All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel
@ 2021-03-30  7:09 ` Yunus Bas
  0 siblings, 0 replies; 9+ messages in thread
From: Yunus Bas @ 2021-03-30  7:09 UTC (permalink / raw)
  To: dri-devel, thierry.reding, sam; +Cc: devicetree, airlied, daniel, robh+dt

From: Stefan Riedmueller <s.riedmueller@phytec.de>

This patch adds support for the EDT ETMV570G2DHU 5.7" (640x480) lcd panel
to DRM simple panel driver.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Yunus Bas <y.bas@phytec.de>
---
 .../bindings/display/panel/panel-simple.yaml  |  3 ++
 drivers/gpu/drm/panel/panel-simple.c          | 29 +++++++++++++++++++
 2 files changed, 32 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
index 62b0d54d87b7..57be1fa39728 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
@@ -114,6 +114,9 @@ properties:
       - edt,etm043080dh6gp
         # Emerging Display Technology Corp. 480x272 TFT Display
       - edt,etm0430g0dh6
+        # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel with
+        # capacitive touch
+      - edt,etmv570g2dhu
         # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
         # Same as ETM0700G0DH6 but with inverted pixel clock.
       - edt,etm070080bdh6
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 4e2dad314c79..283c17a75376 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1926,6 +1926,32 @@ static const struct panel_desc edt_et057090dhu = {
 	.connector_type = DRM_MODE_CONNECTOR_DPI,
 };
 
+static const struct drm_display_mode edt_etmv570g2dhu_mode = {
+	.clock = 25175,
+	.hdisplay = 640,
+	.hsync_start = 640,
+	.hsync_end = 640 + 16,
+	.htotal = 640 + 16 + 30 + 114,
+	.vdisplay = 480,
+	.vsync_start = 480 + 10,
+	.vsync_end = 480 + 10 + 3,
+	.vtotal = 480 + 10 + 3 + 35,
+	.flags = DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_PHSYNC,
+};
+
+static const struct panel_desc edt_etmv570g2dhu = {
+	.modes = &edt_etmv570g2dhu_mode,
+	.num_modes = 1,
+	.bpc = 6,
+	.size = {
+		.width = 115,
+		.height = 86,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+	.connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
 static const struct drm_display_mode edt_etm0700g0dh6_mode = {
 	.clock = 33260,
 	.hdisplay = 800,
@@ -4226,6 +4252,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "edt,et057090dhu",
 		.data = &edt_et057090dhu,
+	}, {
+		.compatible = "edt,etmv570g2dhu",
+		.data = &edt_etmv570g2dhu,
 	}, {
 		.compatible = "edt,et070080dh6",
 		.data = &edt_etm0700g0dh6,
-- 
2.30.0


^ permalink raw reply related	[flat|nested] 9+ messages in thread
* [PATCH 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel
@ 2021-03-30  7:09 ` Yunus Bas
  0 siblings, 0 replies; 9+ messages in thread
From: Yunus Bas @ 2021-03-30  7:09 UTC (permalink / raw)
  To: dri-devel, thierry.reding, sam; +Cc: airlied, devicetree, robh+dt

From: Stefan Riedmueller <s.riedmueller@phytec.de>

This patch adds support for the EDT ETMV570G2DHU 5.7" (640x480) lcd panel
to DRM simple panel driver.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Yunus Bas <y.bas@phytec.de>
---
 .../bindings/display/panel/panel-simple.yaml  |  3 ++
 drivers/gpu/drm/panel/panel-simple.c          | 29 +++++++++++++++++++
 2 files changed, 32 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
index 62b0d54d87b7..57be1fa39728 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
@@ -114,6 +114,9 @@ properties:
       - edt,etm043080dh6gp
         # Emerging Display Technology Corp. 480x272 TFT Display
       - edt,etm0430g0dh6
+        # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel with
+        # capacitive touch
+      - edt,etmv570g2dhu
         # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
         # Same as ETM0700G0DH6 but with inverted pixel clock.
       - edt,etm070080bdh6
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 4e2dad314c79..283c17a75376 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1926,6 +1926,32 @@ static const struct panel_desc edt_et057090dhu = {
 	.connector_type = DRM_MODE_CONNECTOR_DPI,
 };
 
