[PATCH 0/3] can: c_can: cache frames to operate as a true FIFO

[PATCH 0/3] can: c_can: cache frames to operate as a true FIFO

[Dario Binacchi]

Performance tests of the c_can driver led to the patch that gives the
series its name. We have also added a patch for ethtool support and a
patch to remove a variable that is no longer used.


Dario Binacchi (3):
  can: c_can: remove the rxmasked unused variable
  can: c_can: add ethtool support
  can: c_can: cache frames to operate as a true FIFO

 drivers/net/can/c_can/Makefile                |  3 +
 drivers/net/can/c_can/c_can.h                 |  6 +-
 drivers/net/can/c_can/c_can_ethtool.c         | 46 +++++++++++++
 .../net/can/c_can/{c_can.c => c_can_main.c}   | 65 +++++++++++++++----
 4 files changed, 107 insertions(+), 13 deletions(-)
 create mode 100644 drivers/net/can/c_can/c_can_ethtool.c
 rename drivers/net/can/c_can/{c_can.c => c_can_main.c} (95%)

-- 
2.17.1

[PATCH 1/3] can: c_can: remove the rxmasked unused variable

[Dario Binacchi]

Initialized by c_can_chip_config() it's never used.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
---

 drivers/net/can/c_can/c_can.c | 1 -
 drivers/net/can/c_can/c_can.h | 1 -
 2 files changed, 2 deletions(-)

diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 313793f6922d..1fa47968c2ec 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -599,7 +599,6 @@ static int c_can_chip_config(struct net_device *dev)
 
 	/* Clear all internal status */
 	atomic_set(&priv->tx_active, 0);
-	priv->rxmasked = 0;
 	priv->tx_dir = 0;
 
 	/* set bittiming params */
diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
index 06045f610f0e..517845c4571e 100644
--- a/drivers/net/can/c_can/c_can.h
+++ b/drivers/net/can/c_can/c_can.h
@@ -205,7 +205,6 @@ struct c_can_priv {
 	struct c_can_raminit raminit_sys;	/* RAMINIT via syscon regmap */
 	void (*raminit)(const struct c_can_priv *priv, bool enable);
 	u32 comm_rcv_high;
-	u32 rxmasked;
 	u32 dlc[];
 };
 
-- 
2.17.1

Re: [PATCH 1/3] can: c_can: remove the rxmasked unused variable

[Marc Kleine-Budde]

[-- Attachment #1: Type: text/plain, Size: 485 bytes --]

On 09.05.2021 14:43:07, Dario Binacchi wrote:
> Initialized by c_can_chip_config() it's never used.
> 
> Signed-off-by: Dario Binacchi <dariobin@libero.it>

applied to linux-can-next/testing

thanks,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH 2/3] can: c_can: add ethtool support

[Dario Binacchi]

With commit 132f2d45fb23 ("can: c_can: add support to 64 message objects")
the number of message objects used for reception / transmission depends
on FIFO size.
The ethtools API support allows you to retrieve this info. Driver info
has been added too.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
---

 drivers/net/can/c_can/Makefile                |  3 ++
 drivers/net/can/c_can/c_can.h                 |  2 +
 drivers/net/can/c_can/c_can_ethtool.c         | 46 +++++++++++++++++++
 .../net/can/c_can/{c_can.c => c_can_main.c}   |  1 +
 4 files changed, 52 insertions(+)
 create mode 100644 drivers/net/can/c_can/c_can_ethtool.c
 rename drivers/net/can/c_can/{c_can.c => c_can_main.c} (99%)

diff --git a/drivers/net/can/c_can/Makefile b/drivers/net/can/c_can/Makefile
index e6a94c948531..ac2bca39d6ff 100644
--- a/drivers/net/can/c_can/Makefile
+++ b/drivers/net/can/c_can/Makefile
@@ -4,5 +4,8 @@
 #
 
 obj-$(CONFIG_CAN_C_CAN) += c_can.o
+
+c_can-objs := c_can_main.o c_can_ethtool.o
+
 obj-$(CONFIG_CAN_C_CAN_PLATFORM) += c_can_platform.o
 obj-$(CONFIG_CAN_C_CAN_PCI) += c_can_pci.o
diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
index 517845c4571e..4247ff80a29c 100644
--- a/drivers/net/can/c_can/c_can.h
+++ b/drivers/net/can/c_can/c_can.h
@@ -218,4 +218,6 @@ int c_can_power_up(struct net_device *dev);
 int c_can_power_down(struct net_device *dev);
 #endif
 
