[PATCH AUTOSEL 4.9 01/24] scsi: target: pscsi: Fix warning in pscsi_complete_cmd()

[PATCH AUTOSEL 4.9 01/24] scsi: target: pscsi: Fix warning in pscsi_complete_cmd()

[Sasha Levin]

From: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>

[ Upstream commit fd48c056a32ed6e7754c7c475490f3bed54ed378 ]

This fixes a compilation warning in pscsi_complete_cmd():

     drivers/target/target_core_pscsi.c: In function ‘pscsi_complete_cmd’:
     drivers/target/target_core_pscsi.c:624:5: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
     ; /* XXX: TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE */

Link: https://lore.kernel.org/r/20210228055645.22253-5-chaitanya.kulkarni@wdc.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_pscsi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c
index 079db0bd3917..089ba39f76a2 100644
--- a/drivers/target/target_core_pscsi.c
+++ b/drivers/target/target_core_pscsi.c
@@ -629,8 +629,9 @@ static void pscsi_transport_complete(struct se_cmd *cmd, struct scatterlist *sg,
 			unsigned char *buf;
 
 			buf = transport_kmap_data_sg(cmd);
-			if (!buf)
+			if (!buf) {
 				; /* XXX: TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE */
+			}
 
 			if (cdb[0] == MODE_SENSE_10) {
 				if (!(buf[3] & 0x80))
-- 
2.30.2

[PATCH AUTOSEL 4.9 02/24] media: ite-cir: check for receive overflow

[Sasha Levin]

From: Sean Young <sean@mess.org>

[ Upstream commit 28c7afb07ccfc0a939bb06ac1e7afe669901c65a ]

It's best if this condition is reported.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/rc/ite-cir.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/media/rc/ite-cir.c b/drivers/media/rc/ite-cir.c
index 63165d324fff..7d3e50d94d86 100644
--- a/drivers/media/rc/ite-cir.c
+++ b/drivers/media/rc/ite-cir.c
@@ -292,8 +292,14 @@ static irqreturn_t ite_cir_isr(int irq, void *data)
 	/* read the interrupt flags */
 	iflags = dev->params.get_irq_causes(dev);
 
+	/* Check for RX overflow */
+	if (iflags & ITE_IRQ_RX_FIFO_OVERRUN) {
+		dev_warn(&dev->rdev->dev, "receive overflow\n");
+		ir_raw_event_reset(dev->rdev);
+	}
+
 	/* check for the receive interrupt */
-	if (iflags & (ITE_IRQ_RX_FIFO | ITE_IRQ_RX_FIFO_OVERRUN)) {
+	if (iflags & ITE_IRQ_RX_FIFO) {
 		/* read the FIFO bytes */
 		rx_bytes =
 			dev->params.get_rx_bytes(dev, rx_buf,
-- 
2.30.2

[PATCH AUTOSEL 4.9 03/24] extcon: arizona: Fix some issues when HPDET IRQ fires after the jack has been unplugged

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit c309a3e8793f7e01c4a4ec7960658380572cb576 ]

When the jack is partially inserted and then removed again it may be
removed while the hpdet code is running. In this case the following
may happen:

1. The "JACKDET rise" or ""JACKDET fall" IRQ triggers
2. arizona_jackdet runs and takes info->lock
3. The "HPDET" IRQ triggers
4. arizona_hpdet_irq runs, blocks on info->lock
5. arizona_jackdet calls arizona_stop_mic() and clears info->hpdet_done
6. arizona_jackdet releases info->lock
7. arizona_hpdet_irq now can continue running and:
7.1 Calls arizona_start_mic() (if a mic was detected)
7.2 sets info->hpdet_done

Step 7 is undesirable / a bug:
7.1 causes the device to stay in a high power-state (with MICVDD enabled)
7.2 causes hpdet to not run on the next jack insertion, which in turn
    causes the EXTCON_JACK_HEADPHONE state to never get set

This fixes both issues by skipping these 2 steps when arizona_hpdet_irq
runs after the jack has been unplugged.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/extcon/extcon-arizona.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index 4c0b6df8b5dd..1d06d99b8bd9 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -601,7 +601,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
 	struct arizona *arizona = info->arizona;
 	int id_gpio = arizona->pdata.hpdet_id_gpio;
 	unsigned int report = EXTCON_JACK_HEADPHONE;
-	int ret, reading;
+	int ret, reading, state;
 	bool mic = false;
 
 	mutex_lock(&info->lock);
@@ -614,12 +614,11 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
 	}
 
 	/* If the cable was removed while measuring ignore the result */
-	ret = extcon_get_state(info->edev, EXTCON_MECHANICAL);
-	if (ret < 0) {
-		dev_err(arizona->dev, "Failed to check cable state: %d\n",
-			ret);
+	state = extcon_get_state(info->edev, EXTCON_MECHANICAL);
+	if (state < 0) {
+		dev_err(arizona->dev, "Failed to check cable state: %d\n", state);
 		goto out;
-	} else if (!ret) {
+	} else if (!state) {
 		dev_dbg(arizona->dev, "Ignoring HPDET for removed cable\n");
 		goto done;
 	}
@@ -672,7 +671,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
 			   ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
 
 	/* If we have a mic then reenable MICDET */
-	if (mic || info->mic)
+	if (state && (mic || info->mic))
 		arizona_start_mic(info);
 
 	if (info->hpdet_active) {
@@ -680,7 +679,9 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
 		info->hpdet_active = false;
 	}
 
-	info->hpdet_done = true;
+	/* Do not set hp_det done when the cable has been unplugged */
+	if (state)
+		info->hpdet_done = true;
 
 out:
 	mutex_unlock(&info->lock);
-- 
2.30.2

[PATCH AUTOSEL 4.9 04/24] media: media/saa7164: fix saa7164_encoder_register() memory leak bugs

[Sasha Levin]

From: Daniel Niv <danielniv3@gmail.com>

[ Upstream commit c759b2970c561e3b56aa030deb13db104262adfe ]

Add a fix for the memory leak bugs that can occur when the
saa7164_encoder_register() function fails.
The function allocates memory without explicitly freeing
it when errors occur.
Add a better error handling that deallocate the unused buffers before the
function exits during a fail.

Signed-off-by: Daniel Niv <danielniv3@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/saa7164/saa7164-encoder.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/media/pci/saa7164/saa7164-encoder.c b/drivers/media/pci/saa7164/saa7164-encoder.c
index 32a353d162e7..f2e6fbfa019f 100644
--- a/drivers/media/pci/saa7164/saa7164-encoder.c
+++ b/drivers/media/pci/saa7164/saa7164-encoder.c
@@ -1030,7 +1030,7 @@ int saa7164_encoder_register(struct saa7164_port *port)
 		       "(errno = %d), NO PCI configuration\n",
 			__func__, result);
 		result = -ENOMEM;
-		goto failed;
+		goto fail_pci;
 	}
 
 	/* Establish encoder defaults here */
@@ -1084,7 +1084,7 @@ int saa7164_encoder_register(struct saa7164_port *port)
 			  100000, ENCODER_DEF_BITRATE);
 	if (hdl->error) {
 		result = hdl->error;
-		goto failed;
+		goto fail_hdl;
 	}
 
 	port->std = V4L2_STD_NTSC_M;
@@ -1102,7 +1102,7 @@ int saa7164_encoder_register(struct saa7164_port *port)
 		printk(KERN_INFO "%s: can't allocate mpeg device\n",
 			dev->name);
 		result = -ENOMEM;
-		goto failed;
+		goto fail_hdl;
 	}
 
 	port->v4l_device->ctrl_handler = hdl;
@@ -1113,10 +1113,7 @@ int saa7164_encoder_register(struct saa7164_port *port)
 	if (result < 0) {
 		printk(KERN_INFO "%s: can't register mpeg device\n",
 			dev->name);
-		/* TODO: We're going to leak here if we don't dealloc
-		 The buffers above. The unreg function can't deal wit it.
-		*/
-		goto failed;
+		goto fail_reg;
 	}
 
 	printk(KERN_INFO "%s: registered device video%d [mpeg]\n",
@@ -1138,9 +1135,14 @@ int saa7164_encoder_register(struct saa7164_port *port)
 
 	saa7164_api_set_encoder(port);
 	saa7164_api_get_encoder(port);
+	return 0;
 
