All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Sebastian Reichel <sebastian.reichel@collabora.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Alessandro Zummo <a.zummo@towertech.it>,
	David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Saravana Kannan <saravanak@google.com>,
	devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-rtc@vger.kernel.org,
	linux-mtd@lists.infradead.org, kernel@collabora.com
Subject: [PATCHv2 0/5] Support for GE B1x5v2 and B1x5Pv2
Date: Thu, 29 Apr 2021 00:29:48 +0200	[thread overview]
Message-ID: <20210428222953.235280-1-sebastian.reichel@collabora.com> (raw)

Hi,

This series adds support for another General Electric patient
monitor series (similar to existing Bx50v3), which is based on
i.MX6DL using Congatec's QMX6 module.

The module uses an I2C RTC to provide the i.MX6 32768 Hz clock,
so it's important to keep it enabled. Not doing so results in
incorrect timings of watchdog and i.MX6 RTC. The bootloader
enables the watchdog, so disabling the clock results in system
reboot. [0]

The second patch is required for B155v2, which uses a 1366x768
G156XTN01 panel. The 1366 width is not supported by the display
pipeline and result in boot hanging without the patch. [1]

Patches 3+4 are updating DT bindings for the new board compatible
values.

Patch 5 adds the board files.

Changes since PATCHv1:
 * https://lore.kernel.org/lkml/20210222171247.97609-1-sebastian.reichel@collabora.com/
 * drop patch 5 (applied)
 * instead of using 'protected-clocks' in RTC node, add fixed-clock
   node as suggested by Saravana Kannan
 * rebased to current master (68a32ba14177)

Thanks,

[0] There has been a discussion for the problem on the mailinglists
last year. The discussion died off, when I told people their ideas
don't work. I hope using protected-clocks is fine for this usecase.

https://lore.kernel.org/linux-clk/20191108170135.9053-1-sebastian.reichel@collabora.com/

[1] I've sent this before as a separate patch in September, but
nobody seemed to care. This adds full context for the problem.

https://lore.kernel.org/dri-devel/20200910162831.321556-1-sebastian.reichel@collabora.com/

-- Sebastian

Sebastian Reichel (5):
  rtc: m41t80: add support for fixed clock
  drm/imx: Add 8 pixel alignment fix
  dt-bindings: vendor-prefixes: add congatec
  dt-bindings: arm: fsl: add GE B1x5pv2 boards
  ARM: dts: imx6: Add GE B1x5v2

 .../devicetree/bindings/arm/fsl.yaml          |  11 +
 .../devicetree/bindings/rtc/rtc-m41t80.txt    |   9 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/Makefile                    |   5 +
 arch/arm/boot/dts/imx6dl-b105pv2.dts          |  35 +
 arch/arm/boot/dts/imx6dl-b105v2.dts           |  35 +
 arch/arm/boot/dts/imx6dl-b125pv2.dts          |  33 +
 arch/arm/boot/dts/imx6dl-b125v2.dts           |  33 +
 arch/arm/boot/dts/imx6dl-b155v2.dts           |  36 +
 arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi         | 434 ++++++++++++
 arch/arm/boot/dts/imx6dl-b1x5v2.dtsi          |  61 ++
 arch/arm/boot/dts/imx6dl-qmx6.dtsi            | 624 ++++++++++++++++++
 drivers/gpu/drm/imx/imx-drm-core.c            |  19 +-
 drivers/gpu/drm/imx/imx-ldb.c                 |   5 +
 drivers/gpu/drm/imx/ipuv3-crtc.c              |  11 +-
 drivers/gpu/drm/imx/ipuv3-plane.c             |  19 +-
 drivers/gpu/ipu-v3/ipu-dc.c                   |   5 +
 drivers/gpu/ipu-v3/ipu-di.c                   |   7 +
 drivers/rtc/rtc-m41t80.c                      |  12 +
 19 files changed, 1390 insertions(+), 6 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx6dl-b105pv2.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-b105v2.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-b125pv2.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-b125v2.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-b155v2.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
 create mode 100644 arch/arm/boot/dts/imx6dl-b1x5v2.dtsi
 create mode 100644 arch/arm/boot/dts/imx6dl-qmx6.dtsi