+void c_can_set_ethtool_ops(struct net_device *dev);
+
 #endif /* C_CAN_H */
diff --git a/drivers/net/can/c_can/c_can_ethtool.c b/drivers/net/can/c_can/c_can_ethtool.c
new file mode 100644
index 000000000000..1987c78b9647
--- /dev/null
+++ b/drivers/net/can/c_can/c_can_ethtool.c
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2021, Dario Binacchi <dariobin@libero.it>
+ */
+
+#include <linux/ethtool.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/netdevice.h>
+#include <linux/can/dev.h>
+
+#include "c_can.h"
+
+static void c_can_get_drvinfo(struct net_device *netdev,
+			      struct ethtool_drvinfo *info)
+{
+	struct c_can_priv *priv = netdev_priv(netdev);
+	struct platform_device	*pdev = to_platform_device(priv->device);
+
+	strscpy(info->driver, "c_can", sizeof(info->driver));
+	strscpy(info->version, "1.0", sizeof(info->version));
+	strscpy(info->bus_info, pdev->name, sizeof(info->bus_info));
+}
+
+static void c_can_get_channels(struct net_device *netdev,
+			       struct ethtool_channels *ch)
+{
+	struct c_can_priv *priv = netdev_priv(netdev);
+
+	ch->max_rx = priv->msg_obj_num;
+	ch->max_tx = priv->msg_obj_num;
+	ch->max_combined = priv->msg_obj_num;
+	ch->rx_count = priv->msg_obj_rx_num;
+	ch->tx_count = priv->msg_obj_tx_num;
+	ch->combined_count = priv->msg_obj_rx_num + priv->msg_obj_tx_num;
+}
+
+static const struct ethtool_ops c_can_ethtool_ops = {
+	.get_drvinfo = c_can_get_drvinfo,
+	.get_channels = c_can_get_channels,
+};
+
+void c_can_set_ethtool_ops(struct net_device *netdev)
+{
+	netdev->ethtool_ops = &c_can_ethtool_ops;
+}
diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can_main.c
similarity index 99%
rename from drivers/net/can/c_can/c_can.c
rename to drivers/net/can/c_can/c_can_main.c
index 1fa47968c2ec..7588f70ca0fe 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can_main.c
@@ -1334,6 +1334,7 @@ int register_c_can_dev(struct net_device *dev)
 
 	dev->flags |= IFF_ECHO;	/* we support local echo */
 	dev->netdev_ops = &c_can_netdev_ops;
+	c_can_set_ethtool_ops(dev);
 
 	err = register_candev(dev);
 	if (!err)
-- 
2.17.1

Re: [PATCH 2/3] can: c_can: add ethtool support

[Marc Kleine-Budde]

[-- Attachment #1: Type: text/plain, Size: 903 bytes --]

On 09.05.2021 14:43:08, Dario Binacchi wrote:
> With commit 132f2d45fb23 ("can: c_can: add support to 64 message objects")
> the number of message objects used for reception / transmission depends
> on FIFO size.
> The ethtools API support allows you to retrieve this info. Driver info
> has been added too.

> +static const struct ethtool_ops c_can_ethtool_ops = {
> +	.get_drvinfo = c_can_get_drvinfo,
> +	.get_channels = c_can_get_channels,
> +};

I think you're filling the wrong information here. I think channels is
for independent RX/TX channels. I think you want to implement
get_ringparam.

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH 3/3] can: c_can: cache frames to operate as a true FIFO

[Dario Binacchi]

As reported by a comment in the c_can_start_xmit() this was not a FIFO.
C/D_CAN controller sends out the buffers prioritized so that the lowest
buffer number wins.

What did c_can_start_xmit() do if it found tx_active = 0x80000000 ? It
waited until the only frame of the FIFO was actually transmitted by the
controller. Only one message in the FIFO but we had to wait for it to
empty completely to ensure that the messages were transmitted in the
order in which they were loaded.

By storing the frames in the FIFO without requiring its transmission, we
will be able to use the full size of the FIFO even in cases such as the
one described above. The transmission interrupt will trigger their
transmission only when all the messages previously loaded but stored in
less priority positions of the buffers have been transmitted.