-	result = 0;
-failed:
+fail_reg:
+	video_device_release(port->v4l_device);
+	port->v4l_device = NULL;
+fail_hdl:
+	v4l2_ctrl_handler_free(hdl);
+fail_pci:
 	return result;
 }
 
-- 
2.30.2

[PATCH AUTOSEL 4.9 05/24] media: gspca/sq905.c: fix uninitialized variable

[Sasha Levin]

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit eaaea4681984c79d2b2b160387b297477f0c1aab ]

act_len can be uninitialized if usb_bulk_msg() returns an error.
Set it to 0 to avoid a KMSAN error.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: syzbot+a4e309017a5f3a24c7b3@syzkaller.appspotmail.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/gspca/sq905.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/usb/gspca/sq905.c b/drivers/media/usb/gspca/sq905.c
index a7ae0ec9fa91..03322d2b2e82 100644
--- a/drivers/media/usb/gspca/sq905.c
+++ b/drivers/media/usb/gspca/sq905.c
@@ -172,7 +172,7 @@ static int
 sq905_read_data(struct gspca_dev *gspca_dev, u8 *data, int size, int need_lock)
 {
 	int ret;
-	int act_len;
+	int act_len = 0;
 
 	gspca_dev->usb_buf[0] = '\0';
 	if (need_lock)
-- 
2.30.2

[PATCH AUTOSEL 4.9 06/24] media: pci: saa7164: Rudimentary spelling fixes in the file saa7164-types.h

[Sasha Levin]

From: Bhaskar Chowdhury <unixbhaskar@gmail.com>

[ Upstream commit 4b19f9716ad89af51f07f9b611aabfd5fd80c625 ]

s/structues/structures/
s/decies/decides/

Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/saa7164/saa7164-types.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/pci/saa7164/saa7164-types.h b/drivers/media/pci/saa7164/saa7164-types.h
index 1efba6c64ebf..5f3fc64d5efc 100644
--- a/drivers/media/pci/saa7164/saa7164-types.h
+++ b/drivers/media/pci/saa7164/saa7164-types.h
@@ -21,7 +21,7 @@
 
 /* TODO: Cleanup and shorten the namespace */
 
-/* Some structues are passed directly to/from the firmware and
+/* Some structures are passed directly to/from the firmware and
  * have strict alignment requirements. This is one of them.
  */
 struct tmComResHWDescr {
@@ -42,7 +42,7 @@ struct tmComResHWDescr {
 /* This is DWORD aligned on windows but I can't find the right
  * gcc syntax to match the binary data from the device.
  * I've manually padded with Reserved[3] bytes to match the hardware,
- * but this could break if GCC decies to pack in a different way.
+ * but this could break if GCC decides to pack in a different way.
  */
 struct tmComResInterfaceDescr {
 	u8	bLength;
-- 
2.30.2

[PATCH AUTOSEL 4.9 07/24] power: supply: Use IRQF_ONESHOT

[Sasha Levin]

From: dongjian <dongjian@yulong.com>

[ Upstream commit 2469b836fa835c67648acad17d62bc805236a6ea ]

Fixes coccicheck error:

drivers/power/supply/pm2301_charger.c:1089:7-27: ERROR:
drivers/power/supply/lp8788-charger.c:502:8-28: ERROR:
drivers/power/supply/tps65217_charger.c:239:8-33: ERROR:
drivers/power/supply/tps65090-charger.c:303:8-33: ERROR:

Threaded IRQ with no primary handler requested without IRQF_ONESHOT

Signed-off-by: dongjian <dongjian@yulong.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/lp8788-charger.c   | 2 +-
 drivers/power/supply/pm2301_charger.c   | 2 +-
 drivers/power/supply/tps65090-charger.c | 2 +-
 drivers/power/supply/tps65217_charger.c | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/power/supply/lp8788-charger.c b/drivers/power/supply/lp8788-charger.c
index c3075ea011b6..e800beff1f8f 100644
--- a/drivers/power/supply/lp8788-charger.c
+++ b/drivers/power/supply/lp8788-charger.c
@@ -532,7 +532,7 @@ static int lp8788_set_irqs(struct platform_device *pdev,
 
 		ret = request_threaded_irq(virq, NULL,
 					lp8788_charger_irq_thread,
-					0, name, pchg);
+					IRQF_ONESHOT, name, pchg);
 		if (ret)
 			break;
 	}
diff --git a/drivers/power/supply/pm2301_charger.c b/drivers/power/supply/pm2301_charger.c
index 78561b6884fc..9ef218d76aa9 100644
--- a/drivers/power/supply/pm2301_charger.c
+++ b/drivers/power/supply/pm2301_charger.c
@@ -1098,7 +1098,7 @@ static int pm2xxx_wall_charger_probe(struct i2c_client *i2c_client,
 	ret = request_threaded_irq(gpio_to_irq(pm2->pdata->gpio_irq_number),
 				NULL,
 				pm2xxx_charger_irq[0].isr,
-				pm2->pdata->irq_type,
+				pm2->pdata->irq_type | IRQF_ONESHOT,
 				pm2xxx_charger_irq[0].name, pm2);
 
 	if (ret != 0) {
diff --git a/drivers/power/supply/tps65090-charger.c b/drivers/power/supply/tps65090-charger.c
index 1b4b5e09538e..297bf58f0d4f 100644
--- a/drivers/power/supply/tps65090-charger.c
+++ b/drivers/power/supply/tps65090-charger.c
@@ -311,7 +311,7 @@ static int tps65090_charger_probe(struct platform_device *pdev)
 
 	if (irq != -ENXIO) {
 		ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
-			tps65090_charger_isr, 0, "tps65090-charger", cdata);
+			tps65090_charger_isr, IRQF_ONESHOT, "tps65090-charger", cdata);
 		if (ret) {
 			dev_err(cdata->dev,
 				"Unable to register irq %d err %d\n", irq,
diff --git a/drivers/power/supply/tps65217_charger.c b/drivers/power/supply/tps65217_charger.c
index 9fd019f9b88c..a6b4eb61b4bb 100644
--- a/drivers/power/supply/tps65217_charger.c
+++ b/drivers/power/supply/tps65217_charger.c
@@ -238,7 +238,7 @@ static int tps65217_charger_probe(struct platform_device *pdev)
 	if (irq != -ENXIO) {
 		ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 						tps65217_charger_irq,
-						0, "tps65217-charger",
+						IRQF_ONESHOT, "tps65217-charger",
 						charger);
 		if (ret) {
 			dev_err(charger->dev,
-- 
2.30.2

[PATCH AUTOSEL 4.9 08/24] drm/bridge/analogix/anx78xx: Setup encoder before registering connector

[Sasha Levin]

From: Lyude Paul <lyude@redhat.com>

[ Upstream commit 9962849d0871f5e53d0e3b3d84561f8f2847fbf4 ]

Since encoder mappings for connectors are exposed to userspace, we should
be attaching the encoder before exposing the connector to userspace. Just a
drive-by fix for an issue I noticed while fixing up usages of
drm_dp_aux_init()/drm_dp_aux_register() across the tree.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219215326.2227596-9-lyude@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/analogix-anx78xx.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.c b/drivers/gpu/drm/bridge/analogix-anx78xx.c
index eb97e88a103c..16babacb7cf0 100644
--- a/drivers/gpu/drm/bridge/analogix-anx78xx.c
+++ b/drivers/gpu/drm/bridge/analogix-anx78xx.c
@@ -1045,12 +1045,6 @@ static int anx78xx_bridge_attach(struct drm_bridge *bridge)
 	drm_connector_helper_add(&anx78xx->connector,
 				 &anx78xx_connector_helper_funcs);
 
