All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH] iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER
@ 2021-04-14  8:49 Alexandru Ardelean
  2021-04-15 16:58 ` Srinivas Pandruvada
  0 siblings, 1 reply; 3+ messages in thread
From: Alexandru Ardelean @ 2021-04-14  8:49 UTC (permalink / raw)
  To: linux-iio, linux-kernel
  Cc: jic23, linux, Alexandru Ardelean, Thomas Deutschmann,
	Srinivas Pandruvada

During commit 067fda1c065ff ("iio: hid-sensors: move triggered buffer
setup into hid_sensor_setup_trigger"), the
iio_triggered_buffer_{setup,cleanup}() functions got moved under the
hid-sensor-trigger module.

The above change works fine, if any of the sensors get built. However, when
only the common hid-sensor-trigger module gets built (and none of the
drivers), then the IIO_TRIGGERED_BUFFER symbol isn't selected/enforced.

Previously, each driver would enforce/select the IIO_TRIGGERED_BUFFER
symbol. With this change the HID_SENSOR_IIO_TRIGGER (for the
hid-sensor-trigger module) will enforce that IIO_TRIGGERED_BUFFER gets
selected.

All HID sensor drivers select the HID_SENSOR_IIO_TRIGGER symbol. So, this
change removes the IIO_TRIGGERED_BUFFER enforcement from each driver.

Fixes: 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger")
Reported-by: Thomas Deutschmann <whissi@gentoo.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
---
 drivers/iio/accel/Kconfig              | 1 -
 drivers/iio/common/hid-sensors/Kconfig | 1 +
 drivers/iio/gyro/Kconfig               | 1 -
 drivers/iio/humidity/Kconfig           | 1 -
 drivers/iio/light/Kconfig              | 2 --
 drivers/iio/magnetometer/Kconfig       | 1 -
 drivers/iio/orientation/Kconfig        | 2 --
 drivers/iio/pressure/Kconfig           | 1 -
 drivers/iio/temperature/Kconfig        | 1 -
 9 files changed, 1 insertion(+), 10 deletions(-)

diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index cceda3cecbcf..8b1723635cce 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -229,7 +229,6 @@ config DMARD10
 config HID_SENSOR_ACCEL_3D
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID Accelerometers 3D"
diff --git a/drivers/iio/common/hid-sensors/Kconfig b/drivers/iio/common/hid-sensors/Kconfig
index 24d492567336..2a3dd3b907be 100644
--- a/drivers/iio/common/hid-sensors/Kconfig
+++ b/drivers/iio/common/hid-sensors/Kconfig
@@ -19,6 +19,7 @@ config HID_SENSOR_IIO_TRIGGER
 	tristate "Common module (trigger) for all HID Sensor IIO drivers"
 	depends on HID_SENSOR_HUB && HID_SENSOR_IIO_COMMON && IIO_BUFFER
 	select IIO_TRIGGER
+	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build trigger support for HID sensors.
 	  Triggers will be send if all requested attributes were read.
diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
index 5824f2edf975..20b5ac7ab66a 100644
--- a/drivers/iio/gyro/Kconfig
+++ b/drivers/iio/gyro/Kconfig
@@ -111,7 +111,6 @@ config FXAS21002C_SPI
 config HID_SENSOR_GYRO_3D
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID Gyroscope 3D"
diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig
index 6549fcf6db69..2de5494e7c22 100644
--- a/drivers/iio/humidity/Kconfig
+++ b/drivers/iio/humidity/Kconfig
@@ -52,7 +52,6 @@ config HID_SENSOR_HUMIDITY
 	tristate "HID Environmental humidity sensor"
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	help
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 33ad4dd0b5c7..917f9becf9c7 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -256,7 +256,6 @@ config ISL29125
 config HID_SENSOR_ALS
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID ALS"
@@ -270,7 +269,6 @@ config HID_SENSOR_ALS
 config HID_SENSOR_PROX
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID PROX"
diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
index 5d4ffd66032e..74ad5701c6c2 100644
--- a/drivers/iio/magnetometer/Kconfig
+++ b/drivers/iio/magnetometer/Kconfig
@@ -95,7 +95,6 @@ config MAG3110
 config HID_SENSOR_MAGNETOMETER_3D
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID Magenetometer 3D"
diff --git a/drivers/iio/orientation/Kconfig b/drivers/iio/orientation/Kconfig
index a505583cc2fd..396cbbb867f4 100644
--- a/drivers/iio/orientation/Kconfig
+++ b/drivers/iio/orientation/Kconfig
@@ -9,7 +9,6 @@ menu "Inclinometer sensors"
 config HID_SENSOR_INCLINOMETER_3D
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID Inclinometer 3D"
@@ -20,7 +19,6 @@ config HID_SENSOR_INCLINOMETER_3D
 config HID_SENSOR_DEVICE_ROTATION
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID Device Rotation"
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index 689b978db4f9..fc0d3cfca418 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -79,7 +79,6 @@ config DPS310
 config HID_SENSOR_PRESS
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID PRESS"
diff --git a/drivers/iio/temperature/Kconfig b/drivers/iio/temperature/Kconfig
index c5482983f568..f20ae3c963cb 100644
--- a/drivers/iio/temperature/Kconfig
+++ b/drivers/iio/temperature/Kconfig
@@ -45,7 +45,6 @@ config HID_SENSOR_TEMP
 	tristate "HID Environmental temperature sensor"
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	help
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-04-18 10:26 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-14  8:49 [PATCH] iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER Alexandru Ardelean
2021-04-15 16:58 ` Srinivas Pandruvada
2021-04-18 10:26   ` Jonathan Cameron

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.