Re: [PATCH v2] iio: bme680_i2c: Remove ACPI support

[Jonathan Cameron <Jonathan.Cameron@Huawei.com>]

On Wed,  5 May 2021 20:43:32 -0700
Guenter Roeck <linux@roeck-us.net> wrote:

> With CONFIG_ACPI=n and -Werror, 0-day reports:
> 
> drivers/iio/chemical/bme680_i2c.c:46:36: error:
> 	'bme680_acpi_match' defined but not used
> 
> Apparently BME0680 is not a valid ACPI ID. Remove it and with it
> ACPI support from the bme680_i2c driver.
> 
> Reported-by: kernel test robot <lkp@intel.com>
> Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
> Cc: Hans de Goede <hdegoede@redhat.com>
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>

A note for these is that I'll change the patch titles when applying.
We aren't removing ACPI support from the drivers, we are simply
removing the ACPI ID table entries.  For most of these PRP0001 magic
will work just fine with the OF table.  That's probably the
right way for small companies etc to use these in products without
having to jump through the hoops of getting an ACPI ID.

Jonathan

> ---
> v2: Instead of making bme680_acpi_match conditional,
>     remove ACPI support entirely since the ACPI ID is
>     not valid.
> 
>  drivers/iio/chemical/bme680_i2c.c | 8 --------
>  1 file changed, 8 deletions(-)
> 
> diff --git a/drivers/iio/chemical/bme680_i2c.c b/drivers/iio/chemical/bme680_i2c.c
> index 29c0dfa4702b..74cf89c82c0a 100644
> --- a/drivers/iio/chemical/bme680_i2c.c
> +++ b/drivers/iio/chemical/bme680_i2c.c
> @@ -11,7 +11,6 @@
>   * Note: SDO pin cannot be left floating otherwise I2C address
>   *	 will be undefined.
>   */
> -#include <linux/acpi.h>
>  #include <linux/i2c.h>
>  #include <linux/module.h>
>  #include <linux/regmap.h>
> @@ -42,12 +41,6 @@ static const struct i2c_device_id bme680_i2c_id[] = {
>  };
>  MODULE_DEVICE_TABLE(i2c, bme680_i2c_id);
>  
> -static const struct acpi_device_id bme680_acpi_match[] = {
> -	{"BME0680", 0},
> -	{},
> -};
> -MODULE_DEVICE_TABLE(acpi, bme680_acpi_match);
> -
>  static const struct of_device_id bme680_of_i2c_match[] = {
>  	{ .compatible = "bosch,bme680", },
>  	{},
> @@ -57,7 +50,6 @@ MODULE_DEVICE_TABLE(of, bme680_of_i2c_match);
>  static struct i2c_driver bme680_i2c_driver = {
>  	.driver = {
>  		.name			= "bme680_i2c",
> -		.acpi_match_table       = ACPI_PTR(bme680_acpi_match),
>  		.of_match_table		= bme680_of_i2c_match,
>  	},
>  	.probe = bme680_i2c_probe,