Suggested-by: Gianluca Falavigna <gianluca.falavigna@inwind.it>
Signed-off-by: Dario Binacchi <dariobin@libero.it>


---

 drivers/net/can/c_can/c_can.h      |  3 ++
 drivers/net/can/c_can/c_can_main.c | 63 ++++++++++++++++++++++++------
 2 files changed, 55 insertions(+), 11 deletions(-)

diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
index 4247ff80a29c..6abde6cbc0b1 100644
--- a/drivers/net/can/c_can/c_can.h
+++ b/drivers/net/can/c_can/c_can.h
@@ -191,6 +191,9 @@ struct c_can_priv {
 	unsigned int msg_obj_tx_last;
 	u32 msg_obj_rx_mask;
 	atomic_t tx_active;
+	atomic_t tx_cached;
+	spinlock_t tx_cached_lock;
+	atomic_t tx_avail;
 	atomic_t sie_pending;
 	unsigned long tx_dir;
 	int last_status;
diff --git a/drivers/net/can/c_can/c_can_main.c b/drivers/net/can/c_can/c_can_main.c
index 7588f70ca0fe..d2f44c07d47f 100644
--- a/drivers/net/can/c_can/c_can_main.c
+++ b/drivers/net/can/c_can/c_can_main.c
@@ -124,6 +124,9 @@
 				 IF_COMM_TXRQST |		 \
 				 IF_COMM_DATAA | IF_COMM_DATAB)
 
+#define IF_COMM_TX_FRAME	(IF_COMM_ARB | IF_COMM_CONTROL | \
+				 IF_COMM_DATAA | IF_COMM_DATAB)
+
 /* For the low buffers we clear the interrupt bit, but keep newdat */
 #define IF_COMM_RCV_LOW		(IF_COMM_MASK | IF_COMM_ARB | \
 				 IF_COMM_CONTROL | IF_COMM_CLR_INT_PND | \
@@ -432,19 +435,36 @@ static netdev_tx_t c_can_start_xmit(struct sk_buff *skb,
 {
 	struct can_frame *frame = (struct can_frame *)skb->data;
 	struct c_can_priv *priv = netdev_priv(dev);
-	u32 idx, obj;
+	u32 idx, obj, tx_active, tx_cached;
 
 	if (can_dropped_invalid_skb(dev, skb))
 		return NETDEV_TX_OK;
-	/* This is not a FIFO. C/D_CAN sends out the buffers
-	 * prioritized. The lowest buffer number wins.
-	 */
-	idx = fls(atomic_read(&priv->tx_active));
-	obj = idx + priv->msg_obj_tx_first;
 
-	/* If this is the last buffer, stop the xmit queue */
-	if (idx == priv->msg_obj_tx_num - 1)
+	if (atomic_read(&priv->tx_avail) == 0)
 		netif_stop_queue(dev);
+
+	tx_active = atomic_read(&priv->tx_active);
+	tx_cached = atomic_read(&priv->tx_cached);
+	idx = fls(tx_active);
+	if (idx > priv->msg_obj_tx_num - 1) {
+		idx = fls(tx_cached);
+
+		obj = idx + priv->msg_obj_tx_first;
+		spin_lock_bh(&priv->tx_cached_lock);
+		/* prepare message object for transmission */
+		c_can_setup_tx_object(dev, IF_TX, frame, idx);
+		/* Store the message but don't ask for its transmission */
+		c_can_object_put(dev, IF_TX, obj, IF_COMM_TX_FRAME);
+		spin_unlock_bh(&priv->tx_cached_lock);
+		priv->dlc[idx] = frame->len;
+		can_put_echo_skb(skb, dev, idx, 0);
+		atomic_dec(&priv->tx_avail);
+		atomic_add(BIT(idx), &priv->tx_cached);
+		return NETDEV_TX_OK;
+	}
+
+	obj = idx + priv->msg_obj_tx_first;
+
 	/* Store the message in the interface so we can call
 	 * can_put_echo_skb(). We must do this before we enable
 	 * transmit as we might race against do_tx().
@@ -453,6 +473,7 @@ static netdev_tx_t c_can_start_xmit(struct sk_buff *skb,
 	priv->dlc[idx] = frame->len;
 	can_put_echo_skb(skb, dev, idx, 0);
 
+	atomic_dec(&priv->tx_avail);
 	/* Update the active bits */
 	atomic_add(BIT(idx), &priv->tx_active);
 	/* Start transmission */
@@ -599,6 +620,8 @@ static int c_can_chip_config(struct net_device *dev)
 
 	/* Clear all internal status */
 	atomic_set(&priv->tx_active, 0);
+	atomic_set(&priv->tx_cached, 0);
+	atomic_set(&priv->tx_avail, priv->msg_obj_tx_num);
 	priv->tx_dir = 0;
 
