From: Jim Quinlan <jim2101024@gmail.com> To: linux-pci@vger.kernel.org, Nicolas Saenz Julienne <nsaenzjulienne@suse.de>, Rob Herring <robh@kernel.org>, Mark Brown <broonie@kernel.org>, bcm-kernel-feedback-list@broadcom.com, jim2101024@gmail.com, james.quinlan@broadcom.com Cc: devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS), Florian Fainelli <f.fainelli@gmail.com>, Jim Quinlan <jquinlan@broadcom.com>, linux-arm-kernel@lists.infradead.org (moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE), linux-kernel@vger.kernel.org (open list), linux-rpi-kernel@lists.infradead.org (moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE), Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Subject: [PATCH v3 0/6] PCI: brcmstb: add EP regulators and panic handler Date: Fri, 26 Mar 2021 15:18:58 -0400 [thread overview] Message-ID: <20210326191906.43567-1-jim2101024@gmail.com> (raw) v3 -- Driver now searches for EP DT subnode for any regulators to turn on. If present, these regulators have the property names "vpcie12v-supply" and "vpcie3v3-supply". The existence of these regulators in the EP subnode are currently pending as a pullreq in pci-bus.yaml at https://github.com/devicetree-org/dt-schema/pull/54 (MarkB, RobH). -- Check return of brcm_set_regulators() (Florian) -- Specify one regulator string per line for easier update (Florian) -- Author/Committer/Signoff email changed from that of V2 from 'james.quinlan@broadcom.com' to 'jim2101024@gmail.com'. v2 -- Use regulator bulk API rather than multiple calls (MarkB). v1 -- Bindings are added for fixed regulators that may power the EP device. -- The brcmstb RC driver is modified to control these regulators during probe, suspend, and resume. -- 7216 type SOCs have additional error reporting HW and a panic handler is added to dump its info. -- A missing return value check is added. Jim Quinlan (6): dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators PCI: brcmstb: Add control of EP voltage regulators PCI: brcmstb: Do not turn off regulators if EP can wake up PCI: brcmstb: Give 7216 SOCs their own config type PCI: brcmstb: Add panic/die handler to RC driver PCI: brcmstb: Check return value of clk_prepare_enable() .../bindings/pci/brcm,stb-pcie.yaml | 6 + drivers/pci/controller/pcie-brcmstb.c | 271 +++++++++++++++++- 2 files changed, 272 insertions(+), 5 deletions(-) -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Jim Quinlan <jim2101024@gmail.com> To: linux-pci@vger.kernel.org, Nicolas Saenz Julienne <nsaenzjulienne@suse.de>, Rob Herring <robh@kernel.org>, Mark Brown <broonie@kernel.org>, bcm-kernel-feedback-list@broadcom.com, jim2101024@gmail.com, james.quinlan@broadcom.com Cc: devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS), Florian Fainelli <f.fainelli@gmail.com>, Jim Quinlan <jquinlan@broadcom.com>, linux-arm-kernel@lists.infradead.org (moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE), linux-kernel@vger.kernel.org (open list), linux-rpi-kernel@lists.infradead.org (moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE), Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Subject: [PATCH v3 0/6] PCI: brcmstb: add EP regulators and panic handler Date: Fri, 26 Mar 2021 15:18:58 -0400 [thread overview] Message-ID: <20210326191906.43567-1-jim2101024@gmail.com> (raw) v3 -- Driver now searches for EP DT subnode for any regulators to turn on. If present, these regulators have the property names "vpcie12v-supply" and "vpcie3v3-supply". The existence of these regulators in the EP subnode are currently pending as a pullreq in pci-bus.yaml at https://github.com/devicetree-org/dt-schema/pull/54 (MarkB, RobH). -- Check return of brcm_set_regulators() (Florian) -- Specify one