* [PATCH 0/2] dt-bindings: usb: dwc3-imx8mp: Use the correct name for child node "snps,dwc3"
@ 2021-03-29 7:27 ` Zhen Lei
0 siblings, 0 replies; 10+ messages in thread
From: Zhen Lei @ 2021-03-29 7:27 UTC (permalink / raw)
To: Greg Kroah-Hartman, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
linux-usb, devicetree, linux-arm-kernel, linux-kernel
Cc: Zhen Lei
File snps,dwc3.yaml describes the schema of Synopsys DesignWare USB3
Controller, it directly or indirectly contains "$ref: usb.yaml". So the
node name of "snps,dwc3" must start with "usb". Otherwise, the following
warning will be displayed:
Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.example.dt.yaml: \
dwc3@38100000: $nodename:0: 'dwc3@38100000' does not match '^usb(@.*)?'
From schema: Documentation/devicetree/bindings/usb/snps,dwc3.yaml
Zhen Lei (2):
dt-bindings: usb: dwc3-imx8mp: Use the correct name for child node
"snps,dwc3"
arm64: dts: imx8mp: Use the correct name for child node "snps,dwc3"
Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml | 9 +++------
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 4 ++--
2 files changed, 5 insertions(+), 8 deletions(-)
--
1.8.3
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 0/2] dt-bindings: usb: dwc3-imx8mp: Use the correct name for child node "snps, dwc3"
@ 2021-03-29 7:27 ` Zhen Lei
0 siblings, 0 replies; 10+ messages in thread
From: Zhen Lei @ 2021-03-29 7:27 UTC (permalink / raw)
To: Greg Kroah-Hartman, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
linux-usb, devicetree, linux-arm-kernel, linux-kernel
Cc: Zhen Lei
File snps,dwc3.yaml describes the schema of Synopsys DesignWare USB3
Controller, it directly or indirectly contains "$ref: usb.yaml". So the
node name of "snps,dwc3" must start with "usb". Otherwise, the following
warning will be displayed:
Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.example.dt.yaml: \
dwc3@38100000: $nodename:0: 'dwc3@38100000' does not match '^usb(@.*)?'
From schema: Documentation/devicetree/bindings/usb/snps,dwc3.yaml
Zhen Lei (2):
dt-bindings: usb: dwc3-imx8mp: Use the correct name for child node
"snps,dwc3"
arm64: dts: imx8mp: Use the correct name for child node "snps,dwc3"
Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml | 9 +++------
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 4 ++--
2 files changed, 5 insertions(+), 8 deletions(-)
--
1.8.3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 1/2] dt-bindings: usb: dwc3-imx8mp: Use the correct name for child node "snps,dwc3"
2021-03-29 7:27 ` [PATCH 0/2] dt-bindings: usb: dwc3-imx8mp: Use the correct name for child node "snps, dwc3" Zhen Lei
@ 2021-03-29 7:27 ` Zhen Lei
-1 siblings, 0 replies; 10+ messages in thread
From: Zhen Lei @ 2021-03-29 7:27 UTC (permalink / raw)
To: Greg Kroah-Hartman, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
linux-usb, devicetree, linux-arm-kernel, linux-kernel
Cc: Zhen Lei
File snps,dwc3.yaml describes the schema of Synopsys DesignWare USB3
Controller, it directly or indirectly contains "$ref: usb.yaml". So the
node name of "snps,dwc3" must start with "usb". Otherwise, the following
warning will be displayed:
Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.example.dt.yaml: \
dwc3@38100000: $nodename:0: 'dwc3@38100000' does not match '^usb(@.*)?'
From schema: Documentation/devicetree/bindings/usb/snps,dwc3.yaml
In addition, replace "type: object" with "$ref: snps,dwc3.yaml#". Ensure
that all properties of the child node comply with snps,dwc3.yaml.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
index cb4c6f6d3a33a3f..974032b1fda04fb 100644
--- a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
@@ -52,11 +52,8 @@ properties:
# Required child node:
patternProperties:
- "^dwc3@[0-9a-f]+$":
- type: object
- description:
- A child node must exist to represent the core DWC3 IP block
- The content of the node is defined in dwc3.txt.