-	err = drm_connector_register(&anx78xx->connector);
-	if (err) {
-		DRM_ERROR("Failed to register connector: %d\n", err);
-		return err;
-	}
-
 	anx78xx->connector.polled = DRM_CONNECTOR_POLL_HPD;
 
 	err = drm_mode_connector_attach_encoder(&anx78xx->connector,
@@ -1060,6 +1054,12 @@ static int anx78xx_bridge_attach(struct drm_bridge *bridge)
 		return err;
 	}
 
+	err = drm_connector_register(&anx78xx->connector);
+	if (err) {
+		DRM_ERROR("Failed to register connector: %d\n", err);
+		return err;
+	}
+
 	return 0;
 }
 
-- 
2.30.2

[PATCH AUTOSEL 4.9 08/24] drm/bridge/analogix/anx78xx: Setup encoder before registering connector

[Sasha Levin]

From: Lyude Paul <lyude@redhat.com>

[ Upstream commit 9962849d0871f5e53d0e3b3d84561f8f2847fbf4 ]

Since encoder mappings for connectors are exposed to userspace, we should
be attaching the encoder before exposing the connector to userspace. Just a
drive-by fix for an issue I noticed while fixing up usages of
drm_dp_aux_init()/drm_dp_aux_register() across the tree.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219215326.2227596-9-lyude@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/analogix-anx78xx.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.c b/drivers/gpu/drm/bridge/analogix-anx78xx.c
index eb97e88a103c..16babacb7cf0 100644
--- a/drivers/gpu/drm/bridge/analogix-anx78xx.c
+++ b/drivers/gpu/drm/bridge/analogix-anx78xx.c
@@ -1045,12 +1045,6 @@ static int anx78xx_bridge_attach(struct drm_bridge *bridge)
 	drm_connector_helper_add(&anx78xx->connector,
 				 &anx78xx_connector_helper_funcs);
 
-	err = drm_connector_register(&anx78xx->connector);
-	if (err) {
-		DRM_ERROR("Failed to register connector: %d\n", err);
-		return err;
-	}
-
 	anx78xx->connector.polled = DRM_CONNECTOR_POLL_HPD;
 
 	err = drm_mode_connector_attach_encoder(&anx78xx->connector,
@@ -1060,6 +1054,12 @@ static int anx78xx_bridge_attach(struct drm_bridge *bridge)
 		return err;
 	}
 
+	err = drm_connector_register(&anx78xx->connector);
+	if (err) {
+		DRM_ERROR("Failed to register connector: %d\n", err);
+		return err;
+	}
+
 	return 0;
 }
 
-- 
2.30.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH AUTOSEL 4.9 08/24] drm/bridge/analogix/anx78xx: Setup encoder before registering connector

[Lyude Paul]

I would drop this patch for all of the stable kernel versions, it doesn't
really fix any user reported issues.

The other patches CC'd to me look fine for stable though

On Mon, 2021-05-03 at 12:42 -0400, Sasha Levin wrote:
> From: Lyude Paul <lyude@redhat.com>
> 
> [ Upstream commit 9962849d0871f5e53d0e3b3d84561f8f2847fbf4 ]
> 
> Since encoder mappings for connectors are exposed to userspace, we should
> be attaching the encoder before exposing the connector to userspace. Just a
> drive-by fix for an issue I noticed while fixing up usages of
> drm_dp_aux_init()/drm_dp_aux_register() across the tree.
> 
> Signed-off-by: Lyude Paul <lyude@redhat.com>
> Reviewed-by: Robert Foss <robert.foss@linaro.org>
> Link:
> https://patchwork.freedesktop.org/patch/msgid/20210219215326.2227596-9-lyude@redhat.com
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/gpu/drm/bridge/analogix-anx78xx.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.c
> b/drivers/gpu/drm/bridge/analogix-anx78xx.c
> index eb97e88a103c..16babacb7cf0 100644
> --- a/drivers/gpu/drm/bridge/analogix-anx78xx.c
> +++ b/drivers/gpu/drm/bridge/analogix-anx78xx.c
> @@ -1045,12 +1045,6 @@ static int anx78xx_bridge_attach(struct drm_bridge
> *bridge)
>         drm_connector_helper_add(&anx78xx->connector,
>                                  &anx78xx_connector_helper_funcs);
>  
> -       err = drm_connector_register(&anx78xx->connector);
> -       if (err) {
> -               DRM_ERROR("Failed to register connector: %d\n", err);
> -               return err;
> -       }
> -
>         anx78xx->connector.polled = DRM_CONNECTOR_POLL_HPD;
>  
>         err = drm_mode_connector_attach_encoder(&anx78xx->connector,
> @@ -1060,6 +1054,12 @@ static int anx78xx_bridge_attach(struct drm_bridge
> *bridge)
>                 return err;
>         }
>  
> +       err = drm_connector_register(&anx78xx->connector);
> +       if (err) {
> +               DRM_ERROR("Failed to register connector: %d\n", err);
> +               return err;
> +       }
> +
>         return 0;
>  }
>  

-- 
Cheers,
 Lyude Paul (she/her)
 Software Engineer at Red Hat

Re: [PATCH AUTOSEL 4.9 08/24] drm/bridge/analogix/anx78xx: Setup encoder before registering connector

[Lyude Paul]

I would drop this patch for all of the stable kernel versions, it doesn't
really fix any user reported issues.

The other patches CC'd to me look fine for stable though

On Mon, 2021-05-03 at 12:42 -0400, Sasha Levin wrote:
> From: Lyude Paul <lyude@redhat.com>
> 
> [ Upstream commit 9962849d0871f5e53d0e3b3d84561f8f2847fbf4 ]
> 
> Since encoder mappings for connectors are exposed to userspace, we should
> be attaching the encoder before exposing the connector to userspace. Just a
> drive-by fix for an issue I noticed while fixing up usages of
> drm_dp_aux_init()/drm_dp_aux_register() across the tree.
> 
> Signed-off-by: Lyude Paul <lyude@redhat.com>
> Reviewed-by: Robert Foss <robert.foss@linaro.org>
> Link:
> https://patchwork.freedesktop.org/patch/msgid/20210219215326.2227596-9-lyude@redhat.com
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/gpu/drm/bridge/analogix-anx78xx.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.c
> b/drivers/gpu/drm/bridge/analogix-anx78xx.c
> index eb97e88a103c..16babacb7cf0 100644
> --- a/drivers/gpu/drm/bridge/analogix-anx78xx.c
> +++ b/drivers/gpu/drm/bridge/analogix-anx78xx.c
> @@ -1045,12 +1045,6 @@ static int anx78xx_bridge_attach(struct drm_bridge
> *bridge)
>         drm_connector_helper_add(&anx78xx->connector,
>                                  &anx78xx_connector_helper_funcs);
>  
> -       err = drm_connector_register(&anx78xx->connector);
> -       if (err) {
> -               DRM_ERROR("Failed to register connector: %d\n", err);
> -               return err;
> -       }
> -
>         anx78xx->connector.polled = DRM_CONNECTOR_POLL_HPD;
>  
>         err = drm_mode_connector_attach_encoder(&anx78xx->connector,
> @@ -1060,6 +1054,12 @@ static int anx78xx_bridge_attach(struct drm_bridge
> *bridge)
>                 return err;
>         }
>  
> +       err = drm_connector_register(&anx78xx->connector);
> +       if (err) {
> +               DRM_ERROR("Failed to register connector: %d\n", err);
> +               return err;
> +       }
> +
>         return 0;
>  }
>  

-- 
Cheers,
 Lyude Paul (she/her)
 Software Engineer at Red Hat

Re: [PATCH AUTOSEL 4.9 08/24] drm/bridge/analogix/anx78xx: Setup encoder before registering connector

[Sasha Levin]

On Thu, May 06, 2021 at 01:14:10PM -0400, Lyude Paul wrote:
>I would drop this patch for all of the stable kernel versions, it doesn't
>really fix any user reported issues.

