[net-next 39/39] can: c_can: add support to 64 message objects

[Marc Kleine-Budde <mkl@pengutronix.de>]

From: Dario Binacchi <dariobin@libero.it>

D_CAN controller supports 16, 32, 64 or 128 message objects, comparing
to 32 on C_CAN. AM335x/AM437x Sitara processors and DRA7 SOC all
instantiate a D_CAN controller with 64 message objects, as described
in the "DCAN features" subsection of the CAN chapter of their
technical reference manuals.

The driver policy has been kept unchanged, and as in the previous
version, the first half of the message objects is used for reception
and the second for transmission.

The I/O load is increased only in the case of 64 message objects,
keeping it unchanged in the case of 32. Two 32-bit read accesses are
in fact required, which however remained at 16-bit for configurations
with 32 message objects.

Link: https://lore.kernel.org/r/20210302215435.18286-7-dariobin@libero.it
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/c_can/c_can.c          | 27 ++++++++++++++------------
 drivers/net/can/c_can/c_can.h          |  5 +++--
 drivers/net/can/c_can/c_can_pci.c      |  6 +++++-
 drivers/net/can/c_can/c_can_platform.c |  6 +++++-
 4 files changed, 28 insertions(+), 16 deletions(-)

diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 032f8200668a..313793f6922d 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -454,7 +454,7 @@ static netdev_tx_t c_can_start_xmit(struct sk_buff *skb,
 	can_put_echo_skb(skb, dev, idx, 0);
 
 	/* Update the active bits */
-	atomic_add((1 << idx), &priv->tx_active);
+	atomic_add(BIT(idx), &priv->tx_active);
 	/* Start transmission */
 	c_can_object_put(dev, IF_TX, obj, IF_COMM_TX);
 
@@ -700,12 +700,15 @@ static void c_can_do_tx(struct net_device *dev)
 	struct net_device_stats *stats = &dev->stats;
 	u32 idx, obj, pkts = 0, bytes = 0, pend, clr;
 
-	pend = priv->read_reg(priv, C_CAN_INTPND2_REG);
+	if (priv->msg_obj_tx_last > 32)
+		pend = priv->read_reg32(priv, C_CAN_INTPND3_REG);
+	else
+		pend = priv->read_reg(priv, C_CAN_INTPND2_REG);
 	clr = pend;
 
 	while ((idx = ffs(pend))) {
 		idx--;
-		pend &= ~(1 << idx);
+		pend &= ~BIT(idx);
 		obj = idx + priv->msg_obj_tx_first;
 
 		/* We use IF_RX interface instead of IF_TX because we
@@ -721,7 +724,7 @@ static void c_can_do_tx(struct net_device *dev)
 	/* Clear the bits in the tx_active mask */
 	atomic_sub(clr, &priv->tx_active);
 
-	if (clr & (1 << (priv->msg_obj_tx_num - 1)))
+	if (clr & BIT(priv->msg_obj_tx_num - 1))
 		netif_wake_queue(dev);
 
 	if (pkts) {
@@ -755,10 +758,10 @@ static u32 c_can_adjust_pending(u32 pend, u32 rx_mask)
 	/* Find the first set bit after the gap. We walk backwards
 	 * from the last set bit.
 	 */
-	for (lasts--; pend & (1 << (lasts - 1)); lasts--)
+	for (lasts--; pend & BIT(lasts - 1); lasts--)
 		;
 
-	return pend & ~((1 << lasts) - 1);
+	return pend & ~GENMASK(lasts - 1, 0);
 }
 
 static inline void c_can_rx_object_get(struct net_device *dev,
@@ -814,7 +817,12 @@ static int c_can_read_objects(struct net_device *dev, struct c_can_priv *priv,
 
 static inline u32 c_can_get_pending(struct c_can_priv *priv)
 {
-	u32 pend = priv->read_reg(priv, C_CAN_NEWDAT1_REG);
+	u32 pend;
+
+	if (priv->msg_obj_rx_last > 16)
+		pend = priv->read_reg32(priv, C_CAN_NEWDAT1_REG);
+	else
+		pend = priv->read_reg(priv, C_CAN_NEWDAT1_REG);
 
 	return pend;
 }
@@ -835,11 +843,6 @@ static int c_can_do_rx_poll(struct net_device *dev, int quota)
 	struct c_can_priv *priv = netdev_priv(dev);
 	u32 pkts = 0, pend = 0, toread, n;
 
-	/* It is faster to read only one 16bit register. This is only possible
-	 * for a maximum number of 16 objects.
-	 */
-	WARN_ON(priv->msg_obj_rx_last > 16);
-
 	while (quota > 0) {
 		if (!pend) {
 			pend = c_can_get_pending(priv);
diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
index ee703b7ed42d..8acedd9e63a7 100644
--- a/drivers/net/can/c_can/c_can.h
+++ b/drivers/net/can/c_can/c_can.h
@@ -22,8 +22,6 @@
 #ifndef C_CAN_H
 #define C_CAN_H
 