 	/* set bittiming params */
@@ -723,14 +746,31 @@ static void c_can_do_tx(struct net_device *dev)
 	/* Clear the bits in the tx_active mask */
 	atomic_sub(clr, &priv->tx_active);
 
-	if (clr & BIT(priv->msg_obj_tx_num - 1))
-		netif_wake_queue(dev);
-
 	if (pkts) {
+		atomic_add(pkts, &priv->tx_avail);
+
+		if (netif_queue_stopped(dev))
+			netif_wake_queue(dev);
+
 		stats->tx_bytes += bytes;
 		stats->tx_packets += pkts;
 		can_led_event(dev, CAN_LED_EVENT_TX);
 	}
+
+	if (atomic_read(&priv->tx_active) == 0) {
+		pend = atomic_read(&priv->tx_cached);
+
+		clr = pend;
+		while ((idx = ffs(pend))) {
+			idx--;
+			pend &= ~(1 << idx);
+
+			obj = idx + priv->msg_obj_tx_first;
+			c_can_object_put(dev, IF_TX, obj, IF_COMM_TXRQST);
+		}
+		atomic_sub(clr, &priv->tx_cached);
+		atomic_add(clr, &priv->tx_active);
+	}
 }
 
 /* If we have a gap in the pending bits, that means we either
@@ -1193,6 +1233,7 @@ struct net_device *alloc_c_can_dev(int msg_obj_num)
 		return NULL;
 
 	priv = netdev_priv(dev);
+	spin_lock_init(&priv->tx_cached_lock);
 	priv->msg_obj_num = msg_obj_num;
 	priv->msg_obj_rx_num = msg_obj_num - msg_obj_tx_num;
 	priv->msg_obj_rx_first = 1;
-- 
2.17.1

Re: [PATCH 3/3] can: c_can: cache frames to operate as a true FIFO

[Marc Kleine-Budde]

[-- Attachment #1: Type: text/plain, Size: 2095 bytes --]

On 09.05.2021 14:43:09, Dario Binacchi wrote:
> As reported by a comment in the c_can_start_xmit() this was not a FIFO.
> C/D_CAN controller sends out the buffers prioritized so that the lowest
> buffer number wins.
> 
> What did c_can_start_xmit() do if it found tx_active = 0x80000000 ? It
> waited until the only frame of the FIFO was actually transmitted by the
> controller. Only one message in the FIFO but we had to wait for it to
> empty completely to ensure that the messages were transmitted in the
> order in which they were loaded.
> 
> By storing the frames in the FIFO without requiring its transmission, we
> will be able to use the full size of the FIFO even in cases such as the
> one described above. The transmission interrupt will trigger their
> transmission only when all the messages previously loaded but stored in
> less priority positions of the buffers have been transmitted.

The algorithm you implemented looks a bit too complicated to me. Let me
sketch the algorithm that's implemented by several other drivers.

- have a power of two number of TX objects
- add a number of objects to struct priv (tx_num)
  (or make it a define, if the number of tx objects is compile time fixed)
- add two "unsigned int" variables to your struct priv,
  one "tx_head", one "tx_tail"
- the hard_start_xmit() writes to priv->tx_head & (priv->tx_num - 1)
- increment tx_head
- stop the tx_queue if there is no space or if the object with the
  lowest prio has been written
- in TX complete IRQ, handle priv->tx_tail object
- increment tx_tail
- wake queue if there is space but don't wake if we wait for the lowest
  prio object to be TX completed.

Special care needs to be taken to implement that lock-less and race
free. I suggest to look the the mcp251xfd driver.

Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 3/3] can: c_can: cache frames to operate as a true FIFO

[Marc Kleine-Budde]

[-- Attachment #1: Type: text/plain, Size: 2369 bytes --]