+ "^usb@[0-9a-f]+$":
+ $ref: snps,dwc3.yaml#
required:
- compatible
@@ -87,7 +84,7 @@ examples:
dma-ranges = <0x40000000 0x40000000 0xc0000000>;
ranges;
- dwc3@38100000 {
+ usb@38100000 {
compatible = "snps,dwc3";
reg = <0x38100000 0x10000>;
clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
--
1.8.3
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 1/2] dt-bindings: usb: dwc3-imx8mp: Use the correct name for child node "snps, dwc3"
@ 2021-03-29 7:27 ` Zhen Lei
0 siblings, 0 replies; 10+ messages in thread
From: Zhen Lei @ 2021-03-29 7:27 UTC (permalink / raw)
To: Greg Kroah-Hartman, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
linux-usb, devicetree, linux-arm-kernel, linux-kernel
Cc: Zhen Lei
File snps,dwc3.yaml describes the schema of Synopsys DesignWare USB3
Controller, it directly or indirectly contains "$ref: usb.yaml". So the
node name of "snps,dwc3" must start with "usb". Otherwise, the following
warning will be displayed:
Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.example.dt.yaml: \
dwc3@38100000: $nodename:0: 'dwc3@38100000' does not match '^usb(@.*)?'
From schema: Documentation/devicetree/bindings/usb/snps,dwc3.yaml
In addition, replace "type: object" with "$ref: snps,dwc3.yaml#". Ensure
that all properties of the child node comply with snps,dwc3.yaml.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
index cb4c6f6d3a33a3f..974032b1fda04fb 100644
--- a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
@@ -52,11 +52,8 @@ properties:
# Required child node:
patternProperties:
- "^dwc3@[0-9a-f]+$":
- type: object
- description:
- A child node must exist to represent the core DWC3 IP block
- The content of the node is defined in dwc3.txt.
+ "^usb@[0-9a-f]+$":
+ $ref: snps,dwc3.yaml#
required:
- compatible
@@ -87,7 +84,7 @@ examples:
dma-ranges = <0x40000000 0x40000000 0xc0000000>;
ranges;
- dwc3@38100000 {
+ usb@38100000 {
compatible = "snps,dwc3";
reg = <0x38100000 0x10000>;
clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
--
1.8.3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/2] arm64: dts: imx8mp: Use the correct name for child node "snps,dwc3"
2021-03-29 7:27 ` [PATCH 0/2] dt-bindings: usb: dwc3-imx8mp: Use the correct name for child node "snps, dwc3" Zhen Lei
@ 2021-03-29 7:27 ` Zhen Lei
-1 siblings, 0 replies; 10+ messages in thread
From: Zhen Lei @ 2021-03-29 7:27 UTC (permalink / raw)
To: Greg Kroah-Hartman, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
linux-usb, devicetree, linux-arm-kernel, linux-kernel
Cc: Zhen Lei
After the node name of "snps,dwc3" has been corrected to start with "usb"
in fsl,imx8mp-dwc3.yaml. Its name in dts should be modified accordingly.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index c7523fd4eae9b53..4967d72f41f613f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -828,7 +828,7 @@
ranges;
status = "disabled";
- usb_dwc3_0: dwc3@38100000 {
+ usb_dwc3_0: usb@38100000 {
compatible = "snps,dwc3";
reg = <0x38100000 0x10000>;
clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
@@ -869,7 +869,7 @@
ranges;
status = "disabled";
- usb_dwc3_1: dwc3@38200000 {
+ usb_dwc3_1: usb@38200000 {
compatible = "snps,dwc3";
reg = <0x38200000 0x10000>;
clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
--
1.8.3
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/2] arm64: dts: imx8mp: Use the correct name for child node "snps, dwc3"
@ 2021-03-29 7:27 ` Zhen Lei
0 siblings, 0 replies; 10+ messages in thread
