From: Andy Shevchenko <andriy.shevchenko@linux.intel.com> To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>, "Gustavo A. R. Silva" <gustavoars@kernel.org>, Linus Walleij <linus.walleij@linaro.org>, Drew Fustini <drew@beagleboard.org>, Tony Lindgren <tony@atomide.com>, Christophe JAILLET <christophe.jaillet@wanadoo.fr>, Thierry Reding <treding@nvidia.com>, linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org, linux-tegra@vger.kernel.org Cc: Vladimir Zapolskiy <vz@mleia.com>, Haojian Zhuang <haojian.zhuang@linaro.org>, Michal Simek <michal.simek@xilinx.com>, Daniel Mack <daniel@zonque.org>, Robert Jarzmik <robert.jarzmik@free.fr>, Thierry Reding <thierry.reding@gmail.com>, Jonathan Hunter <jonathanh@nvidia.com> Subject: [PATCH v1 3/3] pinctrl: Add PIN_CONFIG_MODE_PWM to enum pin_config_param Date: Mon, 12 Apr 2021 17:07:41 +0300 [thread overview] Message-ID: <20210412140741.39946-3-andriy.shevchenko@linux.intel.com> (raw) In-Reply-To: <20210412140741.39946-1-andriy.shevchenko@linux.intel.com> It seems that we will have more and more pin controllers that support PWM function on the (selected) pins. Due to it being a part of pin controller IP the idea is to have some code that will switch the mode and attach the corresponding driver, for example, via using it as a library. Meanwhile, put a corresponding item to the pin_config_param enumerator. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- include/linux/pinctrl/pinconf-generic.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index 189e701832ea..e18ab3d5908f 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -80,6 +80,7 @@ struct pinctrl_map; * operation, if several modes of operation are supported these can be * passed in the argument on a custom form, else just use argument 1 * to indicate low power mode, argument 0 turns low power mode off. + * @PIN_CONFIG_MODE_PWM: this will configure the pin for PWM * @PIN_CONFIG_OUTPUT_ENABLE: this will enable the pin's output mode * without driving a value there. For most platforms this reduces to * enable the output buffers and then let the pin controller current @@ -125,6 +126,7 @@ enum pin_config_param { PIN_CONFIG_INPUT_SCHMITT, PIN_CONFIG_INPUT_SCHMITT_ENABLE, PIN_CONFIG_MODE_LOW_POWER, + PIN_CONFIG_MODE_PWM, PIN_CONFIG_OUTPUT_ENABLE, PIN_CONFIG_OUTPUT, PIN_CONFIG_PERSIST_STATE, -- 2.30.2
WARNING: multiple messages have this Message-ID (diff)
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com> To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>, "Gustavo A. R. Silva" <gustavoars@kernel.org>, Linus Walleij <linus.walleij@linaro.org>, Drew Fustini <drew@beagleboard.org>, Tony Lindgren <tony@atomide.com>, Christophe JAILLET <christophe.jaillet@wanadoo.fr>, Thierry Reding <treding@nvidia.com>, linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org, linux-tegra@vger.kernel.org Cc: Vladimir Zapolskiy <vz@mleia.com>, Haojian Zhuang <haojian.zhuang@linaro.org>, Michal Simek <michal.simek@xilinx.com>, Daniel Mack <daniel@zonque.org>, Robert Jarzmik <robert.jarzmik@free.fr>, Thierry Reding <thierry.reding@gmail.com>, Jonathan Hunter <jonathanh@nvidia.com> Subject: [PATCH v1 3/3] pinctrl: Add PIN_CONFIG_MODE_PWM to enum pin_config_param Date: Mon, 12 Apr 2021 17:07:41 +0300 [thread overview] Message-ID: <20210412140741.39946-3-andriy.shevchenko@linux.intel.com> (raw) In-Reply-To: <20210412140741.39946-1-andriy.shevchenko@linux.intel.com> It seems that we will have more and more pin controllers that support PWM function on the (selected) pins. Due to it being a part of pin controller IP the idea is to have some code that will switch the mode and attach the corresponding driver, for example, via using it as a library. Meanwhile, put a corresponding item to the pin_config_param enumerator. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- include/linux/pinctrl/pinconf-generic.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index 189e701832ea..e18ab3d5908f 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -80,6 +80,7 @@ struct pinctrl_map; * operation, if several modes of operation are supported these can be * passed in the argument on a custom form, else just use argument 1 * to indicate low power mode, argument 0 turns low power mode off. + * @PIN_CONFIG_MODE_PWM: this will configure the pin for PWM * @PIN_CONFIG_OUTPUT_ENABLE: this will enable the pin's output mode * without driving a value there. For most platforms this reduces to * enable the output buffers and then let the pin controller current @@ -125,6 +126,7 @@ enum pin_config_param { PIN_CONFIG_INPUT_SCHMITT, PIN_CONFIG_INPUT_SCHMITT_ENABLE, PIN_CONFIG_MODE_LOW_POWER, + PIN_CONFIG_MODE_PWM, PIN_CONFIG_OUTPUT_ENABLE, PIN_CONFIG_OUTPUT, PIN_CONFIG_PERSIST_STATE, -- 2.30.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-04-12 14:07 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-04-12 14:07 [PATCH v1 1/3] pinctrl: Keep enum pin_config_param ordered by name Andy Shevchenko 2021-04-12 14:07 ` Andy Shevchenko 2021-04-12 14:07 ` [PATCH v1 2/3] pinctrl: Introduce MODE group in enum pin_config_param Andy Shevchenko 2021-04-12 14:07 ` Andy Shevchenko 2021-04-12 14:07 ` Andy Shevchenko [this message] 2021-04-12 14:07 ` [PATCH v1 3/3] pinctrl: Add PIN_CONFIG_MODE_PWM to " Andy Shevchenko 2021-04-22 0:03 ` [PATCH v1 1/3] pinctrl: Keep enum pin_config_param ordered by name Linus Walleij 2021-04-22 0:03 ` Linus Walleij
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210412140741.39946-3-andriy.shevchenko@linux.intel.com \ --to=andriy.shevchenko@linux.intel.com \ --cc=christophe.jaillet@wanadoo.fr \ --cc=daniel@zonque.org \ --cc=drew@beagleboard.org \ --cc=gustavoars@kernel.org \ --cc=haojian.zhuang@linaro.org \ --cc=jonathanh@nvidia.com \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=linux-tegra@vger.kernel.org \ --cc=michal.simek@xilinx.com \ --cc=robert.jarzmik@free.fr \ --cc=thierry.reding@gmail.com \ --cc=tony@atomide.com \ --cc=treding@nvidia.com \ --cc=vz@mleia.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.