Will do, thanks!

-- 
Thanks,
Sasha

Re: [PATCH AUTOSEL 4.9 08/24] drm/bridge/analogix/anx78xx: Setup encoder before registering connector

[Sasha Levin]

On Thu, May 06, 2021 at 01:14:10PM -0400, Lyude Paul wrote:
>I would drop this patch for all of the stable kernel versions, it doesn't
>really fix any user reported issues.

Will do, thanks!

-- 
Thanks,
Sasha

[PATCH AUTOSEL 4.9 09/24] drm/bridge/analogix/anx78xx: Cleanup on error in anx78xx_bridge_attach()

[Sasha Levin]

From: Lyude Paul <lyude@redhat.com>

[ Upstream commit 212ee8db84600f7b279b8645c62a112bff310995 ]

Just another issue I noticed while correcting usages of
drm_dp_aux_init()/drm_dp_aux_register() around the tree. If any of the
steps in anx78xx_bridge_attach() fail, we end up leaking resources. So,
let's fix that (and fix leaking a DP AUX adapter in the process) by
unrolling on errors.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219215326.2227596-10-lyude@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/analogix-anx78xx.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.c b/drivers/gpu/drm/bridge/analogix-anx78xx.c
index 16babacb7cf0..5a1121af6664 100644
--- a/drivers/gpu/drm/bridge/analogix-anx78xx.c
+++ b/drivers/gpu/drm/bridge/analogix-anx78xx.c
@@ -1039,7 +1039,7 @@ static int anx78xx_bridge_attach(struct drm_bridge *bridge)
 				 DRM_MODE_CONNECTOR_DisplayPort);
 	if (err) {
 		DRM_ERROR("Failed to initialize connector: %d\n", err);
-		return err;
+		goto aux_unregister;
 	}
 
 	drm_connector_helper_add(&anx78xx->connector,
@@ -1051,16 +1051,21 @@ static int anx78xx_bridge_attach(struct drm_bridge *bridge)
 						bridge->encoder);
 	if (err) {
 		DRM_ERROR("Failed to link up connector to encoder: %d\n", err);
-		return err;
+		goto connector_cleanup;
 	}
 
 	err = drm_connector_register(&anx78xx->connector);
 	if (err) {
 		DRM_ERROR("Failed to register connector: %d\n", err);
-		return err;
+		goto connector_cleanup;
 	}
 
 	return 0;
+connector_cleanup:
+	drm_connector_cleanup(&anx78xx->connector);
+aux_unregister:
+	drm_dp_aux_unregister(&anx78xx->aux);
+	return err;
 }
 
 static bool anx78xx_bridge_mode_fixup(struct drm_bridge *bridge,
-- 
2.30.2

[PATCH AUTOSEL 4.9 09/24] drm/bridge/analogix/anx78xx: Cleanup on error in anx78xx_bridge_attach()

[Sasha Levin]

From: Lyude Paul <lyude@redhat.com>

[ Upstream commit 212ee8db84600f7b279b8645c62a112bff310995 ]

Just another issue I noticed while correcting usages of
drm_dp_aux_init()/drm_dp_aux_register() around the tree. If any of the
steps in anx78xx_bridge_attach() fail, we end up leaking resources. So,
let's fix that (and fix leaking a DP AUX adapter in the process) by
unrolling on errors.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219215326.2227596-10-lyude@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/analogix-anx78xx.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.c b/drivers/gpu/drm/bridge/analogix-anx78xx.c
index 16babacb7cf0..5a1121af6664 100644
--- a/drivers/gpu/drm/bridge/analogix-anx78xx.c
+++ b/drivers/gpu/drm/bridge/analogix-anx78xx.c
@@ -1039,7 +1039,7 @@ static int anx78xx_bridge_attach(struct drm_bridge *bridge)
 				 DRM_MODE_CONNECTOR_DisplayPort);
 	if (err) {
 		DRM_ERROR("Failed to initialize connector: %d\n", err);
-		return err;
+		goto aux_unregister;
 	}
 
 	drm_connector_helper_add(&anx78xx->connector,
@@ -1051,16 +1051,21 @@ static int anx78xx_bridge_attach(struct drm_bridge *bridge)
 						bridge->encoder);
 	if (err) {
 		DRM_ERROR("Failed to link up connector to encoder: %d\n", err);
-		return err;
+		goto connector_cleanup;
 	}
 
 	err = drm_connector_register(&anx78xx->connector);
 	if (err) {
 		DRM_ERROR("Failed to register connector: %d\n", err);
-		return err;
+		goto connector_cleanup;
 	}
 
 	return 0;
+connector_cleanup:
+	drm_connector_cleanup(&anx78xx->connector);
+aux_unregister:
+	drm_dp_aux_unregister(&anx78xx->aux);
+	return err;
 }
 
 static bool anx78xx_bridge_mode_fixup(struct drm_bridge *bridge,
-- 
2.30.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.9 10/24] scsi: qla2xxx: Always check the return value of qla24xx_get_isp_stats()

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit a2b2cc660822cae08c351c7f6b452bfd1330a4f7 ]

This patch fixes the following Coverity warning:

    CID 361199 (#1 of 1): Unchecked return value (CHECKED_RETURN)
    3. check_return: Calling qla24xx_get_isp_stats without checking return
    value (as is done elsewhere 4 out of 5 times).

Link: https://lore.kernel.org/r/20210320232359.941-7-bvanassche@acm.org
Cc: Quinn Tran <qutran@marvell.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: Lee Duncan <lduncan@suse.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_attr.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 33f4181ba9f7..591e2e89ae9f 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1909,6 +1909,8 @@ qla2x00_reset_host_stats(struct Scsi_Host *shost)
 	vha->qla_stats.jiffies_at_last_reset = get_jiffies_64();
 
 	if (IS_FWI2_CAPABLE(ha)) {
+		int rval;
+
 		stats = dma_alloc_coherent(&ha->pdev->dev,
 		    sizeof(*stats), &stats_dma, GFP_KERNEL);
 		if (!stats) {
@@ -1918,7 +1920,11 @@ qla2x00_reset_host_stats(struct Scsi_Host *shost)
 		}
 
 		/* reset firmware statistics */
-		qla24xx_get_isp_stats(base_vha, stats, stats_dma, BIT_0);
+		rval = qla24xx_get_isp_stats(base_vha, stats, stats_dma, BIT_0);
+		if (rval != QLA_SUCCESS)
+			ql_log(ql_log_warn, vha, 0x70de,
+			       "Resetting ISP statistics failed: rval = %d\n",
+			       rval);
 
 		dma_free_coherent(&ha->pdev->dev, sizeof(*stats),
 		    stats, stats_dma);
-- 
2.30.2

[PATCH AUTOSEL 4.9 11/24] scsi: scsi_dh_alua: Remove check for ASC 24h in alua_rtpg()

[Sasha Levin]

From: "Ewan D. Milne" <emilne@redhat.com>

[ Upstream commit bc3f2b42b70eb1b8576e753e7d0e117bbb674496 ]

Some arrays return ILLEGAL_REQUEST with ASC 00h if they don't support the
RTPG extended header so remove the check for INVALID FIELD IN CDB.

