);
+out:
+	if (state)
+		xfs_da_state_free(state);
 	return error;
+
 }
 
 /*
@@ -957,7 +1029,7 @@ xfs_attr_node_addname(
 {
 	struct xfs_da_state_blk	*blk;
 	struct xfs_inode	*dp;
-	int			retval, error;
+	int			error;
 
 	trace_xfs_attr_node_addname(args);
 
@@ -965,8 +1037,8 @@ xfs_attr_node_addname(
 	blk = &state->path.blk[state->path.active-1];
 	ASSERT(blk->magic == XFS_ATTR_LEAF_MAGIC);
 
-	retval = xfs_attr3_leaf_add(blk->bp, state->args);
-	if (retval == -ENOSPC) {
+	error = xfs_attr3_leaf_add(blk->bp, state->args);
+	if (error == -ENOSPC) {
 		if (state->path.active == 1) {
 			/*
 			 * Its really a single leaf node, but it had
@@ -1012,85 +1084,8 @@ xfs_attr_node_addname(
 		xfs_da3_fixhashpath(state, &state->path);
 	}
 
-	/*
-	 * Kill the state structure, we're done with it and need to
-	 * allow the buffers to come back later.
-	 */
-	xfs_da_state_free(state);
-	state = NULL;
-
-	/*
-	 * Commit the leaf addition or btree split and start the next
-	 * trans in the chain.
-	 */
-	error = xfs_trans_roll_inode(&args->trans, dp);
-	if (error)
-		goto out;
-
-	/*
-	 * If there was an out-of-line value, allocate the blocks we
-	 * identified for its storage and copy the value.  This is done
-	 * after we create the attribute so that we don't overflow the
-	 * maximum size of a transaction and/or hit a deadlock.
-	 */
-	if (args->rmtblkno > 0) {
-		error = xfs_attr_rmtval_set(args);
-		if (error)
-			return error;
-	}
-
-	if (!(args->op_flags & XFS_DA_OP_RENAME)) {
-		/*
-		 * Added a "remote" value, just clear the incomplete flag.
-		 */
-		if (args->rmtblkno > 0)
-			error = xfs_attr3_leaf_clearflag(args);
-		retval = error;
-		goto out;
-	}
-
-	/*
-	 * If this is an atomic rename operation, we must "flip" the incomplete
-	 * flags on the "new" and "old" attribute/value pairs so that one
-	 * disappears and one appears atomically.  Then we must remove the "old"
-	 * attribute/value pair.
-	 *
-	 * In a separate transaction, set the incomplete flag on the "old" attr
-	 * and clear the incomplete flag on the "new" attr.
-	 */
-	error = xfs_attr3_leaf_flipflags(args);
-	if (error)
-		goto out;
-	/*
-	 * Commit the flag value change and start the next trans in series
-	 */
-	error = xfs_trans_roll_inode(&args->trans, args->dp);
-	if (error)
-		goto out;
-
-	/*
-	 * Dismantle the "old" attribute/value pair by removing a "remote" value
-	 * (if it exists).
-	 */
-	xfs_attr_restore_rmt_blk(args);
-
-	if (args->rmtblkno) {
-		error = xfs_attr_rmtval_invalidate(args);
-		if (error)
-			return error;
-
-		error = xfs_attr_rmtval_remove(args);
-		if (error)
-			return error;
-	}
-
-	error = xfs_attr_node_addname_clear_incomplete(args);
 out:
-	if (state)
-		xfs_da_state_free(state);
-	if (error)
-		return error;
-	return retval;
+	return error;
 }
 
 
-- 
2.7.4


  parent reply	other threads:[~2021-03-26  0:34 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-26  0:32 [PATCH v16 00/11] xfs: Delay Ready Attributes Allison Henderson
2021-03-26  0:32 ` [PATCH v16 01/11] xfs: Reverse apply 72b97ea40d Allison Henderson
2021-03-29  8:44   ` Chandan Babu R
2021-04-02  9:47     ` Allison Henderson
2021-04-01 15:43   ` Brian Foster
2021-04-02  9:49     ` Allison Henderson
2021-03-26  0:32 ` [PATCH v16 02/11] xfs: Add xfs_attr_node_remove_cleanup Allison Henderson
2021-03-26  0:33 ` [PATCH v16 03/11] xfs: Hoist xfs_attr_set_shortform Allison Henderson
2021-03-29  9:21   ` Chandan Babu R
2021-04-02  9:47     ` Allison Henderson
2021-03-26  0:33 ` [PATCH v16 04/11] xfs: Add helper xfs_attr_set_fmt Allison Henderson
2021-03-29  9:37   ` Chandan Babu R
2021-04-02  9:47     ` Allison Henderson
2021-03-26  0:33 ` [PATCH v16 05/11] xfs: Separate xfs_attr_node_addname and xfs_attr_node_addname_clear_incomplete Allison Henderson
2021-03-29 14:42   ` Chandan Babu R
2021-04-02  9:00     ` Allison Henderson
2021-03-26  0:33 ` [PATCH v16 06/11] xfs: Add helper xfs_attr_node_addname_find_attr Allison Henderson
2021-04-02  4:05   ` Chandan Babu R
2021-04-02  9:50     ` Allison Henderson
2021-03-26  0:33 ` Allison Henderson [this message]
2021-04-02  4:26   ` [PATCH v16 07/11] xfs: Hoist xfs_attr_node_addname Chandan Babu R
2021-04-02  9:01     ` Allison Henderson
2021-03-26  0:33 ` [PATCH v16 08/11] xfs: Hoist xfs_attr_leaf_addname Allison Henderson
2021-04-01 15:43   ` Brian Foster
2021-04-02  9:01     ` Allison Henderson
2021-04-05 13:15       ` Brian Foster
2021-04-02  4:40   ` Chandan Babu R
2021-04-02  9:50     ` Allison Henderson
2021-03-26  0:33 ` [PATCH v16 09/11] xfs: Hoist node transaction handling Allison Henderson
2021-04-02  5:04   ` Chandan Babu R
2021-04-02  9:51     ` Allison Henderson
2021-03-26  0:33 ` [PATCH v16 10/11] xfs: Add delay ready attr remove routines Allison Henderson
2021-04-01 16:55   ` Brian Foster
2021-04-02  9:42     ` Allison Henderson
2021-04-05 13:15       ` Brian Foster
2021-04-02  7:59   ` Chandan Babu R
2021-04-02  9:45     ` Allison Henderson
2021-03-26  0:33 ` [PATCH v16 11/11] xfs: Add delay ready attr set routines Allison Henderson
2021-04-01 16:57   ` Brian Foster
2021-04-02  9:01     ` Allison Henderson
2021-04-05 13:17       ` Brian Foster
2021-04-14 18:14         ` Allison Henderson
2021-03-29 21:59 ` [PATCH v16 00/11] xfs: Delay Ready Attributes Darrick J. Wong
2021-04-02  9:49   ` Allison Henderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210326003308.32753-8-allison.henderson@oracle.com \
    --to=allison.henderson@oracle.com \
    --cc=linux-xfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.