All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
To: robh+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de
Cc: kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
	p.zabel@pengutronix.de, l.stach@pengutronix.de, krzk@kernel.org,
	agx@sigxcpu.org, marex@denx.de, andrew.smirnov@gmail.com,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, ping.bai@nxp.com,
	frieder.schrempf@kontron.de, aford173@gmail.com,
	abel.vesa@nxp.com, Peng Fan <peng.fan@nxp.com>
Subject: [PATCH V3 07/13] soc: imx: gpcv2: allow domains without power-sequence control
Date: Mon, 10 May 2021 12:00:39 +0800	[thread overview]
Message-ID: <20210510040045.13225-8-peng.fan@oss.nxp.com> (raw)
In-Reply-To: <20210510040045.13225-1-peng.fan@oss.nxp.com>

From: Lucas Stach <l.stach@pengutronix.de>

Some of the PGC domains only control the handshake with the ADB400
and don't have any power sequence controls. Make such domains work
by allowing the pxx and map bits to be empty and skip all actions
using those controls.

Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/soc/imx/gpcv2.c | 89 +++++++++++++++++++++++------------------
 1 file changed, 49 insertions(+), 40 deletions(-)

diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
index 800287abdbea..fdf759a7c865 100644
--- a/drivers/soc/imx/gpcv2.c
+++ b/drivers/soc/imx/gpcv2.c
@@ -163,24 +163,27 @@ static int imx_pgc_power_up(struct generic_pm_domain *genpd)
 		goto out_regulator_disable;
 	}
 
-	/* request the domain to power up */
-	regmap_update_bits(domain->regmap, GPC_PU_PGC_SW_PUP_REQ,
-			   domain->bits.pxx, domain->bits.pxx);
-	/*
-	 * As per "5.5.9.4 Example Code 4" in IMX7DRM.pdf wait
-	 * for PUP_REQ/PDN_REQ bit to be cleared
-	 */
-	ret = regmap_read_poll_timeout(domain->regmap, GPC_PU_PGC_SW_PUP_REQ,
-				       reg_val, !(reg_val & domain->bits.pxx),
-				       0, USEC_PER_MSEC);
-	if (ret) {
-		dev_err(domain->dev, "failed to command PGC\n");
-		goto out_clk_disable;
-	}
+	if (domain->bits.pxx) {
+		/* request the domain to power up */
+		regmap_update_bits(domain->regmap, GPC_PU_PGC_SW_PUP_REQ,
+				   domain->bits.pxx, domain->bits.pxx);
+		/*
+		 * As per "5.5.9.4 Example Code 4" in IMX7DRM.pdf wait
+		 * for PUP_REQ/PDN_REQ bit to be cleared
+		 */
+		ret = regmap_read_poll_timeout(domain->regmap,
+					       GPC_PU_PGC_SW_PUP_REQ, reg_val,
+					       !(reg_val & domain->bits.pxx),
+					       0, USEC_PER_MSEC);
+		if (ret) {
+			dev_err(domain->dev, "failed to command PGC\n");
+			goto out_clk_disable;
+		}
 
-	/* disable power control */
-	regmap_clear_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
-			  GPC_PGC_CTRL_PCR);
+		/* disable power control */
+		regmap_clear_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
+				  GPC_PGC_CTRL_PCR);
+	}
 
 	/* request the ADB400 to power up */
 	if (domain->bits.hskreq) {
@@ -245,23 +248,26 @@ static int imx_pgc_power_down(struct generic_pm_domain *genpd)
 		}
 	}
 