Link: https://lore.kernel.org/r/20210331201154.20348-1-emilne@redhat.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/device_handler/scsi_dh_alua.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index 2bc3dc6244a5..dce885276235 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -564,10 +564,11 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg)
 		 * even though it shouldn't according to T10.
 		 * The retry without rtpg_ext_hdr_req set
 		 * handles this.
+		 * Note:  some arrays return a sense key of ILLEGAL_REQUEST
+		 * with ASC 00h if they don't support the extended header.
 		 */
 		if (!(pg->flags & ALUA_RTPG_EXT_HDR_UNSUPP) &&
-		    sense_hdr.sense_key == ILLEGAL_REQUEST &&
-		    sense_hdr.asc == 0x24 && sense_hdr.ascq == 0) {
+		    sense_hdr.sense_key == ILLEGAL_REQUEST) {
 			pg->flags |= ALUA_RTPG_EXT_HDR_UNSUPP;
 			goto retry;
 		}
-- 
2.30.2

[PATCH AUTOSEL 4.9 12/24] media: em28xx: fix memory leak

[Sasha Levin]

From: Muhammad Usama Anjum <musamaanjum@gmail.com>

[ Upstream commit 0ae10a7dc8992ee682ff0b1752ff7c83d472eef1 ]

If some error occurs, URB buffers should also be freed. If they aren't
freed with the dvb here, the em28xx_dvb_fini call doesn't frees the URB
buffers as dvb is set to NULL. The function in which error occurs should
do all the cleanup for the allocations it had done.

Tested the patch with the reproducer provided by syzbot. This patch
fixes the memleak.

Reported-by: syzbot+889397c820fa56adf25d@syzkaller.appspotmail.com
Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/em28xx/em28xx-dvb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/usb/em28xx/em28xx-dvb.c b/drivers/media/usb/em28xx/em28xx-dvb.c
index b0aea48907b7..7e259be47252 100644
--- a/drivers/media/usb/em28xx/em28xx-dvb.c
+++ b/drivers/media/usb/em28xx/em28xx-dvb.c
@@ -1967,6 +1967,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
 	return result;
 
 out_free:
+	em28xx_uninit_usb_xfer(dev, EM28XX_DIGITAL_MODE);
 	kfree(dvb);
 	dev->dvb = NULL;
 	goto ret;
-- 
2.30.2

[PATCH AUTOSEL 4.9 13/24] clk: socfpga: arria10: Fix memory leak of socfpga_clk on error return

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 657d4d1934f75a2d978c3cf2086495eaa542e7a9 ]

There is an error return path that is not kfree'ing socfpga_clk leading
to a memory leak. Fix this by adding in the missing kfree call.

Addresses-Coverity: ("Resource leak")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210406170115.430990-1-colin.king@canonical.com
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/socfpga/clk-gate-a10.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/socfpga/clk-gate-a10.c b/drivers/clk/socfpga/clk-gate-a10.c
index c2d572748167..7913dbedba89 100644
--- a/drivers/clk/socfpga/clk-gate-a10.c
+++ b/drivers/clk/socfpga/clk-gate-a10.c
@@ -157,6 +157,7 @@ static void __init __socfpga_gate_init(struct device_node *node,
 		if (IS_ERR(socfpga_clk->sys_mgr_base_addr)) {
 			pr_err("%s: failed to find altr,sys-mgr regmap!\n",
 					__func__);
+			kfree(socfpga_clk);
 			return;
 		}
 	}
-- 
2.30.2

[PATCH AUTOSEL 4.9 14/24] power: supply: generic-adc-battery: fix possible use-after-free in gab_remove()

[Sasha Levin]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit b6cfa007b3b229771d9588970adb4ab3e0487f49 ]

This driver's remove path calls cancel_delayed_work(). However, that
function does not wait until the work function finishes. This means
that the callback function may still be running after the driver's
remove function has finished, which would result in a use-after-free.

Fix by calling cancel_delayed_work_sync(), which ensures that
the work is properly cancelled, no longer running, and unable
to re-schedule itself.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/generic-adc-battery.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/power/supply/generic-adc-battery.c b/drivers/power/supply/generic-adc-battery.c
index f627b39f64bf..b77fd751945d 100644
--- a/drivers/power/supply/generic-adc-battery.c
+++ b/drivers/power/supply/generic-adc-battery.c
@@ -384,7 +384,7 @@ static int gab_remove(struct platform_device *pdev)
 	}
 
 	kfree(adc_bat->psy_desc.properties);
-	cancel_delayed_work(&adc_bat->bat_work);
+	cancel_delayed_work_sync(&adc_bat->bat_work);
 	return 0;
 }
 
-- 
2.30.2

[PATCH AUTOSEL 4.9 15/24] power: supply: s3c_adc_battery: fix possible use-after-free in s3c_adc_bat_remove()

[Sasha Levin]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 68ae256945d2abe9036a7b68af4cc65aff79d5b7 ]

This driver's remove path calls cancel_delayed_work(). However, that
function does not wait until the work function finishes. This means
that the callback function may still be running after the driver's
remove function has finished, which would result in a use-after-free.

Fix by calling cancel_delayed_work_sync(), which ensures that
the work is properly cancelled, no longer running, and unable
to re-schedule itself.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/s3c_adc_battery.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/power/supply/s3c_adc_battery.c b/drivers/power/supply/s3c_adc_battery.c
index 0ffe5cd3abf6..06b412c43aa7 100644
--- a/drivers/power/supply/s3c_adc_battery.c
+++ b/drivers/power/supply/s3c_adc_battery.c
@@ -392,7 +392,7 @@ static int s3c_adc_bat_remove(struct platform_device *pdev)
 		gpio_free(pdata->gpio_charge_finished);
 	}
 
-	cancel_delayed_work(&bat_work);
+	cancel_delayed_work_sync(&bat_work);
 
 	if (pdata->exit)
 		pdata->exit();
-- 
2.30.2

[PATCH AUTOSEL 4.9 16/24] media: adv7604: fix possible use-after-free in adv76xx_remove()

[Sasha Levin]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit fa56f5f1fe31c2050675fa63b84963ebd504a5b3 ]

This driver's remove path calls cancel_delayed_work(). However, that
function does not wait until the work function finishes. This means
that the callback function may still be running after the driver's
remove function has finished, which would result in a use-after-free.

Fix by calling cancel_delayed_work_sync(), which ensures that
the work is properly cancelled, no longer running, and unable
to re-schedule itself.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/adv7604.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
index ce6f93074ae0..56b8b7bf759e 100644
--- a/drivers/media/i2c/adv7604.c
+++ b/drivers/media/i2c/adv7604.c
@@ -3541,7 +3541,7 @@ static int adv76xx_remove(struct i2c_client *client)
 	io_write(sd, 0x6e, 0);
 	io_write(sd, 0x73, 0);
 
-	cancel_delayed_work(&state->delayed_work_enable_hotplug);
+	cancel_delayed_work_sync(&state->delayed_work_enable_hotplug);
 	v4l2_async_unregister_subdev(sd);
 	media_entity_cleanup(&sd->entity);
 	adv76xx_unregister_clients(to_state(sd));
-- 
2.30.2

[PATCH AUTOSEL 4.9 17/24] media: i2c: adv7511-v4l2: fix possible use-after-free in adv7511_remove()

[Sasha Levin]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 2c9541720c66899adf6f3600984cf3ef151295ad ]

This driver's remove path calls cancel_delayed_work(). However, that
function does not wait until the work function finishes. This means
that the callback function may still be running after the driver's
remove function has finished, which would result in a use-after-free.

