[PATCH AUTOSEL 5.4 01/14] HID: google: add don USB id

[PATCH AUTOSEL 5.4 01/14] HID: google: add don USB id

[Sasha Levin]

From: Shou-Chieh Hsu <shouchieh@chromium.org>

[ Upstream commit 36b87cf302a4f13f8b4344bcf98f67405a145e2f ]

Add 1 additional hammer-like device.

Signed-off-by: Shou-Chieh Hsu <shouchieh@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-google-hammer.c | 2 ++
 drivers/hid/hid-ids.h           | 1 +
 2 files changed, 3 insertions(+)

diff --git a/drivers/hid/hid-google-hammer.c b/drivers/hid/hid-google-hammer.c
index aeb351658ad3..505ed76a830e 100644
--- a/drivers/hid/hid-google-hammer.c
+++ b/drivers/hid/hid-google-hammer.c
@@ -467,6 +467,8 @@ static int hammer_probe(struct hid_device *hdev,
 
 
 static const struct hid_device_id hammer_devices[] = {
+	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
+		     USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_DON) },
 	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
 		     USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_HAMMER) },
 	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index d004f5645b30..d9e8105045a6 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -488,6 +488,7 @@
 #define USB_DEVICE_ID_GOOGLE_MASTERBALL	0x503c
 #define USB_DEVICE_ID_GOOGLE_MAGNEMITE	0x503d
 #define USB_DEVICE_ID_GOOGLE_MOONBALL	0x5044
+#define USB_DEVICE_ID_GOOGLE_DON	0x5050
 
 #define USB_VENDOR_ID_GOTOP		0x08f2
 #define USB_DEVICE_ID_SUPER_Q2		0x007f
-- 
2.30.2

[PATCH AUTOSEL 5.4 02/14] HID: alps: fix error return code in alps_input_configured()

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit fa8ba6e5dc0e78e409e503ddcfceef5dd96527f4 ]

When input_register_device() fails, no error return code is assigned.
To fix this bug, ret is assigned with -ENOENT as error return code.

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-alps.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/hid/hid-alps.c b/drivers/hid/hid-alps.c
index d33f5abc8f64..2477b2a3f7c3 100644
--- a/drivers/hid/hid-alps.c
+++ b/drivers/hid/hid-alps.c
@@ -762,6 +762,7 @@ static int alps_input_configured(struct hid_device *hdev, struct hid_input *hi)
 
 		if (input_register_device(data->input2)) {
 			input_free_device(input2);
+			ret = -ENOENT;
 			goto exit;
 		}
 	}
-- 
2.30.2

[PATCH AUTOSEL 5.4 03/14] HID: wacom: Assign boolean values to a bool variable

[Sasha Levin]

From: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>

[ Upstream commit e29c62ffb008829dc8bcc0a2ec438adc25a8255e ]

Fix the following coccicheck warnings:

./drivers/hid/wacom_wac.c:2536:2-6: WARNING: Assignment of
0/1 to bool variable.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/wacom_wac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
index f1928c1ac139..01a1f893c06c 100644
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -2533,7 +2533,7 @@ static void wacom_wac_finger_slot(struct wacom_wac *wacom_wac,
 	    !wacom_wac->shared->is_touch_on) {
 		if (!wacom_wac->shared->touch_down)
 			return;
-		prox = 0;
+		prox = false;
 	}
 
 	wacom_wac->hid_data.num_received++;
-- 
2.30.2

[PATCH AUTOSEL 5.4 04/14] ARM: dts: Fix swapped mmc order for omap3

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit a1ebdb3741993f853865d1bd8f77881916ad53a7 ]

Also some omap3 devices like n900 seem to have eMMC and micro-sd swapped
around with commit 21b2cec61c04 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for
drivers that existed in v4.4").