+static const struct drm_display_mode edt_etmv570g2dhu_mode = {
+	.clock = 25175,
+	.hdisplay = 640,
+	.hsync_start = 640,
+	.hsync_end = 640 + 16,
+	.htotal = 640 + 16 + 30 + 114,
+	.vdisplay = 480,
+	.vsync_start = 480 + 10,
+	.vsync_end = 480 + 10 + 3,
+	.vtotal = 480 + 10 + 3 + 35,
+	.flags = DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_PHSYNC,
+};
+
+static const struct panel_desc edt_etmv570g2dhu = {
+	.modes = &edt_etmv570g2dhu_mode,
+	.num_modes = 1,
+	.bpc = 6,
+	.size = {
+		.width = 115,
+		.height = 86,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+	.connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
 static const struct drm_display_mode edt_etm0700g0dh6_mode = {
 	.clock = 33260,
 	.hdisplay = 800,
@@ -4226,6 +4252,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "edt,et057090dhu",
 		.data = &edt_et057090dhu,
+	}, {
+		.compatible = "edt,etmv570g2dhu",
+		.data = &edt_etmv570g2dhu,
 	}, {
 		.compatible = "edt,et070080dh6",
 		.data = &edt_etm0700g0dh6,
-- 
2.30.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply related	[flat|nested] 9+ messages in thread
* [PATCH 2/2] drm/panel: simple: Add support for EDT ETM0350G0DH6 panel
  2021-03-30  7:09 ` Yunus Bas
@ 2021-03-30  7:09   ` Yunus Bas
  -1 siblings, 0 replies; 9+ messages in thread
From: Yunus Bas @ 2021-03-30  7:09 UTC (permalink / raw)
  To: dri-devel, thierry.reding, sam; +Cc: devicetree, airlied, daniel, robh+dt

From: Stefan Riedmueller <s.riedmueller@phytec.de>

This patch adds support for the EDT ETM0350G0DH6 3.5" (320x240) lcd
panel to DRM simple panel driver.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Yunus Bas <y.bas@phytec.de>
---
 .../bindings/display/panel/panel-simple.yaml  |  3 ++
 drivers/gpu/drm/panel/panel-simple.c          | 29 +++++++++++++++++++
 2 files changed, 32 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
index 57be1fa39728..9a6b42f911d1 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
@@ -107,6 +107,9 @@ properties:
       - dlc,dlc1010gig
         # Emerging Display Technology Corp. 3.5" QVGA TFT LCD panel
       - edt,et035012dm6
+        # Emerging Display Technology Corp. 3.5" WVGA TFT LCD panel with
+        # capacitive multitouch
+      - edt,etm0350g0dh6
         # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel
       - edt,et057090dhu
       - edt,et070080dh6
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 283c17a75376..70c25f6e642b 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1847,6 +1847,32 @@ static const struct panel_desc edt_et035012dm6 = {
 	.bus_flags = DRM_BUS_FLAG_DE_LOW | DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
 };
 
+static const struct drm_display_mode edt_etm0350g0dh6_mode = {
+	.clock = 6520,
+	.hdisplay = 320,
+	.hsync_start = 320 + 20,
+	.hsync_end = 320 + 20 + 68,
+	.htotal = 320 + 20 + 68,
+	.vdisplay = 240,
+	.vsync_start = 240 + 4,
+	.vsync_end = 240 + 4 + 18,
+	.vtotal = 240 + 4 + 18,
+	.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+};
+
+static const struct panel_desc edt_etm0350g0dh6 = {
+	.modes = &edt_etm0350g0dh6_mode,
+	.num_modes = 1,
+	.bpc = 6,
+	.size = {
+		.width = 70,
+		.height = 53,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+	.connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
 static const struct drm_display_mode edt_etm043080dh6gp_mode = {
 	.clock = 10870,
 	.hdisplay = 480,
@@ -4243,6 +4269,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "edt,et035012dm6",
 		.data = &edt_et035012dm6,
+	}, {
+		.compatible = "edt,etm0350g0dh6",
+		.data = &edt_etm0350g0dh6,
 	}, {
 		.compatible = "edt,etm043080dh6gp",
 		.data = &edt_etm043080dh6gp,
-- 
2.30.0


^ permalink raw reply related	[flat|nested] 9+ messages in thread
* [PATCH 2/2] drm/panel: simple: Add support for EDT ETM0350G0DH6 panel
@ 2021-03-30  7:09   ` Yunus Bas
  0 siblings, 0 replies; 9+ messages in thread
From: Yunus Bas @ 2021-03-30  7:09 UTC (permalink / raw)
  To: dri-devel, thierry.reding, sam; +Cc: airlied, devicetree, robh+dt

