All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [PATCH v2 02/10] net: mvpp2: add CP115 port1 10G/5G SFI support
Date: Mon,  3 May 2021 08:08:45 +0200	[thread overview]
Message-ID: <20210503060853.3743626-3-sr@denx.de> (raw)
In-Reply-To: <20210503060853.3743626-1-sr@denx.de>

From: Stefan Chulski <stefanc@marvell.com>

1. Differ between Port1 RGMII and SFI modes in Netcomplex config.
2. Remove XPCS config from SFI mode.
   Port1 doesn't XPCS domain, XPCS config should be removed.
   Access to Port1 XPCS can cause stall.
3. Add Port1 MPCS configurations.

Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
---

(no changes since v1)

 drivers/net/mvpp2.c | 75 ++++++++++-----------------------------------
 1 file changed, 17 insertions(+), 58 deletions(-)

diff --git a/drivers/net/mvpp2.c b/drivers/net/mvpp2.c
index 1cf522b8fe57..015f5329de74 100644
--- a/drivers/net/mvpp2.c
+++ b/drivers/net/mvpp2.c
@@ -520,8 +520,9 @@ do {									\
 /* Net Complex */
 enum mv_netc_topology {
 	MV_NETC_GE_MAC2_SGMII		=	BIT(0),
-	MV_NETC_GE_MAC3_SGMII		=	BIT(1),
-	MV_NETC_GE_MAC3_RGMII		=	BIT(2),
+	MV_NETC_GE_MAC2_RGMII		=	BIT(1),
+	MV_NETC_GE_MAC3_SGMII		=	BIT(2),
+	MV_NETC_GE_MAC3_RGMII		=	BIT(3),
 };
 
 enum mv_netc_phase {
@@ -3208,56 +3209,31 @@ static int gop_gpcs_reset(struct mvpp2_port *port, int reset)
 	return 0;
 }
 
-/* Set the internal mux's to the required PCS in the PI */
-static int gop_xpcs_mode(struct mvpp2_port *port, int num_of_lanes)
-{
-	u32 val;
-	int lane;
-
-	switch (num_of_lanes) {
-	case 1:
-		lane = 0;
-		break;
-	case 2:
-		lane = 1;
-		break;
-	case 4:
-		lane = 2;
-		break;
-	default:
-		return -1;
-	}
-
-	/* configure XG MAC mode */
-	val = readl(port->priv->xpcs_base + MVPP22_XPCS_GLOBAL_CFG_0_REG);
-	val &= ~MVPP22_XPCS_PCSMODE_MASK;
-	val &= ~MVPP22_XPCS_LANEACTIVE_MASK;
-	val |= (2 * lane) << MVPP22_XPCS_LANEACTIVE_OFFS;
-	writel(val, port->priv->xpcs_base + MVPP22_XPCS_GLOBAL_CFG_0_REG);
-
-	return 0;
-}
-
 static int gop_mpcs_mode(struct mvpp2_port *port)
 {
 	u32 val;
 
 	/* configure PCS40G COMMON CONTROL */
-	val = readl(port->priv->mpcs_base + PCS40G_COMMON_CONTROL);
+	val = readl(port->priv->mpcs_base + port->gop_id * MVPP22_PORT_OFFSET +
+		    PCS40G_COMMON_CONTROL);
 	val &= ~FORWARD_ERROR_CORRECTION_MASK;
-	writel(val, port->priv->mpcs_base + PCS40G_COMMON_CONTROL);
+	writel(val, port->priv->mpcs_base + port->gop_id * MVPP22_PORT_OFFSET +
+	       PCS40G_COMMON_CONTROL);
 
 	/* configure PCS CLOCK RESET */
-	val = readl(port->priv->mpcs_base + PCS_CLOCK_RESET);
+	val = readl(port->priv->mpcs_base + port->gop_id * MVPP22_PORT_OFFSET +
+		    PCS_CLOCK_RESET);
 	val &= ~CLK_DIVISION_RATIO_MASK;
 	val |= 1 << CLK_DIVISION_RATIO_OFFS;
-	writel(val, port->priv->mpcs_base + PCS_CLOCK_RESET);
+	writel(val, port->priv->mpcs_base + port->gop_id * MVPP22_PORT_OFFSET +
+	       PCS_CLOCK_RESET);
 
 	val &= ~CLK_DIV_PHASE_SET_MASK;
 	val |= MAC_CLK_RESET_MASK;
 	val |= RX_SD_CLK_RESET_MASK;
 	val |= TX_SD_CLK_RESET_MASK;
-	writel(val, port->priv->mpcs_base + PCS_CLOCK_RESET);
+	writel(val, port->priv->mpcs_base + port->gop_id * MVPP22_PORT_OFFSET +
+	       PCS_CLOCK_RESET);
 
 	return 0;
 }
@@ -3300,22 +3276,6 @@ static int gop_xlg_mac_mode_cfg(struct mvpp2_port *port, int num_of_act_lanes)
 	return 0;
 }
 