-- 
2.30.2


WARNING: multiple messages have this Message-ID
From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Sebastian Reichel <sebastian.reichel@collabora.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Alessandro Zummo <a.zummo@towertech.it>,
	David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Saravana Kannan <saravanak@google.com>,
	devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-rtc@vger.kernel.org,
	linux-mtd@lists.infradead.org, kernel@collabora.com
Subject: [PATCHv2 0/5] Support for GE B1x5v2 and B1x5Pv2
Date: Thu, 29 Apr 2021 00:29:48 +0200	[thread overview]
Message-ID: <20210428222953.235280-1-sebastian.reichel@collabora.com> (raw)

Hi,

This series adds support for another General Electric patient
monitor series (similar to existing Bx50v3), which is based on
i.MX6DL using Congatec's QMX6 module.

The module uses an I2C RTC to provide the i.MX6 32768 Hz clock,
so it's important to keep it enabled. Not doing so results in
incorrect timings of watchdog and i.MX6 RTC. The bootloader
enables the watchdog, so disabling the clock results in system
reboot. [0]

The second patch is required for B155v2, which uses a 1366x768
G156XTN01 panel. The 1366 width is not supported by the display
pipeline and result in boot hanging without the patch. [1]

Patches 3+4 are updating DT bindings for the new board compatible
values.

Patch 5 adds the board files.

Changes since PATCHv1:
 * https://lore.kernel.org/lkml/20210222171247.97609-1-sebastian.reichel@collabora.com/
 * drop patch 5 (applied)
 * instead of using 'protected-clocks' in RTC node, add fixed-clock
   node as suggested by Saravana Kannan
 * rebased to current master (68a32ba14177)

Thanks,

[0] There has been a discussion for the problem on the mailinglists
last year. The discussion died off, when I told people their ideas
don't work. I hope using protected-clocks is fine for this usecase.

https://lore.kernel.org/linux-clk/20191108170135.9053-1-sebastian.reichel@collabora.com/

[1] I've sent this before as a separate patch in September, but
nobody seemed to care. This adds full context for the problem.

https://lore.kernel.org/dri-devel/20200910162831.321556-1-sebastian.reichel@collabora.com/

-- Sebastian

Sebastian Reichel (5):
  rtc: m41t80: add support for fixed clock
  drm/imx: Add 8 pixel alignment fix
  dt-bindings: vendor-prefixes: add congatec
  dt-bindings: arm: fsl: add GE B1x5pv2 boards
  ARM: dts: imx6: Add GE B1x5v2

 .../devicetree/bindings/arm/fsl.yaml          |  11 +
 .../devicetree/bindings/rtc/rtc-m41t80.txt    |   9 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/Makefile                    |   5 +
 arch/arm/boot/dts/imx6dl-b105pv2.dts          |  35 +
 arch/arm/boot/dts/imx6dl-b105v2.dts           |  35 +
 arch/arm/boot/dts/imx6dl-b125pv2.dts          |  33 +
 arch/arm/boot/dts/imx6dl-b125v2.dts           |  33 +
 arch/arm/boot/dts/imx6dl-b155v2.dts           |  36 +
 arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi         | 434 ++++++++++++
 arch/arm/boot/dts/imx6dl-b1x5v2.dtsi          |  61 ++
 arch/arm/boot/dts/imx6dl-qmx6.dtsi            | 624 ++++++++++++++++++
 drivers/gpu/drm/imx/imx-drm-core.c            |  19 +-
 drivers/gpu/drm/imx/imx-ldb.c                 |   5 +
 drivers/gpu/drm/imx/ipuv3-crtc.c              |  11 +-
 drivers/gpu/drm/imx/ipuv3-plane.c             |  19 +-
 drivers/gpu/ipu-v3/ipu-dc.c                   |   5 +
 drivers/gpu/ipu-v3/ipu-di.c                   |   7 +
 drivers/rtc/rtc-m41t80.c                      |  12 +
 19 files changed, 1390 insertions(+), 6 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx6dl-b105pv2.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-b105v2.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-b125pv2.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-b125v2.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-b155v2.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
 create mode 100644 arch/arm/boot/dts/imx6dl-b1x5v2.dtsi
 create mode 100644 arch/arm/boot/dts/imx6dl-qmx6.dtsi

