From: Alexandre Torgue <alexandre.torgue@foss.st.com>
To: <arnd@arndb.de>, <robh+dt@kernel.org>,
Marek Vasut <marex@denx.de>, <jagan@amarulasolutions.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
Marcin Sloniewski <marcin.sloniewski@gmail.com>,
Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-kernel@vger.kernel.org>, Lee Jones <lee.jones@linaro.org>,
<kuba@kernel.org>
Subject: [PATCH 09/13] ARM: dts: stm32: fix stpmic node for stm32mp1 boards
Date: Thu, 15 Apr 2021 12:10:33 +0200 [thread overview]
Message-ID: <20210415101037.1465-10-alexandre.torgue@foss.st.com> (raw)
In-Reply-To: <20210415101037.1465-1-alexandre.torgue@foss.st.com>
On some STM32 MP15 boards, stpmic node is not correct which generates
warnings running "make dtbs_check W=1" command. Issues are:
-"regulator-active-discharge" is not a boolean but an uint32.
-"regulator-over-current-protection" is not a valid entry for vref_ddr.
-LDO4 has a fixed voltage (3v3) so min/max entries are not allowed.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
index 113c48b2ef93..a4b14ef3caee 100644
--- a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
+++ b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
@@ -184,8 +184,6 @@
vdd_usb: ldo4 {
regulator-name = "vdd_usb";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
interrupts = <IT_CURLIM_LDO4 0>;
};
@@ -208,7 +206,6 @@
vref_ddr: vref_ddr {
regulator-name = "vref_ddr";
regulator-always-on;
- regulator-over-current-protection;
};
bst_out: boost {
@@ -219,13 +216,13 @@
vbus_otg: pwr_sw1 {
regulator-name = "vbus_otg";
interrupts = <IT_OCP_OTG 0>;
- regulator-active-discharge;
+ regulator-active-discharge = <1>;
};
vbus_sw: pwr_sw2 {
regulator-name = "vbus_sw";
interrupts = <IT_OCP_SWOUT 0>;
- regulator-active-discharge;
+ regulator-active-discharge = <1>;
};
};
diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
index 6cf49a0a9e69..0c0b66788ea1 100644
--- a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
@@ -173,8 +173,6 @@
vdd_usb: ldo4 {
regulator-name = "vdd_usb";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
interrupts = <IT_CURLIM_LDO4 0>;
};
@@ -197,7 +195,6 @@
vref_ddr: vref_ddr {
regulator-name = "vref_ddr";
regulator-always-on;
- regulator-over-current-protection;
};
bst_out: boost {
@@ -213,7 +210,7 @@
vbus_sw: pwr_sw2 {
regulator-name = "vbus_sw";
interrupts = <IT_OCP_SWOUT 0>;
- regulator-active-discharge;
+ regulator-active-discharge = <1>;
};
};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index 272a1a67a9ad..769fcf74685a 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -327,8 +327,6 @@
vdd_usb: ldo4 {
regulator-name = "vdd_usb";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
interrupts = <IT_CURLIM_LDO4 0>;
};
@@ -350,7 +348,6 @@
vref_ddr: vref_ddr {
regulator-name = "vref_ddr";
regulator-always-on;
- regulator-over-current-protection;
};
bst_out: boost {
@@ -366,7 +363,7 @@
vbus_sw: pwr_sw2 {
regulator-name = "vbus_sw";
interrupts = <IT_OCP_SWOUT 0>;
- regulator-active-discharge;
+ regulator-active-discharge = <1>;
};
};
diff --git a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
index 713485a95795..6706d8311a66 100644
--- a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
@@ -146,8 +146,6 @@
vdd_usb: ldo4 {
regulator-name = "vdd_usb";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
interrupts = <IT_CURLIM_LDO4 0>;
};
@@ -171,7 +169,6 @@
vref_ddr: vref_ddr {
regulator-name = "vref_ddr";
regulator-always-on;
- regulator-over-current-protection;
};
bst_out: boost {
@@ -182,13 +179,13 @@
vbus_otg: pwr_sw1 {
regulator-name = "vbus_otg";
interrupts = <IT_OCP_OTG 0>;
- regulator-active-discharge;
+ regulator-active-discharge = <1>;
};
vbus_sw: pwr_sw2 {
regulator-name = "vbus_sw";
interrupts = <IT_OCP_SWOUT 0>;
- regulator-active-discharge;
+ regulator-active-discharge = <1>;
};
};
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Torgue <alexandre.torgue@foss.st.com>
To: <arnd@arndb.de>, <robh+dt@kernel.org>,
Marek Vasut <marex@denx.de>, <jagan@amarulasolutions.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
Marcin Sloniewski <marcin.sloniewski@gmail.com>,
Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-kernel@vger.kernel.org>, Lee Jones <lee.jones@linaro.org>,
<kuba@kernel.org>
Subject: [PATCH 09/13] ARM: dts: stm32: fix stpmic node for stm32mp1 boards
Date: Thu, 15 Apr 2021 12:10:33 +0200 [thread overview]
Message-ID: <20210415101037.1465-10-alexandre.torgue@foss.st.com> (raw)
In-Reply-To: <20210415101037.1465-1-alexandre.torgue@foss.st.com>
On some STM32 MP15 boards, stpmic node is not correct which generates
warnings running "make dtbs_check W=1" command. Issues are:
-"regulator-active-discharge" is not a boolean but an uint32.
