All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v5 1/4] gpu: drm: separate panel orientation property creating and value setting
@ 2021-04-28 17:04 ` Hsin-Yi Wang
  0 siblings, 0 replies; 24+ messages in thread
From: Hsin-Yi Wang @ 2021-04-28 17:04 UTC (permalink / raw)
  To: dri-devel
  Cc: Chun-Kuang Hu, Sean Paul, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, David Airlie, Daniel Vetter, linux-kernel,
	Rob Herring, Matthias Brugger, devicetree, linux-arm-kernel,
	linux-mediatek

drm_dev_register() sets connector->registration_state to
DRM_CONNECTOR_REGISTERED and dev->registered to true. If
drm_connector_set_panel_orientation() is first called after
drm_dev_register(), it will fail several checks and results in following
warning.

Add a function to create panel orientation property and set default value
to UNKNOWN, so drivers can call this function to init the property earlier
, and let the panel set the real value later.

[    4.480976] ------------[ cut here ]------------
[    4.485603] WARNING: CPU: 5 PID: 369 at drivers/gpu/drm/drm_mode_object.c:45 __drm_mode_object_add+0xb4/0xbc
<snip>
[    4.609772] Call trace:
[    4.612208]  __drm_mode_object_add+0xb4/0xbc
[    4.616466]  drm_mode_object_add+0x20/0x2c
[    4.620552]  drm_property_create+0xdc/0x174
[    4.624723]  drm_property_create_enum+0x34/0x98
[    4.629241]  drm_connector_set_panel_orientation+0x64/0xa0
[    4.634716]  boe_panel_get_modes+0x88/0xd8
[    4.638802]  drm_panel_get_modes+0x2c/0x48
[    4.642887]  panel_bridge_get_modes+0x1c/0x28
[    4.647233]  drm_bridge_connector_get_modes+0xa0/0xd4
[    4.652273]  drm_helper_probe_single_connector_modes+0x218/0x700
[    4.658266]  drm_mode_getconnector+0x1b4/0x45c
[    4.662699]  drm_ioctl_kernel+0xac/0x128
[    4.666611]  drm_ioctl+0x268/0x410
[    4.670002]  drm_compat_ioctl+0xdc/0xf0
[    4.673829]  __arm64_compat_sys_ioctl+0xc8/0x100
[    4.678436]  el0_svc_common+0xf4/0x1c0
[    4.682174]  do_el0_svc_compat+0x28/0x3c
[    4.686088]  el0_svc_compat+0x10/0x1c
[    4.689738]  el0_sync_compat_handler+0xa8/0xcc
[    4.694171]  el0_sync_compat+0x178/0x180
[    4.698082] ---[ end trace b4f2db9d9c88610b ]---
[    4.702721] ------------[ cut here ]------------
[    4.707329] WARNING: CPU: 5 PID: 369 at drivers/gpu/drm/drm_mode_object.c:243 drm_object_attach_property+0x48/0xb8
<snip>
[    4.833830] Call trace:
[    4.836266]  drm_object_attach_property+0x48/0xb8
[    4.840958]  drm_connector_set_panel_orientation+0x84/0xa0
[    4.846432]  boe_panel_get_modes+0x88/0xd8
[    4.850516]  drm_panel_get_modes+0x2c/0x48
[    4.854600]  panel_bridge_get_modes+0x1c/0x28
[    4.858946]  drm_bridge_connector_get_modes+0xa0/0xd4
[    4.863984]  drm_helper_probe_single_connector_modes+0x218/0x700
[    4.869978]  drm_mode_getconnector+0x1b4/0x45c
[    4.874410]  drm_ioctl_kernel+0xac/0x128
[    4.878320]  drm_ioctl+0x268/0x410
[    4.881711]  drm_compat_ioctl+0xdc/0xf0
[    4.885536]  __arm64_compat_sys_ioctl+0xc8/0x100
[    4.890142]  el0_svc_common+0xf4/0x1c0
[    4.893879]  do_el0_svc_compat+0x28/0x3c
[    4.897791]  el0_svc_compat+0x10/0x1c
[    4.901441]  el0_sync_compat_handler+0xa8/0xcc
[    4.905873]  el0_sync_compat+0x178/0x180
[    4.909783] ---[ end trace b4f2db9d9c88610c ]---

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
v5:
don't create property in set_panel_orientation.

v4, v3:
create property in dsi driver and set value in panel.

v2:
create property in connector init
https://patchwork.kernel.org/project/linux-mediatek/patch/20210426051848.2600890-1-hsinyi@chromium.org/

v1:
set panel orientation in dsi driver
https://patchwork.kernel.org/project/linux-mediatek/patch/20210409045314.3420733-1-hsinyi@chromium.org/
---
 drivers/gpu/drm/drm_connector.c | 58 ++++++++++++++++++++++++---------
 include/drm/drm_connector.h     |  2 ++
 2 files changed, 44 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 7631f76e7f34..7189baaabf41 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1210,7 +1210,7 @@ static const struct drm_prop_enum_list dp_colorspaces[] = {
  *	INPUT_PROP_DIRECT) will still map 1:1 to the actual LCD panel
  *	coordinates, so if userspace rotates the picture to adjust for
  *	the orientation it must also apply the same transformation to the
- *	touchscreen input coordinates. This property is initialized by calling
+ *	touchscreen input coordinates. This property value is set by calling
  *	drm_connector_set_panel_orientation() or
  *	drm_connector_set_panel_orientation_with_quirk()
  *
@@ -2173,8 +2173,8 @@ EXPORT_SYMBOL(drm_connector_set_vrr_capable_property);
  * @connector: connector for which to set the panel-orientation property.
  * @panel_orientation: drm_panel_orientation value to set
  *
- * This function sets the connector's panel_orientation and attaches
- * a "panel orientation" property to the connector.
+ * This function sets the connector's panel_orientation value. If the property
+ * doesn't exist, it will return an error.
  *
  * Calling this function on a connector where the panel_orientation has
  * already been set is a no-op (e.g. the orientation has been overridden with
@@ -2205,19 +2205,11 @@ int drm_connector_set_panel_orientation(
 	info->panel_orientation = panel_orientation;
 
 	prop = dev->mode_config.panel_orientation_property;
-	if (!prop) {
-		prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
-				"panel orientation",
-				drm_panel_orientation_enum_list,
-				ARRAY_SIZE(drm_panel_orientation_enum_list));
-		if (!prop)
-			return -ENOMEM;
-
-		dev->mode_config.panel_orientation_property = prop;
-	}
+	if (WARN_ON(!prop))
+		return -EINVAL;
 
-	drm_object_attach_property(&connector->base, prop,
-				   info->panel_orientation);
+	drm_object_property_set_value(&connector->base, prop,
+				      info->panel_orientation);
 	return 0;
 }
 EXPORT_SYMBOL(drm_connector_set_panel_orientation);
@@ -2225,7 +2217,7 @@ EXPORT_SYMBOL(drm_connector_set_panel_orientation);
 /**
  * drm_connector_set_panel_orientation_with_quirk -
  *	set the connector's panel_orientation after checking for quirks
- * @connector: connector for which to init the panel-orientation property.
+ * @connector: connector for which to set the panel-orientation property.
  * @panel_orientation: drm_panel_orientation value to set
  * @width: width in pixels of the panel, used for panel quirk detection
  * @height: height in pixels of the panel, used for panel quirk detection
@@ -2252,6 +2244,40 @@ int drm_connector_set_panel_orientation_with_quirk(
 }
 EXPORT_SYMBOL(drm_connector_set_panel_orientation_with_quirk);
 
+/**
+ * drm_connector_init_panel_orientation_property -
+ * 	create the connector's panel orientation property
+ *
+ * This function attaches a "panel orientation" property to the connector
+ * and initializes its value to DRM_MODE_PANEL_ORIENTATION_UNKNOWN.
+ *
+ * The value of the property can be set by drm_connector_set_panel_orientation()
+ * or drm_connector_set_panel_orientation_with_quirk() later.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_init_panel_orientation_property(
+	struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_property *prop;
+
+	prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
+			"panel orientation",
+			drm_panel_orientation_enum_list,
+			ARRAY_SIZE(drm_panel_orientation_enum_list));
+	if (!prop)
+		return -ENOMEM;
+
+	dev->mode_config.panel_orientation_property = prop;
+	drm_object_attach_property(&connector->base, prop,
+				   DRM_MODE_PANEL_ORIENTATION_UNKNOWN);
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
+
 int drm_connector_set_obj_prop(struct drm_mode_object *obj,
 				    struct drm_property *property,
 				    uint64_t value)
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 1922b278ffad..4396c1c4a5db 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1696,6 +1696,8 @@ int drm_connector_set_panel_orientation_with_quirk(
 	struct drm_connector *connector,
 	enum drm_panel_orientation panel_orientation,
 	int width, int height);
+int drm_connector_init_panel_orientation_property(
+	struct drm_connector *connector);
 int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
 					  int min, int max);
 
-- 
2.31.1.498.g6c1eba8ee3d-goog


^ permalink raw reply related	[flat|nested] 24+ messages in thread
* [PATCH v5 1/4] gpu: drm: separate panel orientation property creating and value setting
@ 2021-04-28 17:04 ` Hsin-Yi Wang
  0 siblings, 0 replies; 24+ messages in thread
From: Hsin-Yi Wang @ 2021-04-28 17:04 UTC (permalink / raw)
  To: dri-devel
  Cc: Chun-Kuang Hu, Sean Paul, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, David Airlie, Daniel Vetter, linux-kernel,
	Rob Herring, Matthias Brugger, devicetree, linux-arm-kernel,
	linux-mediatek

drm_dev_register() sets connector->registration_state to
DRM_CONNECTOR_REGISTERED and dev->registered to true. If
drm_connector_set_panel_orientation() is first called after
drm_dev_register(), it will fail several checks and results in following
warning.

Add a function to create panel orientation property and set default value
to UNKNOWN, so drivers can call this function to init the property earlier
, and let the panel set the real value later.