From: Stefan Riedmueller <s.riedmueller@phytec.de>

This patch adds support for the EDT ETM0350G0DH6 3.5" (320x240) lcd
panel to DRM simple panel driver.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Yunus Bas <y.bas@phytec.de>
---
 .../bindings/display/panel/panel-simple.yaml  |  3 ++
 drivers/gpu/drm/panel/panel-simple.c          | 29 +++++++++++++++++++
 2 files changed, 32 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
index 57be1fa39728..9a6b42f911d1 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
@@ -107,6 +107,9 @@ properties:
       - dlc,dlc1010gig
         # Emerging Display Technology Corp. 3.5" QVGA TFT LCD panel
       - edt,et035012dm6
+        # Emerging Display Technology Corp. 3.5" WVGA TFT LCD panel with
+        # capacitive multitouch
+      - edt,etm0350g0dh6
         # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel
       - edt,et057090dhu
       - edt,et070080dh6
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 283c17a75376..70c25f6e642b 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1847,6 +1847,32 @@ static const struct panel_desc edt_et035012dm6 = {
 	.bus_flags = DRM_BUS_FLAG_DE_LOW | DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
 };
 
+static const struct drm_display_mode edt_etm0350g0dh6_mode = {
+	.clock = 6520,
+	.hdisplay = 320,
+	.hsync_start = 320 + 20,
+	.hsync_end = 320 + 20 + 68,
+	.htotal = 320 + 20 + 68,
+	.vdisplay = 240,
+	.vsync_start = 240 + 4,
+	.vsync_end = 240 + 4 + 18,
+	.vtotal = 240 + 4 + 18,
+	.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+};
+
+static const struct panel_desc edt_etm0350g0dh6 = {
+	.modes = &edt_etm0350g0dh6_mode,
+	.num_modes = 1,
+	.bpc = 6,
+	.size = {
+		.width = 70,
+		.height = 53,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+	.connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
 static const struct drm_display_mode edt_etm043080dh6gp_mode = {
 	.clock = 10870,
 	.hdisplay = 480,
@@ -4243,6 +4269,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "edt,et035012dm6",
 		.data = &edt_et035012dm6,
+	}, {
+		.compatible = "edt,etm0350g0dh6",
+		.data = &edt_etm0350g0dh6,
 	}, {
 		.compatible = "edt,etm043080dh6gp",
 		.data = &edt_etm043080dh6gp,
-- 
2.30.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply related	[flat|nested] 9+ messages in thread
* Re: [PATCH 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel
  2021-03-30  7:09 ` Yunus Bas
@ 2021-03-30 22:47   ` Rob Herring
  -1 siblings, 0 replies; 9+ messages in thread
From: Rob Herring @ 2021-03-30 22:47 UTC (permalink / raw)
  To: Yunus Bas; +Cc: dri-devel, thierry.reding, sam, devicetree, airlied, daniel

On Tue, Mar 30, 2021 at 09:09:06AM +0200, Yunus Bas wrote:
> From: Stefan Riedmueller <s.riedmueller@phytec.de>
> 
> This patch adds support for the EDT ETMV570G2DHU 5.7" (640x480) lcd panel
> to DRM simple panel driver.
> 
> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
> Signed-off-by: Yunus Bas <y.bas@phytec.de>
> ---
>  .../bindings/display/panel/panel-simple.yaml  |  3 ++

Bindings should be their own patch.