Let's fix the issue with aliases as discussed on the mailing lists. While
the mmc aliases should be board specific, let's first fix the issue with
minimal changes.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap3.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 4043ecb38016..0c8fcfb292bf 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -23,6 +23,9 @@ aliases {
 		i2c0 = &i2c1;
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
-- 
2.30.2

[PATCH AUTOSEL 5.4 05/14] net: geneve: check skb is large enough for IPv4/IPv6 header

[Sasha Levin]

From: Phillip Potter <phil@philpotter.co.uk>

[ Upstream commit 6628ddfec7580882f11fdc5c194a8ea781fdadfa ]

Check within geneve_xmit_skb/geneve6_xmit_skb that sk_buff structure
is large enough to include IPv4 or IPv6 header, and reject if not. The
geneve_xmit_skb portion and overall idea was contributed by Eric Dumazet.
Fixes a KMSAN-found uninit-value bug reported by syzbot at:
https://syzkaller.appspot.com/bug?id=abe95dc3e3e9667fc23b8d81f29ecad95c6f106f

Suggested-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+2e406a9ac75bb71d4b7a@syzkaller.appspotmail.com
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/geneve.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c
index c7ec3d24eabc..c33a08d65208 100644
--- a/drivers/net/geneve.c
+++ b/drivers/net/geneve.c
@@ -891,6 +891,9 @@ static int geneve_xmit_skb(struct sk_buff *skb, struct net_device *dev,
 	__be16 sport;
 	int err;
 
+	if (!pskb_network_may_pull(skb, sizeof(struct iphdr)))
+		return -EINVAL;
+
 	sport = udp_flow_src_port(geneve->net, skb, 1, USHRT_MAX, true);
 	rt = geneve_get_v4_rt(skb, dev, gs4, &fl4, info,
 			      geneve->info.key.tp_dst, sport);
@@ -954,6 +957,9 @@ static int geneve6_xmit_skb(struct sk_buff *skb, struct net_device *dev,
 	__be16 sport;
 	int err;
 
+	if (!pskb_network_may_pull(skb, sizeof(struct ipv6hdr)))
+		return -EINVAL;
+
 	sport = udp_flow_src_port(geneve->net, skb, 1, USHRT_MAX, true);
 	dst = geneve_get_v6_dst(skb, dev, gs6, &fl6, info,
 				geneve->info.key.tp_dst, sport);
-- 
2.30.2

[PATCH AUTOSEL 5.4 06/14] s390/entry: save the caller of psw_idle

[Sasha Levin]

From: Vasily Gorbik <gor@linux.ibm.com>

[ Upstream commit a994eddb947ea9ebb7b14d9a1267001699f0a136 ]

Currently psw_idle does not allocate a stack frame and does not
save its r14 and r15 into the save area. Even though this is valid from
call ABI point of view, because psw_idle does not make any calls
explicitly, in reality psw_idle is an entry point for controlled
transition into serving interrupts. So, in practice, psw_idle stack
frame is analyzed during stack unwinding. Depending on build options
that r14 slot in the save area of psw_idle might either contain a value
saved by previous sibling call or complete garbage.

  [task    0000038000003c28] do_ext_irq+0xd6/0x160
  [task    0000038000003c78] ext_int_handler+0xba/0xe8
  [task   *0000038000003dd8] psw_idle_exit+0x0/0x8 <-- pt_regs
 ([task    0000038000003dd8] 0x0)
  [task    0000038000003e10] default_idle_call+0x42/0x148
  [task    0000038000003e30] do_idle+0xce/0x160
  [task    0000038000003e70] cpu_startup_entry+0x36/0x40
  [task    0000038000003ea0] arch_call_rest_init+0x76/0x80

So, to make a stacktrace nicer and actually point for the real caller of
psw_idle in this frequently occurring case, make psw_idle save its r14.

  [task    0000038000003c28] do_ext_irq+0xd6/0x160
  [task    0000038000003c78] ext_int_handler+0xba/0xe8
  [task   *0000038000003dd8] psw_idle_exit+0x0/0x6 <-- pt_regs
 ([task    0000038000003dd8] arch_cpu_idle+0x3c/0xd0)
  [task    0000038000003e10] default_idle_call+0x42/0x148
  [task    0000038000003e30] do_idle+0xce/0x160
  [task    0000038000003e70] cpu_startup_entry+0x36/0x40
  [task    0000038000003ea0] arch_call_rest_init+0x76/0x80

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/entry.S | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index c544b7a11ebb..5cba1815b8f8 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -993,6 +993,7 @@ ENDPROC(ext_int_handler)
  * Load idle PSW. The second "half" of this function is in .Lcleanup_idle.
  */
 ENTRY(psw_idle)
+	stg	%r14,(__SF_GPRS+8*8)(%r15)
 	stg	%r3,__SF_EMPTY(%r15)
 	larl	%r1,.Lpsw_idle_lpsw+4
 	stg	%r1,__SF_EMPTY+8(%r15)
-- 
2.30.2

[PATCH AUTOSEL 5.4 07/14] xen-netback: Check for hotplug-status existence before watching

[Sasha Levin]

From: Michael Brown <mbrown@fensystems.co.uk>

[ Upstream commit 2afeec08ab5c86ae21952151f726bfe184f6b23d ]

The logic in connect() is currently written with the assumption that
xenbus_watch_pathfmt() will return an error for a node that does not
exist.  This assumption is incorrect: xenstore does allow a watch to
be registered for a nonexistent node (and will send notifications
should the node be subsequently created).