On 10.05.2021 14:25:15, Marc Kleine-Budde wrote:
> On 09.05.2021 14:43:09, Dario Binacchi wrote:
> > As reported by a comment in the c_can_start_xmit() this was not a FIFO.
> > C/D_CAN controller sends out the buffers prioritized so that the lowest
> > buffer number wins.
> > 
> > What did c_can_start_xmit() do if it found tx_active = 0x80000000 ? It
> > waited until the only frame of the FIFO was actually transmitted by the
> > controller. Only one message in the FIFO but we had to wait for it to
> > empty completely to ensure that the messages were transmitted in the
> > order in which they were loaded.
> > 
> > By storing the frames in the FIFO without requiring its transmission, we
> > will be able to use the full size of the FIFO even in cases such as the
> > one described above. The transmission interrupt will trigger their
> > transmission only when all the messages previously loaded but stored in
> > less priority positions of the buffers have been transmitted.
> 
> The algorithm you implemented looks a bit too complicated to me. Let me
> sketch the algorithm that's implemented by several other drivers.
> 
> - have a power of two number of TX objects
> - add a number of objects to struct priv (tx_num)
>   (or make it a define, if the number of tx objects is compile time fixed)
> - add two "unsigned int" variables to your struct priv,
>   one "tx_head", one "tx_tail"
> - the hard_start_xmit() writes to priv->tx_head & (priv->tx_num - 1)
> - increment tx_head
> - stop the tx_queue if there is no space or if the object with the
>   lowest prio has been written
> - in TX complete IRQ, handle priv->tx_tail object
> - increment tx_tail
> - wake queue if there is space but don't wake if we wait for the lowest
>   prio object to be TX completed.
> 
> Special care needs to be taken to implement that lock-less and race
> free. I suggest to look the the mcp251xfd driver.

After converting the driver to the above outlined implementation it
should be more straight forward to add the caching you implemented.  

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 3/3] can: c_can: cache frames to operate as a true FIFO

[Dario Binacchi]

Hi Marc,

> Il 10/05/2021 14:36 Marc Kleine-Budde <mkl@pengutronix.de> ha scritto:
> 
>  
> On 10.05.2021 14:25:15, Marc Kleine-Budde wrote:
> > On 09.05.2021 14:43:09, Dario Binacchi wrote:
> > > As reported by a comment in the c_can_start_xmit() this was not a FIFO.
> > > C/D_CAN controller sends out the buffers prioritized so that the lowest
> > > buffer number wins.
> > > 
> > > What did c_can_start_xmit() do if it found tx_active = 0x80000000 ? It
> > > waited until the only frame of the FIFO was actually transmitted by the
> > > controller. Only one message in the FIFO but we had to wait for it to
> > > empty completely to ensure that the messages were transmitted in the
> > > order in which they were loaded.
> > > 
> > > By storing the frames in the FIFO without requiring its transmission, we
> > > will be able to use the full size of the FIFO even in cases such as the
> > > one described above. The transmission interrupt will trigger their
> > > transmission only when all the messages previously loaded but stored in
> > > less priority positions of the buffers have been transmitted.
> > 
> > The algorithm you implemented looks a bit too complicated to me. Let me
> > sketch the algorithm that's implemented by several other drivers.
> > 
> > - have a power of two number of TX objects
> > - add a number of objects to struct priv (tx_num)
> >   (or make it a define, if the number of tx objects is compile time fixed)
> > - add two "unsigned int" variables to your struct priv,
> >   one "tx_head", one "tx_tail"
> > - the hard_start_xmit() writes to priv->tx_head & (priv->tx_num - 1)
> > - increment tx_head
> > - stop the tx_queue if there is no space or if the object with the
> >   lowest prio has been written
> > - in TX complete IRQ, handle priv->tx_tail object
> > - increment tx_tail
> > - wake queue if there is space but don't wake if we wait for the lowest
> >   prio object to be TX completed.
> > 
> > Special care needs to be taken to implement that lock-less and race
> > free. I suggest to look the the mcp251xfd driver.
> 
> After converting the driver to the above outlined implementation it
> should be more straight forward to add the caching you implemented.  
> 

I took some time to think about your suggestions.
The submitted patch was developed trying to improve the
CAN transmission using the current driver design for minimize
the creation of bugs.
If I'm not missing something you suggest me to change the
driver design as a pre-condition to apply an updated version
of my patch. IMHO this would increase the possibility of generating
bugs, even for parts of the code that are considered stable.
If the algorithm I have implemented is a bit too complicated,
let's try to simplify it starting from the submitted patch.

Waiting for your reply, thanks and regards
Dario

> regards,
> Marc
> 
> -- 
> Pengutronix e.K.                 | Marc Kleine-Budde           |
> Embedded Linux                   | https://www.pengutronix.de  |
> Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
> Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

[PATCH 0/3] can: c_can: cache frames to operate as a true FIFO

[Dario Binacchi]

Performance tests of the c_can driver led to the patch that gives the
series its name.