>  drivers/gpu/drm/panel/panel-simple.c          | 29 +++++++++++++++++++
>  2 files changed, 32 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> index 62b0d54d87b7..57be1fa39728 100644
> --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> @@ -114,6 +114,9 @@ properties:
>        - edt,etm043080dh6gp
>          # Emerging Display Technology Corp. 480x272 TFT Display
>        - edt,etm0430g0dh6
> +        # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel with
> +        # capacitive touch
> +      - edt,etmv570g2dhu
>          # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
>          # Same as ETM0700G0DH6 but with inverted pixel clock.
>        - edt,etm070080bdh6
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 4e2dad314c79..283c17a75376 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -1926,6 +1926,32 @@ static const struct panel_desc edt_et057090dhu = {
>  	.connector_type = DRM_MODE_CONNECTOR_DPI,
>  };
>  
> +static const struct drm_display_mode edt_etmv570g2dhu_mode = {
> +	.clock = 25175,
> +	.hdisplay = 640,
> +	.hsync_start = 640,
> +	.hsync_end = 640 + 16,
> +	.htotal = 640 + 16 + 30 + 114,
> +	.vdisplay = 480,
> +	.vsync_start = 480 + 10,
> +	.vsync_end = 480 + 10 + 3,
> +	.vtotal = 480 + 10 + 3 + 35,
> +	.flags = DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_PHSYNC,
> +};
> +
> +static const struct panel_desc edt_etmv570g2dhu = {
> +	.modes = &edt_etmv570g2dhu_mode,
> +	.num_modes = 1,
> +	.bpc = 6,
> +	.size = {
> +		.width = 115,
> +		.height = 86,
> +	},
> +	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
> +	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
> +	.connector_type = DRM_MODE_CONNECTOR_DPI,
> +};
> +
>  static const struct drm_display_mode edt_etm0700g0dh6_mode = {
>  	.clock = 33260,
>  	.hdisplay = 800,
> @@ -4226,6 +4252,9 @@ static const struct of_device_id platform_of_match[] = {
>  	}, {
>  		.compatible = "edt,et057090dhu",
>  		.data = &edt_et057090dhu,
> +	}, {
> +		.compatible = "edt,etmv570g2dhu",
> +		.data = &edt_etmv570g2dhu,
>  	}, {
>  		.compatible = "edt,et070080dh6",
>  		.data = &edt_etm0700g0dh6,
> -- 
> 2.30.0
> 

^ permalink raw reply	[flat|nested] 9+ messages in thread
* Re: [PATCH 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel
@ 2021-03-30 22:47   ` Rob Herring
  0 siblings, 0 replies; 9+ messages in thread
From: Rob Herring @ 2021-03-30 22:47 UTC (permalink / raw)
  To: Yunus Bas; +Cc: devicetree, airlied, dri-devel, thierry.reding, sam

On Tue, Mar 30, 2021 at 09:09:06AM +0200, Yunus Bas wrote:
> From: Stefan Riedmueller <s.riedmueller@phytec.de>
> 
> This patch adds support for the EDT ETMV570G2DHU 5.7" (640x480) lcd panel
> to DRM simple panel driver.
> 
> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
> Signed-off-by: Yunus Bas <y.bas@phytec.de>
> ---
>  .../bindings/display/panel/panel-simple.yaml  |  3 ++

Bindings should be their own patch.

>  drivers/gpu/drm/panel/panel-simple.c          | 29 +++++++++++++++++++
>  2 files changed, 32 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> index 62b0d54d87b7..57be1fa39728 100644
> --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> @@ -114,6 +114,9 @@ properties:
>        - edt,etm043080dh6gp
>          # Emerging Display Technology Corp. 480x272 TFT Display
>        - edt,etm0430g0dh6
> +        # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel with
> +        # capacitive touch
> +      - edt,etmv570g2dhu
>          # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
>          # Same as ETM0700G0DH6 but with inverted pixel clock.
>        - edt,etm070080bdh6
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 4e2dad314c79..283c17a75376 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -1926,6 +1926,32 @@ static const struct panel_desc edt_et057090dhu = {
>  	.connector_type = DRM_MODE_CONNECTOR_DPI,
>  };
>  
> +static const struct drm_display_mode edt_etmv570g2dhu_mode = {
> +	.clock = 25175,
> +	.hdisplay = 640,
> +	.hsync_start = 640,
> +	.hsync_end = 640 + 16,
> +	.htotal = 640 + 16 + 30 + 114,
> +	.vdisplay = 480,
> +	.vsync_start = 480 + 10,
> +	.vsync_end = 480 + 10 + 3,
> +	.vtotal = 480 + 10 + 3 + 35,
> +	.flags = DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_PHSYNC,
> +};
> +
> +static const struct panel_desc edt_etmv570g2dhu = {
> +	.modes = &edt_etmv570g2dhu_mode,
> +	.num_modes = 1,
> +	.bpc = 6,
> +	.size = {
> +		.width = 115,
> +		.height = 86,
> +	},
> +	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
> +	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
> +	.connector_type = DRM_MODE_CONNECTOR_DPI,
> +};
> +
>  static const struct drm_display_mode edt_etm0700g0dh6_mode = {
>  	.clock = 33260,
>  	.hdisplay = 800,
> @@ -4226,6 +4252,9 @@ static const struct of_device_id platform_of_match[] = {
>  	}, {
>  		.compatible = "edt,et057090dhu",
>  		.data = &edt_et057090dhu,
> +	}, {
> +		.compatible = "edt,etmv570g2dhu",
> +		.data = &edt_etmv570g2dhu,
>  	}, {
>  		.compatible = "edt,et070080dh6",
>  		.data = &edt_etm0700g0dh6,
> -- 
> 2.30.0
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 9+ messages in thread
* Re: [PATCH 2/2] drm/panel: simple: Add support for EDT ETM0350G0DH6 panel
  2021-03-30  7:09   ` Yunus Bas
@ 2021-03-30 22:48     ` Rob Herring
  -1 siblings, 0 replies; 9+ messages in thread
From: Rob Herring @ 2021-03-30 22:48 UTC (permalink / raw)
  To: Yunus Bas; +Cc: dri-devel, thierry.reding, sam, devicetree, airlied, daniel