-"regulator-over-current-protection" is not a valid entry for vref_ddr.
-LDO4 has a fixed voltage (3v3) so min/max entries are not allowed.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
index 113c48b2ef93..a4b14ef3caee 100644
--- a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
+++ b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
@@ -184,8 +184,6 @@
vdd_usb: ldo4 {
regulator-name = "vdd_usb";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
interrupts = <IT_CURLIM_LDO4 0>;
};
@@ -208,7 +206,6 @@
vref_ddr: vref_ddr {
regulator-name = "vref_ddr";
regulator-always-on;
- regulator-over-current-protection;
};
bst_out: boost {
@@ -219,13 +216,13 @@
vbus_otg: pwr_sw1 {
regulator-name = "vbus_otg";
interrupts = <IT_OCP_OTG 0>;
- regulator-active-discharge;
+ regulator-active-discharge = <1>;
};
vbus_sw: pwr_sw2 {
regulator-name = "vbus_sw";
interrupts = <IT_OCP_SWOUT 0>;
- regulator-active-discharge;
+ regulator-active-discharge = <1>;
};
};
diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
index 6cf49a0a9e69..0c0b66788ea1 100644
--- a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
@@ -173,8 +173,6 @@
vdd_usb: ldo4 {
regulator-name = "vdd_usb";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
interrupts = <IT_CURLIM_LDO4 0>;
};
@@ -197,7 +195,6 @@
vref_ddr: vref_ddr {
regulator-name = "vref_ddr";
regulator-always-on;
- regulator-over-current-protection;
};
bst_out: boost {
@@ -213,7 +210,7 @@
vbus_sw: pwr_sw2 {
regulator-name = "vbus_sw";
interrupts = <IT_OCP_SWOUT 0>;
- regulator-active-discharge;
+ regulator-active-discharge = <1>;
};
};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index 272a1a67a9ad..769fcf74685a 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -327,8 +327,6 @@
vdd_usb: ldo4 {
regulator-name = "vdd_usb";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
interrupts = <IT_CURLIM_LDO4 0>;
};
@@ -350,7 +348,6 @@
vref_ddr: vref_ddr {
regulator-name = "vref_ddr";
regulator-always-on;
- regulator-over-current-protection;
};
bst_out: boost {
@@ -366,7 +363,7 @@
vbus_sw: pwr_sw2 {
regulator-name = "vbus_sw";
interrupts = <IT_OCP_SWOUT 0>;
- regulator-active-discharge;
+ regulator-active-discharge = <1>;
};
};
diff --git a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
index 713485a95795..6706d8311a66 100644
--- a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
@@ -146,8 +146,6 @@
vdd_usb: ldo4 {
regulator-name = "vdd_usb";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
interrupts = <IT_CURLIM_LDO4 0>;
};
@@ -171,7 +169,6 @@
vref_ddr: vref_ddr {
regulator-name = "vref_ddr";
regulator-always-on;
- regulator-over-current-protection;
};
bst_out: boost {
@@ -182,13 +179,13 @@
vbus_otg: pwr_sw1 {
regulator-name = "vbus_otg";
interrupts = <IT_OCP_OTG 0>;
- regulator-active-discharge;
+ regulator-active-discharge = <1>;
};
vbus_sw: pwr_sw2 {
regulator-name = "vbus_sw";
interrupts = <IT_OCP_SWOUT 0>;
- regulator-active-discharge;
+ regulator-active-discharge = <1>;
};
};
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-04-15 10:11 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-15 10:10 [PATCH 00/13] ARM: dts: stm32: fix "make dtbs_check W=1" round1 Alexandre Torgue
2021-04-15 10:10 ` Alexandre Torgue
2021-04-15 10:10 ` [PATCH 01/13] ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards Alexandre Torgue
2021-04-15 10:10 ` Alexandre Torgue
2021-04-15 10:10 ` [PATCH 02/13] ARM: dts: stm32: fix RCC node name on stm32f429 MCU Alexandre Torgue
2021-04-15 10:10 ` Alexandre Torgue
2021-04-15 10:10 ` [PATCH 03/13] ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings Alexandre Torgue
2021-04-15 10:10 ` Alexandre Torgue