As of commit 1f2565780 ("xen-netback: remove 'hotplug-status' once it
has served its purpose"), this leads to a failure when a domU
transitions into XenbusStateConnected more than once.  On the first
domU transition into Connected state, the "hotplug-status" node will
be deleted by the hotplug_status_changed() callback in dom0.  On the
second or subsequent domU transition into Connected state, the
hotplug_status_changed() callback will therefore never be invoked, and
so the backend will remain stuck in InitWait.

This failure prevents scenarios such as reloading the xen-netfront
module within a domU, or booting a domU via iPXE.  There is
unfortunately no way for the domU to work around this dom0 bug.

Fix by explicitly checking for existence of the "hotplug-status" node,
thereby creating the behaviour that was previously assumed to exist.

Signed-off-by: Michael Brown <mbrown@fensystems.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/xen-netback/xenbus.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/net/xen-netback/xenbus.c b/drivers/net/xen-netback/xenbus.c
index 9e61a6f29464..416305e6d093 100644
--- a/drivers/net/xen-netback/xenbus.c
+++ b/drivers/net/xen-netback/xenbus.c
@@ -979,11 +979,15 @@ static void connect(struct backend_info *be)
 	xenvif_carrier_on(be->vif);
 
 	unregister_hotplug_status_watch(be);
-	err = xenbus_watch_pathfmt(dev, &be->hotplug_status_watch, NULL,
-				   hotplug_status_changed,
-				   "%s/%s", dev->nodename, "hotplug-status");
-	if (!err)
+	if (xenbus_exists(XBT_NIL, dev->nodename, "hotplug-status")) {
+		err = xenbus_watch_pathfmt(dev, &be->hotplug_status_watch,
+					   NULL, hotplug_status_changed,
+					   "%s/%s", dev->nodename,
+					   "hotplug-status");
+		if (err)
+			goto err;
 		be->have_hotplug_status_watch = 1;
+	}
 
 	netif_tx_wake_all_queues(be->vif->dev);
 
-- 
2.30.2

[PATCH AUTOSEL 5.4 08/14] cavium/liquidio: Fix duplicate argument

[Sasha Levin]

From: Wan Jiabing <wanjiabing@vivo.com>

[ Upstream commit 416dcc5ce9d2a810477171c62ffa061a98f87367 ]

Fix the following coccicheck warning:

./drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h:413:6-28:
duplicated argument to & or |

The CN6XXX_INTR_M1UPB0_ERR here is duplicate.
Here should be CN6XXX_INTR_M1UNB0_ERR.

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h b/drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h
index b248966837b4..7aad40b2aa73 100644
--- a/drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h
+++ b/drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h
@@ -412,7 +412,7 @@
 	   | CN6XXX_INTR_M0UNWI_ERR             \
 	   | CN6XXX_INTR_M1UPB0_ERR             \
 	   | CN6XXX_INTR_M1UPWI_ERR             \
-	   | CN6XXX_INTR_M1UPB0_ERR             \
+	   | CN6XXX_INTR_M1UNB0_ERR             \
 	   | CN6XXX_INTR_M1UNWI_ERR             \
 	   | CN6XXX_INTR_INSTR_DB_OF_ERR        \
 	   | CN6XXX_INTR_SLIST_DB_OF_ERR        \
-- 
2.30.2

[PATCH AUTOSEL 5.4 09/14] i2c: mv64xxx: Fix random system lock caused by runtime PM

[Sasha Levin]

From: Marek Behún <kabel@kernel.org>

[ Upstream commit 39930213e7779b9c4257499972b8afb8858f1a2d ]

I noticed a weird bug with this driver on Marvell CN9130 Customer
Reference Board.

Sometime after boot, the system locks with the following message:
 [104.071363] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0

The system does not respond afterwards, only warns about RCU stalls.

This first appeared with commit e5c02cf54154 ("i2c: mv64xxx: Add runtime
PM support").