On Tue, Mar 30, 2021 at 09:09:07AM +0200, Yunus Bas wrote:
> From: Stefan Riedmueller <s.riedmueller@phytec.de>
> 
> This patch adds support for the EDT ETM0350G0DH6 3.5" (320x240) lcd
> panel to DRM simple panel driver.
> 
> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
> Signed-off-by: Yunus Bas <y.bas@phytec.de>
> ---
>  .../bindings/display/panel/panel-simple.yaml  |  3 ++
>  drivers/gpu/drm/panel/panel-simple.c          | 29 +++++++++++++++++++
>  2 files changed, 32 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> index 57be1fa39728..9a6b42f911d1 100644
> --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> @@ -107,6 +107,9 @@ properties:
>        - dlc,dlc1010gig
>          # Emerging Display Technology Corp. 3.5" QVGA TFT LCD panel
>        - edt,et035012dm6
> +        # Emerging Display Technology Corp. 3.5" WVGA TFT LCD panel with
> +        # capacitive multitouch
> +      - edt,etm0350g0dh6

Alpha-numeric order.

>          # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel
>        - edt,et057090dhu
>        - edt,et070080dh6

^ permalink raw reply	[flat|nested] 9+ messages in thread
* Re: [PATCH 2/2] drm/panel: simple: Add support for EDT ETM0350G0DH6 panel
@ 2021-03-30 22:48     ` Rob Herring
  0 siblings, 0 replies; 9+ messages in thread
From: Rob Herring @ 2021-03-30 22:48 UTC (permalink / raw)
  To: Yunus Bas; +Cc: devicetree, airlied, dri-devel, thierry.reding, sam

On Tue, Mar 30, 2021 at 09:09:07AM +0200, Yunus Bas wrote:
> From: Stefan Riedmueller <s.riedmueller@phytec.de>
> 
> This patch adds support for the EDT ETM0350G0DH6 3.5" (320x240) lcd
> panel to DRM simple panel driver.
> 
> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
> Signed-off-by: Yunus Bas <y.bas@phytec.de>
> ---
>  .../bindings/display/panel/panel-simple.yaml  |  3 ++
>  drivers/gpu/drm/panel/panel-simple.c          | 29 +++++++++++++++++++
>  2 files changed, 32 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> index 57be1fa39728..9a6b42f911d1 100644
> --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> @@ -107,6 +107,9 @@ properties:
>        - dlc,dlc1010gig
>          # Emerging Display Technology Corp. 3.5" QVGA TFT LCD panel
>        - edt,et035012dm6
> +        # Emerging Display Technology Corp. 3.5" WVGA TFT LCD panel with
> +        # capacitive multitouch
> +      - edt,etm0350g0dh6

Alpha-numeric order.

>          # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel
>        - edt,et057090dhu
>        - edt,et070080dh6
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 9+ messages in thread
* Re: [PATCH 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel
  2021-03-30 22:47   ` Rob Herring
  (?)
@ 2021-03-31 14:50   ` Yunus Bas
  -1 siblings, 0 replies; 9+ messages in thread
From: Yunus Bas @ 2021-03-31 14:50 UTC (permalink / raw)
  To: robh; +Cc: devicetree, airlied, dri-devel, thierry.reding, sam


[-- Attachment #1.1: Type: text/plain, Size: 4255 bytes --]

Am Dienstag, dem 30.03.2021 um 17:47 -0500 schrieb Rob Herring:
On Tue, Mar 30, 2021 at 09:09:06AM +0200, Yunus Bas wrote:
From: Stefan Riedmueller <s.riedmueller@phytec.de<mailto:s.riedmueller@phytec.de>>

This patch adds support for the EDT ETMV570G2DHU 5.7" (640x480) lcd panel
to DRM simple panel driver.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de<mailto:s.riedmueller@phytec.de>>
Signed-off-by: Yunus Bas <y.bas@phytec.de<mailto:y.bas@phytec.de>>
---
 .../bindings/display/panel/panel-simple.yaml  |  3 ++

Bindings should be their own patch.