-- 
2.30.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

WARNING: multiple messages have this Message-ID
From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Sebastian Reichel <sebastian.reichel@collabora.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Alessandro Zummo <a.zummo@towertech.it>,
	David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Saravana Kannan <saravanak@google.com>,
	devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-rtc@vger.kernel.org,
	linux-mtd@lists.infradead.org, kernel@collabora.com
Subject: [PATCHv2 0/5] Support for GE B1x5v2 and B1x5Pv2
Date: Thu, 29 Apr 2021 00:29:48 +0200	[thread overview]
Message-ID: <20210428222953.235280-1-sebastian.reichel@collabora.com> (raw)

Hi,

This series adds support for another General Electric patient
monitor series (similar to existing Bx50v3), which is based on
i.MX6DL using Congatec's QMX6 module.

The module uses an I2C RTC to provide the i.MX6 32768 Hz clock,
so it's important to keep it enabled. Not doing so results in
incorrect timings of watchdog and i.MX6 RTC. The bootloader
enables the watchdog, so disabling the clock results in system
reboot. [0]

The second patch is required for B155v2, which uses a 1366x768
G156XTN01 panel. The 1366 width is not supported by the display
pipeline and result in boot hanging without the patch. [1]

Patches 3+4 are updating DT bindings for the new board compatible
values.

Patch 5 adds the board files.

Changes since PATCHv1:
 * https://lore.kernel.org/lkml/20210222171247.97609-1-sebastian.reichel@collabora.com/
 * drop patch 5 (applied)
 * instead of using 'protected-clocks' in RTC node, add fixed-clock
   node as suggested by Saravana Kannan
 * rebased to current master (68a32ba14177)

Thanks,

[0] There has been a discussion for the problem on the mailinglists
last year. The discussion died off, when I told people their ideas
don't work. I hope using protected-clocks is fine for this usecase.

https://lore.kernel.org/linux-clk/20191108170135.9053-1-sebastian.reichel@collabora.com/

[1] I've sent this before as a separate patch in September, but
nobody seemed to care. This adds full context for the problem.

https://lore.kernel.org/dri-devel/20200910162831.321556-1-sebastian.reichel@collabora.com/

-- Sebastian

Sebastian Reichel (5):
  rtc: m41t80: add support for fixed clock
  drm/imx: Add 8 pixel alignment fix
  dt-bindings: vendor-prefixes: add congatec
  dt-bindings: arm: fsl: add GE B1x5pv2 boards
  ARM: dts: imx6: Add GE B1x5v2

 .../devicetree/bindings/arm/fsl.yaml          |  11 +
 .../devicetree/bindings/rtc/rtc-m41t80.txt    |   9 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/Makefile                    |   5 +
 arch/arm/boot/dts/imx6dl-b105pv2.dts          |  35 +
 arch/arm/boot/dts/imx6dl-b105v2.dts           |  35 +
 arch/arm/boot/dts/imx6dl-b125pv2.dts          |  33 +
 arch/arm/boot/dts/imx6dl-b125v2.dts           |  33 +
 arch/arm/boot/dts/imx6dl-b155v2.dts           |  36 +
 arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi         | 434 ++++++++++++
 arch/arm/boot/dts/imx6dl-b1x5v2.dtsi          |  61 ++
 arch/arm/boot/dts/imx6dl-qmx6.dtsi            | 624 ++++++++++++++++++
 drivers/gpu/drm/imx/imx-drm-core.c            |  19 +-
 drivers/gpu/drm/imx/imx-ldb.c                 |   5 +
 drivers/gpu/drm/imx/ipuv3-crtc.c              |  11 +-
 drivers/gpu/drm/imx/ipuv3-plane.c             |  19 +-
 drivers/gpu/ipu-v3/ipu-dc.c                   |   5 +
 drivers/gpu/ipu-v3/ipu-di.c                   |   7 +
 drivers/rtc/rtc-m41t80.c                      |  12 +
 19 files changed, 1390 insertions(+), 6 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx6dl-b105pv2.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-b105v2.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-b125pv2.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-b125v2.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-b155v2.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
 create mode 100644 arch/arm/boot/dts/imx6dl-b1x5v2.dtsi
 create mode 100644 arch/arm/boot/dts/imx6dl-qmx6.dtsi