-/* Set PCS to reset or exit from reset */
-static int gop_xpcs_reset(struct mvpp2_port *port, int reset)
-{
-	u32 val;
-
-	/* read - modify - write */
-	val = readl(port->priv->xpcs_base + MVPP22_XPCS_GLOBAL_CFG_0_REG);
-	if (reset)
-		val &= ~MVPP22_XPCS_PCSRESET;
-	else
-		val |= MVPP22_XPCS_PCSRESET;
-	writel(val, port->priv->xpcs_base + MVPP22_XPCS_GLOBAL_CFG_0_REG);
-
-	return 0;
-}
-
 /* Set the MAC to reset or exit from reset */
 static int gop_xlg_mac_reset(struct mvpp2_port *port, int reset)
 {
@@ -3387,14 +3347,10 @@ static int gop_port_init(struct mvpp2_port *port)
 		num_of_act_lanes = 2;
 		mac_num = 0;
 		/* configure PCS */
-		gop_xpcs_mode(port, num_of_act_lanes);
 		gop_mpcs_mode(port);
 		/* configure MAC */
 		gop_xlg_mac_mode_cfg(port, num_of_act_lanes);
 
-		/* pcs unreset */
-		gop_xpcs_reset(port, 0);
-
 		/* mac unreset */
 		gop_xlg_mac_reset(port, 0);
 		break;
@@ -3465,6 +3421,9 @@ static u32 mvpp2_netc_cfg_create(int gop_id, phy_interface_t phy_type)
 	if (gop_id == 2) {
 		if (phy_type == PHY_INTERFACE_MODE_SGMII)
 			val |= MV_NETC_GE_MAC2_SGMII;
+		else if (phy_type == PHY_INTERFACE_MODE_RGMII ||
+			 phy_type == PHY_INTERFACE_MODE_RGMII_ID)
+			val |= MV_NETC_GE_MAC2_RGMII;
 	}
 
 	if (gop_id == 3) {
@@ -3656,7 +3615,7 @@ static int gop_netc_init(struct mvpp2 *priv, enum mv_netc_phase phase)
 
 	if (c & MV_NETC_GE_MAC2_SGMII)
 		gop_netc_mac_to_sgmii(priv, 2, phase);
-	else
+	else if (c & MV_NETC_GE_MAC2_RGMII)
 		gop_netc_mac_to_xgmii(priv, 2, phase);
 
 	if (c & MV_NETC_GE_MAC3_SGMII) {
-- 
2.31.1

  parent reply	other threads:[~2021-05-03  6:08 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-03  6:08 [PATCH v2 00/10] net: mvpp2: Sync Marvell mvpp2 driver with Marvell version Stefan Roese
2021-05-03  6:08 ` [PATCH v2 01/10] phy: introduce 1000BaseX and 2500BaseX modes Stefan Roese
2021-05-03  6:08 ` Stefan Roese [this message]
2021-05-03  6:08 ` [PATCH v2 03/10] net: mvpp2: add 1000BaseX and 2500BaseX ppv2 support Stefan Roese
2021-05-03 19:41   ` Ramon Fried
2021-05-03  6:08 ` [PATCH v2 04/10] net: mvpp2: remove redundant SMI address configuration Stefan Roese
2021-05-03 19:41   ` Ramon Fried
2021-05-03  6:08 ` [PATCH v2 05/10] net: mvpp2: Fix 2.5G GMII_SPEED configurations Stefan Roese
2021-05-03  6:08 ` [PATCH v2 06/10] net: mvpp2: AN Bypass in 1000 and 2500 basex mode Stefan Roese
2021-05-03  6:08 ` [PATCH v2 07/10] net: mvpp2: remove unused define MVPP22_SMI_PHY_ADDR_REG Stefan Roese
2021-05-03 19:41   ` Ramon Fried
2021-05-03  6:08 ` [PATCH v2 08/10] net: mvpp2: fix missing switch case break Stefan Roese
2021-05-03 19:41   ` Ramon Fried
2021-05-03  6:08 ` [PATCH v2 09/10] net: mvpp2: allow MDIO registration for fixed links Stefan Roese
2021-05-03  6:08 ` [PATCH v2 10/10] net: mvpp2: add explicit sgmii-2500 support Stefan Roese
2021-05-03 19:41   ` Ramon Fried

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210503060853.3743626-3-sr@denx.de \
    --to=sr@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.