With further experimentation I discovered that adding a delay into
mv64xxx_i2c_hw_init() fixes this issue. This function is called before
every xfer, due to how runtime PM works in this driver. It seems that in
order to work correctly, a delay is needed after the bus is reset in
this function.

Since there already is a known erratum with this controller needing a
delay, I assume that this is just another place this needs to be
applied. Therefore I apply the delay only if errata_delay is true.

Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-mv64xxx.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index a5a95ea5b81a..7409cfba2195 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -218,6 +218,10 @@ mv64xxx_i2c_hw_init(struct mv64xxx_i2c_data *drv_data)
 	writel(0, drv_data->reg_base + drv_data->reg_offsets.ext_addr);
 	writel(MV64XXX_I2C_REG_CONTROL_TWSIEN | MV64XXX_I2C_REG_CONTROL_STOP,
 		drv_data->reg_base + drv_data->reg_offsets.control);
+
+	if (drv_data->errata_delay)
+		udelay(5);
+
 	drv_data->state = MV64XXX_I2C_STATE_IDLE;
 }
 
-- 
2.30.2

[PATCH AUTOSEL 5.4 10/14] csky: change a Kconfig symbol name to fix e1000 build error

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit d199161653d612b8fb96ac51bfd5b2d2782ecef3 ]

e1000's #define of CONFIG_RAM_BASE conflicts with a Kconfig symbol in
arch/csky/Kconfig.

The symbol in e1000 has been around longer, so change arch/csky/ to use
DRAM_BASE instead of RAM_BASE to remove the conflict.  (although e1000
is also a 2-line change)

Link: https://lkml.kernel.org/r/20210411055335.7111-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Guo Ren <guoren@kernel.org>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/csky/Kconfig            | 2 +-
 arch/csky/include/asm/page.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/csky/Kconfig b/arch/csky/Kconfig
index 48b2e1b59119..4f48a2f0513b 100644
--- a/arch/csky/Kconfig
+++ b/arch/csky/Kconfig
@@ -220,7 +220,7 @@ config FORCE_MAX_ZONEORDER
 	int "Maximum zone order"
 	default "11"
 
-config RAM_BASE
+config DRAM_BASE
 	hex "DRAM start addr (the same with memory-section in dts)"
 	default 0x0
 
diff --git a/arch/csky/include/asm/page.h b/arch/csky/include/asm/page.h
index 9738eacefdc7..62bb307459ca 100644
--- a/arch/csky/include/asm/page.h
+++ b/arch/csky/include/asm/page.h
@@ -28,7 +28,7 @@
 #define SSEG_SIZE	0x20000000
 #define LOWMEM_LIMIT	(SSEG_SIZE * 2)
 
-#define PHYS_OFFSET_OFFSET (CONFIG_RAM_BASE & (SSEG_SIZE - 1))
+#define PHYS_OFFSET_OFFSET (CONFIG_DRAM_BASE & (SSEG_SIZE - 1))
 
 #ifndef __ASSEMBLY__
 
-- 
2.30.2

[PATCH AUTOSEL 5.4 11/14] ia64: fix discontig.c section mismatches

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit e2af9da4f867a1a54f1252bf3abc1a5c63951778 ]

Fix IA64 discontig.c Section mismatch warnings.

When CONFIG_SPARSEMEM=y and CONFIG_MEMORY_HOTPLUG=y, the functions
computer_pernodesize() and scatter_node_data() should not be marked as
__meminit because they are needed after init, on any memory hotplug
event.  Also, early_nr_cpus_node() is called by compute_pernodesize(),
so early_nr_cpus_node() cannot be __meminit either.

  WARNING: modpost: vmlinux.o(.text.unlikely+0x1612): Section mismatch in reference from the function arch_alloc_nodedata() to the function .meminit.text:compute_pernodesize()
  The function arch_alloc_nodedata() references the function __meminit compute_pernodesize().
  This is often because arch_alloc_nodedata lacks a __meminit annotation or the annotation of compute_pernodesize is wrong.

  WARNING: modpost: vmlinux.o(.text.unlikely+0x1692): Section mismatch in reference from the function arch_refresh_nodedata() to the function .meminit.text:scatter_node_data()
  The function arch_refresh_nodedata() references the function __meminit scatter_node_data().
  This is often because arch_refresh_nodedata lacks a __meminit annotation or the annotation of scatter_node_data is wrong.