Dario Binacchi (3):
  can: c_can: exit c_can_do_tx() early if no frames have been sent
  can: c_can: support tx ring algorithm
  can: c_can: cache frames to operate as a true FIFO

 drivers/net/can/c_can/c_can.c | 100 ++++++++++++++++++++++++++--------
 drivers/net/can/c_can/c_can.h |  25 ++++++++-
 2 files changed, 101 insertions(+), 24 deletions(-)

-- 
2.17.1

[PATCH 3/3] can: c_can: cache frames to operate as a true FIFO

[Dario Binacchi]

As reported by a comment in the c_can_start_xmit() this was not a FIFO.
C/D_CAN controller sends out the buffers prioritized so that the lowest
buffer number wins.

What did c_can_start_xmit() do if head was less tail in the tx ring ? It
waited until all the frames queued in the FIFO was actually transmitted
by the controller before accepting a new CAN frame to transmit, even if
the FIFO was not full, to ensure that the messages were transmitted in
the order in which they were loaded.

By storing the frames in the FIFO without requiring its transmission, we
will be able to use the full size of the FIFO even in cases such as the
one described above. The transmission interrupt will trigger their
transmission only when all the messages previously loaded but stored in
less priority positions of the buffers have been transmitted.

Suggested-by: Gianluca Falavigna <gianluca.falavigna@inwind.it>
Signed-off-by: Dario Binacchi <dariobin@libero.it>

---

 drivers/net/can/c_can/c_can.c | 42 ++++++++++++++++++++---------------
 drivers/net/can/c_can/c_can.h |  6 +++++
 2 files changed, 30 insertions(+), 18 deletions(-)

diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 0548485f522d..9b809ea61094 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -427,20 +427,6 @@ static void c_can_setup_receive_object(struct net_device *dev, int iface,
 	c_can_object_put(dev, iface, obj, IF_COMM_RCV_SETUP);
 }
 
-static u8 c_can_get_tx_free(const struct c_can_tx_ring *ring)
-{
-	u8 head = c_can_get_tx_head(ring);
-	u8 tail = c_can_get_tx_tail(ring);
-
-	/* This is not a FIFO. C/D_CAN sends out the buffers
-	 * prioritized. The lowest buffer number wins.
-	 */
-	if (head < tail)
-		return 0;
-
-	return ring->obj_num - head;
-}
-
 static bool c_can_tx_busy(const struct c_can_priv *priv,
 			  const struct c_can_tx_ring *tx_ring)
 {
@@ -470,7 +456,7 @@ static netdev_tx_t c_can_start_xmit(struct sk_buff *skb,
 	struct can_frame *frame = (struct can_frame *)skb->data;
 	struct c_can_priv *priv = netdev_priv(dev);
 	struct c_can_tx_ring *tx_ring = &priv->tx;
-	u32 idx, obj;
+	u32 idx, obj, cmd = IF_COMM_TX;
 
 	if (can_dropped_invalid_skb(dev, skb))
 		return NETDEV_TX_OK;
@@ -483,7 +469,11 @@ static netdev_tx_t c_can_start_xmit(struct sk_buff *skb,
 	if (c_can_get_tx_free(tx_ring) == 0)
 		netif_stop_queue(dev);
 
-	obj = idx + priv->msg_obj_tx_first;
+	spin_lock_bh(&priv->tx_lock);
+	if (idx < c_can_get_tx_tail(tx_ring))
+		cmd &= ~IF_COMM_TXRQST; /* Cache the message */
+	else
+		spin_unlock_bh(&priv->tx_lock);
 
 	/* Store the message in the interface so we can call
 	 * can_put_echo_skb(). We must do this before we enable
@@ -492,9 +482,11 @@ static netdev_tx_t c_can_start_xmit(struct sk_buff *skb,
 	c_can_setup_tx_object(dev, IF_TX, frame, idx);
 	priv->dlc[idx] = frame->len;
 	can_put_echo_skb(skb, dev, idx, 0);
+	obj = idx + priv->msg_obj_tx_first;
+	c_can_object_put(dev, IF_TX, obj, cmd);
 
-	/* Start transmission */
-	c_can_object_put(dev, IF_TX, obj, IF_COMM_TX);
+	if (spin_is_locked(&priv->tx_lock))
+		spin_unlock_bh(&priv->tx_lock);
 
 	return NETDEV_TX_OK;
 }
@@ -740,6 +732,7 @@ static void c_can_do_tx(struct net_device *dev)
 	struct c_can_tx_ring *tx_ring = &priv->tx;
 	struct net_device_stats *stats = &dev->stats;
 	u32 idx, obj, pkts = 0, bytes = 0, pend;
+	u8 tail;
 