Fix by calling cancel_delayed_work_sync(), which ensures that
the work is properly cancelled, no longer running, and unable
to re-schedule itself.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/adv7511-v4l2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/i2c/adv7511-v4l2.c b/drivers/media/i2c/adv7511-v4l2.c
index b87c9e7ff146..e81c4cca50c6 100644
--- a/drivers/media/i2c/adv7511-v4l2.c
+++ b/drivers/media/i2c/adv7511-v4l2.c
@@ -1976,7 +1976,7 @@ static int adv7511_remove(struct i2c_client *client)
 
 	adv7511_set_isr(sd, false);
 	adv7511_init_setup(sd);
-	cancel_delayed_work(&state->edid_handler);
+	cancel_delayed_work_sync(&state->edid_handler);
 	i2c_unregister_device(state->i2c_edid);
 	if (state->i2c_cec)
 		i2c_unregister_device(state->i2c_cec);
-- 
2.30.2

[PATCH AUTOSEL 4.9 18/24] media: i2c: adv7842: fix possible use-after-free in adv7842_remove()

[Sasha Levin]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 4a15275b6a18597079f18241c87511406575179a ]

This driver's remove path calls cancel_delayed_work(). However, that
function does not wait until the work function finishes. This means
that the callback function may still be running after the driver's
remove function has finished, which would result in a use-after-free.

Fix by calling cancel_delayed_work_sync(), which ensures that
the work is properly cancelled, no longer running, and unable
to re-schedule itself.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/adv7842.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/i2c/adv7842.c b/drivers/media/i2c/adv7842.c
index cf3b42c9417e..d7af4fbcb84b 100644
--- a/drivers/media/i2c/adv7842.c
+++ b/drivers/media/i2c/adv7842.c
@@ -3598,7 +3598,7 @@ static int adv7842_remove(struct i2c_client *client)
 	struct adv7842_state *state = to_state(sd);
 
 	adv7842_irq_enable(sd, false);
-	cancel_delayed_work(&state->delayed_work_enable_hotplug);
+	cancel_delayed_work_sync(&state->delayed_work_enable_hotplug);
 	v4l2_device_unregister_subdev(sd);
 	media_entity_cleanup(&sd->entity);
 	adv7842_unregister_clients(sd);
-- 
2.30.2

[PATCH AUTOSEL 4.9 19/24] media: dvb-usb: fix memory leak in dvb_usb_adapter_init

[Sasha Levin]

From: Pavel Skripkin <paskripkin@gmail.com>

[ Upstream commit b7cd0da982e3043f2eec7235ac5530cb18d6af1d ]

syzbot reported memory leak in dvb-usb. The problem was
in invalid error handling in dvb_usb_adapter_init().

for (n = 0; n < d->props.num_adapters; n++) {
....
	if ((ret = dvb_usb_adapter_stream_init(adap)) ||
		(ret = dvb_usb_adapter_dvb_init(adap, adapter_nrs)) ||
		(ret = dvb_usb_adapter_frontend_init(adap))) {
		return ret;
	}
...
	d->num_adapters_initialized++;
...
}

In case of error in dvb_usb_adapter_dvb_init() or
dvb_usb_adapter_dvb_init() d->num_adapters_initialized won't be
incremented, but dvb_usb_adapter_exit() relies on it:

	for (n = 0; n < d->num_adapters_initialized; n++)

So, allocated objects won't be freed.

Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reported-by: syzbot+3c2be7424cea3b932b0e@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/dvb-usb/dvb-usb-init.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/media/usb/dvb-usb/dvb-usb-init.c b/drivers/media/usb/dvb-usb/dvb-usb-init.c
index b3413404f91a..690c1e06fbfa 100644
--- a/drivers/media/usb/dvb-usb/dvb-usb-init.c
+++ b/drivers/media/usb/dvb-usb/dvb-usb-init.c
@@ -82,11 +82,17 @@ static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs)
 			}
 		}
 
-		if ((ret = dvb_usb_adapter_stream_init(adap)) ||
-			(ret = dvb_usb_adapter_dvb_init(adap, adapter_nrs)) ||
-			(ret = dvb_usb_adapter_frontend_init(adap))) {
+		ret = dvb_usb_adapter_stream_init(adap);
+		if (ret)
 			return ret;
-		}
+
+		ret = dvb_usb_adapter_dvb_init(adap, adapter_nrs);
+		if (ret)
+			goto dvb_init_err;
+
+		ret = dvb_usb_adapter_frontend_init(adap);
+		if (ret)
+			goto frontend_init_err;
 
 		/* use exclusive FE lock if there is multiple shared FEs */
 		if (adap->fe_adap[1].fe)
@@ -106,6 +112,12 @@ static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs)
 	}
 
 	return 0;
+
+frontend_init_err:
+	dvb_usb_adapter_dvb_exit(adap);
+dvb_init_err:
+	dvb_usb_adapter_stream_exit(adap);
+	return ret;
 }
 
 static int dvb_usb_adapter_exit(struct dvb_usb_device *d)
-- 
2.30.2

[PATCH AUTOSEL 4.9 20/24] media: gscpa/stv06xx: fix memory leak

[Sasha Levin]

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit 4f4e6644cd876c844cdb3bea2dd7051787d5ae25 ]

For two of the supported sensors the stv06xx driver allocates memory which
is stored in sd->sensor_priv. This memory is freed on a disconnect, but if
the probe() fails, then it isn't freed and so this leaks memory.

Add a new probe_error() op that drivers can use to free any allocated
memory in case there was a probe failure.

Thanks to Pavel Skripkin <paskripkin@gmail.com> for discovering the cause
of the memory leak.

Reported-and-tested-by: syzbot+e7f4c64a4248a0340c37@syzkaller.appspotmail.com

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/gspca/gspca.c           | 2 ++
 drivers/media/usb/gspca/gspca.h           | 1 +
 drivers/media/usb/gspca/stv06xx/stv06xx.c | 9 +++++++++
 3 files changed, 12 insertions(+)

diff --git a/drivers/media/usb/gspca/gspca.c b/drivers/media/usb/gspca/gspca.c
index d239075a6a65..79f1e8904e30 100644
--- a/drivers/media/usb/gspca/gspca.c
+++ b/drivers/media/usb/gspca/gspca.c
@@ -2146,6 +2146,8 @@ int gspca_dev_probe2(struct usb_interface *intf,
 #endif
 	v4l2_ctrl_handler_free(gspca_dev->vdev.ctrl_handler);
 	v4l2_device_unregister(&gspca_dev->v4l2_dev);
+	if (sd_desc->probe_error)
+		sd_desc->probe_error(gspca_dev);
 	kfree(gspca_dev->usb_buf);
 	kfree(gspca_dev);
 	return ret;
diff --git a/drivers/media/usb/gspca/gspca.h b/drivers/media/usb/gspca/gspca.h
index d39adf90303b..bec8fccc2c94 100644
--- a/drivers/media/usb/gspca/gspca.h
+++ b/drivers/media/usb/gspca/gspca.h
@@ -101,6 +101,7 @@ struct sd_desc {
 	cam_cf_op config;	/* called on probe */
 	cam_op init;		/* called on probe and resume */
 	cam_op init_controls;	/* called on probe */
+	cam_v_op probe_error;	/* called if probe failed, do cleanup here */
 	cam_op start;		/* called on stream on after URBs creation */
 	cam_pkt_op pkt_scan;
 /* optional operations */
diff --git a/drivers/media/usb/gspca/stv06xx/stv06xx.c b/drivers/media/usb/gspca/stv06xx/stv06xx.c
index 7d255529ed4c..40d4c99debb8 100644
--- a/drivers/media/usb/gspca/stv06xx/stv06xx.c
+++ b/drivers/media/usb/gspca/stv06xx/stv06xx.c
@@ -541,12 +541,21 @@ static int sd_int_pkt_scan(struct gspca_dev *gspca_dev,
 static int stv06xx_config(struct gspca_dev *gspca_dev,
 			  const struct usb_device_id *id);
 
+static void stv06xx_probe_error(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *)gspca_dev;
+
+	kfree(sd->sensor_priv);
+	sd->sensor_priv = NULL;
+}
+
 /* sub-driver description */
 static const struct sd_desc sd_desc = {
 	.name = MODULE_NAME,
 	.config = stv06xx_config,
 	.init = stv06xx_init,
 	.init_controls = stv06xx_init_controls,
+	.probe_error = stv06xx_probe_error,
 	.start = stv06xx_start,
 	.stopN = stv06xx_stopN,
 	.pkt_scan = stv06xx_pkt_scan,
-- 
2.30.2

[PATCH AUTOSEL 4.9 21/24] drm/msm/mdp5: Configure PP_SYNC_HEIGHT to double the vtotal

[Sasha Levin]

From: Marijn Suijten <marijn.suijten@somainline.org>

[ Upstream commit 2ad52bdb220de5ab348098e3482b01235d15a842 ]

Leaving this at a close-to-maximum register value 0xFFF0 means it takes
very long for the MDSS to generate a software vsync interrupt when the
hardware TE interrupt doesn't arrive.  Configuring this to double the
vtotal (like some downstream kernels) leads to a frame to take at most
twice before the vsync signal, until hardware TE comes up.