From: Zhen Lei @ 2021-03-29 7:27 UTC (permalink / raw)
To: Greg Kroah-Hartman, Rob Herring, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
linux-usb, devicetree, linux-arm-kernel, linux-kernel
Cc: Zhen Lei
After the node name of "snps,dwc3" has been corrected to start with "usb"
in fsl,imx8mp-dwc3.yaml. Its name in dts should be modified accordingly.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index c7523fd4eae9b53..4967d72f41f613f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -828,7 +828,7 @@
ranges;
status = "disabled";
- usb_dwc3_0: dwc3@38100000 {
+ usb_dwc3_0: usb@38100000 {
compatible = "snps,dwc3";
reg = <0x38100000 0x10000>;
clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
@@ -869,7 +869,7 @@
ranges;
status = "disabled";
- usb_dwc3_1: dwc3@38200000 {
+ usb_dwc3_1: usb@38200000 {
compatible = "snps,dwc3";
reg = <0x38200000 0x10000>;
clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
--
1.8.3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 1/2] dt-bindings: usb: dwc3-imx8mp: Use the correct name for child node "snps, dwc3"
2021-03-29 7:27 ` [PATCH 1/2] dt-bindings: usb: dwc3-imx8mp: Use the correct name for child node "snps, dwc3" Zhen Lei
@ 2021-03-30 22:03 ` Rob Herring
-1 siblings, 0 replies; 10+ messages in thread
From: Rob Herring @ 2021-03-30 22:03 UTC (permalink / raw)
To: Zhen Lei
Cc: Fabio Estevam, devicetree, linux-usb, Pengutronix Kernel Team,
Rob Herring, Sascha Hauer, NXP Linux Team, linux-arm-kernel,
Shawn Guo, Greg Kroah-Hartman, linux-kernel
On Mon, 29 Mar 2021 15:27:13 +0800, Zhen Lei wrote:
> File snps,dwc3.yaml describes the schema of Synopsys DesignWare USB3
> Controller, it directly or indirectly contains "$ref: usb.yaml". So the
> node name of "snps,dwc3" must start with "usb". Otherwise, the following
> warning will be displayed:
>
> Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.example.dt.yaml: \
> dwc3@38100000: $nodename:0: 'dwc3@38100000' does not match '^usb(@.*)?'
> From schema: Documentation/devicetree/bindings/usb/snps,dwc3.yaml
>
> In addition, replace "type: object" with "$ref: snps,dwc3.yaml#". Ensure
> that all properties of the child node comply with snps,dwc3.yaml.
>
> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
> ---
> Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml | 9 +++------
> 1 file changed, 3 insertions(+), 6 deletions(-)
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 1/2] dt-bindings: usb: dwc3-imx8mp: Use the correct name for child node "snps, dwc3"
@ 2021-03-30 22:03 ` Rob Herring
0 siblings, 0 replies; 10+ messages in thread
From: Rob Herring @ 2021-03-30 22:03 UTC (permalink / raw)
To: Zhen Lei
Cc: Fabio Estevam, devicetree, linux-usb, Pengutronix Kernel Team,
Rob Herring, Sascha Hauer, NXP Linux Team, linux-arm-kernel,
Shawn Guo, Greg Kroah-Hartman, linux-kernel
On Mon, 29 Mar 2021 15:27:13 +0800, Zhen Lei wrote:
> File snps,dwc3.yaml describes the schema of Synopsys DesignWare USB3
> Controller, it directly or indirectly contains "$ref: usb.yaml". So the
> node name of "snps,dwc3" must start with "usb". Otherwise, the following
> warning will be displayed:
>
> Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.example.dt.yaml: \
> dwc3@38100000: $nodename:0: 'dwc3@38100000' does not match '^usb(@.*)?'
> From schema: Documentation/devicetree/bindings/usb/snps,dwc3.yaml
>
> In addition, replace "type: object" with "$ref: snps,dwc3.yaml#". Ensure
> that all properties of the child node comply with snps,dwc3.yaml.