[    4.480976] ------------[ cut here ]------------
[    4.485603] WARNING: CPU: 5 PID: 369 at drivers/gpu/drm/drm_mode_object.c:45 __drm_mode_object_add+0xb4/0xbc
<snip>
[    4.609772] Call trace:
[    4.612208]  __drm_mode_object_add+0xb4/0xbc
[    4.616466]  drm_mode_object_add+0x20/0x2c
[    4.620552]  drm_property_create+0xdc/0x174
[    4.624723]  drm_property_create_enum+0x34/0x98
[    4.629241]  drm_connector_set_panel_orientation+0x64/0xa0
[    4.634716]  boe_panel_get_modes+0x88/0xd8
[    4.638802]  drm_panel_get_modes+0x2c/0x48
[    4.642887]  panel_bridge_get_modes+0x1c/0x28
[    4.647233]  drm_bridge_connector_get_modes+0xa0/0xd4
[    4.652273]  drm_helper_probe_single_connector_modes+0x218/0x700
[    4.658266]  drm_mode_getconnector+0x1b4/0x45c
[    4.662699]  drm_ioctl_kernel+0xac/0x128
[    4.666611]  drm_ioctl+0x268/0x410
[    4.670002]  drm_compat_ioctl+0xdc/0xf0
[    4.673829]  __arm64_compat_sys_ioctl+0xc8/0x100
[    4.678436]  el0_svc_common+0xf4/0x1c0
[    4.682174]  do_el0_svc_compat+0x28/0x3c
[    4.686088]  el0_svc_compat+0x10/0x1c
[    4.689738]  el0_sync_compat_handler+0xa8/0xcc
[    4.694171]  el0_sync_compat+0x178/0x180
[    4.698082] ---[ end trace b4f2db9d9c88610b ]---
[    4.702721] ------------[ cut here ]------------
[    4.707329] WARNING: CPU: 5 PID: 369 at drivers/gpu/drm/drm_mode_object.c:243 drm_object_attach_property+0x48/0xb8
<snip>
[    4.833830] Call trace:
[    4.836266]  drm_object_attach_property+0x48/0xb8
[    4.840958]  drm_connector_set_panel_orientation+0x84/0xa0
[    4.846432]  boe_panel_get_modes+0x88/0xd8
[    4.850516]  drm_panel_get_modes+0x2c/0x48
[    4.854600]  panel_bridge_get_modes+0x1c/0x28
[    4.858946]  drm_bridge_connector_get_modes+0xa0/0xd4
[    4.863984]  drm_helper_probe_single_connector_modes+0x218/0x700
[    4.869978]  drm_mode_getconnector+0x1b4/0x45c
[    4.874410]  drm_ioctl_kernel+0xac/0x128
[    4.878320]  drm_ioctl+0x268/0x410
[    4.881711]  drm_compat_ioctl+0xdc/0xf0
[    4.885536]  __arm64_compat_sys_ioctl+0xc8/0x100
[    4.890142]  el0_svc_common+0xf4/0x1c0
[    4.893879]  do_el0_svc_compat+0x28/0x3c
[    4.897791]  el0_svc_compat+0x10/0x1c
[    4.901441]  el0_sync_compat_handler+0xa8/0xcc
[    4.905873]  el0_sync_compat+0x178/0x180
[    4.909783] ---[ end trace b4f2db9d9c88610c ]---

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
v5:
don't create property in set_panel_orientation.

v4, v3:
create property in dsi driver and set value in panel.

v2:
create property in connector init
https://patchwork.kernel.org/project/linux-mediatek/patch/20210426051848.2600890-1-hsinyi@chromium.org/

v1:
set panel orientation in dsi driver
https://patchwork.kernel.org/project/linux-mediatek/patch/20210409045314.3420733-1-hsinyi@chromium.org/
---
 drivers/gpu/drm/drm_connector.c | 58 ++++++++++++++++++++++++---------
 include/drm/drm_connector.h     |  2 ++
 2 files changed, 44 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 7631f76e7f34..7189baaabf41 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1210,7 +1210,7 @@ static const struct drm_prop_enum_list dp_colorspaces[] = {
  *	INPUT_PROP_DIRECT) will still map 1:1 to the actual LCD panel
  *	coordinates, so if userspace rotates the picture to adjust for
  *	the orientation it must also apply the same transformation to the
- *	touchscreen input coordinates. This property is initialized by calling
+ *	touchscreen input coordinates. This property value is set by calling
  *	drm_connector_set_panel_orientation() or
  *	drm_connector_set_panel_orientation_with_quirk()
  *
@@ -2173,8 +2173,8 @@ EXPORT_SYMBOL(drm_connector_set_vrr_capable_property);
  * @connector: connector for which to set the panel-orientation property.
  * @panel_orientation: drm_panel_orientation value to set
  *
- * This function sets the connector's panel_orientation and attaches
- * a "panel orientation" property to the connector.
+ * This function sets the connector's panel_orientation value. If the property
+ * doesn't exist, it will return an error.
  *
  * Calling this function on a connector where the panel_orientation has
  * already been set is a no-op (e.g. the orientation has been overridden with
@@ -2205,19 +2205,11 @@ int drm_connector_set_panel_orientation(
 	info->panel_orientation = panel_orientation;
 
 	prop = dev->mode_config.panel_orientation_property;
-	if (!prop) {
-		prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
-				"panel orientation",
-				drm_panel_orientation_enum_list,
-				ARRAY_SIZE(drm_panel_orientation_enum_list));
-		if (!prop)
-			return -ENOMEM;
-
-		dev->mode_config.panel_orientation_property = prop;
-	}
+	if (WARN_ON(!prop))
+		return -EINVAL;
 
-	drm_object_attach_property(&connector->base, prop,
-				   info->panel_orientation);
+	drm_object_property_set_value(&connector->base, prop,
+				      info->panel_orientation);
 	return 0;
 }
 EXPORT_SYMBOL(drm_connector_set_panel_orientation);
@@ -2225,7 +2217,7 @@ EXPORT_SYMBOL(drm_connector_set_panel_orientation);
 /**
  * drm_connector_set_panel_orientation_with_quirk -
  *	set the connector's panel_orientation after checking for quirks
- * @connector: connector for which to init the panel-orientation property.
+ * @connector: connector for which to set the panel-orientation property.
  * @panel_orientation: drm_panel_orientation value to set
  * @width: width in pixels of the panel, used for panel quirk detection
  * @height: height in pixels of the panel, used for panel quirk detection
@@ -2252,6 +2244,40 @@ int drm_connector_set_panel_orientation_with_quirk(
 }
 EXPORT_SYMBOL(drm_connector_set_panel_orientation_with_quirk);
 
+/**
+ * drm_connector_init_panel_orientation_property -
+ * 	create the connector's panel orientation property
+ *
+ * This function attaches a "panel orientation" property to the connector
+ * and initializes its value to DRM_MODE_PANEL_ORIENTATION_UNKNOWN.
+ *
+ * The value of the property can be set by drm_connector_set_panel_orientation()
+ * or drm_connector_set_panel_orientation_with_quirk() later.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_init_panel_orientation_property(
+	struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_property *prop;
+
+	prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
+			"panel orientation",
+			drm_panel_orientation_enum_list,
+			ARRAY_SIZE(drm_panel_orientation_enum_list));
+	if (!prop)
+		return -ENOMEM;
+
+	dev->mode_config.panel_orientation_property = prop;
+	drm_object_attach_property(&connector->base, prop,
+				   DRM_MODE_PANEL_ORIENTATION_UNKNOWN);
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
+
 int drm_connector_set_obj_prop(struct drm_mode_object *obj,
 				    struct drm_property *property,
 				    uint64_t value)
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 1922b278ffad..4396c1c4a5db 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1696,6 +1696,8 @@ int drm_connector_set_panel_orientation_with_quirk(
 	struct drm_connector *connector,
 	enum drm_panel_orientation panel_orientation,
 	int width, int height);
+int drm_connector_init_panel_orientation_property(
+	struct drm_connector *connector);
 int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
 					  int min, int max);
 
-- 
2.31.1.498.g6c1eba8ee3d-goog


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 24+ messages in thread
* [PATCH v5 1/4] gpu: drm: separate panel orientation property creating and value setting
@ 2021-04-28 17:04 ` Hsin-Yi Wang
  0 siblings, 0 replies; 24+ messages in thread
From: Hsin-Yi Wang @ 2021-04-28 17:04 UTC (permalink / raw)
  To: dri-devel
  Cc: Chun-Kuang Hu, Sean Paul, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, David Airlie, Daniel Vetter, linux-kernel,
	Rob Herring, Matthias Brugger, devicetree, linux-arm-kernel,
	linux-mediatek

drm_dev_register() sets connector->registration_state to
DRM_CONNECTOR_REGISTERED and dev->registered to true. If
drm_connector_set_panel_orientation() is first called after
drm_dev_register(), it will fail several checks and results in following
warning.

Add a function to create panel orientation property and set default value
to UNKNOWN, so drivers can call this function to init the property earlier
, and let the panel set the real value later.

