From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> To: vkoul@kernel.org Cc: yung-chuan.liao@linux.intel.com, pierre-louis.bossart@linux.intel.com, sanyog.r.kale@intel.com, alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org, bjorn.andersson@linaro.org, amit.pundir@linaro.org, Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Subject: [PATCH] soundwire: qcom: fix handling of qcom,ports-block-pack-mode Date: Tue, 4 May 2021 13:59:09 +0100 [thread overview] Message-ID: <20210504125909.16108-1-srinivas.kandagatla@linaro.org> (raw) Support to "qcom,ports-block-pack-mode" was added at later stages to support a variant of Qualcomm SoundWire controllers available on Apps processor. However the older versions of the SoundWire controller which are embedded in WCD Codecs do not need this property. So returning on error for those cases will break boards like DragonBoard DB845c and Lenovo Yoga C630. This patch fixes error handling on this property considering older usecases. Fixes: 5943e4fb14e3 ("soundwire: qcom: check of_property_read status") Reported-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- drivers/soundwire/qcom.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index 2827085a323b..0ef79d60e88e 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -1150,8 +1150,16 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl) ret = of_property_read_u8_array(np, "qcom,ports-block-pack-mode", bp_mode, nports); - if (ret) - return ret; + if (ret) { + u32 version; + + ctrl->reg_read(ctrl, SWRM_COMP_HW_VERSION, &version); + + if (version <= 0x01030000) + memset(bp_mode, SWR_INVALID_PARAM, QCOM_SDW_MAX_PORTS); + else + return ret; + } memset(hstart, SWR_INVALID_PARAM, QCOM_SDW_MAX_PORTS); of_property_read_u8_array(np, "qcom,ports-hstart", hstart, nports); -- 2.21.0
WARNING: multiple messages have this Message-ID (diff)
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> To: vkoul@kernel.org Cc: amit.pundir@linaro.org, alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org, pierre-louis.bossart@linux.intel.com, bjorn.andersson@linaro.org, sanyog.r.kale@intel.com, yung-chuan.liao@linux.intel.com Subject: [PATCH] soundwire: qcom: fix handling of qcom,ports-block-pack-mode Date: Tue, 4 May 2021 13:59:09 +0100 [thread overview] Message-ID: <20210504125909.16108-1-srinivas.kandagatla@linaro.org> (raw) Support to "qcom,ports-block-pack-mode" was added at later stages to support a variant of Qualcomm SoundWire controllers available on Apps processor. However the older versions of the SoundWire controller which are embedded in WCD Codecs do not need this property. So returning on error for those cases will break boards like DragonBoard DB845c and Lenovo Yoga C630. This patch fixes error handling on this property considering older usecases. Fixes: 5943e4fb14e3 ("soundwire: qcom: check of_property_read status") Reported-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- drivers/soundwire/qcom.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index 2827085a323b..0ef79d60e88e 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -1150,8 +1150,16 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl) ret = of_property_read_u8_array(np, "qcom,ports-block-pack-mode", bp_mode, nports); - if (ret) - return ret; + if (ret) { + u32 version; + + ctrl->reg_read(ctrl, SWRM_COMP_HW_VERSION, &version); + + if (version <= 0x01030000) + memset(bp_mode, SWR_INVALID_PARAM, QCOM_SDW_MAX_PORTS); + else + return ret; + } memset(hstart, SWR_INVALID_PARAM, QCOM_SDW_MAX_PORTS); of_property_read_u8_array(np, "qcom,ports-hstart", hstart, nports); -- 2.21.0
next reply other threads:[~2021-05-04 12:59 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-05-04 12:59 Srinivas Kandagatla [this message] 2021-05-04 12:59 ` [PATCH] soundwire: qcom: fix handling of qcom,ports-block-pack-mode Srinivas Kandagatla 2021-05-04 13:28 ` Amit Pundir 2021-05-04 13:28 ` [PATCH] soundwire: qcom: fix handling of qcom, ports-block-pack-mode Amit Pundir 2021-05-11 11:18 ` [PATCH] soundwire: qcom: fix handling of qcom,ports-block-pack-mode Vinod Koul 2021-05-11 11:18 ` Vinod Koul
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210504125909.16108-1-srinivas.kandagatla@linaro.org \ --to=srinivas.kandagatla@linaro.org \ --cc=alsa-devel@alsa-project.org \ --cc=amit.pundir@linaro.org \ --cc=bjorn.andersson@linaro.org \ --cc=linux-kernel@vger.kernel.org \ --cc=pierre-louis.bossart@linux.intel.com \ --cc=sanyog.r.kale@intel.com \ --cc=vkoul@kernel.org \ --cc=yung-chuan.liao@linux.intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.