>
> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
> ---
> Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml | 9 +++------
> 1 file changed, 3 insertions(+), 6 deletions(-)
>
Acked-by: Rob Herring <robh@kernel.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 0/2] dt-bindings: usb: dwc3-imx8mp: Use the correct name for child node "snps,dwc3"
2021-03-29 7:27 ` [PATCH 0/2] dt-bindings: usb: dwc3-imx8mp: Use the correct name for child node "snps, dwc3" Zhen Lei
@ 2021-04-26 1:21 ` Shawn Guo
-1 siblings, 0 replies; 10+ messages in thread
From: Shawn Guo @ 2021-04-26 1:21 UTC (permalink / raw)
To: Zhen Lei
Cc: Greg Kroah-Hartman, Rob Herring, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
linux-usb, devicetree, linux-arm-kernel, linux-kernel
On Mon, Mar 29, 2021 at 03:27:12PM +0800, Zhen Lei wrote:
> File snps,dwc3.yaml describes the schema of Synopsys DesignWare USB3
> Controller, it directly or indirectly contains "$ref: usb.yaml". So the
> node name of "snps,dwc3" must start with "usb". Otherwise, the following
> warning will be displayed:
>
> Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.example.dt.yaml: \
> dwc3@38100000: $nodename:0: 'dwc3@38100000' does not match '^usb(@.*)?'
> From schema: Documentation/devicetree/bindings/usb/snps,dwc3.yaml
>
>
> Zhen Lei (2):
> dt-bindings: usb: dwc3-imx8mp: Use the correct name for child node
> "snps,dwc3"
> arm64: dts: imx8mp: Use the correct name for child node "snps,dwc3"
Applied both, thanks.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 0/2] dt-bindings: usb: dwc3-imx8mp: Use the correct name for child node "snps,dwc3"
@ 2021-04-26 1:21 ` Shawn Guo
0 siblings, 0 replies; 10+ messages in thread
From: Shawn Guo @ 2021-04-26 1:21 UTC (permalink / raw)
To: Zhen Lei
Cc: Greg Kroah-Hartman, Rob Herring, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
linux-usb, devicetree, linux-arm-kernel, linux-kernel
On Mon, Mar 29, 2021 at 03:27:12PM +0800, Zhen Lei wrote:
> File snps,dwc3.yaml describes the schema of Synopsys DesignWare USB3
> Controller, it directly or indirectly contains "$ref: usb.yaml". So the
> node name of "snps,dwc3" must start with "usb". Otherwise, the following
> warning will be displayed:
>
> Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.example.dt.yaml: \
> dwc3@38100000: $nodename:0: 'dwc3@38100000' does not match '^usb(@.*)?'
> From schema: Documentation/devicetree/bindings/usb/snps,dwc3.yaml
>
>
> Zhen Lei (2):
> dt-bindings: usb: dwc3-imx8mp: Use the correct name for child node
> "snps,dwc3"
> arm64: dts: imx8mp: Use the correct name for child node "snps,dwc3"
Applied both, thanks.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2021-04-26 1:23 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-29 7:27 [PATCH 0/2] dt-bindings: usb: dwc3-imx8mp: Use the correct name for child node "snps,dwc3" Zhen Lei
2021-03-29 7:27 ` [PATCH 0/2] dt-bindings: usb: dwc3-imx8mp: Use the correct name for child node "snps, dwc3" Zhen Lei
2021-03-29 7:27 ` [PATCH 1/2] dt-bindings: usb: dwc3-imx8mp: Use the correct name for child node "snps,dwc3" Zhen Lei
2021-03-29 7:27 ` [PATCH 1/2] dt-bindings: usb: dwc3-imx8mp: Use the correct name for child node "snps, dwc3" Zhen Lei
2021-03-30 22:03 ` Rob Herring
2021-03-30 22:03 ` Rob Herring
2021-03-29 7:27 ` [PATCH 2/2] arm64: dts: imx8mp: Use the correct name for child node "snps,dwc3" Zhen Lei
2021-03-29 7:27 ` [PATCH 2/2] arm64: dts: imx8mp: Use the correct name for child node "snps, dwc3" Zhen Lei
2021-04-26 1:21 ` [PATCH 0/2] dt-bindings: usb: dwc3-imx8mp: Use the correct name for child node "snps,dwc3" Shawn Guo
2021-04-26 1:21 ` Shawn Guo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.