[    4.480976] ------------[ cut here ]------------
[    4.485603] WARNING: CPU: 5 PID: 369 at drivers/gpu/drm/drm_mode_object.c:45 __drm_mode_object_add+0xb4/0xbc
<snip>
[    4.609772] Call trace:
[    4.612208]  __drm_mode_object_add+0xb4/0xbc
[    4.616466]  drm_mode_object_add+0x20/0x2c
[    4.620552]  drm_property_create+0xdc/0x174
[    4.624723]  drm_property_create_enum+0x34/0x98
[    4.629241]  drm_connector_set_panel_orientation+0x64/0xa0
[    4.634716]  boe_panel_get_modes+0x88/0xd8
[    4.638802]  drm_panel_get_modes+0x2c/0x48
[    4.642887]  panel_bridge_get_modes+0x1c/0x28
[    4.647233]  drm_bridge_connector_get_modes+0xa0/0xd4
[    4.652273]  drm_helper_probe_single_connector_modes+0x218/0x700
[    4.658266]  drm_mode_getconnector+0x1b4/0x45c
[    4.662699]  drm_ioctl_kernel+0xac/0x128
[    4.666611]  drm_ioctl+0x268/0x410
[    4.670002]  drm_compat_ioctl+0xdc/0xf0
[    4.673829]  __arm64_compat_sys_ioctl+0xc8/0x100
[    4.678436]  el0_svc_common+0xf4/0x1c0
[    4.682174]  do_el0_svc_compat+0x28/0x3c
[    4.686088]  el0_svc_compat+0x10/0x1c
[    4.689738]  el0_sync_compat_handler+0xa8/0xcc
[    4.694171]  el0_sync_compat+0x178/0x180
[    4.698082] ---[ end trace b4f2db9d9c88610b ]---
[    4.702721] ------------[ cut here ]------------
[    4.707329] WARNING: CPU: 5 PID: 369 at drivers/gpu/drm/drm_mode_object.c:243 drm_object_attach_property+0x48/0xb8
<snip>
[    4.833830] Call trace:
[    4.836266]  drm_object_attach_property+0x48/0xb8
[    4.840958]  drm_connector_set_panel_orientation+0x84/0xa0
[    4.846432]  boe_panel_get_modes+0x88/0xd8
[    4.850516]  drm_panel_get_modes+0x2c/0x48
[    4.854600]  panel_bridge_get_modes+0x1c/0x28
[    4.858946]  drm_bridge_connector_get_modes+0xa0/0xd4
[    4.863984]  drm_helper_probe_single_connector_modes+0x218/0x700
[    4.869978]  drm_mode_getconnector+0x1b4/0x45c
[    4.874410]  drm_ioctl_kernel+0xac/0x128
[    4.878320]  drm_ioctl+0x268/0x410
[    4.881711]  drm_compat_ioctl+0xdc/0xf0
[    4.885536]  __arm64_compat_sys_ioctl+0xc8/0x100
[    4.890142]  el0_svc_common+0xf4/0x1c0
[    4.893879]  do_el0_svc_compat+0x28/0x3c
[    4.897791]  el0_svc_compat+0x10/0x1c
[    4.901441]  el0_sync_compat_handler+0xa8/0xcc
[    4.905873]  el0_sync_compat+0x178/0x180
[    4.909783] ---[ end trace b4f2db9d9c88610c ]---

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
v5:
don't create property in set_panel_orientation.

v4, v3:
create property in dsi driver and set value in panel.

v2:
create property in connector init
https://patchwork.kernel.org/project/linux-mediatek/patch/20210426051848.2600890-1-hsinyi@chromium.org/

v1:
set panel orientation in dsi driver
https://patchwork.kernel.org/project/linux-mediatek/patch/20210409045314.3420733-1-hsinyi@chromium.org/
---
 drivers/gpu/drm/drm_connector.c | 58 ++++++++++++++++++++++++---------
 include/drm/drm_connector.h     |  2 ++
 2 files changed, 44 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 7631f76e7f34..7189baaabf41 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1210,7 +1210,7 @@ static const struct drm_prop_enum_list dp_colorspaces[] = {
  *	INPUT_PROP_DIRECT) will still map 1:1 to the actual LCD panel
  *	coordinates, so if userspace rotates the picture to adjust for
  *	the orientation it must also apply the same transformation to the
- *	touchscreen input coordinates. This property is initialized by calling
+ *	touchscreen input coordinates. This property value is set by calling
  *	drm_connector_set_panel_orientation() or
  *	drm_connector_set_panel_orientation_with_quirk()
  *
@@ -2173,8 +2173,8 @@ EXPORT_SYMBOL(drm_connector_set_vrr_capable_property);
  * @connector: connector for which to set the panel-orientation property.
  * @panel_orientation: drm_panel_orientation value to set
  *
- * This function sets the connector's panel_orientation and attaches
- * a "panel orientation" property to the connector.
+ * This function sets the connector's panel_orientation value. If the property
+ * doesn't exist, it will return an error.
  *
  * Calling this function on a connector where the panel_orientation has
  * already been set is a no-op (e.g. the orientation has been overridden with
@@ -2205,19 +2205,11 @@ int drm_connector_set_panel_orientation(
 	info->panel_orientation = panel_orientation;
 
 	prop = dev->mode_config.panel_orientation_property;
-	if (!prop) {
-		prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
-				"panel orientation",
-				drm_panel_orientation_enum_list,
-				ARRAY_SIZE(drm_panel_orientation_enum_list));
-		if (!prop)
-			return -ENOMEM;
-
-		dev->mode_config.panel_orientation_property = prop;
-	}
+	if (WARN_ON(!prop))
+		return -EINVAL;
 
-	drm_object_attach_property(&connector->base, prop,
-				   info->panel_orientation);
+	drm_object_property_set_value(&connector->base, prop,
+				      info->panel_orientation);
 	return 0;
 }
 EXPORT_SYMBOL(drm_connector_set_panel_orientation);
@@ -2225,7 +2217,7 @@ EXPORT_SYMBOL(drm_connector_set_panel_orientation);
 /**
  * drm_connector_set_panel_orientation_with_quirk -
  *	set the connector's panel_orientation after checking for quirks
- * @connector: connector for which to init the panel-orientation property.
+ * @connector: connector for which to set the panel-orientation property.
  * @panel_orientation: drm_panel_orientation value to set
  * @width: width in pixels of the panel, used for panel quirk detection
  * @height: height in pixels of the panel, used for panel quirk detection
@@ -2252,6 +2244,40 @@ int drm_connector_set_panel_orientation_with_quirk(
 }
 EXPORT_SYMBOL(drm_connector_set_panel_orientation_with_quirk);
 
+/**
+ * drm_connector_init_panel_orientation_property -
+ * 	create the connector's panel orientation property
+ *
+ * This function attaches a "panel orientation" property to the connector
+ * and initializes its value to DRM_MODE_PANEL_ORIENTATION_UNKNOWN.
+ *
+ * The value of the property can be set by drm_connector_set_panel_orientation()
+ * or drm_connector_set_panel_orientation_with_quirk() later.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_init_panel_orientation_property(
+	struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_property *prop;
+
+	prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
+			"panel orientation",
+			drm_panel_orientation_enum_list,
+			ARRAY_SIZE(drm_panel_orientation_enum_list));
+	if (!prop)
+		return -ENOMEM;
+
+	dev->mode_config.panel_orientation_property = prop;
+	drm_object_attach_property(&connector->base, prop,
+				   DRM_MODE_PANEL_ORIENTATION_UNKNOWN);
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
+
 int drm_connector_set_obj_prop(struct drm_mode_object *obj,
 				    struct drm_property *property,
 				    uint64_t value)
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 1922b278ffad..4396c1c4a5db 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1696,6 +1696,8 @@ int drm_connector_set_panel_orientation_with_quirk(
 	struct drm_connector *connector,
 	enum drm_panel_orientation panel_orientation,
 	int width, int height);
+int drm_connector_init_panel_orientation_property(
+	struct drm_connector *connector);
 int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
 					  int min, int max);
 
-- 
2.31.1.498.g6c1eba8ee3d-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 24+ messages in thread
* [PATCH v5 1/4] gpu: drm: separate panel orientation property creating and value setting
@ 2021-04-28 17:04 ` Hsin-Yi Wang
  0 siblings, 0 replies; 24+ messages in thread
From: Hsin-Yi Wang @ 2021-04-28 17:04 UTC (permalink / raw)
  To: dri-devel
  Cc: Chun-Kuang Hu, devicetree, David Airlie, linux-kernel,
	Rob Herring, linux-mediatek, Thomas Zimmermann, Matthias Brugger,
	Sean Paul, linux-arm-kernel

drm_dev_register() sets connector->registration_state to
DRM_CONNECTOR_REGISTERED and dev->registered to true. If
drm_connector_set_panel_orientation() is first called after
drm_dev_register(), it will fail several checks and results in following
warning.

Add a function to create panel orientation property and set default value
to UNKNOWN, so drivers can call this function to init the property earlier
, and let the panel set the real value later.

[    4.480976] ------------[ cut here ]------------
[    4.485603] WARNING: CPU: 5 PID: 369 at drivers/gpu/drm/drm_mode_object.c:45 __drm_mode_object_add+0xb4/0xbc
<snip>
[    4.609772] Call trace:
[    4.612208]  __drm_mode_object_add+0xb4/0xbc
[    4.616466]  drm_mode_object_add+0x20/0x2c
[    4.620552]  drm_property_create+0xdc/0x174
[    4.624723]  drm_property_create_enum+0x34/0x98
[    4.629241]  drm_connector_set_panel_orientation+0x64/0xa0
[    4.634716]  boe_panel_get_modes+0x88/0xd8
[    4.638802]  drm_panel_get_modes+0x2c/0x48
[    4.642887]  panel_bridge_get_modes+0x1c/0x28
[    4.647233]  drm_bridge_connector_get_modes+0xa0/0xd4
[    4.652273]  drm_helper_probe_single_connector_modes+0x218/0x700
[    4.658266]  drm_mode_getconnector+0x1b4/0x45c
[    4.662699]  drm_ioctl_kernel+0xac/0x128
[    4.666611]  drm_ioctl+0x268/0x410
[    4.670002]  drm_compat_ioctl+0xdc/0xf0
[    4.673829]  __arm64_compat_sys_ioctl+0xc8/0x100
[    4.678436]  el0_svc_common+0xf4/0x1c0
[    4.682174]  do_el0_svc_compat+0x28/0x3c
[    4.686088]  el0_svc_compat+0x10/0x1c
[    4.689738]  el0_sync_compat_handler+0xa8/0xcc
[    4.694171]  el0_sync_compat+0x178/0x180
[    4.698082] ---[ end trace b4f2db9d9c88610b ]---
[    4.702721] ------------[ cut here ]------------
[    4.707329] WARNING: CPU: 5 PID: 369 at drivers/gpu/drm/drm_mode_object.c:243 drm_object_attach_property+0x48/0xb8
<snip>
[    4.833830] Call trace:
[    4.836266]  drm_object_attach_property+0x48/0xb8
[    4.840958]  drm_connector_set_panel_orientation+0x84/0xa0
[    4.846432]  boe_panel_get_modes+0x88/0xd8
[    4.850516]  drm_panel_get_modes+0x2c/0x48
[    4.854600]  panel_bridge_get_modes+0x1c/0x28
[    4.858946]  drm_bridge_connector_get_modes+0xa0/0xd4
[    4.863984]  drm_helper_probe_single_connector_modes+0x218/0x700
[    4.869978]  drm_mode_getconnector+0x1b4/0x45c
[    4.874410]  drm_ioctl_kernel+0xac/0x128
[    4.878320]  drm_ioctl+0x268/0x410
[    4.881711]  drm_compat_ioctl+0xdc/0xf0
[    4.885536]  __arm64_compat_sys_ioctl+0xc8/0x100
[    4.890142]  el0_svc_common+0xf4/0x1c0
[    4.893879]  do_el0_svc_compat+0x28/0x3c
[    4.897791]  el0_svc_compat+0x10/0x1c
[    4.901441]  el0_sync_compat_handler+0xa8/0xcc
[    4.905873]  el0_sync_compat+0x178/0x180
[    4.909783] ---[ end trace b4f2db9d9c88610c ]---

