All of lore.kernel.org
 help / color / mirror / Atom feed
From: Erwan Le Ray <erwan.leray@foss.st.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Jiri Slaby <jslaby@suse.com>, Rob Herring <robh+dt@kernel.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: <linux-serial@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	Erwan Le Ray <erwan.leray@foss.st.com>,
	Fabrice Gasnier <fabrice.gasnier@foss.st.com>,
	Valentin Caron <valentin.caron@foss.st.com>
Subject: [PATCH v2 2/4] dt-bindings: serial: stm32: override FIFO threshold properties
Date: Tue, 13 Apr 2021 19:40:13 +0200	[thread overview]
Message-ID: <20210413174015.23011-3-erwan.leray@foss.st.com> (raw)
In-Reply-To: <20210413174015.23011-1-erwan.leray@foss.st.com>

Override rx-threshold and tx-threshold properties:
- extend description
- provide default and expected values

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>

Changes in v2:
Change added properties naming and factorize it in serial.yaml as proposed
by Rob Herring.

diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
index c69f8464cdf3..71a6426bc558 100644
--- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
@@ -65,6 +65,18 @@ properties:
   linux,rs485-enabled-at-boot-time: true
   rs485-rx-during-tx: true
 
+  rx-threshold:
+    description:
+      If value is set to 1, RX FIFO threshold is disabled.
+    enum: [1, 2, 4, 8, 12, 14, 16]
+    default: 8
+
+  tx-threshold:
+    description:
+      If value is set to 1, TX FIFO threshold is disabled.
+    enum: [1, 2, 4, 8, 12, 14, 16]
+    default: 8
+
 allOf:
   - $ref: rs485.yaml#
   - $ref: serial.yaml#
@@ -82,6 +94,17 @@ allOf:
     then:
       properties:
         rx-tx-swap: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32-uart
+              - st,stm32f7-uart
+    then:
+      properties:
+        rx-threshold: false
+        tx-threshold: false
 
 required:
   - compatible
@@ -96,13 +119,15 @@ examples:
   - |
     #include <dt-bindings/clock/stm32mp1-clks.h>
     usart1: serial@40011000 {
-      compatible = "st,stm32-uart";
+      compatible = "st,stm32h7-uart";
       reg = <0x40011000 0x400>;
       interrupts = <37>;
       clocks = <&rcc 0 164>;
       dmas = <&dma2 2 4 0x414 0x0>,
              <&dma2 7 4 0x414 0x0>;
       dma-names = "rx", "tx";
+      rx-threshold = <4>;
+      tx-threshold = <4>;
       rs485-rts-active-low;
     };
 
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Erwan Le Ray <erwan.leray@foss.st.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Jiri Slaby <jslaby@suse.com>, Rob Herring <robh+dt@kernel.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: <linux-serial@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	Erwan Le Ray <erwan.leray@foss.st.com>,
	Fabrice Gasnier <fabrice.gasnier@foss.st.com>,
	Valentin Caron <valentin.caron@foss.st.com>
Subject: [PATCH v2 2/4] dt-bindings: serial: stm32: override FIFO threshold properties
Date: Tue, 13 Apr 2021 19:40:13 +0200	[thread overview]
Message-ID: <20210413174015.23011-3-erwan.leray@foss.st.com> (raw)
In-Reply-To: <20210413174015.23011-1-erwan.leray@foss.st.com>

Override rx-threshold and tx-threshold properties:
- extend description
- provide default and expected values

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>

Changes in v2:
Change added properties naming and factorize it in serial.yaml as proposed
by Rob Herring.

diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
index c69f8464cdf3..71a6426bc558 100644
--- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
@@ -65,6 +65,18 @@ properties:
   linux,rs485-enabled-at-boot-time: true
   rs485-rx-during-tx: true
 
+  rx-threshold:
+    description:
+      If value is set to 1, RX FIFO threshold is disabled.
+    enum: [1, 2, 4, 8, 12, 14, 16]
+    default: 8
+
+  tx-threshold:
+    description:
+      If value is set to 1, TX FIFO threshold is disabled.
+    enum: [1, 2, 4, 8, 12, 14, 16]
+    default: 8
+
 allOf:
   - $ref: rs485.yaml#
   - $ref: serial.yaml#
@@ -82,6 +94,17 @@ allOf:
     then:
       properties:
         rx-tx-swap: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32-uart
+              - st,stm32f7-uart
+    then:
+      properties:
+        rx-threshold: false
+        tx-threshold: false
 
 required:
   - compatible
@@ -96,13 +119,15 @@ examples:
   - |
     #include <dt-bindings/clock/stm32mp1-clks.h>
     usart1: serial@40011000 {
-      compatible = "st,stm32-uart";
+      compatible = "st,stm32h7-uart";
       reg = <0x40011000 0x400>;
       interrupts = <37>;
       clocks = <&rcc 0 164>;
       dmas = <&dma2 2 4 0x414 0x0>,
              <&dma2 7 4 0x414 0x0>;
       dma-names = "rx", "tx";
+      rx-threshold = <4>;
+      tx-threshold = <4>;
       rs485-rts-active-low;
     };
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-04-13 17:40 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-13 17:40 [PATCH v2 0/4] stm32 usart add fifo threshold configuration Erwan Le Ray
2021-04-13 17:40 ` Erwan Le Ray
2021-04-13 17:40 ` [PATCH v2 1/4] dt-bindings: serial: add RX and TX FIFO properties Erwan Le Ray
2021-04-13 17:40   ` Erwan Le Ray
2021-04-15 21:12   ` Rob Herring
2021-04-15 21:12     ` Rob Herring
2021-04-13 17:40 ` Erwan Le Ray [this message]
2021-04-13 17:40   ` [PATCH v2 2/4] dt-bindings: serial: stm32: override FIFO threshold properties Erwan Le Ray
2021-04-15 21:13   ` Rob Herring
2021-04-15 21:13     ` Rob Herring
2021-04-13 17:40 ` [PATCH v2 3/4] dt-bindings: serial: 8250: update TX FIFO trigger level Erwan Le Ray
2021-04-13 17:40   ` Erwan Le Ray
2021-04-15 21:13   ` Rob Herring
2021-04-15 21:13     ` Rob Herring
2021-04-13 17:40 ` [PATCH v2 4/4] serial: stm32: add FIFO threshold configuration Erwan Le Ray
2021-04-13 17:40   ` Erwan Le Ray

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210413174015.23011-3-erwan.leray@foss.st.com \
    --to=erwan.leray@foss.st.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fabrice.gasnier@foss.st.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jslaby@suse.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=valentin.caron@foss.st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.