2021-04-16 15:52 ` [Linux-stm32] " Fabrice Gasnier
2021-04-16 15:52 ` Fabrice Gasnier
2021-04-15 10:10 ` [PATCH 04/13] dt-bindings: mfd: stm32-timers: remove #address/size cells from required properties Alexandre Torgue
2021-04-15 10:10 ` Alexandre Torgue
2021-04-16 15:52 ` [Linux-stm32] " Fabrice Gasnier
2021-04-16 15:52 ` Fabrice Gasnier
2021-04-20 20:04 ` Rob Herring
2021-04-20 20:04 ` Rob Herring
2021-06-01 16:26 ` Lee Jones
2021-06-01 16:26 ` Lee Jones
2021-04-15 10:10 ` [PATCH 05/13] ARM: dts: stm32: update pinctrl node name on STM32 MCU to prevent warnings Alexandre Torgue
2021-04-15 10:10 ` Alexandre Torgue
2021-04-15 10:10 ` [PATCH 06/13] ARM: dts: stm32: fix i2c node name on stm32f746 " Alexandre Torgue
2021-04-15 10:10 ` Alexandre Torgue
2021-04-15 10:10 ` [PATCH 07/13] ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15 Alexandre Torgue
2021-04-15 10:10 ` Alexandre Torgue
2021-04-15 10:10 ` [PATCH 08/13] dt-bindings: net: document ptp_ref clk in dwmac Alexandre Torgue
2021-04-15 10:10 ` Alexandre Torgue
2021-04-20 20:05 ` Rob Herring
2021-04-20 20:05 ` Rob Herring
2021-04-15 10:10 ` Alexandre Torgue [this message]
2021-04-15 10:10 ` [PATCH 09/13] ARM: dts: stm32: fix stpmic node for stm32mp1 boards Alexandre Torgue
2021-06-10 14:33 ` Alexandre TORGUE
2021-06-10 14:33 ` Alexandre TORGUE
2021-04-15 10:10 ` [PATCH 10/13] dt-bindings: mfd: add vref_ddr-supply to st,stpmic1 yaml Alexandre Torgue
2021-04-15 10:10 ` [PATCH 10/13] dt-bindings: mfd: add vref_ddr-supply to st, stpmic1 yaml Alexandre Torgue
2021-04-15 10:51 ` [PATCH 10/13] dt-bindings: mfd: add vref_ddr-supply to st,stpmic1 yaml Ahmad Fatoum
2021-04-15 10:51 ` [PATCH 10/13] dt-bindings: mfd: add vref_ddr-supply to st, stpmic1 yaml Ahmad Fatoum
2021-04-15 12:12 ` [PATCH 10/13] dt-bindings: mfd: add vref_ddr-supply to st,stpmic1 yaml Alexandre TORGUE
2021-04-15 12:12 ` [PATCH 10/13] dt-bindings: mfd: add vref_ddr-supply to st, stpmic1 yaml Alexandre TORGUE
2021-04-15 10:10 ` [PATCH 11/13] ARM: dts: stm32: fix LTDC port node on STM32 MCU ad MPU Alexandre Torgue
2021-04-15 10:10 ` Alexandre Torgue
2021-04-15 13:21 ` Marek Vasut
2021-04-15 13:21 ` Marek Vasut
2021-04-15 13:34 ` Alexandre TORGUE
2021-04-15 13:34 ` Alexandre TORGUE
2021-04-15 14:30 ` Marek Vasut
2021-04-15 14:30 ` Marek Vasut
2021-04-15 14:35 ` Alexandre TORGUE
2021-04-15 14:35 ` Alexandre TORGUE
2021-04-15 14:59 ` Marek Vasut
2021-04-15 14:59 ` Marek Vasut
2021-04-15 10:10 ` [PATCH 12/13] ARM: dts: stm32: fix DSI port node on STM32MP15 Alexandre Torgue
2021-04-15 10:10 ` Alexandre Torgue
2021-04-15 10:43 ` Ahmad Fatoum
2021-04-15 10:43 ` Ahmad Fatoum
2021-04-15 12:23 ` Alexandre TORGUE
2021-04-15 12:23 ` Alexandre TORGUE
2021-04-19 13:57 ` Arnd Bergmann
2021-04-19 13:57 ` Arnd Bergmann
2021-04-19 14:04 ` Alexandre TORGUE
2021-04-19 14:04 ` Alexandre TORGUE
2021-05-04 13:16 ` Ahmad Fatoum
2021-05-04 13:16 ` Ahmad Fatoum
2021-04-15 10:10 ` [PATCH 13/13] ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7 Alexandre Torgue
2021-04-15 10:10 ` Alexandre Torgue
2021-06-01 10:37 ` [PATCH 00/13] ARM: dts: stm32: fix "make dtbs_check W=1" round1 Alexandre TORGUE
2021-06-01 10:37 ` Alexandre TORGUE
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210415101037.1465-10-alexandre.torgue@foss.st.com \
--to=alexandre.torgue@foss.st.com \
--cc=a.fatoum@pengutronix.de \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=jagan@amarulasolutions.com \
--cc=kuba@kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=manivannan.sadhasivam@linaro.org \
--cc=marcin.sloniewski@gmail.com \
--cc=marex@denx.de \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.