  WARNING: modpost: vmlinux.o(.text.unlikely+0x1502): Section mismatch in reference from the function compute_pernodesize() to the function .meminit.text:early_nr_cpus_node()
  The function compute_pernodesize() references the function __meminit early_nr_cpus_node().
  This is often because compute_pernodesize lacks a __meminit annotation or the annotation of early_nr_cpus_node is wrong.

Link: https://lkml.kernel.org/r/20210411001201.3069-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/ia64/mm/discontig.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index 4f33f6e7e206..41d243c0c626 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -95,7 +95,7 @@ static int __init build_node_maps(unsigned long start, unsigned long len,
  * acpi_boot_init() (which builds the node_to_cpu_mask array) hasn't been
  * called yet.  Note that node 0 will also count all non-existent cpus.
  */
-static int __meminit early_nr_cpus_node(int node)
+static int early_nr_cpus_node(int node)
 {
 	int cpu, n = 0;
 
@@ -110,7 +110,7 @@ static int __meminit early_nr_cpus_node(int node)
  * compute_pernodesize - compute size of pernode data
  * @node: the node id.
  */
-static unsigned long __meminit compute_pernodesize(int node)
+static unsigned long compute_pernodesize(int node)
 {
 	unsigned long pernodesize = 0, cpus;
 
@@ -367,7 +367,7 @@ static void __init reserve_pernode_space(void)
 	}
 }
 
-static void __meminit scatter_node_data(void)
+static void scatter_node_data(void)
 {
 	pg_data_t **dst;
 	int node;
-- 
2.30.2

[PATCH AUTOSEL 5.4 11/14] ia64: fix discontig.c section mismatches

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit e2af9da4f867a1a54f1252bf3abc1a5c63951778 ]

Fix IA64 discontig.c Section mismatch warnings.

When CONFIG_SPARSEMEM=y and CONFIG_MEMORY_HOTPLUG=y, the functions
computer_pernodesize() and scatter_node_data() should not be marked as
__meminit because they are needed after init, on any memory hotplug
event.  Also, early_nr_cpus_node() is called by compute_pernodesize(),
so early_nr_cpus_node() cannot be __meminit either.

  WARNING: modpost: vmlinux.o(.text.unlikely+0x1612): Section mismatch in reference from the function arch_alloc_nodedata() to the function .meminit.text:compute_pernodesize()
  The function arch_alloc_nodedata() references the function __meminit compute_pernodesize().
  This is often because arch_alloc_nodedata lacks a __meminit annotation or the annotation of compute_pernodesize is wrong.

  WARNING: modpost: vmlinux.o(.text.unlikely+0x1692): Section mismatch in reference from the function arch_refresh_nodedata() to the function .meminit.text:scatter_node_data()
  The function arch_refresh_nodedata() references the function __meminit scatter_node_data().
  This is often because arch_refresh_nodedata lacks a __meminit annotation or the annotation of scatter_node_data is wrong.

  WARNING: modpost: vmlinux.o(.text.unlikely+0x1502): Section mismatch in reference from the function compute_pernodesize() to the function .meminit.text:early_nr_cpus_node()
  The function compute_pernodesize() references the function __meminit early_nr_cpus_node().
  This is often because compute_pernodesize lacks a __meminit annotation or the annotation of early_nr_cpus_node is wrong.

Link: https://lkml.kernel.org/r/20210411001201.3069-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/ia64/mm/discontig.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index 4f33f6e7e206..41d243c0c626 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -95,7 +95,7 @@ static int __init build_node_maps(unsigned long start, unsigned long len,
  * acpi_boot_init() (which builds the node_to_cpu_mask array) hasn't been
  * called yet.  Note that node 0 will also count all non-existent cpus.
  */
-static int __meminit early_nr_cpus_node(int node)
+static int early_nr_cpus_node(int node)
 {
 	int cpu, n = 0;
 
@@ -110,7 +110,7 @@ static int __meminit early_nr_cpus_node(int node)
  * compute_pernodesize - compute size of pernode data
  * @node: the node id.
  */
-static unsigned long __meminit compute_pernodesize(int node)
+static unsigned long compute_pernodesize(int node)
 {
 	unsigned long pernodesize = 0, cpus;
 
@@ -367,7 +367,7 @@ static void __init reserve_pernode_space(void)
 	}
 }
 
-static void __meminit scatter_node_data(void)
+static void scatter_node_data(void)
 {
 	pg_data_t **dst;
 	int node;
-- 
2.30.2