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
v5:
don't create property in set_panel_orientation.

v4, v3:
create property in dsi driver and set value in panel.

v2:
create property in connector init
https://patchwork.kernel.org/project/linux-mediatek/patch/20210426051848.2600890-1-hsinyi@chromium.org/

v1:
set panel orientation in dsi driver
https://patchwork.kernel.org/project/linux-mediatek/patch/20210409045314.3420733-1-hsinyi@chromium.org/
---
 drivers/gpu/drm/drm_connector.c | 58 ++++++++++++++++++++++++---------
 include/drm/drm_connector.h     |  2 ++
 2 files changed, 44 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 7631f76e7f34..7189baaabf41 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1210,7 +1210,7 @@ static const struct drm_prop_enum_list dp_colorspaces[] = {
  *	INPUT_PROP_DIRECT) will still map 1:1 to the actual LCD panel
  *	coordinates, so if userspace rotates the picture to adjust for
  *	the orientation it must also apply the same transformation to the
- *	touchscreen input coordinates. This property is initialized by calling
+ *	touchscreen input coordinates. This property value is set by calling
  *	drm_connector_set_panel_orientation() or
  *	drm_connector_set_panel_orientation_with_quirk()
  *
@@ -2173,8 +2173,8 @@ EXPORT_SYMBOL(drm_connector_set_vrr_capable_property);
  * @connector: connector for which to set the panel-orientation property.
  * @panel_orientation: drm_panel_orientation value to set
  *
- * This function sets the connector's panel_orientation and attaches
- * a "panel orientation" property to the connector.
+ * This function sets the connector's panel_orientation value. If the property
+ * doesn't exist, it will return an error.
  *
  * Calling this function on a connector where the panel_orientation has
  * already been set is a no-op (e.g. the orientation has been overridden with
@@ -2205,19 +2205,11 @@ int drm_connector_set_panel_orientation(
 	info->panel_orientation = panel_orientation;
 
 	prop = dev->mode_config.panel_orientation_property;
-	if (!prop) {
-		prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
-				"panel orientation",
-				drm_panel_orientation_enum_list,
-				ARRAY_SIZE(drm_panel_orientation_enum_list));
-		if (!prop)
-			return -ENOMEM;
-
-		dev->mode_config.panel_orientation_property = prop;
-	}
+	if (WARN_ON(!prop))
+		return -EINVAL;
 
-	drm_object_attach_property(&connector->base, prop,
-				   info->panel_orientation);
+	drm_object_property_set_value(&connector->base, prop,
+				      info->panel_orientation);
 	return 0;
 }
 EXPORT_SYMBOL(drm_connector_set_panel_orientation);
@@ -2225,7 +2217,7 @@ EXPORT_SYMBOL(drm_connector_set_panel_orientation);
 /**
  * drm_connector_set_panel_orientation_with_quirk -
  *	set the connector's panel_orientation after checking for quirks
- * @connector: connector for which to init the panel-orientation property.
+ * @connector: connector for which to set the panel-orientation property.
  * @panel_orientation: drm_panel_orientation value to set
  * @width: width in pixels of the panel, used for panel quirk detection
  * @height: height in pixels of the panel, used for panel quirk detection
@@ -2252,6 +2244,40 @@ int drm_connector_set_panel_orientation_with_quirk(
 }
 EXPORT_SYMBOL(drm_connector_set_panel_orientation_with_quirk);
 
+/**
+ * drm_connector_init_panel_orientation_property -
+ * 	create the connector's panel orientation property
+ *
+ * This function attaches a "panel orientation" property to the connector
+ * and initializes its value to DRM_MODE_PANEL_ORIENTATION_UNKNOWN.
+ *
+ * The value of the property can be set by drm_connector_set_panel_orientation()
+ * or drm_connector_set_panel_orientation_with_quirk() later.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_init_panel_orientation_property(
+	struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_property *prop;
+
+	prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
+			"panel orientation",
+			drm_panel_orientation_enum_list,
+			ARRAY_SIZE(drm_panel_orientation_enum_list));
+	if (!prop)
+		return -ENOMEM;
+
+	dev->mode_config.panel_orientation_property = prop;
+	drm_object_attach_property(&connector->base, prop,
+				   DRM_MODE_PANEL_ORIENTATION_UNKNOWN);
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
+
 int drm_connector_set_obj_prop(struct drm_mode_object *obj,
 				    struct drm_property *property,
 				    uint64_t value)
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 1922b278ffad..4396c1c4a5db 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1696,6 +1696,8 @@ int drm_connector_set_panel_orientation_with_quirk(
 	struct drm_connector *connector,
 	enum drm_panel_orientation panel_orientation,
 	int width, int height);
+int drm_connector_init_panel_orientation_property(
+	struct drm_connector *connector);
 int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
 					  int min, int max);
 
-- 
2.31.1.498.g6c1eba8ee3d-goog

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply related	[flat|nested] 24+ messages in thread
* [PATCH v5 2/4] drm/mediatek: init panel orientation property
  2021-04-28 17:04 ` Hsin-Yi Wang
  (?)
  (?)
@ 2021-04-28 17:04   ` Hsin-Yi Wang
  -1 siblings, 0 replies; 24+ messages in thread
From: Hsin-Yi Wang @ 2021-04-28 17:04 UTC (permalink / raw)
  To: dri-devel
  Cc: Chun-Kuang Hu, Sean Paul, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, David Airlie, Daniel Vetter, linux-kernel,
	Rob Herring, Matthias Brugger, devicetree, linux-arm-kernel,
	linux-mediatek

Init panel orientation property after connector is initialized. Let the
panel driver decides the orientation value later.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_dsi.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index ae403c67cbd9..9da1fd649131 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -964,6 +964,13 @@ static int mtk_dsi_encoder_init(struct drm_device *drm, struct mtk_dsi *dsi)
 		ret = PTR_ERR(dsi->connector);
 		goto err_cleanup_encoder;
 	}
+
+	ret = drm_connector_init_panel_orientation_property(dsi->connector);
+	if (ret) {
+		DRM_ERROR("Unable to init panel orientation\n");
+		goto err_cleanup_encoder;
+	}
+
 	drm_connector_attach_encoder(dsi->connector, &dsi->encoder);
 
 	return 0;
-- 
2.31.1.498.g6c1eba8ee3d-goog


^ permalink raw reply related	[flat|nested] 24+ messages in thread
* [PATCH v5 2/4] drm/mediatek: init panel orientation property
@ 2021-04-28 17:04   ` Hsin-Yi Wang
  0 siblings, 0 replies; 24+ messages in thread
From: Hsin-Yi Wang @ 2021-04-28 17:04 UTC (permalink / raw)
  To: dri-devel
  Cc: Chun-Kuang Hu, Sean Paul, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, David Airlie, Daniel Vetter, linux-kernel,
	Rob Herring, Matthias Brugger, devicetree, linux-arm-kernel,
	linux-mediatek

Init panel orientation property after connector is initialized. Let the
panel driver decides the orientation value later.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_dsi.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index ae403c67cbd9..9da1fd649131 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -964,6 +964,13 @@ static int mtk_dsi_encoder_init(struct drm_device *drm, struct mtk_dsi *dsi)
 		ret = PTR_ERR(dsi->connector);
 		goto err_cleanup_encoder;
 	}
+
+	ret = drm_connector_init_panel_orientation_property(dsi->connector);
+	if (ret) {
+		DRM_ERROR("Unable to init panel orientation\n");
+		goto err_cleanup_encoder;
+	}
+
 	drm_connector_attach_encoder(dsi->connector, &dsi->encoder);
 
 	return 0;
-- 
2.31.1.498.g6c1eba8ee3d-goog


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 24+ messages in thread
* [PATCH v5 2/4] drm/mediatek: init panel orientation property
@ 2021-04-28 17:04   ` Hsin-Yi Wang
  0 siblings, 0 replies; 24+ messages in thread
From: Hsin-Yi Wang @ 2021-04-28 17:04 UTC (permalink / raw)
  To: dri-devel
  Cc: Chun-Kuang Hu, Sean Paul, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, David Airlie, Daniel Vetter, linux-kernel,
	Rob Herring, Matthias Brugger, devicetree, linux-arm-kernel,
	linux-mediatek

Init panel orientation property after connector is initialized. Let the
panel driver decides the orientation value later.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_dsi.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index ae403c67cbd9..9da1fd649131 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -964,6 +964,13 @@ static int mtk_dsi_encoder_init(struct drm_device *drm, struct mtk_dsi *dsi)
 		ret = PTR_ERR(dsi->connector);
 		goto err_cleanup_encoder;
 	}
+
+	ret = drm_connector_init_panel_orientation_property(dsi->connector);
+	if (ret) {
+		DRM_ERROR("Unable to init panel orientation\n");
+		goto err_cleanup_encoder;
+	}
+
 	drm_connector_attach_encoder(dsi->connector, &dsi->encoder);
 
 	return 0;
-- 
2.31.1.498.g6c1eba8ee3d-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 24+ messages in thread
* [PATCH v5 2/4] drm/mediatek: init panel orientation property
@ 2021-04-28 17:04   ` Hsin-Yi Wang
  0 siblings, 0 replies; 24+ messages in thread
From: Hsin-Yi Wang @ 2021-04-28 17:04 UTC (permalink / raw)
  To: dri-devel
  Cc: Chun-Kuang Hu, devicetree, David Airlie, linux-kernel,
	Rob Herring, linux-mediatek, Thomas Zimmermann, Matthias Brugger,
	Sean Paul, linux-arm-kernel