-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID
From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Sebastian Reichel <sebastian.reichel@collabora.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>
Cc: linux-rtc@vger.kernel.org,
	Alessandro Zummo <a.zummo@towertech.it>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Saravana Kannan <saravanak@google.com>,
	devicetree@vger.kernel.org, David Airlie <airlied@linux.ie>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	Rob Herring <robh+dt@kernel.org>,
	linux-mtd@lists.infradead.org,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	kernel@collabora.com, linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2 0/5] Support for GE B1x5v2 and B1x5Pv2
Date: Thu, 29 Apr 2021 00:29:48 +0200	[thread overview]
Message-ID: <20210428222953.235280-1-sebastian.reichel@collabora.com> (raw)

Hi,

This series adds support for another General Electric patient
monitor series (similar to existing Bx50v3), which is based on
i.MX6DL using Congatec's QMX6 module.

The module uses an I2C RTC to provide the i.MX6 32768 Hz clock,
so it's important to keep it enabled. Not doing so results in
incorrect timings of watchdog and i.MX6 RTC. The bootloader
enables the watchdog, so disabling the clock results in system
reboot. [0]

The second patch is required for B155v2, which uses a 1366x768
G156XTN01 panel. The 1366 width is not supported by the display
pipeline and result in boot hanging without the patch. [1]

Patches 3+4 are updating DT bindings for the new board compatible
values.

Patch 5 adds the board files.

Changes since PATCHv1:
 * https://lore.kernel.org/lkml/20210222171247.97609-1-sebastian.reichel@collabora.com/
 * drop patch 5 (applied)
 * instead of using 'protected-clocks' in RTC node, add fixed-clock
   node as suggested by Saravana Kannan
 * rebased to current master (68a32ba14177)

Thanks,

[0] There has been a discussion for the problem on the mailinglists
last year. The discussion died off, when I told people their ideas
don't work. I hope using protected-clocks is fine for this usecase.

https://lore.kernel.org/linux-clk/20191108170135.9053-1-sebastian.reichel@collabora.com/

[1] I've sent this before as a separate patch in September, but
nobody seemed to care. This adds full context for the problem.

https://lore.kernel.org/dri-devel/20200910162831.321556-1-sebastian.reichel@collabora.com/

-- Sebastian

Sebastian Reichel (5):
  rtc: m41t80: add support for fixed clock
  drm/imx: Add 8 pixel alignment fix
  dt-bindings: vendor-prefixes: add congatec
  dt-bindings: arm: fsl: add GE B1x5pv2 boards
  ARM: dts: imx6: Add GE B1x5v2

 .../devicetree/bindings/arm/fsl.yaml          |  11 +
 .../devicetree/bindings/rtc/rtc-m41t80.txt    |   9 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/Makefile                    |   5 +
 arch/arm/boot/dts/imx6dl-b105pv2.dts          |  35 +
 arch/arm/boot/dts/imx6dl-b105v2.dts           |  35 +
 arch/arm/boot/dts/imx6dl-b125pv2.dts          |  33 +
 arch/arm/boot/dts/imx6dl-b125v2.dts           |  33 +
 arch/arm/boot/dts/imx6dl-b155v2.dts           |  36 +
 arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi         | 434 ++++++++++++
 arch/arm/boot/dts/imx6dl-b1x5v2.dtsi          |  61 ++
 arch/arm/boot/dts/imx6dl-qmx6.dtsi            | 624 ++++++++++++++++++
 drivers/gpu/drm/imx/imx-drm-core.c            |  19 +-
 drivers/gpu/drm/imx/imx-ldb.c                 |   5 +
 drivers/gpu/drm/imx/ipuv3-crtc.c              |  11 +-
 drivers/gpu/drm/imx/ipuv3-plane.c             |  19 +-
 drivers/gpu/ipu-v3/ipu-dc.c                   |   5 +
 drivers/gpu/ipu-v3/ipu-di.c                   |   7 +
 drivers/rtc/rtc-m41t80.c                      |  12 +
 19 files changed, 1390 insertions(+), 6 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx6dl-b105pv2.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-b105v2.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-b125pv2.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-b125v2.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-b155v2.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
 create mode 100644 arch/arm/boot/dts/imx6dl-b1x5v2.dtsi
 create mode 100644 arch/arm/boot/dts/imx6dl-qmx6.dtsi

