From: Marc Kleine-Budde <mkl@pengutronix.de>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, kuba@kernel.org, linux-can@vger.kernel.org,
kernel@pengutronix.de, Wan Jiabing <wanjiabing@vivo.com>,
Marc Kleine-Budde <mkl@pengutronix.de>
Subject: [net-next 21/39] can: tcan4x5x: remove duplicate include of regmap.h
Date: Tue, 30 Mar 2021 13:45:41 +0200 [thread overview]
Message-ID: <20210330114559.1114855-22-mkl@pengutronix.de> (raw)
In-Reply-To: <20210330114559.1114855-1-mkl@pengutronix.de>
From: Wan Jiabing <wanjiabing@vivo.com>
linux/regmap.h has been included at line 13, so remove the duplicate
one at line 14.
Fixes: 67def4ef8bb9 ("can: tcan4x5x: move regmap code into seperate file")
Link: https://lore.kernel.org/r/20210323021026.140460-1-wanjiabing@vivo.com
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
drivers/net/can/m_can/tcan4x5x.h | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/net/can/m_can/tcan4x5x.h b/drivers/net/can/m_can/tcan4x5x.h
index c66da829b795..e62c030d3e1e 100644
--- a/drivers/net/can/m_can/tcan4x5x.h
+++ b/drivers/net/can/m_can/tcan4x5x.h
@@ -11,7 +11,6 @@
#include <linux/gpio/consumer.h>
#include <linux/regmap.h>
-#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/spi/spi.h>
--
2.30.2
next prev parent reply other threads:[~2021-03-30 11:47 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-30 11:45 pull-request: can-next 2021-03-30 Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 01/39] MAINTAINERS: remove Dan Murphy from m_can and tcan4x5x Marc Kleine-Budde
2021-03-30 20:10 ` patchwork-bot+netdevbpf
2021-03-30 11:45 ` [net-next 02/39] MAINTAINERS: Update MCAN MMIO device driver maintainer Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 03/39] can: dev: always create TX echo skb Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 04/39] can: dev: can_free_echo_skb(): don't crash the kernel if can_priv::echo_skb is accessed out of bounds Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 05/39] can: dev: can_free_echo_skb(): extend to return can frame length Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 06/39] can: add new CAN FD bittiming parameters: Transmitter Delay Compensation (TDC) Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 07/39] can: dev: reorder struct can_priv members for better packing Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 08/39] can: netlink: move '=' operators back to previous line (checkpatch fix) Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 09/39] can: bittiming: add calculation for CAN FD Transmitter Delay Compensation (TDC) Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 10/39] can: bittiming: add CAN_KBPS, CAN_MBPS and CAN_MHZ macros Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 11/39] can: grcan: add missing Kconfig dependency to HAS_IOMEM Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 12/39] can: xilinx_can: Simplify code by using dev_err_probe() Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 13/39] can: ucan: fix alignment constraints Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 14/39] can: peak_usb: pcan_usb_pro_encode_msg(): use macros for flags instead of plain integers Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 15/39] can: peak_usb: add support of ethtool set_phys_id() Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 16/39] can: peak_usb: add support of ONE_SHOT mode Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 17/39] can: m_can: m_can_class_allocate_dev(): remove impossible error return judgment Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 18/39] can: m_can: add infrastructure for internal timestamps Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 19/39] can: m_can: m_can_chip_config(): enable and configure " Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 20/39] can: m_can: fix periph RX path: use rx-offload to ensure skbs are sent from softirq context Marc Kleine-Budde
2021-03-30 11:45 ` Marc Kleine-Budde [this message]
2021-03-30 11:45 ` [net-next 22/39] can: mcp251xfd: add dev coredump support Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 23/39] can: mcp251xfd: simplify UINC handling Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 24/39] can: mcp251xfd: move netdevice.h to mcp251xfd.h Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 25/39] can: mcp251xfd: mcp251xfd_get_timestamp(): move " Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 26/39] can: mcp251xfd: add HW timestamp infrastructure Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 27/39] can: mcp251xfd: add HW timestamp to RX, TX and error CAN frames Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 28/39] can: c_can: convert block comments to network style comments Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 29/39] can: c_can: remove unnecessary blank lines and add suggested ones Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 30/39] can: c_can: fix indention Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 31/39] can: c_can: fix print formating string Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 32/39] can: c_can: replace double assignments by two single ones Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 33/39] can: c_can: fix remaining checkpatch warnings Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 34/39] can: c_can: remove unused code Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 35/39] can: c_can: fix indentation Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 36/39] can: c_can: add a comment about IF_RX interface's use Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 37/39] can: c_can: use 32-bit write to set arbitration register Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 38/39] can: c_can: prepare to up the message objects number Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 39/39] can: c_can: add support to 64 message objects Marc Kleine-Budde
2021-03-30 20:10 ` pull-request: can-next 2021-03-30 patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210330114559.1114855-22-mkl@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=davem@davemloft.net \
--cc=kernel@pengutronix.de \
--cc=kuba@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=wanjiabing@vivo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.