Init panel orientation property after connector is initialized. Let the
panel driver decides the orientation value later.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_dsi.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index ae403c67cbd9..9da1fd649131 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -964,6 +964,13 @@ static int mtk_dsi_encoder_init(struct drm_device *drm, struct mtk_dsi *dsi)
 		ret = PTR_ERR(dsi->connector);
 		goto err_cleanup_encoder;
 	}
+
+	ret = drm_connector_init_panel_orientation_property(dsi->connector);
+	if (ret) {
+		DRM_ERROR("Unable to init panel orientation\n");
+		goto err_cleanup_encoder;
+	}
+
 	drm_connector_attach_encoder(dsi->connector, &dsi->encoder);
 
 	return 0;
-- 
2.31.1.498.g6c1eba8ee3d-goog

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply related	[flat|nested] 24+ messages in thread
* [PATCH v5 3/4] drm/i915: init panel orientation property
  2021-04-28 17:04 ` Hsin-Yi Wang
  (?)
  (?)
@ 2021-04-28 17:04   ` Hsin-Yi Wang
  -1 siblings, 0 replies; 24+ messages in thread
From: Hsin-Yi Wang @ 2021-04-28 17:04 UTC (permalink / raw)
  To: dri-devel
  Cc: Chun-Kuang Hu, Sean Paul, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, David Airlie, Daniel Vetter, linux-kernel,
	Rob Herring, Matthias Brugger, devicetree, linux-arm-kernel,
	linux-mediatek

Creating the panel orientation property first since we separate the
property creating and value setting.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
 drivers/gpu/drm/i915/display/icl_dsi.c  | 1 +
 drivers/gpu/drm/i915/display/intel_dp.c | 1 +
 drivers/gpu/drm/i915/display/vlv_dsi.c  | 1 +
 3 files changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index 9282978060b0..162fb3cf0f5a 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -1903,6 +1903,7 @@ static void icl_dsi_add_properties(struct intel_connector *connector)
 
 	connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
 
+	drm_connector_attach_scaling_mode_property(&connector->base);
 	drm_connector_set_panel_orientation_with_quirk(&connector->base,
 				intel_dsi_get_panel_orientation(connector),
 				connector->panel.fixed_mode->hdisplay,
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index a5231ac3443a..f1d664e5abb2 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -5263,6 +5263,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
 	intel_panel_setup_backlight(connector, pipe);
 
 	if (fixed_mode) {
+		drm_connector_init_panel_orientation_property(connector);
 		drm_connector_set_panel_orientation_with_quirk(connector,
 				dev_priv->vbt.orientation,
 				fixed_mode->hdisplay, fixed_mode->vdisplay);
diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
index 9bee99fe5495..853855482af1 100644
--- a/drivers/gpu/drm/i915/display/vlv_dsi.c
+++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
@@ -1632,6 +1632,7 @@ static void vlv_dsi_add_properties(struct intel_connector *connector)
 
 		connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
 
+		drm_connector_init_panel_orientation_property(&connector->base);
 		drm_connector_set_panel_orientation_with_quirk(
 				&connector->base,
 				intel_dsi_get_panel_orientation(connector),
-- 
2.31.1.498.g6c1eba8ee3d-goog


^ permalink raw reply related	[flat|nested] 24+ messages in thread
* [PATCH v5 3/4] drm/i915: init panel orientation property
@ 2021-04-28 17:04   ` Hsin-Yi Wang
  0 siblings, 0 replies; 24+ messages in thread
From: Hsin-Yi Wang @ 2021-04-28 17:04 UTC (permalink / raw)
  To: dri-devel
  Cc: Chun-Kuang Hu, Sean Paul, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, David Airlie, Daniel Vetter, linux-kernel,
	Rob Herring, Matthias Brugger, devicetree, linux-arm-kernel,
	linux-mediatek

Creating the panel orientation property first since we separate the
property creating and value setting.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
 drivers/gpu/drm/i915/display/icl_dsi.c  | 1 +
 drivers/gpu/drm/i915/display/intel_dp.c | 1 +
 drivers/gpu/drm/i915/display/vlv_dsi.c  | 1 +
 3 files changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index 9282978060b0..162fb3cf0f5a 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -1903,6 +1903,7 @@ static void icl_dsi_add_properties(struct intel_connector *connector)
 
 	connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
 
+	drm_connector_attach_scaling_mode_property(&connector->base);
 	drm_connector_set_panel_orientation_with_quirk(&connector->base,
 				intel_dsi_get_panel_orientation(connector),
 				connector->panel.fixed_mode->hdisplay,
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index a5231ac3443a..f1d664e5abb2 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -5263,6 +5263,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
 	intel_panel_setup_backlight(connector, pipe);
 
 	if (fixed_mode) {
+		drm_connector_init_panel_orientation_property(connector);
 		drm_connector_set_panel_orientation_with_quirk(connector,
 				dev_priv->vbt.orientation,
 				fixed_mode->hdisplay, fixed_mode->vdisplay);
diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
index 9bee99fe5495..853855482af1 100644
--- a/drivers/gpu/drm/i915/display/vlv_dsi.c
+++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
@@ -1632,6 +1632,7 @@ static void vlv_dsi_add_properties(struct intel_connector *connector)
 
 		connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
 
+		drm_connector_init_panel_orientation_property(&connector->base);
 		drm_connector_set_panel_orientation_with_quirk(
 				&connector->base,
 				intel_dsi_get_panel_orientation(connector),
-- 
2.31.1.498.g6c1eba8ee3d-goog


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 24+ messages in thread
* [PATCH v5 3/4] drm/i915: init panel orientation property
@ 2021-04-28 17:04   ` Hsin-Yi Wang
  0 siblings, 0 replies; 24+ messages in thread
From: Hsin-Yi Wang @ 2021-04-28 17:04 UTC (permalink / raw)
  To: dri-devel
  Cc: Chun-Kuang Hu, Sean Paul, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, David Airlie, Daniel Vetter, linux-kernel,
	Rob Herring, Matthias Brugger, devicetree, linux-arm-kernel,
	linux-mediatek

Creating the panel orientation property first since we separate the
property creating and value setting.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
 drivers/gpu/drm/i915/display/icl_dsi.c  | 1 +
 drivers/gpu/drm/i915/display/intel_dp.c | 1 +
 drivers/gpu/drm/i915/display/vlv_dsi.c  | 1 +
 3 files changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index 9282978060b0..162fb3cf0f5a 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -1903,6 +1903,7 @@ static void icl_dsi_add_properties(struct intel_connector *connector)
 
 	connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
 
+	drm_connector_attach_scaling_mode_property(&connector->base);
 	drm_connector_set_panel_orientation_with_quirk(&connector->base,
 				intel_dsi_get_panel_orientation(connector),
 				connector->panel.fixed_mode->hdisplay,
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index a5231ac3443a..f1d664e5abb2 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -5263,6 +5263,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
 	intel_panel_setup_backlight(connector, pipe);
 
 	if (fixed_mode) {
+		drm_connector_init_panel_orientation_property(connector);
 		drm_connector_set_panel_orientation_with_quirk(connector,
 				dev_priv->vbt.orientation,
 				fixed_mode->hdisplay, fixed_mode->vdisplay);
diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
index 9bee99fe5495..853855482af1 100644
--- a/drivers/gpu/drm/i915/display/vlv_dsi.c
+++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
@@ -1632,6 +1632,7 @@ static void vlv_dsi_add_properties(struct intel_connector *connector)
 
 		connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
 
+		drm_connector_init_panel_orientation_property(&connector->base);
 		drm_connector_set_panel_orientation_with_quirk(
 				&connector->base,
 				intel_dsi_get_panel_orientation(connector),
-- 
2.31.1.498.g6c1eba8ee3d-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 24+ messages in thread
* [PATCH v5 3/4] drm/i915: init panel orientation property
@ 2021-04-28 17:04   ` Hsin-Yi Wang
  0 siblings, 0 replies; 24+ messages in thread
From: Hsin-Yi Wang @ 2021-04-28 17:04 UTC (permalink / raw)
  To: dri-devel
  Cc: Chun-Kuang Hu, devicetree, David Airlie, linux-kernel,
	Rob Herring, linux-mediatek, Thomas Zimmermann, Matthias Brugger,
	Sean Paul, linux-arm-kernel

Creating the panel orientation property first since we separate the
property creating and value setting.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
 drivers/gpu/drm/i915/display/icl_dsi.c  | 1 +
 drivers/gpu/drm/i915/display/intel_dp.c | 1 +
 drivers/gpu/drm/i915/display/vlv_dsi.c  | 1 +
 3 files changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index 9282978060b0..162fb3cf0f5a 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -1903,6 +1903,7 @@ static void icl_dsi_add_properties(struct intel_connector *connector)
 
 	connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
 
+	drm_connector_attach_scaling_mode_property(&connector->base);
 	drm_connector_set_panel_orientation_with_quirk(&connector->base,
 				intel_dsi_get_panel_orientation(connector),
 				connector->panel.fixed_mode->hdisplay,
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index a5231ac3443a..f1d664e5abb2 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -5263,6 +5263,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
 	intel_panel_setup_backlight(connector, pipe);
 
 	if (fixed_mode) {
+		drm_connector_init_panel_orientation_property(connector);
 		drm_connector_set_panel_orientation_with_quirk(connector,
 				dev_priv->vbt.orientation,
 				fixed_mode->hdisplay, fixed_mode->vdisplay);
diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
index 9bee99fe5495..853855482af1 100644
--- a/drivers/gpu/drm/i915/display/vlv_dsi.c
+++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
@@ -1632,6 +1632,7 @@ static void vlv_dsi_add_properties(struct intel_connector *connector)
 
 		connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
 
+		drm_connector_init_panel_orientation_property(&connector->base);
 		drm_connector_set_panel_orientation_with_quirk(
 				&connector->base,
 				intel_dsi_get_panel_orientation(connector),
-- 
2.31.1.498.g6c1eba8ee3d-goog