In this case the hardware interrupt responsible for providing this
signal - "disp-te" gpio - is not hooked up to the mdp5 vsync/pp logic at
all.  This solves severe panel update issues observed on at least the
Xperia Loire and Tone series, until said gpio is properly hooked up to
an irq.

Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210406214726.131534-2-marijn.suijten@somainline.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/mdp/mdp5/mdp5_cmd_encoder.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cmd_encoder.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cmd_encoder.c
index c627ab6d0061..8ac54b9dcd39 100644
--- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cmd_encoder.c
+++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cmd_encoder.c
@@ -128,9 +128,17 @@ static int pingpong_tearcheck_setup(struct drm_encoder *encoder,
 		| MDP5_PP_SYNC_CONFIG_VSYNC_IN_EN;
 	cfg |= MDP5_PP_SYNC_CONFIG_VSYNC_COUNT(vclks_line);
 
+	/*
+	 * Tearcheck emits a blanking signal every vclks_line * vtotal * 2 ticks on
+	 * the vsync_clk equating to roughly half the desired panel refresh rate.
+	 * This is only necessary as stability fallback if interrupts from the
+	 * panel arrive too late or not at all, but is currently used by default
+	 * because these panel interrupts are not wired up yet.
+	 */
 	mdp5_write(mdp5_kms, REG_MDP5_PP_SYNC_CONFIG_VSYNC(pp_id), cfg);
 	mdp5_write(mdp5_kms,
-		REG_MDP5_PP_SYNC_CONFIG_HEIGHT(pp_id), 0xfff0);
+		REG_MDP5_PP_SYNC_CONFIG_HEIGHT(pp_id), (2 * mode->vtotal));
+
 	mdp5_write(mdp5_kms,
 		REG_MDP5_PP_VSYNC_INIT_VAL(pp_id), mode->vdisplay);
 	mdp5_write(mdp5_kms, REG_MDP5_PP_RD_PTR_IRQ(pp_id), mode->vdisplay + 1);
-- 
2.30.2

[PATCH AUTOSEL 4.9 21/24] drm/msm/mdp5: Configure PP_SYNC_HEIGHT to double the vtotal

[Sasha Levin]

From: Marijn Suijten <marijn.suijten@somainline.org>

[ Upstream commit 2ad52bdb220de5ab348098e3482b01235d15a842 ]

Leaving this at a close-to-maximum register value 0xFFF0 means it takes
very long for the MDSS to generate a software vsync interrupt when the
hardware TE interrupt doesn't arrive.  Configuring this to double the
vtotal (like some downstream kernels) leads to a frame to take at most
twice before the vsync signal, until hardware TE comes up.

In this case the hardware interrupt responsible for providing this
signal - "disp-te" gpio - is not hooked up to the mdp5 vsync/pp logic at
all.  This solves severe panel update issues observed on at least the
Xperia Loire and Tone series, until said gpio is properly hooked up to
an irq.

Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210406214726.131534-2-marijn.suijten@somainline.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/mdp/mdp5/mdp5_cmd_encoder.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cmd_encoder.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cmd_encoder.c
index c627ab6d0061..8ac54b9dcd39 100644
--- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cmd_encoder.c
+++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cmd_encoder.c
@@ -128,9 +128,17 @@ static int pingpong_tearcheck_setup(struct drm_encoder *encoder,
 		| MDP5_PP_SYNC_CONFIG_VSYNC_IN_EN;
 	cfg |= MDP5_PP_SYNC_CONFIG_VSYNC_COUNT(vclks_line);
 
+	/*
+	 * Tearcheck emits a blanking signal every vclks_line * vtotal * 2 ticks on
+	 * the vsync_clk equating to roughly half the desired panel refresh rate.
+	 * This is only necessary as stability fallback if interrupts from the
+	 * panel arrive too late or not at all, but is currently used by default
+	 * because these panel interrupts are not wired up yet.
+	 */
 	mdp5_write(mdp5_kms, REG_MDP5_PP_SYNC_CONFIG_VSYNC(pp_id), cfg);
 	mdp5_write(mdp5_kms,
-		REG_MDP5_PP_SYNC_CONFIG_HEIGHT(pp_id), 0xfff0);
+		REG_MDP5_PP_SYNC_CONFIG_HEIGHT(pp_id), (2 * mode->vtotal));
+
 	mdp5_write(mdp5_kms,
 		REG_MDP5_PP_VSYNC_INIT_VAL(pp_id), mode->vdisplay);
 	mdp5_write(mdp5_kms, REG_MDP5_PP_RD_PTR_IRQ(pp_id), mode->vdisplay + 1);
-- 
2.30.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.9 22/24] drm/amdgpu: fix NULL pointer dereference

[Sasha Levin]

From: Guchun Chen <guchun.chen@amd.com>

[ Upstream commit 3c3dc654333f6389803cdcaf03912e94173ae510 ]

ttm->sg needs to be checked before accessing its child member.

Call Trace:
 amdgpu_ttm_backend_destroy+0x12/0x70 [amdgpu]
 ttm_bo_cleanup_memtype_use+0x3a/0x60 [ttm]
 ttm_bo_release+0x17d/0x300 [ttm]
 amdgpu_bo_unref+0x1a/0x30 [amdgpu]
 amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x78b/0x8b0 [amdgpu]
 kfd_ioctl_alloc_memory_of_gpu+0x118/0x220 [amdgpu]
 kfd_ioctl+0x222/0x400 [amdgpu]
 ? kfd_dev_is_large_bar+0x90/0x90 [amdgpu]
 __x64_sys_ioctl+0x8e/0xd0
 ? __context_tracking_exit+0x52/0x90
 do_syscall_64+0x33/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f97f264d317
Code: b3 66 90 48 8b 05 71 4b 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 41 4b 2d 00 f7 d8 64 89 01 48
RSP: 002b:00007ffdb402c338 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f97f3cc63a0 RCX: 00007f97f264d317
RDX: 00007ffdb402c380 RSI: 00000000c0284b16 RDI: 0000000000000003
RBP: 00007ffdb402c380 R08: 00007ffdb402c428 R09: 00000000c4000004
R10: 00000000c4000004 R11: 0000000000000246 R12: 00000000c0284b16
R13: 0000000000000003 R14: 00007f97f3cc63a0 R15: 00007f8836200000

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
index 80c60a62d39e..7271e3f32d82 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
@@ -652,7 +652,7 @@ static void amdgpu_ttm_tt_unpin_userptr(struct ttm_tt *ttm)
 		DMA_BIDIRECTIONAL : DMA_TO_DEVICE;
 
 	/* double check that we don't free the table twice */
-	if (!ttm->sg->sgl)
+	if (!ttm->sg || !ttm->sg->sgl)
 		return;
 
 	/* free the sg table and pages again */
-- 
2.30.2

[PATCH AUTOSEL 4.9 22/24] drm/amdgpu: fix NULL pointer dereference

[Sasha Levin]

From: Guchun Chen <guchun.chen@amd.com>

[ Upstream commit 3c3dc654333f6389803cdcaf03912e94173ae510 ]

ttm->sg needs to be checked before accessing its child member.