 	if (priv->msg_obj_tx_last > 32)
 		pend = priv->read_reg32(priv, C_CAN_INTPND3_REG);
@@ -776,6 +769,18 @@ static void c_can_do_tx(struct net_device *dev)
 	stats->tx_bytes += bytes;
 	stats->tx_packets += pkts;
 	can_led_event(dev, CAN_LED_EVENT_TX);
+
+	tail = c_can_get_tx_tail(tx_ring);
+
+	if (tail == 0) {
+		u8 head = c_can_get_tx_head(tx_ring);
+
+		/* Start transmission for all cached messages */
+		for (idx = tail; idx < head; idx++) {
+			obj = idx + priv->msg_obj_tx_first;
+			c_can_object_put(dev, IF_TX, obj, IF_COMM_TXRQST);
+		}
+	}
 }
 
 /* If we have a gap in the pending bits, that means we either
@@ -1238,6 +1243,7 @@ struct net_device *alloc_c_can_dev(int msg_obj_num)
 		return NULL;
 
 	priv = netdev_priv(dev);
+	spin_lock_init(&priv->tx_lock);
 	priv->msg_obj_num = msg_obj_num;
 	priv->msg_obj_rx_num = msg_obj_num - msg_obj_tx_num;
 	priv->msg_obj_rx_first = 1;
diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
index c72cb6a7fd37..520daa77f876 100644
--- a/drivers/net/can/c_can/c_can.h
+++ b/drivers/net/can/c_can/c_can.h
@@ -200,6 +200,7 @@ struct c_can_priv {
 	atomic_t sie_pending;
 	unsigned long tx_dir;
 	int last_status;
+	spinlock_t tx_lock;
 	struct c_can_tx_ring tx;
 	u16 (*read_reg)(const struct c_can_priv *priv, enum reg index);
 	void (*write_reg)(const struct c_can_priv *priv, enum reg index, u16 val);
@@ -236,4 +237,9 @@ static inline u8 c_can_get_tx_tail(const struct c_can_tx_ring *ring)
 	return ring->tail & (ring->obj_num - 1);
 }
 
+static inline u8 c_can_get_tx_free(const struct c_can_tx_ring *ring)
+{
+	return ring->obj_num - (ring->head - ring->tail);
+}
+
 #endif /* C_CAN_H */
-- 
2.17.1

Re: [PATCH 3/3] can: c_can: cache frames to operate as a true FIFO

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 6005 bytes --]

CC: kbuild-all(a)lists.01.org
In-Reply-To: <20210606201705.31307-4-dariobin@libero.it>
References: <20210606201705.31307-4-dariobin@libero.it>
TO: Dario Binacchi <dariobin@libero.it>
TO: linux-kernel(a)vger.kernel.org
CC: Gianluca Falavigna <gianluca.falavigna@inwind.it>
CC: Dario Binacchi <dariobin@libero.it>
CC: Jakub Kicinski <kuba@kernel.org>
CC: "Marc Kleine-Budde" <mkl@pengutronix.de>
CC: Oliver Hartkopp <socketcan@hartkopp.net>
CC: Tong Zhang <ztong0001@gmail.com>
CC: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
CC: Wolfgang Grandegger <wg@grandegger.com>
CC: YueHaibing <yuehaibing@huawei.com>

Hi Dario,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on mkl-can-next/testing]
[also build test WARNING on linux/master net/master linus/master v5.13-rc5]
[cannot apply to net-next/master sparc-next/master next-20210604]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Dario-Binacchi/can-c_can-cache-frames-to-operate-as-a-true-FIFO/20210607-042041
base:   https://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git testing
:::::: branch date: 14 hours ago
:::::: commit date: 14 hours ago
config: h8300-randconfig-s031-20210607 (attached as .config)
compiler: h8300-linux-gcc (GCC) 9.3.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # apt-get install sparse
        # sparse version: v0.6.3-341-g8af24329-dirty
        # https://github.com/0day-ci/linux/commit/19123a06211906a51c0647c1a427b6549635172f
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Dario-Binacchi/can-c_can-cache-frames-to-operate-as-a-true-FIFO/20210607-042041
        git checkout 19123a06211906a51c0647c1a427b6549635172f
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' W=1 ARCH=h8300 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>


sparse warnings: (new ones prefixed by >>)
>> drivers/net/can/c_can/c_can.c:491:9: sparse: sparse: context imbalance in 'c_can_start_xmit' - different lock contexts for basic block