[PATCH AUTOSEL 5.4 12/14] ia64: tools: remove duplicate definition of ia64_mf() on ia64

[Sasha Levin]

From: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

[ Upstream commit f4bf09dc3aaa4b07cd15630f2023f68cb2668809 ]

The ia64_mf() macro defined in tools/arch/ia64/include/asm/barrier.h is
already defined in <asm/gcc_intrin.h> on ia64 which causes libbpf
failing to build:

    CC       /usr/src/linux/tools/bpf/bpftool//libbpf/staticobjs/libbpf.o
  In file included from /usr/src/linux/tools/include/asm/barrier.h:24,
                   from /usr/src/linux/tools/include/linux/ring_buffer.h:4,
                   from libbpf.c:37:
  /usr/src/linux/tools/include/asm/../../arch/ia64/include/asm/barrier.h:43: error: "ia64_mf" redefined [-Werror]
     43 | #define ia64_mf()       asm volatile ("mf" ::: "memory")
        |
  In file included from /usr/include/ia64-linux-gnu/asm/intrinsics.h:20,
                   from /usr/include/ia64-linux-gnu/asm/swab.h:11,
                   from /usr/include/linux/swab.h:8,
                   from /usr/include/linux/byteorder/little_endian.h:13,
                   from /usr/include/ia64-linux-gnu/asm/byteorder.h:5,
                   from /usr/src/linux/tools/include/uapi/linux/perf_event.h:20,
                   from libbpf.c:36:
  /usr/include/ia64-linux-gnu/asm/gcc_intrin.h:382: note: this is the location of the previous definition
    382 | #define ia64_mf() __asm__ volatile ("mf" ::: "memory")
        |
  cc1: all warnings being treated as errors

Thus, remove the definition from tools/arch/ia64/include/asm/barrier.h.

Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/arch/ia64/include/asm/barrier.h | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/tools/arch/ia64/include/asm/barrier.h b/tools/arch/ia64/include/asm/barrier.h
index 4d471d9511a5..6fffe5682713 100644
--- a/tools/arch/ia64/include/asm/barrier.h
+++ b/tools/arch/ia64/include/asm/barrier.h
@@ -39,9 +39,6 @@
  * sequential memory pages only.
  */
 
-/* XXX From arch/ia64/include/uapi/asm/gcc_intrin.h */
-#define ia64_mf()       asm volatile ("mf" ::: "memory")
-
 #define mb()		ia64_mf()
 #define rmb()		mb()
 #define wmb()		mb()
-- 
2.30.2

[PATCH AUTOSEL 5.4 13/14] gcov: clang: fix clang-11+ build

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 04c53de57cb6435738961dace8b1b71d3ecd3c39 ]

With clang-11+, the code is broken due to my kvmalloc() conversion
(which predated the clang-11 support code) leaving one vmalloc() in
place.  Fix that.

Link: https://lkml.kernel.org/r/20210412214210.6e1ecca9cdc5.I24459763acf0591d5e6b31c7e3a59890d802f79c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/gcov/clang.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/gcov/clang.c b/kernel/gcov/clang.c
index c466c7fbdece..b81f2823630d 100644
--- a/kernel/gcov/clang.c
+++ b/kernel/gcov/clang.c
@@ -369,7 +369,7 @@ static struct gcov_fn_info *gcov_fn_info_dup(struct gcov_fn_info *fn)
 	INIT_LIST_HEAD(&fn_dup->head);
 
 	cv_size = fn->num_counters * sizeof(fn->counters[0]);
-	fn_dup->counters = vmalloc(cv_size);
+	fn_dup->counters = kvmalloc(cv_size, GFP_KERNEL);
 	if (!fn_dup->counters) {
 		kfree(fn_dup);
 		return NULL;
-- 
2.30.2

Re: [PATCH AUTOSEL 5.4 13/14] gcov: clang: fix clang-11+ build

[Johannes Berg]

On Mon, 2021-04-19 at 20:44 +0000, Sasha Levin wrote:
> From: Johannes Berg <johannes.berg@intel.com>
> 
> [ Upstream commit 04c53de57cb6435738961dace8b1b71d3ecd3c39 ]
> 
> With clang-11+, the code is broken due to my kvmalloc() conversion
> (which predated the clang-11 support code) leaving one vmalloc() in
> place.  Fix that.