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply related	[flat|nested] 24+ messages in thread
* [PATCH v5 4/4] arm64: dts: mt8183: Add panel rotation
  2021-04-28 17:04 ` Hsin-Yi Wang
  (?)
  (?)
@ 2021-04-28 17:04   ` Hsin-Yi Wang
  -1 siblings, 0 replies; 24+ messages in thread
From: Hsin-Yi Wang @ 2021-04-28 17:04 UTC (permalink / raw)
  To: dri-devel
  Cc: Chun-Kuang Hu, Sean Paul, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, David Airlie, Daniel Vetter, linux-kernel,
	Rob Herring, Matthias Brugger, devicetree, linux-arm-kernel,
	linux-mediatek

krane, kakadu, and kodama boards have a default panel rotation.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
 arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index ff56bcfa3370..793cc9501337 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -263,6 +263,7 @@ panel: panel@0 {
 		avee-supply = <&ppvarp_lcd>;
 		pp1800-supply = <&pp1800_lcd>;
 		backlight = <&backlight_lcd0>;
+		rotation = <270>;
 		port {
 			panel_in: endpoint {
 				remote-endpoint = <&dsi_out>;
-- 
2.31.1.498.g6c1eba8ee3d-goog


^ permalink raw reply related	[flat|nested] 24+ messages in thread
* [PATCH v5 4/4] arm64: dts: mt8183: Add panel rotation
@ 2021-04-28 17:04   ` Hsin-Yi Wang
  0 siblings, 0 replies; 24+ messages in thread
From: Hsin-Yi Wang @ 2021-04-28 17:04 UTC (permalink / raw)
  To: dri-devel
  Cc: Chun-Kuang Hu, Sean Paul, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, David Airlie, Daniel Vetter, linux-kernel,
	Rob Herring, Matthias Brugger, devicetree, linux-arm-kernel,
	linux-mediatek

krane, kakadu, and kodama boards have a default panel rotation.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
 arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index ff56bcfa3370..793cc9501337 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -263,6 +263,7 @@ panel: panel@0 {
 		avee-supply = <&ppvarp_lcd>;
 		pp1800-supply = <&pp1800_lcd>;
 		backlight = <&backlight_lcd0>;
+		rotation = <270>;
 		port {
 			panel_in: endpoint {
 				remote-endpoint = <&dsi_out>;
-- 
2.31.1.498.g6c1eba8ee3d-goog


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 24+ messages in thread
* [PATCH v5 4/4] arm64: dts: mt8183: Add panel rotation
@ 2021-04-28 17:04   ` Hsin-Yi Wang
  0 siblings, 0 replies; 24+ messages in thread
From: Hsin-Yi Wang @ 2021-04-28 17:04 UTC (permalink / raw)
  To: dri-devel
  Cc: Chun-Kuang Hu, Sean Paul, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, David Airlie, Daniel Vetter, linux-kernel,
	Rob Herring, Matthias Brugger, devicetree, linux-arm-kernel,
	linux-mediatek

krane, kakadu, and kodama boards have a default panel rotation.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
 arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index ff56bcfa3370..793cc9501337 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -263,6 +263,7 @@ panel: panel@0 {
 		avee-supply = <&ppvarp_lcd>;
 		pp1800-supply = <&pp1800_lcd>;
 		backlight = <&backlight_lcd0>;
+		rotation = <270>;
 		port {
 			panel_in: endpoint {
 				remote-endpoint = <&dsi_out>;
-- 
2.31.1.498.g6c1eba8ee3d-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 24+ messages in thread
* [PATCH v5 4/4] arm64: dts: mt8183: Add panel rotation
@ 2021-04-28 17:04   ` Hsin-Yi Wang
  0 siblings, 0 replies; 24+ messages in thread
From: Hsin-Yi Wang @ 2021-04-28 17:04 UTC (permalink / raw)
  To: dri-devel
  Cc: Chun-Kuang Hu, devicetree, David Airlie, linux-kernel,
	Rob Herring, linux-mediatek, Thomas Zimmermann, Matthias Brugger,
	Sean Paul, linux-arm-kernel

krane, kakadu, and kodama boards have a default panel rotation.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
 arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index ff56bcfa3370..793cc9501337 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -263,6 +263,7 @@ panel: panel@0 {
 		avee-supply = <&ppvarp_lcd>;
 		pp1800-supply = <&pp1800_lcd>;
 		backlight = <&backlight_lcd0>;
+		rotation = <270>;
 		port {
 			panel_in: endpoint {
 				remote-endpoint = <&dsi_out>;
-- 
2.31.1.498.g6c1eba8ee3d-goog

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply related	[flat|nested] 24+ messages in thread
* Re: [PATCH v5 3/4] drm/i915: init panel orientation property
  2021-04-28 17:04   ` Hsin-Yi Wang
  (?)
  (?)
@ 2021-04-28 20:20     ` Sean Paul
  -1 siblings, 0 replies; 24+ messages in thread
From: Sean Paul @ 2021-04-28 20:20 UTC (permalink / raw)
  To: Hsin-Yi Wang
  Cc: dri-devel, Chun-Kuang Hu, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, David Airlie, Daniel Vetter, LKML,
	Rob Herring, Matthias Brugger, devicetree, linux-arm-kernel,
	moderated list:ARM/Mediatek SoC support

On Wed, Apr 28, 2021 at 1:04 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> Creating the panel orientation property first since we separate the
> property creating and value setting.

This should probably be included in patch 1 so you don't regress i915
in between patches.

Sean

>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> ---
>  drivers/gpu/drm/i915/display/icl_dsi.c  | 1 +
>  drivers/gpu/drm/i915/display/intel_dp.c | 1 +
>  drivers/gpu/drm/i915/display/vlv_dsi.c  | 1 +
>  3 files changed, 3 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
> index 9282978060b0..162fb3cf0f5a 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> @@ -1903,6 +1903,7 @@ static void icl_dsi_add_properties(struct intel_connector *connector)
>
>         connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
>
> +       drm_connector_attach_scaling_mode_property(&connector->base);
>         drm_connector_set_panel_orientation_with_quirk(&connector->base,
>                                 intel_dsi_get_panel_orientation(connector),
>                                 connector->panel.fixed_mode->hdisplay,
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index a5231ac3443a..f1d664e5abb2 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -5263,6 +5263,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
>         intel_panel_setup_backlight(connector, pipe);
>
>         if (fixed_mode) {
> +               drm_connector_init_panel_orientation_property(connector);
>                 drm_connector_set_panel_orientation_with_quirk(connector,
>                                 dev_priv->vbt.orientation,
>                                 fixed_mode->hdisplay, fixed_mode->vdisplay);
> diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
> index 9bee99fe5495..853855482af1 100644
> --- a/drivers/gpu/drm/i915/display/vlv_dsi.c
> +++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
> @@ -1632,6 +1632,7 @@ static void vlv_dsi_add_properties(struct intel_connector *connector)
>
>                 connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
>
> +               drm_connector_init_panel_orientation_property(&connector->base);
>                 drm_connector_set_panel_orientation_with_quirk(
>                                 &connector->base,
>                                 intel_dsi_get_panel_orientation(connector),
> --
> 2.31.1.498.g6c1eba8ee3d-goog
>

^ permalink raw reply	[flat|nested] 24+ messages in thread
* Re: [PATCH v5 3/4] drm/i915: init panel orientation property
@ 2021-04-28 20:20     ` Sean Paul
  0 siblings, 0 replies; 24+ messages in thread
From: Sean Paul @ 2021-04-28 20:20 UTC (permalink / raw)
  To: Hsin-Yi Wang
  Cc: dri-devel, Chun-Kuang Hu, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, David Airlie, Daniel Vetter, LKML,
	Rob Herring, Matthias Brugger, devicetree, linux-arm-kernel,
	moderated list:ARM/Mediatek SoC support

On Wed, Apr 28, 2021 at 1:04 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> Creating the panel orientation property first since we separate the
> property creating and value setting.

This should probably be included in patch 1 so you don't regress i915
in between patches.

Sean

>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> ---
>  drivers/gpu/drm/i915/display/icl_dsi.c  | 1 +
>  drivers/gpu/drm/i915/display/intel_dp.c | 1 +
>  drivers/gpu/drm/i915/display/vlv_dsi.c  | 1 +
>  3 files changed, 3 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
> index 9282978060b0..162fb3cf0f5a 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> @@ -1903,6 +1903,7 @@ static void icl_dsi_add_properties(struct intel_connector *connector)
>
>         connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
>
> +       drm_connector_attach_scaling_mode_property(&connector->base);
>         drm_connector_set_panel_orientation_with_quirk(&connector->base,
>                                 intel_dsi_get_panel_orientation(connector),
>                                 connector->panel.fixed_mode->hdisplay,
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index a5231ac3443a..f1d664e5abb2 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -5263,6 +5263,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
>         intel_panel_setup_backlight(connector, pipe);
>
>         if (fixed_mode) {
> +               drm_connector_init_panel_orientation_property(connector);
>                 drm_connector_set_panel_orientation_with_quirk(connector,
>                                 dev_priv->vbt.orientation,
>                                 fixed_mode->hdisplay, fixed_mode->vdisplay);
> diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
> index 9bee99fe5495..853855482af1 100644
> --- a/drivers/gpu/drm/i915/display/vlv_dsi.c
> +++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
> @@ -1632,6 +1632,7 @@ static void vlv_dsi_add_properties(struct intel_connector *connector)
>
>                 connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
>
> +               drm_connector_init_panel_orientation_property(&connector->base);
>                 drm_connector_set_panel_orientation_with_quirk(
>                                 &connector->base,
>                                 intel_dsi_get_panel_orientation(connector),
> --
> 2.31.1.498.g6c1eba8ee3d-goog
>

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 24+ messages in thread
* Re: [PATCH v5 3/4] drm/i915: init panel orientation property
@ 2021-04-28 20:20     ` Sean Paul
  0 siblings, 0 replies; 24+ messages in thread
From: Sean Paul @ 2021-04-28 20:20 UTC (permalink / raw)
  To: Hsin-Yi Wang
  Cc: dri-devel, Chun-Kuang Hu, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, David Airlie, Daniel Vetter, LKML,
	Rob Herring, Matthias Brugger, devicetree, linux-arm-kernel,
	moderated list:ARM/Mediatek SoC support

On Wed, Apr 28, 2021 at 1:04 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> Creating the panel orientation property first since we separate the
> property creating and value setting.