vim +/c_can_start_xmit +491 drivers/net/can/c_can/c_can.c

5098c41911740f Dario Binacchi    2021-06-06  452  
881ff67ad45041 Bhupesh Sharma    2011-02-13  453  static netdev_tx_t c_can_start_xmit(struct sk_buff *skb,
881ff67ad45041 Bhupesh Sharma    2011-02-13  454  				    struct net_device *dev)
881ff67ad45041 Bhupesh Sharma    2011-02-13  455  {
881ff67ad45041 Bhupesh Sharma    2011-02-13  456  	struct can_frame *frame = (struct can_frame *)skb->data;
35bdafb576c5c0 Thomas Gleixner   2014-04-11  457  	struct c_can_priv *priv = netdev_priv(dev);
5098c41911740f Dario Binacchi    2021-06-06  458  	struct c_can_tx_ring *tx_ring = &priv->tx;
19123a06211906 Dario Binacchi    2021-06-06  459  	u32 idx, obj, cmd = IF_COMM_TX;
881ff67ad45041 Bhupesh Sharma    2011-02-13  460  
881ff67ad45041 Bhupesh Sharma    2011-02-13  461  	if (can_dropped_invalid_skb(dev, skb))
881ff67ad45041 Bhupesh Sharma    2011-02-13  462  		return NETDEV_TX_OK;
35bdafb576c5c0 Thomas Gleixner   2014-04-11  463  
5098c41911740f Dario Binacchi    2021-06-06  464  	if (c_can_tx_busy(priv, tx_ring))
5098c41911740f Dario Binacchi    2021-06-06  465  		return NETDEV_TX_BUSY;
5098c41911740f Dario Binacchi    2021-06-06  466  
5098c41911740f Dario Binacchi    2021-06-06  467  	idx = c_can_get_tx_head(tx_ring);
5098c41911740f Dario Binacchi    2021-06-06  468  	tx_ring->head++;
5098c41911740f Dario Binacchi    2021-06-06  469  	if (c_can_get_tx_free(tx_ring) == 0)
881ff67ad45041 Bhupesh Sharma    2011-02-13  470  		netif_stop_queue(dev);
5098c41911740f Dario Binacchi    2021-06-06  471  
19123a06211906 Dario Binacchi    2021-06-06  472  	spin_lock_bh(&priv->tx_lock);
19123a06211906 Dario Binacchi    2021-06-06  473  	if (idx < c_can_get_tx_tail(tx_ring))
19123a06211906 Dario Binacchi    2021-06-06  474  		cmd &= ~IF_COMM_TXRQST; /* Cache the message */
19123a06211906 Dario Binacchi    2021-06-06  475  	else
19123a06211906 Dario Binacchi    2021-06-06  476  		spin_unlock_bh(&priv->tx_lock);
5098c41911740f Dario Binacchi    2021-06-06  477  
172f6d3a031b5e Marc Kleine-Budde 2021-03-04  478  	/* Store the message in the interface so we can call
35bdafb576c5c0 Thomas Gleixner   2014-04-11  479  	 * can_put_echo_skb(). We must do this before we enable
35bdafb576c5c0 Thomas Gleixner   2014-04-11  480  	 * transmit as we might race against do_tx().
35bdafb576c5c0 Thomas Gleixner   2014-04-11  481  	 */
939415973fdfb2 Thomas Gleixner   2014-04-11  482  	c_can_setup_tx_object(dev, IF_TX, frame, idx);
c7b74967799b1a Oliver Hartkopp   2020-11-20  483  	priv->dlc[idx] = frame->len;
1dcb6e57db8334 Vincent Mailhol   2021-01-11  484  	can_put_echo_skb(skb, dev, idx, 0);
19123a06211906 Dario Binacchi    2021-06-06  485  	obj = idx + priv->msg_obj_tx_first;
19123a06211906 Dario Binacchi    2021-06-06  486  	c_can_object_put(dev, IF_TX, obj, cmd);
35bdafb576c5c0 Thomas Gleixner   2014-04-11  487  
19123a06211906 Dario Binacchi    2021-06-06  488  	if (spin_is_locked(&priv->tx_lock))
19123a06211906 Dario Binacchi    2021-06-06  489  		spin_unlock_bh(&priv->tx_lock);
881ff67ad45041 Bhupesh Sharma    2011-02-13  490  
881ff67ad45041 Bhupesh Sharma    2011-02-13 @491  	return NETDEV_TX_OK;
881ff67ad45041 Bhupesh Sharma    2011-02-13  492  }
881ff67ad45041 Bhupesh Sharma    2011-02-13  493  

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

[-- Attachment #2: config.gz --]
[-- Type: application/gzip, Size: 35002 bytes --]