This patch might *apply* on 5.4 (and the other kernels you selected it
for), but then I'm pretty sure it'll be broken, unless you also applied
the various patches this was actually fixing (my kvmalloc conversion,
and the clang-11 support).

Also, Linus has (correctly) reverted this patch from mainline, it
shouldn't have gone there in the first place, probably really should be
squashed into my kvmalloc conversion patch that's in -mm now.

Sorry if I didn't make that clear enough at the time.


In any case, please drop this patch from all stable trees.

johannes

Re: [PATCH AUTOSEL 5.4 13/14] gcov: clang: fix clang-11+ build

[Sasha Levin]

On Tue, Apr 20, 2021 at 09:01:19AM +0200, Johannes Berg wrote:
>On Mon, 2021-04-19 at 20:44 +0000, Sasha Levin wrote:
>> From: Johannes Berg <johannes.berg@intel.com>
>>
>> [ Upstream commit 04c53de57cb6435738961dace8b1b71d3ecd3c39 ]
>>
>> With clang-11+, the code is broken due to my kvmalloc() conversion
>> (which predated the clang-11 support code) leaving one vmalloc() in
>> place.  Fix that.
>
>This patch might *apply* on 5.4 (and the other kernels you selected it
>for), but then I'm pretty sure it'll be broken, unless you also applied
>the various patches this was actually fixing (my kvmalloc conversion,
>and the clang-11 support).
>
>Also, Linus has (correctly) reverted this patch from mainline, it
>shouldn't have gone there in the first place, probably really should be
>squashed into my kvmalloc conversion patch that's in -mm now.
>
>Sorry if I didn't make that clear enough at the time.
>
>
>In any case, please drop this patch from all stable trees.

Will do, thanks!

-- 
Thanks,
Sasha

[PATCH AUTOSEL 5.4 14/14] readdir: make sure to verify directory entry for legacy interfaces too

[Sasha Levin]

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit 0c93ac69407d63a85be0129aa55ffaec27ffebd3 ]

This does the directory entry name verification for the legacy
"fillonedir" (and compat) interface that goes all the way back to the
dark ages before we had a proper dirent, and the readdir() system call
returned just a single entry at a time.

Nobody should use this interface unless you still have binaries from
1991, but let's do it right.

This came up during discussions about unsafe_copy_to_user() and proper
checking of all the inputs to it, as the networking layer is looking to
use it in a few new places.  So let's make sure the _old_ users do it
all right and proper, before we add new ones.

See also commit 8a23eb804ca4 ("Make filldir[64]() verify the directory
entry filename is valid") which did the proper modern interfaces that
people actually use. It had a note:

    Note that I didn't bother adding the checks to any legacy interfaces
    that nobody uses.

which this now corrects.  Note that we really don't care about POSIX and
the presense of '/' in a directory entry, but verify_dirent_name() also
ends up doing the proper name length verification which is what the
input checking discussion was about.

[ Another option would be to remove the support for this particular very
  old interface: any binaries that use it are likely a.out binaries, and
  they will no longer run anyway since we removed a.out binftm support
  in commit eac616557050 ("x86: Deprecate a.out support").

  But I'm not sure which came first: getdents() or ELF support, so let's
  pretend somebody might still have a working binary that uses the
  legacy readdir() case.. ]

Link: https://lore.kernel.org/lkml/CAHk-=wjbvzCAhAtvG0d81W5o0-KT5PPTHhfJ5ieDFq+bGtgOYg@mail.gmail.com/
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/readdir.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/fs/readdir.c b/fs/readdir.c
index de2eceffdee8..07a3b5baa404 100644
--- a/fs/readdir.c
+++ b/fs/readdir.c
@@ -150,6 +150,9 @@ static int fillonedir(struct dir_context *ctx, const char *name, int namlen,
 
 	if (buf->result)
 		return -EINVAL;
+	buf->result = verify_dirent_name(name, namlen);
+	if (buf->result < 0)
+		return buf->result;
 	d_ino = ino;
 	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
 		buf->result = -EOVERFLOW;
@@ -417,6 +420,9 @@ static int compat_fillonedir(struct dir_context *ctx, const char *name,
 
 	if (buf->result)
 		return -EINVAL;
+	buf->result = verify_dirent_name(name, namlen);
+	if (buf->result < 0)
+		return buf->result;
 	d_ino = ino;
 	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
 		buf->result = -EOVERFLOW;
-- 
2.30.2