-- 
2.30.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

             reply	other threads:[~2021-04-28 22:30 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-28 22:29 Sebastian Reichel [this message]
2021-04-28 22:29 ` [PATCHv2 0/5] Support for GE B1x5v2 and B1x5Pv2 Sebastian Reichel
2021-04-28 22:29 ` Sebastian Reichel
2021-04-28 22:29 ` Sebastian Reichel
2021-04-28 22:29 ` [PATCHv2 1/5] rtc: m41t80: add support for fixed clock Sebastian Reichel
2021-04-28 22:29   ` Sebastian Reichel
2021-04-28 22:29   ` Sebastian Reichel
2021-04-28 22:29   ` Sebastian Reichel
2021-04-29  1:11   ` Saravana Kannan
2021-04-29  1:11     ` Saravana Kannan
2021-04-29  1:11     ` Saravana Kannan
2021-04-29  1:11     ` Saravana Kannan
2021-04-29  2:58   ` kernel test robot
2021-05-05 23:00   ` Rob Herring
2021-05-05 23:00     ` Rob Herring
2021-05-05 23:00     ` Rob Herring
2021-05-05 23:00     ` Rob Herring
2021-05-21 13:11   ` Sebastian Reichel
2021-04-28 22:29 ` [PATCHv2 2/5] drm/imx: Add 8 pixel alignment fix Sebastian Reichel
2021-04-28 22:29   ` Sebastian Reichel
2021-04-28 22:29   ` Sebastian Reichel
2021-04-28 22:29   ` Sebastian Reichel
2021-05-10 14:47   ` Philipp Zabel
2021-05-10 14:47     ` Philipp Zabel
2021-05-10 14:47     ` Philipp Zabel
2021-05-10 14:47     ` Philipp Zabel
2021-04-28 22:29 ` [PATCHv2 3/5] dt-bindings: vendor-prefixes: add congatec Sebastian Reichel
2021-04-28 22:29   ` Sebastian Reichel
2021-04-28 22:29   ` Sebastian Reichel
2021-04-28 22:29   ` Sebastian Reichel
2021-05-05 23:01   ` Rob Herring
2021-05-05 23:01     ` Rob Herring
2021-05-05 23:01     ` Rob Herring
2021-05-05 23:01     ` Rob Herring
2021-04-28 22:29 ` [PATCHv2 4/5] dt-bindings: arm: fsl: add GE B1x5pv2 boards Sebastian Reichel
2021-04-28 22:29   ` Sebastian Reichel
2021-04-28 22:29   ` Sebastian Reichel
2021-04-28 22:29   ` Sebastian Reichel
2021-05-05 23:02   ` Rob Herring
2021-05-05 23:02     ` Rob Herring
2021-05-05 23:02     ` Rob Herring
2021-05-05 23:02     ` Rob Herring
2021-04-28 22:29 ` [PATCHv2 5/5] ARM: dts: imx6: Add GE B1x5v2 Sebastian Reichel
2021-04-28 22:29   ` Sebastian Reichel
2021-04-28 22:29   ` Sebastian Reichel
2021-04-28 22:29   ` Sebastian Reichel
2021-05-22 14:04   ` Shawn Guo
2021-05-22 14:04     ` Shawn Guo
2021-05-22 14:04     ` Shawn Guo
2021-05-22 14:04     ` Shawn Guo
2021-05-24 22:29 ` (subset) [PATCHv2 0/5] Support for GE B1x5v2 and B1x5Pv2 Alexandre Belloni
2021-05-24 22:29   ` Alexandre Belloni
2021-05-24 22:29   ` Alexandre Belloni
2021-05-24 22:29   ` Alexandre Belloni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210428222953.235280-1-sebastian.reichel@collabora.com \
    --to=sebastian.reichel@collabora.com \
    --cc=a.zummo@towertech.it \
    --cc=airlied@linux.ie \
    --cc=alexandre.belloni@bootlin.com \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=festevam@gmail.com \
    --cc=kernel@collabora.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=saravanak@google.com \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.