-#define C_CAN_NO_OF_OBJECTS	32
-
 enum reg {
 	C_CAN_CTRL_REG = 0,
 	C_CAN_CTRL_EX_REG,
@@ -61,6 +59,7 @@ enum reg {
 	C_CAN_NEWDAT2_REG,
 	C_CAN_INTPND1_REG,
 	C_CAN_INTPND2_REG,
+	C_CAN_INTPND3_REG,
 	C_CAN_MSGVAL1_REG,
 	C_CAN_MSGVAL2_REG,
 	C_CAN_FUNCTION_REG,
@@ -122,6 +121,7 @@ static const u16 __maybe_unused reg_map_d_can[] = {
 	[C_CAN_NEWDAT2_REG]	= 0x9E,
 	[C_CAN_INTPND1_REG]	= 0xB0,
 	[C_CAN_INTPND2_REG]	= 0xB2,
+	[C_CAN_INTPND3_REG]	= 0xB4,
 	[C_CAN_MSGVAL1_REG]	= 0xC4,
 	[C_CAN_MSGVAL2_REG]	= 0xC6,
 	[C_CAN_IF1_COMREQ_REG]	= 0x100,
@@ -161,6 +161,7 @@ struct raminit_bits {
 
 struct c_can_driver_data {
 	enum c_can_dev_id id;
+	unsigned int msg_obj_num;
 
 	/* RAMINIT register description. Optional. */
 	const struct raminit_bits *raminit_bits; /* Array of START/DONE bit positions */
diff --git a/drivers/net/can/c_can/c_can_pci.c b/drivers/net/can/c_can/c_can_pci.c
index fa419e795498..bf2f8c3da1c1 100644
--- a/drivers/net/can/c_can/c_can_pci.c
+++ b/drivers/net/can/c_can/c_can_pci.c
@@ -31,6 +31,8 @@ enum c_can_pci_reg_align {
 struct c_can_pci_data {
 	/* Specify if is C_CAN or D_CAN */
 	enum c_can_dev_id type;
+	/* Number of message objects */
+	unsigned int msg_obj_num;
 	/* Set the register alignment in the memory */
 	enum c_can_pci_reg_align reg_align;
 	/* Set the frequency */
@@ -147,7 +149,7 @@ static int c_can_pci_probe(struct pci_dev *pdev,
 	}
 
 	/* allocate the c_can device */
-	dev = alloc_c_can_dev(C_CAN_NO_OF_OBJECTS);
+	dev = alloc_c_can_dev(c_can_pci_data->msg_obj_num);
 	if (!dev) {
 		ret = -ENOMEM;
 		goto out_iounmap;
@@ -252,6 +254,7 @@ static void c_can_pci_remove(struct pci_dev *pdev)
 
 static const struct c_can_pci_data c_can_sta2x11 = {
 	.type = BOSCH_C_CAN,
+	.msg_obj_num = 32,
 	.reg_align = C_CAN_REG_ALIGN_32,
 	.freq = 52000000, /* 52 Mhz */
 	.bar = 0,
@@ -259,6 +262,7 @@ static const struct c_can_pci_data c_can_sta2x11 = {
 
 static const struct c_can_pci_data c_can_pch = {
 	.type = BOSCH_C_CAN,
+	.msg_obj_num = 32,
 	.reg_align = C_CAN_REG_32,
 	.freq = 50000000, /* 50 MHz */
 	.init = c_can_pci_reset_pch,
diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
index 7ece36f61c6f..36950363682f 100644
--- a/drivers/net/can/c_can/c_can_platform.c
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -193,10 +193,12 @@ static void c_can_hw_raminit(const struct c_can_priv *priv, bool enable)
 
 static const struct c_can_driver_data c_can_drvdata = {
 	.id = BOSCH_C_CAN,
+	.msg_obj_num = 32,
 };
 
 static const struct c_can_driver_data d_can_drvdata = {
 	.id = BOSCH_D_CAN,
+	.msg_obj_num = 32,
 };
 
 static const struct raminit_bits dra7_raminit_bits[] = {
@@ -206,6 +208,7 @@ static const struct raminit_bits dra7_raminit_bits[] = {
 
 static const struct c_can_driver_data dra7_dcan_drvdata = {
 	.id = BOSCH_D_CAN,
+	.msg_obj_num = 64,
 	.raminit_num = ARRAY_SIZE(dra7_raminit_bits),
 	.raminit_bits = dra7_raminit_bits,
 	.raminit_pulse = true,
@@ -218,6 +221,7 @@ static const struct raminit_bits am3352_raminit_bits[] = {
 
 static const struct c_can_driver_data am3352_dcan_drvdata = {
 	.id = BOSCH_D_CAN,
+	.msg_obj_num = 64,
 	.raminit_num = ARRAY_SIZE(am3352_raminit_bits),
 	.raminit_bits = am3352_raminit_bits,
 };
@@ -294,7 +298,7 @@ static int c_can_plat_probe(struct platform_device *pdev)
 	}
 
 	/* allocate the c_can device */
-	dev = alloc_c_can_dev(C_CAN_NO_OF_OBJECTS);
+	dev = alloc_c_can_dev(drvdata->msg_obj_num);
 	if (!dev) {
 		ret = -ENOMEM;
 		goto exit;
-- 
2.30.2