regulator string per line for easier update (Florian) -- Author/Committer/Signoff email changed from that of V2 from 'james.quinlan@broadcom.com' to 'jim2101024@gmail.com'. v2 -- Use regulator bulk API rather than multiple calls (MarkB). v1 -- Bindings are added for fixed regulators that may power the EP device. -- The brcmstb RC driver is modified to control these regulators during probe, suspend, and resume. -- 7216 type SOCs have additional error reporting HW and a panic handler is added to dump its info. -- A missing return value check is added. Jim Quinlan (6): dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators PCI: brcmstb: Add control of EP voltage regulators PCI: brcmstb: Do not turn off regulators if EP can wake up PCI: brcmstb: Give 7216 SOCs their own config type PCI: brcmstb: Add panic/die handler to RC driver PCI: brcmstb: Check return value of clk_prepare_enable() .../bindings/pci/brcm,stb-pcie.yaml | 6 + drivers/pci/controller/pcie-brcmstb.c | 271 +++++++++++++++++- 2 files changed, 272 insertions(+), 5 deletions(-) -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-03-26 19:19 UTC|newest] Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-03-26 19:18 Jim Quinlan [this message] 2021-03-26 19:18 ` [PATCH v3 0/6] PCI: brcmstb: add EP regulators and panic handler Jim Quinlan 2021-03-26 19:18 ` [PATCH v3 1/6] dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators Jim Quinlan 2021-03-26 19:18 ` Jim Quinlan 2021-03-27 15:58 ` Rob Herring 2021-03-27 15:58 ` Rob Herring 2021-03-30 15:08 ` Rob Herring 2021-03-30 15:08 ` Rob Herring 2021-03-30 15:30 ` Mark Brown 2021-03-30 15:30 ` Mark Brown 2021-03-30 16:23 ` Jim Quinlan 2021-03-30 16:23 ` Jim Quinlan 2021-03-31 11:46 ` Mark Brown 2021-03-31 11:46 ` Mark Brown 2021-03-26 19:19 ` [PATCH v3 2/6] PCI: brcmstb: Add control of " Jim Quinlan 2021-03-26 19:19 ` Jim Quinlan 2021-03-26 20:11 ` Bjorn Helgaas 2021-03-26 20:11 ` Bjorn Helgaas 2021-03-27 22:20 ` Jim Quinlan 2021-03-27 22:20 ` Jim Quinlan 2021-03-29 16:19 ` Mark Brown 2021-03-29 16:19 ` Mark Brown 2021-03-29 16:25 ` Mark Brown 2021-03-29 16:25 ` Mark Brown 2021-03-29 16:39 ` Jim Quinlan 2021-03-29 16:39 ` Jim Quinlan 2021-03-29 17:16 ` Mark Brown 2021-03-29 17:16 ` Mark Brown 2021-03-29 19:48 ` Jim Quinlan 2021-03-29 19:48 ` Jim Quinlan 2021-03-29 20:45 ` Mark Brown 2021-03-29 20:45 ` Mark Brown 2021-03-29 21:09 ` Florian Fainelli 2021-03-29 21:09 ` Florian Fainelli 2021-03-29 21:31 ` Mark Brown 2021-03-29 21:31 ` Mark Brown 2021-03-26 19:19 ` [PATCH v3 3/6] PCI: brcmstb: Do not turn off regulators if EP can wake up Jim Quinlan 2021-03-26 19:19 ` Jim Quinlan 2021-03-26 20:17 ` Bjorn Helgaas 2021-03-26 20:17 ` Bjorn Helgaas 2021-03-26 19:19 ` [PATCH v3 4/6] PCI: brcmstb: Give 7216 SOCs their own config type Jim Quinlan 2021-03-26 19:19 ` Jim Quinlan 2021-03-26 19:19 ` [PATCH v3 5/6] PCI: brcmstb: Add panic/die handler to RC driver Jim Quinlan 2021-03-26 19:19 ` Jim Quinlan 2021-03-26 19:19 ` [PATCH v3 6/6] PCI: brcmstb: Check return value of clk_prepare_enable() Jim Quinlan 2021-03-26 19:19 ` Jim Quinlan 2021-03-26 20:31 ` Bjorn Helgaas 2021-03-26 20:31 ` Bjorn Helgaas
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210326191906.43567-1-jim2101024@gmail.com \ --to=jim2101024@gmail.com \ --cc=bcm-kernel-feedback-list@broadcom.com \ --cc=broonie@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=f.fainelli@gmail.com \ --cc=james.quinlan@broadcom.com \ --cc=jquinlan@broadcom.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pci@vger.kernel.org \ --cc=linux-rpi-kernel@lists.infradead.org \ --cc=lorenzo.pieralisi@arm.com \ --cc=nsaenzjulienne@suse.de \ --cc=robh@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.