All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dave Gerlach <d-gerlach@ti.com>
To: u-boot@lists.denx.de
Subject: [PATCH 16/17] configs: am64x_evm_r5: Add Initial support
Date: Fri, 23 Apr 2021 11:27:47 -0500	[thread overview]
Message-ID: <20210423162748.1952-17-d-gerlach@ti.com> (raw)
In-Reply-To: <20210423162748.1952-1-d-gerlach@ti.com>

Add initial R5 defconfig support for AM64x SoCs.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
---
 configs/am64x_evm_r5_defconfig | 91 ++++++++++++++++++++++++++++++++++
 1 file changed, 91 insertions(+)
 create mode 100644 configs/am64x_evm_r5_defconfig

diff --git a/configs/am64x_evm_r5_defconfig b/configs/am64x_evm_r5_defconfig
new file mode 100644
index 000000000000..0fa4ae90b59b
--- /dev/null
+++ b/configs/am64x_evm_r5_defconfig
@@ -0,0 +1,91 @@
+CONFIG_ARM=y
+CONFIG_ARCH_K3=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x80000
+CONFIG_SOC_K3_AM642=y
+CONFIG_TARGET_AM642_R5_EVM=y
+CONFIG_ENV_SIZE=0x20000
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
+CONFIG_SPL_DM_SPI=y
+CONFIG_SPL_TEXT_BASE=0x70020000
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
+CONFIG_SPL_FS_FAT=y
+CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="k3-am642-r5-evm"
+CONFIG_SPL_LOAD_FIT=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_EARLY_BSS=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_DM_MAILBOX=y
+CONFIG_SPL_DM_SPI_FLASH=y
+CONFIG_SPL_DM_RESET=y
+CONFIG_SPL_POWER_DOMAIN=y
+CONFIG_SPL_REMOTEPROC=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SPL_YMODEM_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_REMOTEPROC=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_SPL_MULTI_DTB_FIT=y
+CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
+CONFIG_ENV_IS_IN_FAT=y
+CONFIG_ENV_FAT_DEVICE_AND_PART="1:1"
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_DM=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_CLK_TI_SCI=y
+CONFIG_TI_SCI_PROTOCOL=y
+CONFIG_DM_MAILBOX=y
+CONFIG_K3_SEC_PROXY=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ADMA=y
+CONFIG_SPL_MMC_SDHCI_ADMA=y
+CONFIG_MMC_SDHCI_AM654=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_MODE=0
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PINCTRL=y
+# CONFIG_PINCTRL_GENERIC is not set
+CONFIG_SPL_PINCTRL=y
+# CONFIG_SPL_PINCTRL_GENERIC is not set
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_TI_SCI_POWER_DOMAIN=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_K3_SYSTEM_CONTROLLER=y
+CONFIG_REMOTEPROC_TI_K3_ARM64=y
+CONFIG_DM_RESET=y
+CONFIG_RESET_TI_SCI=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_DM_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_CADENCE_QSPI=y
+CONFIG_TIMER=y
+CONFIG_SPL_TIMER=y
+CONFIG_OMAP_TIMER=y
+CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
-- 
2.28.0

  parent reply	other threads:[~2021-04-23 16:27 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-23 16:27 [PATCH 00/17] arm: mach-k3: Initial Support for Texas Instruments AM642 Platform Dave Gerlach
2021-04-23 16:27 ` [PATCH 01/17] arm: mach-k3: Add basic support for AM642 SoC definition Dave Gerlach
2021-04-23 16:27 ` [PATCH 02/17] arm: mach-k3: am642: Add support for boot device detection Dave Gerlach
2021-04-23 16:27 ` [PATCH 03/17] arm: mach-k3: am642: Unlock all applicable control MMR registers Dave Gerlach
2021-04-23 16:27 ` [PATCH 04/17] arm: mach-k3: am642: Store boot info from ROM Dave Gerlach
2021-04-23 16:27 ` [PATCH 05/17] arm: mach-k3: am642: Load SYSFW binary and config from boot media Dave Gerlach
2021-04-23 16:27 ` [PATCH 06/17] arm: mach-k3: am642: Use mmc start and stop callbacks Dave Gerlach
2021-04-23 16:27 ` [PATCH 07/17] arm: mach-k3: am642: Shut down R5 core after ATF startup on A53 Dave Gerlach
2021-04-23 16:27 ` [PATCH 08/17] armv8: mach-k3: am642: Add custom MMU support Dave Gerlach
2021-04-23 16:27 ` [PATCH 09/17] mmc: sdhci_am654: Add Support for TI's AM642 SoC Dave Gerlach
2021-04-23 16:27 ` [PATCH 10/17] mailbox: k3-sec-proxy: Extend valid thread IDs Dave Gerlach
2021-04-23 16:27 ` [PATCH 11/17] board: ti: am64x: Add board support for am64x evm Dave Gerlach
2021-04-23 16:27 ` [PATCH 12/17] dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64 Dave Gerlach
2021-04-23 16:27 ` [PATCH 13/17] arm: dts: ti: Add Support for AM642 SoC Dave Gerlach
2021-04-23 16:27 ` [PATCH 14/17] arm: dts: k3-am642: Add initial support for EVM Dave Gerlach
2021-04-23 16:27 ` [PATCH 15/17] arm: dts: k3-am642: Add r5 specific dt support Dave Gerlach
2021-04-23 16:27 ` Dave Gerlach [this message]
2021-04-23 16:27 ` [PATCH 17/17] configs: am64x_evm_a53: Add Initial support Dave Gerlach
2021-05-06 17:54   ` Vignesh Raghavendra
2021-05-07 11:23     ` Vignesh Raghavendra
2021-05-06  8:02 ` [PATCH 00/17] arm: mach-k3: Initial Support for Texas Instruments AM642 Platform Lokesh Vutla
2021-05-06 12:22   ` Lokesh Vutla
2021-05-12 13:58 ` Lokesh Vutla

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210423162748.1952-17-d-gerlach@ti.com \
    --to=d-gerlach@ti.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.