This should probably be included in patch 1 so you don't regress i915
in between patches.

Sean

>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> ---
>  drivers/gpu/drm/i915/display/icl_dsi.c  | 1 +
>  drivers/gpu/drm/i915/display/intel_dp.c | 1 +
>  drivers/gpu/drm/i915/display/vlv_dsi.c  | 1 +
>  3 files changed, 3 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
> index 9282978060b0..162fb3cf0f5a 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> @@ -1903,6 +1903,7 @@ static void icl_dsi_add_properties(struct intel_connector *connector)
>
>         connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
>
> +       drm_connector_attach_scaling_mode_property(&connector->base);
>         drm_connector_set_panel_orientation_with_quirk(&connector->base,
>                                 intel_dsi_get_panel_orientation(connector),
>                                 connector->panel.fixed_mode->hdisplay,
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index a5231ac3443a..f1d664e5abb2 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -5263,6 +5263,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
>         intel_panel_setup_backlight(connector, pipe);
>
>         if (fixed_mode) {
> +               drm_connector_init_panel_orientation_property(connector);
>                 drm_connector_set_panel_orientation_with_quirk(connector,
>                                 dev_priv->vbt.orientation,
>                                 fixed_mode->hdisplay, fixed_mode->vdisplay);
> diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
> index 9bee99fe5495..853855482af1 100644
> --- a/drivers/gpu/drm/i915/display/vlv_dsi.c
> +++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
> @@ -1632,6 +1632,7 @@ static void vlv_dsi_add_properties(struct intel_connector *connector)
>
>                 connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
>
> +               drm_connector_init_panel_orientation_property(&connector->base);
>                 drm_connector_set_panel_orientation_with_quirk(
>                                 &connector->base,
>                                 intel_dsi_get_panel_orientation(connector),
> --
> 2.31.1.498.g6c1eba8ee3d-goog
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 24+ messages in thread
* Re: [PATCH v5 3/4] drm/i915: init panel orientation property
@ 2021-04-28 20:20     ` Sean Paul
  0 siblings, 0 replies; 24+ messages in thread
From: Sean Paul @ 2021-04-28 20:20 UTC (permalink / raw)
  To: Hsin-Yi Wang
  Cc: Chun-Kuang Hu, devicetree, David Airlie, LKML, Rob Herring,
	moderated list:ARM/Mediatek SoC support, dri-devel,
	Thomas Zimmermann, Matthias Brugger, linux-arm-kernel

On Wed, Apr 28, 2021 at 1:04 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> Creating the panel orientation property first since we separate the
> property creating and value setting.

This should probably be included in patch 1 so you don't regress i915
in between patches.

Sean

>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> ---
>  drivers/gpu/drm/i915/display/icl_dsi.c  | 1 +
>  drivers/gpu/drm/i915/display/intel_dp.c | 1 +
>  drivers/gpu/drm/i915/display/vlv_dsi.c  | 1 +
>  3 files changed, 3 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
> index 9282978060b0..162fb3cf0f5a 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> @@ -1903,6 +1903,7 @@ static void icl_dsi_add_properties(struct intel_connector *connector)
>
>         connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
>
> +       drm_connector_attach_scaling_mode_property(&connector->base);
>         drm_connector_set_panel_orientation_with_quirk(&connector->base,
>                                 intel_dsi_get_panel_orientation(connector),
>                                 connector->panel.fixed_mode->hdisplay,
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index a5231ac3443a..f1d664e5abb2 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -5263,6 +5263,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
>         intel_panel_setup_backlight(connector, pipe);
>
>         if (fixed_mode) {
> +               drm_connector_init_panel_orientation_property(connector);
>                 drm_connector_set_panel_orientation_with_quirk(connector,
>                                 dev_priv->vbt.orientation,
>                                 fixed_mode->hdisplay, fixed_mode->vdisplay);
> diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
> index 9bee99fe5495..853855482af1 100644
> --- a/drivers/gpu/drm/i915/display/vlv_dsi.c
> +++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
> @@ -1632,6 +1632,7 @@ static void vlv_dsi_add_properties(struct intel_connector *connector)
>
>                 connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
>
> +               drm_connector_init_panel_orientation_property(&connector->base);
>                 drm_connector_set_panel_orientation_with_quirk(
>                                 &connector->base,
>                                 intel_dsi_get_panel_orientation(connector),
> --
> 2.31.1.498.g6c1eba8ee3d-goog
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 24+ messages in thread
* Re: [PATCH v5 3/4] drm/i915: init panel orientation property
  2021-04-28 17:04   ` Hsin-Yi Wang
  (?)
  (?)
@ 2021-04-29  2:19     ` kernel test robot
  -1 siblings, 0 replies; 24+ messages in thread
From: kernel test robot @ 2021-04-29  2:19 UTC (permalink / raw)
  To: Hsin-Yi Wang, dri-devel
  Cc: kbuild-all, Chun-Kuang Hu, devicetree, David Airlie,
	linux-kernel, Rob Herring, linux-mediatek, Thomas Zimmermann,
	Matthias Brugger, Sean Paul

[-- Attachment #1: Type: text/plain, Size: 3185 bytes --]

Hi Hsin-Yi,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on drm-intel/for-linux-next]
[also build test ERROR on drm-tip/drm-tip drm-exynos/exynos-drm-next tegra-drm/drm/tegra/for-next linus/master v5.12 next-20210428]
[cannot apply to drm/drm-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Hsin-Yi-Wang/gpu-drm-separate-panel-orientation-property-creating-and-value-setting/20210429-010748
base:   git://anongit.freedesktop.org/drm-intel for-linux-next
config: x86_64-allyesconfig (attached as .config)
compiler: gcc-9 (Debian 9.3.0-22) 9.3.0
reproduce (this is a W=1 build):
        # https://github.com/0day-ci/linux/commit/c44e5201c88aadd48cd7f9b257d6df3e0c9765c7
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Hsin-Yi-Wang/gpu-drm-separate-panel-orientation-property-creating-and-value-setting/20210429-010748
        git checkout c44e5201c88aadd48cd7f9b257d6df3e0c9765c7
        # save the attached .config to linux build tree
        make W=1 W=1 ARCH=x86_64 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   drivers/gpu/drm/i915/display/icl_dsi.c: In function 'icl_dsi_add_properties':
>> drivers/gpu/drm/i915/display/icl_dsi.c:1906:2: error: too few arguments to function 'drm_connector_attach_scaling_mode_property'
    1906 |  drm_connector_attach_scaling_mode_property(&connector->base);
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   In file included from include/drm/drm_modes.h:33,
                    from include/drm/drm_crtc.h:40,
                    from include/drm/drm_atomic_helper.h:31,
                    from drivers/gpu/drm/i915/display/icl_dsi.c:28:
   include/drm/drm_connector.h:1670:5: note: declared here
    1670 | int drm_connector_attach_scaling_mode_property(struct drm_connector *connector,
         |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


vim +/drm_connector_attach_scaling_mode_property +1906 drivers/gpu/drm/i915/display/icl_dsi.c

  1892	
  1893	static void icl_dsi_add_properties(struct intel_connector *connector)
  1894	{
  1895		u32 allowed_scalers;
  1896	
  1897		allowed_scalers = BIT(DRM_MODE_SCALE_ASPECT) |
  1898				   BIT(DRM_MODE_SCALE_FULLSCREEN) |
  1899				   BIT(DRM_MODE_SCALE_CENTER);
  1900	
  1901		drm_connector_attach_scaling_mode_property(&connector->base,
  1902							   allowed_scalers);
  1903	
  1904		connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
  1905	
> 1906		drm_connector_attach_scaling_mode_property(&connector->base);
  1907		drm_connector_set_panel_orientation_with_quirk(&connector->base,
  1908					intel_dsi_get_panel_orientation(connector),
  1909					connector->panel.fixed_mode->hdisplay,
  1910					connector->panel.fixed_mode->vdisplay);
  1911	}
  1912	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 65095 bytes --]

^ permalink raw reply	[flat|nested] 24+ messages in thread
* Re: [PATCH v5 3/4] drm/i915: init panel orientation property
@ 2021-04-29  2:19     ` kernel test robot
  0 siblings, 0 replies; 24+ messages in thread
From: kernel test robot @ 2021-04-29  2:19 UTC (permalink / raw)
  To: Hsin-Yi Wang, dri-devel
  Cc: kbuild-all, Chun-Kuang Hu, devicetree, David Airlie,
	linux-kernel, Rob Herring, linux-mediatek, Thomas Zimmermann,
	Matthias Brugger, Sean Paul

[-- Attachment #1: Type: text/plain, Size: 3185 bytes --]

Hi Hsin-Yi,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on drm-intel/for-linux-next]
[also build test ERROR on drm-tip/drm-tip drm-exynos/exynos-drm-next tegra-drm/drm/tegra/for-next linus/master v5.12 next-20210428]
[cannot apply to drm/drm-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Hsin-Yi-Wang/gpu-drm-separate-panel-orientation-property-creating-and-value-setting/20210429-010748
base:   git://anongit.freedesktop.org/drm-intel for-linux-next
config: x86_64-allyesconfig (attached as .config)
compiler: gcc-9 (Debian 9.3.0-22) 9.3.0
reproduce (this is a W=1 build):
        # https://github.com/0day-ci/linux/commit/c44e5201c88aadd48cd7f9b257d6df3e0c9765c7
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Hsin-Yi-Wang/gpu-drm-separate-panel-orientation-property-creating-and-value-setting/20210429-010748
        git checkout c44e5201c88aadd48cd7f9b257d6df3e0c9765c7
        # save the attached .config to linux build tree
        make W=1 W=1 ARCH=x86_64 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   drivers/gpu/drm/i915/display/icl_dsi.c: In function 'icl_dsi_add_properties':
>> drivers/gpu/drm/i915/display/icl_dsi.c:1906:2: error: too few arguments to function 'drm_connector_attach_scaling_mode_property'
    1906 |  drm_connector_attach_scaling_mode_property(&connector->base);
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   In file included from include/drm/drm_modes.h:33,
                    from include/drm/drm_crtc.h:40,
                    from include/drm/drm_atomic_helper.h:31,
                    from drivers/gpu/drm/i915/display/icl_dsi.c:28:
   include/drm/drm_connector.h:1670:5: note: declared here
    1670 | int drm_connector_attach_scaling_mode_property(struct drm_connector *connector,
         |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


vim +/drm_connector_attach_scaling_mode_property +1906 drivers/gpu/drm/i915/display/icl_dsi.c