Ok, I'll split up the patches.

 drivers/gpu/drm/panel/panel-simple.c          | 29 +++++++++++++++++++
 2 files changed, 32 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
index 62b0d54d87b7..57be1fa39728 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
@@ -114,6 +114,9 @@ properties:
       - edt,etm043080dh6gp
         # Emerging Display Technology Corp. 480x272 TFT Display
       - edt,etm0430g0dh6
+        # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel with
+        # capacitive touch
+      - edt,etmv570g2dhu
         # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
         # Same as ETM0700G0DH6 but with inverted pixel clock.
       - edt,etm070080bdh6
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 4e2dad314c79..283c17a75376 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1926,6 +1926,32 @@ static const struct panel_desc edt_et057090dhu = {
        .connector_type = DRM_MODE_CONNECTOR_DPI,
 };

+static const struct drm_display_mode edt_etmv570g2dhu_mode = {
+       .clock = 25175,
+       .hdisplay = 640,
+       .hsync_start = 640,
+       .hsync_end = 640 + 16,
+       .htotal = 640 + 16 + 30 + 114,
+       .vdisplay = 480,
+       .vsync_start = 480 + 10,
+       .vsync_end = 480 + 10 + 3,
+       .vtotal = 480 + 10 + 3 + 35,
+       .flags = DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_PHSYNC,
+};
+
+static const struct panel_desc edt_etmv570g2dhu = {
+       .modes = &edt_etmv570g2dhu_mode,
+       .num_modes = 1,
+       .bpc = 6,
+       .size = {
+               .width = 115,
+               .height = 86,
+       },
+       .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+       .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+       .connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
 static const struct drm_display_mode edt_etm0700g0dh6_mode = {
        .clock = 33260,
        .hdisplay = 800,
@@ -4226,6 +4252,9 @@ static const struct of_device_id platform_of_match[] = {
        }, {
                .compatible = "edt,et057090dhu",
                .data = &edt_et057090dhu,
+       }, {
+               .compatible = "edt,etmv570g2dhu",
+               .data = &edt_etmv570g2dhu,
        }, {
                .compatible = "edt,et070080dh6",
                .data = &edt_etm0700g0dh6,
--
2.30.0



--

Mit freundlichen Grüßen
Yunus Bas

-Software Engineer-
PHYTEC Messtechnik GmbH
Robert-Koch-Str. 39
55129 Mainz
Germany
Tel.: +49 (0)6131 9221- 466
Web: www.phytec.de<http://www.phytec.de/>

Sie finden uns auch auf: Facebook<https://www.facebook.com/PHYTEC.Mainz>, LinkedIn,<http://www.linkedin.com/company/phytec-messtechnik-gmbh> Xing<https://www.xing.com/companies/phytecmesstechnikgmbh>, YouTube<http://www.youtube.com/user/PhytecMainz>

PHYTEC Messtechnik GmbH | Robert-Koch-Str. 39 | 55129 Mainz, Germany
Geschäftsführer: Dipl.-Ing. Michael Mitezki, Dipl.-Ing. Bodo Huber | Handelsregister Mainz HRB 4656 | Finanzamt Mainz | St.Nr. 266500608, DE 149059855
This E-Mail may contain confidential or privileged information. If you are not the intended recipient (or have received this E-Mail in error) please notify the sender immediately and destroy this E-Mail. Any unauthorized copying, disclosure or distribution of the material in this E-Mail is strictly forbidden.

[-- Attachment #1.2: Type: text/html, Size: 22665 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply related	[flat|nested] 9+ messages in thread
end of thread, other threads:[~2021-03-31 14:50 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-30  7:09 [PATCH 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel Yunus Bas
2021-03-30  7:09 ` Yunus Bas
2021-03-30  7:09 ` [PATCH 2/2] drm/panel: simple: Add support for EDT ETM0350G0DH6 panel Yunus Bas
2021-03-30  7:09   ` Yunus Bas
2021-03-30 22:48   ` Rob Herring
2021-03-30 22:48     ` Rob Herring
2021-03-30 22:47 ` [PATCH 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel Rob Herring
2021-03-30 22:47   ` Rob Herring
2021-03-31 14:50   ` Yunus Bas

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.