Call Trace:
 amdgpu_ttm_backend_destroy+0x12/0x70 [amdgpu]
 ttm_bo_cleanup_memtype_use+0x3a/0x60 [ttm]
 ttm_bo_release+0x17d/0x300 [ttm]
 amdgpu_bo_unref+0x1a/0x30 [amdgpu]
 amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x78b/0x8b0 [amdgpu]
 kfd_ioctl_alloc_memory_of_gpu+0x118/0x220 [amdgpu]
 kfd_ioctl+0x222/0x400 [amdgpu]
 ? kfd_dev_is_large_bar+0x90/0x90 [amdgpu]
 __x64_sys_ioctl+0x8e/0xd0
 ? __context_tracking_exit+0x52/0x90
 do_syscall_64+0x33/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f97f264d317
Code: b3 66 90 48 8b 05 71 4b 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 41 4b 2d 00 f7 d8 64 89 01 48
RSP: 002b:00007ffdb402c338 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f97f3cc63a0 RCX: 00007f97f264d317
RDX: 00007ffdb402c380 RSI: 00000000c0284b16 RDI: 0000000000000003
RBP: 00007ffdb402c380 R08: 00007ffdb402c428 R09: 00000000c4000004
R10: 00000000c4000004 R11: 0000000000000246 R12: 00000000c0284b16
R13: 0000000000000003 R14: 00007f97f3cc63a0 R15: 00007f8836200000

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
index 80c60a62d39e..7271e3f32d82 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
@@ -652,7 +652,7 @@ static void amdgpu_ttm_tt_unpin_userptr(struct ttm_tt *ttm)
 		DMA_BIDIRECTIONAL : DMA_TO_DEVICE;
 
 	/* double check that we don't free the table twice */
-	if (!ttm->sg->sgl)
+	if (!ttm->sg || !ttm->sg->sgl)
 		return;
 
 	/* free the sg table and pages again */
-- 
2.30.2

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 4.9 22/24] drm/amdgpu: fix NULL pointer dereference

[Sasha Levin]

From: Guchun Chen <guchun.chen@amd.com>

[ Upstream commit 3c3dc654333f6389803cdcaf03912e94173ae510 ]

ttm->sg needs to be checked before accessing its child member.

Call Trace:
 amdgpu_ttm_backend_destroy+0x12/0x70 [amdgpu]
 ttm_bo_cleanup_memtype_use+0x3a/0x60 [ttm]
 ttm_bo_release+0x17d/0x300 [ttm]
 amdgpu_bo_unref+0x1a/0x30 [amdgpu]
 amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x78b/0x8b0 [amdgpu]
 kfd_ioctl_alloc_memory_of_gpu+0x118/0x220 [amdgpu]
 kfd_ioctl+0x222/0x400 [amdgpu]
 ? kfd_dev_is_large_bar+0x90/0x90 [amdgpu]
 __x64_sys_ioctl+0x8e/0xd0
 ? __context_tracking_exit+0x52/0x90
 do_syscall_64+0x33/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f97f264d317
Code: b3 66 90 48 8b 05 71 4b 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 41 4b 2d 00 f7 d8 64 89 01 48
RSP: 002b:00007ffdb402c338 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f97f3cc63a0 RCX: 00007f97f264d317
RDX: 00007ffdb402c380 RSI: 00000000c0284b16 RDI: 0000000000000003
RBP: 00007ffdb402c380 R08: 00007ffdb402c428 R09: 00000000c4000004
R10: 00000000c4000004 R11: 0000000000000246 R12: 00000000c0284b16
R13: 0000000000000003 R14: 00007f97f3cc63a0 R15: 00007f8836200000

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
index 80c60a62d39e..7271e3f32d82 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
@@ -652,7 +652,7 @@ static void amdgpu_ttm_tt_unpin_userptr(struct ttm_tt *ttm)
 		DMA_BIDIRECTIONAL : DMA_TO_DEVICE;
 
 	/* double check that we don't free the table twice */
-	if (!ttm->sg->sgl)
+	if (!ttm->sg || !ttm->sg->sgl)
 		return;
 
 	/* free the sg table and pages again */
-- 
2.30.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.9 23/24] scsi: lpfc: Fix crash when a REG_RPI mailbox fails triggering a LOGO response

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit fffd18ec6579c2d9c72b212169259062fe747888 ]

Fix a crash caused by a double put on the node when the driver completed an
ACC for an unsolicted abort on the same node.  The second put was executed
by lpfc_nlp_not_used() and is wrong because the completion routine executes
the nlp_put when the iocbq was released.  Additionally, the driver is
issuing a LOGO then immediately calls lpfc_nlp_set_state to put the node
into NPR.  This call does nothing.

Remove the lpfc_nlp_not_used call and additional set_state in the
completion routine.  Remove the lpfc_nlp_set_state post issue_logo.  Isn't
necessary.

Link: https://lore.kernel.org/r/20210412013127.2387-3-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_nportdisc.c | 2 --
 drivers/scsi/lpfc/lpfc_sli.c       | 1 -
 2 files changed, 3 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index fefef2884d59..30b5f65b29d1 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -1606,8 +1606,6 @@ lpfc_cmpl_reglogin_reglogin_issue(struct lpfc_vport *vport,
 		ndlp->nlp_last_elscmd = ELS_CMD_PLOGI;
 
 		lpfc_issue_els_logo(vport, ndlp, 0);
-		ndlp->nlp_prev_state = NLP_STE_REG_LOGIN_ISSUE;
-		lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
 		return ndlp->nlp_state;
 	}
 
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 08c76c361e8d..0e7915ecb85a 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -15252,7 +15252,6 @@ lpfc_sli4_seq_abort_rsp_cmpl(struct lpfc_hba *phba,
 	if (cmd_iocbq) {
 		ndlp = (struct lpfc_nodelist *)cmd_iocbq->context1;
 		lpfc_nlp_put(ndlp);
-		lpfc_nlp_not_used(ndlp);
 		lpfc_sli_release_iocbq(phba, cmd_iocbq);
 	}
 
-- 
2.30.2

[PATCH AUTOSEL 4.9 24/24] scsi: libfc: Fix a format specifier

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit 90d6697810f06aceea9de71ad836a8c7669789cd ]

Since the 'mfs' member has been declared as 'u32' in include/scsi/libfc.h,
use the %u format specifier instead of %hu. This patch fixes the following
clang compiler warning:

warning: format specifies type
      'unsigned short' but the argument has type 'u32' (aka 'unsigned int')
      [-Wformat]
                             "lport->mfs:%hu\n", mfs, lport->mfs);
                                         ~~~          ^~~~~~~~~~
                                         %u

Link: https://lore.kernel.org/r/20210415220826.29438-8-bvanassche@acm.org
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libfc/fc_lport.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index ae93f45f9cd8..a36817fb0673 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -1751,7 +1751,7 @@ void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp,
 
 	if (mfs < FC_SP_MIN_MAX_PAYLOAD || mfs > FC_SP_MAX_MAX_PAYLOAD) {
 		FC_LPORT_DBG(lport, "FLOGI bad mfs:%hu response, "
-			     "lport->mfs:%hu\n", mfs, lport->mfs);
+			     "lport->mfs:%u\n", mfs, lport->mfs);
 		fc_lport_error(lport, fp);
 		goto out;
 	}
-- 
2.30.2