  1892	
  1893	static void icl_dsi_add_properties(struct intel_connector *connector)
  1894	{
  1895		u32 allowed_scalers;
  1896	
  1897		allowed_scalers = BIT(DRM_MODE_SCALE_ASPECT) |
  1898				   BIT(DRM_MODE_SCALE_FULLSCREEN) |
  1899				   BIT(DRM_MODE_SCALE_CENTER);
  1900	
  1901		drm_connector_attach_scaling_mode_property(&connector->base,
  1902							   allowed_scalers);
  1903	
  1904		connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
  1905	
> 1906		drm_connector_attach_scaling_mode_property(&connector->base);
  1907		drm_connector_set_panel_orientation_with_quirk(&connector->base,
  1908					intel_dsi_get_panel_orientation(connector),
  1909					connector->panel.fixed_mode->hdisplay,
  1910					connector->panel.fixed_mode->vdisplay);
  1911	}
  1912	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 65095 bytes --]

[-- Attachment #3: Type: text/plain, Size: 170 bytes --]

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 24+ messages in thread
* Re: [PATCH v5 3/4] drm/i915: init panel orientation property
@ 2021-04-29  2:19     ` kernel test robot
  0 siblings, 0 replies; 24+ messages in thread
From: kernel test robot @ 2021-04-29  2:19 UTC (permalink / raw)
  To: Hsin-Yi Wang, dri-devel
  Cc: Chun-Kuang Hu, kbuild-all, devicetree, David Airlie,
	linux-kernel, Rob Herring, linux-mediatek, Thomas Zimmermann,
	Matthias Brugger, Sean Paul

[-- Attachment #1: Type: text/plain, Size: 3185 bytes --]

Hi Hsin-Yi,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on drm-intel/for-linux-next]
[also build test ERROR on drm-tip/drm-tip drm-exynos/exynos-drm-next tegra-drm/drm/tegra/for-next linus/master v5.12 next-20210428]
[cannot apply to drm/drm-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Hsin-Yi-Wang/gpu-drm-separate-panel-orientation-property-creating-and-value-setting/20210429-010748
base:   git://anongit.freedesktop.org/drm-intel for-linux-next
config: x86_64-allyesconfig (attached as .config)
compiler: gcc-9 (Debian 9.3.0-22) 9.3.0
reproduce (this is a W=1 build):
        # https://github.com/0day-ci/linux/commit/c44e5201c88aadd48cd7f9b257d6df3e0c9765c7
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Hsin-Yi-Wang/gpu-drm-separate-panel-orientation-property-creating-and-value-setting/20210429-010748
        git checkout c44e5201c88aadd48cd7f9b257d6df3e0c9765c7
        # save the attached .config to linux build tree
        make W=1 W=1 ARCH=x86_64 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   drivers/gpu/drm/i915/display/icl_dsi.c: In function 'icl_dsi_add_properties':
>> drivers/gpu/drm/i915/display/icl_dsi.c:1906:2: error: too few arguments to function 'drm_connector_attach_scaling_mode_property'
    1906 |  drm_connector_attach_scaling_mode_property(&connector->base);
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   In file included from include/drm/drm_modes.h:33,
                    from include/drm/drm_crtc.h:40,
                    from include/drm/drm_atomic_helper.h:31,
                    from drivers/gpu/drm/i915/display/icl_dsi.c:28:
   include/drm/drm_connector.h:1670:5: note: declared here
    1670 | int drm_connector_attach_scaling_mode_property(struct drm_connector *connector,
         |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


vim +/drm_connector_attach_scaling_mode_property +1906 drivers/gpu/drm/i915/display/icl_dsi.c

  1892	
  1893	static void icl_dsi_add_properties(struct intel_connector *connector)
  1894	{
  1895		u32 allowed_scalers;
  1896	
  1897		allowed_scalers = BIT(DRM_MODE_SCALE_ASPECT) |
  1898				   BIT(DRM_MODE_SCALE_FULLSCREEN) |
  1899				   BIT(DRM_MODE_SCALE_CENTER);
  1900	
  1901		drm_connector_attach_scaling_mode_property(&connector->base,
  1902							   allowed_scalers);
  1903	
  1904		connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
  1905	
> 1906		drm_connector_attach_scaling_mode_property(&connector->base);
  1907		drm_connector_set_panel_orientation_with_quirk(&connector->base,
  1908					intel_dsi_get_panel_orientation(connector),
  1909					connector->panel.fixed_mode->hdisplay,
  1910					connector->panel.fixed_mode->vdisplay);
  1911	}
  1912	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 65095 bytes --]

[-- Attachment #3: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 24+ messages in thread
* Re: [PATCH v5 3/4] drm/i915: init panel orientation property
@ 2021-04-29  2:19     ` kernel test robot
  0 siblings, 0 replies; 24+ messages in thread
From: kernel test robot @ 2021-04-29  2:19 UTC (permalink / raw)
  To: kbuild-all

[-- Attachment #1: Type: text/plain, Size: 3255 bytes --]

Hi Hsin-Yi,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on drm-intel/for-linux-next]
[also build test ERROR on drm-tip/drm-tip drm-exynos/exynos-drm-next tegra-drm/drm/tegra/for-next linus/master v5.12 next-20210428]
[cannot apply to drm/drm-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Hsin-Yi-Wang/gpu-drm-separate-panel-orientation-property-creating-and-value-setting/20210429-010748
base:   git://anongit.freedesktop.org/drm-intel for-linux-next
config: x86_64-allyesconfig (attached as .config)
compiler: gcc-9 (Debian 9.3.0-22) 9.3.0
reproduce (this is a W=1 build):
        # https://github.com/0day-ci/linux/commit/c44e5201c88aadd48cd7f9b257d6df3e0c9765c7
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Hsin-Yi-Wang/gpu-drm-separate-panel-orientation-property-creating-and-value-setting/20210429-010748
        git checkout c44e5201c88aadd48cd7f9b257d6df3e0c9765c7
        # save the attached .config to linux build tree
        make W=1 W=1 ARCH=x86_64 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   drivers/gpu/drm/i915/display/icl_dsi.c: In function 'icl_dsi_add_properties':
>> drivers/gpu/drm/i915/display/icl_dsi.c:1906:2: error: too few arguments to function 'drm_connector_attach_scaling_mode_property'
    1906 |  drm_connector_attach_scaling_mode_property(&connector->base);
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   In file included from include/drm/drm_modes.h:33,
                    from include/drm/drm_crtc.h:40,
                    from include/drm/drm_atomic_helper.h:31,
                    from drivers/gpu/drm/i915/display/icl_dsi.c:28:
   include/drm/drm_connector.h:1670:5: note: declared here
    1670 | int drm_connector_attach_scaling_mode_property(struct drm_connector *connector,
         |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


vim +/drm_connector_attach_scaling_mode_property +1906 drivers/gpu/drm/i915/display/icl_dsi.c

  1892	
  1893	static void icl_dsi_add_properties(struct intel_connector *connector)
  1894	{
  1895		u32 allowed_scalers;
  1896	
  1897		allowed_scalers = BIT(DRM_MODE_SCALE_ASPECT) |
  1898				   BIT(DRM_MODE_SCALE_FULLSCREEN) |
  1899				   BIT(DRM_MODE_SCALE_CENTER);
  1900	
  1901		drm_connector_attach_scaling_mode_property(&connector->base,
  1902							   allowed_scalers);
  1903	
  1904		connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
  1905	
> 1906		drm_connector_attach_scaling_mode_property(&connector->base);
  1907		drm_connector_set_panel_orientation_with_quirk(&connector->base,
  1908					intel_dsi_get_panel_orientation(connector),
  1909					connector->panel.fixed_mode->hdisplay,
  1910					connector->panel.fixed_mode->vdisplay);
  1911	}
  1912	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

[-- Attachment #2: config.gz --]
[-- Type: application/gzip, Size: 65095 bytes --]

^ permalink raw reply	[flat|nested] 24+ messages in thread
end of thread, other threads:[~2021-04-29  2:20 UTC | newest]

Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-28 17:04 [PATCH v5 1/4] gpu: drm: separate panel orientation property creating and value setting Hsin-Yi Wang
2021-04-28 17:04 ` Hsin-Yi Wang
2021-04-28 17:04 ` Hsin-Yi Wang
2021-04-28 17:04 ` Hsin-Yi Wang
2021-04-28 17:04 ` [PATCH v5 2/4] drm/mediatek: init panel orientation property Hsin-Yi Wang
2021-04-28 17:04   ` Hsin-Yi Wang
2021-04-28 17:04   ` Hsin-Yi Wang
2021-04-28 17:04   ` Hsin-Yi Wang
2021-04-28 17:04 ` [PATCH v5 3/4] drm/i915: " Hsin-Yi Wang
2021-04-28 17:04   ` Hsin-Yi Wang
2021-04-28 17:04   ` Hsin-Yi Wang
2021-04-28 17:04   ` Hsin-Yi Wang
2021-04-28 20:20   ` Sean Paul
2021-04-28 20:20     ` Sean Paul
2021-04-28 20:20     ` Sean Paul
2021-04-28 20:20     ` Sean Paul
2021-04-29  2:19   ` kernel test robot
2021-04-29  2:19     ` kernel test robot
2021-04-29  2:19     ` kernel test robot
2021-04-29  2:19     ` kernel test robot
2021-04-28 17:04 ` [PATCH v5 4/4] arm64: dts: mt8183: Add panel rotation Hsin-Yi Wang
2021-04-28 17:04   ` Hsin-Yi Wang
2021-04-28 17:04   ` Hsin-Yi Wang
2021-04-28 17:04   ` Hsin-Yi Wang

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.