From: Dave Gerlach <d-gerlach@ti.com>
To: u-boot@lists.denx.de
Subject: [PATCH 00/17] arm: mach-k3: Initial Support for Texas Instruments AM642 Platform
Date: Fri, 23 Apr 2021 11:27:31 -0500 [thread overview]
Message-ID: <20210423162748.1952-1-d-gerlach@ti.com> (raw)
Hi,
This series adds initial support for the latest new SoC, AM642,
from Texas Instruments.
Additional detail can be found in the patch descriptions, also
see AM64X Technical Reference Manual (SPRUIM2, Revised Jan 2021)
for further details: https://www.ti.com/lit/pdf/spruim2
Regards,
Dave
Dave Gerlach (14):
arm: mach-k3: Add basic support for AM642 SoC definition
arm: mach-k3: am642: Unlock all applicable control MMR registers
arm: mach-k3: am642: Store boot info from ROM
arm: mach-k3: am642: Load SYSFW binary and config from boot media
arm: mach-k3: am642: Use mmc start and stop callbacks
mmc: sdhci_am654: Add Support for TI's AM642 SoC
mailbox: k3-sec-proxy: Extend valid thread IDs
board: ti: am64x: Add board support for am64x evm
dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64
arm: dts: ti: Add Support for AM642 SoC
arm: dts: k3-am642: Add initial support for EVM
arm: dts: k3-am642: Add r5 specific dt support
configs: am64x_evm_r5: Add Initial support
configs: am64x_evm_a53: Add Initial support
Keerthy (2):
arm: mach-k3: am642: Add support for boot device detection
armv8: mach-k3: am642: Add custom MMU support
Suman Anna (1):
arm: mach-k3: am642: Shut down R5 core after ATF startup on A53
arch/arm/dts/Makefile | 2 +
arch/arm/dts/k3-am64-main.dtsi | 405 ++++++++++++++++++
arch/arm/dts/k3-am64-mcu.dtsi | 76 ++++
arch/arm/dts/k3-am64.dtsi | 103 +++++
arch/arm/dts/k3-am642-evm-u-boot.dtsi | 58 +++
arch/arm/dts/k3-am642-evm.dts | 246 +++++++++++
arch/arm/dts/k3-am642-r5-evm.dts | 169 ++++++++
arch/arm/dts/k3-am642.dtsi | 65 +++
arch/arm/mach-k3/Kconfig | 15 +-
arch/arm/mach-k3/Makefile | 1 +
arch/arm/mach-k3/am642_init.c | 283 ++++++++++++
arch/arm/mach-k3/arm64-mmu.c | 41 ++
arch/arm/mach-k3/include/mach/am64_hardware.h | 52 +++
arch/arm/mach-k3/include/mach/am64_spl.h | 44 ++
arch/arm/mach-k3/include/mach/hardware.h | 4 +
arch/arm/mach-k3/include/mach/spl.h | 4 +
board/ti/am64x/Kconfig | 53 +++
board/ti/am64x/Makefile | 8 +
board/ti/am64x/evm.c | 48 +++
configs/am64x_evm_a53_defconfig | 96 +++++
configs/am64x_evm_r5_defconfig | 91 ++++
drivers/mailbox/k3-sec-proxy.c | 10 +-
drivers/mmc/am654_sdhci.c | 18 +
include/configs/am64x_evm.h | 105 +++++
include/dt-bindings/pinctrl/k3.h | 5 +-
25 files changed, 1988 insertions(+), 14 deletions(-)
create mode 100644 arch/arm/dts/k3-am64-main.dtsi
create mode 100644 arch/arm/dts/k3-am64-mcu.dtsi
create mode 100644 arch/arm/dts/k3-am64.dtsi
create mode 100644 arch/arm/dts/k3-am642-evm-u-boot.dtsi
create mode 100644 arch/arm/dts/k3-am642-evm.dts
create mode 100644 arch/arm/dts/k3-am642-r5-evm.dts
create mode 100644 arch/arm/dts/k3-am642.dtsi
create mode 100644 arch/arm/mach-k3/am642_init.c
create mode 100644 arch/arm/mach-k3/include/mach/am64_hardware.h
create mode 100644 arch/arm/mach-k3/include/mach/am64_spl.h
create mode 100644 board/ti/am64x/Kconfig
create mode 100644 board/ti/am64x/Makefile
create mode 100644 board/ti/am64x/evm.c
create mode 100644 configs/am64x_evm_a53_defconfig
create mode 100644 configs/am64x_evm_r5_defconfig
create mode 100644 include/configs/am64x_evm.h
--
2.28.0
next reply other threads:[~2021-04-23 16:27 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-23 16:27 Dave Gerlach [this message]
2021-04-23 16:27 ` [PATCH 01/17] arm: mach-k3: Add basic support for AM642 SoC definition Dave Gerlach
2021-04-23 16:27 ` [PATCH 02/17] arm: mach-k3: am642: Add support for boot device detection Dave Gerlach
2021-04-23 16:27 ` [PATCH 03/17] arm: mach-k3: am642: Unlock all applicable control MMR registers Dave Gerlach
2021-04-23 16:27 ` [PATCH 04/17] arm: mach-k3: am642: Store boot info from ROM Dave Gerlach
2021-04-23 16:27 ` [PATCH 05/17] arm: mach-k3: am642: Load SYSFW binary and config from boot media Dave Gerlach
2021-04-23 16:27 ` [PATCH 06/17] arm: mach-k3: am642: Use mmc start and stop callbacks Dave Gerlach
2021-04-23 16:27 ` [PATCH 07/17] arm: mach-k3: am642: Shut down R5 core after ATF startup on A53 Dave Gerlach
2021-04-23 16:27 ` [PATCH 08/17] armv8: mach-k3: am642: Add custom MMU support Dave Gerlach
2021-04-23 16:27 ` [PATCH 09/17] mmc: sdhci_am654: Add Support for TI's AM642 SoC Dave Gerlach
2021-04-23 16:27 ` [PATCH 10/17] mailbox: k3-sec-proxy: Extend valid thread IDs Dave Gerlach
2021-04-23 16:27 ` [PATCH 11/17] board: ti: am64x: Add board support for am64x evm Dave Gerlach
2021-04-23 16:27 ` [PATCH 12/17] dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64 Dave Gerlach
2021-04-23 16:27 ` [PATCH 13/17] arm: dts: ti: Add Support for AM642 SoC Dave Gerlach
2021-04-23 16:27 ` [PATCH 14/17] arm: dts: k3-am642: Add initial support for EVM Dave Gerlach
2021-04-23 16:27 ` [PATCH 15/17] arm: dts: k3-am642: Add r5 specific dt support Dave Gerlach
2021-04-23 16:27 ` [PATCH 16/17] configs: am64x_evm_r5: Add Initial support Dave Gerlach
2021-04-23 16:27 ` [PATCH 17/17] configs: am64x_evm_a53: " Dave Gerlach
2021-05-06 17:54 ` Vignesh Raghavendra
2021-05-07 11:23 ` Vignesh Raghavendra
2021-05-06 8:02 ` [PATCH 00/17] arm: mach-k3: Initial Support for Texas Instruments AM642 Platform Lokesh Vutla
2021-05-06 12:22 ` Lokesh Vutla
2021-05-12 13:58 ` Lokesh Vutla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210423162748.1952-1-d-gerlach@ti.com \
--to=d-gerlach@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.