-	/* enable power control */
-	regmap_update_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
-			   GPC_PGC_CTRL_PCR, GPC_PGC_CTRL_PCR);
-
-	/* request the domain to power down */
-	regmap_update_bits(domain->regmap, GPC_PU_PGC_SW_PDN_REQ,
-			   domain->bits.pxx, domain->bits.pxx);
-	/*
-	 * As per "5.5.9.4 Example Code 4" in IMX7DRM.pdf wait
-	 * for PUP_REQ/PDN_REQ bit to be cleared
-	 */
-	ret = regmap_read_poll_timeout(domain->regmap, GPC_PU_PGC_SW_PDN_REQ,
-				       reg_val, !(reg_val & domain->bits.pxx),
-				       0, USEC_PER_MSEC);
-	if (ret) {
-		dev_err(domain->dev, "failed to command PGC\n");
-		goto out_clk_disable;
+	if (domain->bits.pxx) {
+		/* enable power control */
+		regmap_update_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
+				   GPC_PGC_CTRL_PCR, GPC_PGC_CTRL_PCR);
+
+		/* request the domain to power down */
+		regmap_update_bits(domain->regmap, GPC_PU_PGC_SW_PDN_REQ,
+				   domain->bits.pxx, domain->bits.pxx);
+		/*
+		 * As per "5.5.9.4 Example Code 4" in IMX7DRM.pdf wait
+		 * for PUP_REQ/PDN_REQ bit to be cleared
+		 */
+		ret = regmap_read_poll_timeout(domain->regmap,
+					       GPC_PU_PGC_SW_PDN_REQ, reg_val,
+					       !(reg_val & domain->bits.pxx),
+					       0, USEC_PER_MSEC);
+		if (ret) {
+			dev_err(domain->dev, "failed to command PGC\n");
+			goto out_clk_disable;
+		}
 	}
 
 	/* Disable reset clocks for all devices in the domain */
@@ -536,8 +542,9 @@ static int imx_pgc_domain_probe(struct platform_device *pdev)
 
 	pm_runtime_enable(domain->dev);
 
-	regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
-			   domain->bits.map, domain->bits.map);
+	if (domain->bits.map)
+		regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
+				   domain->bits.map, domain->bits.map);
 
 	ret = pm_genpd_init(&domain->genpd, NULL, true);
 	if (ret) {
@@ -557,8 +564,9 @@ static int imx_pgc_domain_probe(struct platform_device *pdev)
 out_genpd_remove:
 	pm_genpd_remove(&domain->genpd);
 out_domain_unmap:
-	regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
-			   domain->bits.map, 0);
+	if (domain->bits.map)
+		regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
+				   domain->bits.map, 0);
 	pm_runtime_disable(domain->dev);
 
 	return ret;
@@ -571,8 +579,9 @@ static int imx_pgc_domain_remove(struct platform_device *pdev)
 	of_genpd_del_provider(domain->dev->of_node);
 	pm_genpd_remove(&domain->genpd);
 
-	regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
-			   domain->bits.map, 0);
+	if (domain->bits.map)
+		regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
+				   domain->bits.map, 0);
 
 	pm_runtime_disable(domain->dev);
 
-- 
2.30.0


WARNING: multiple messages have this Message-ID (diff)
From: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
To: robh+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de
Cc: kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
	p.zabel@pengutronix.de, l.stach@pengutronix.de, krzk@kernel.org,
	agx@sigxcpu.org, marex@denx.de, andrew.smirnov@gmail.com,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, ping.bai@nxp.com,
	frieder.schrempf@kontron.de, aford173@gmail.com,
	abel.vesa@nxp.com, Peng Fan <peng.fan@nxp.com>
Subject: [PATCH V3 07/13] soc: imx: gpcv2: allow domains without power-sequence control
Date: Mon, 10 May 2021 12:00:39 +0800	[thread overview]
Message-ID: <20210510040045.13225-8-peng.fan@oss.nxp.com> (raw)
In-Reply-To: <20210510040045.13225-1-peng.fan@oss.nxp.com>

From: Lucas Stach <l.stach@pengutronix.de>

Some of the PGC domains only control the handshake with the ADB400
and don't have any power sequence controls. Make such domains work
by allowing the pxx and map bits to be empty and skip all actions
using those controls.

Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/soc/imx/gpcv2.c | 89 +++++++++++++++++++++++------------------
 1 file changed, 49 insertions(+), 40 deletions(-)

diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
index 800287abdbea..fdf759a7c865 100644
--- a/drivers/soc/imx/gpcv2.c
+++ b/drivers/soc/imx/gpcv2.c
@@ -163,24 +163,27 @@ static int imx_pgc_power_up(struct generic_pm_domain *genpd)
 		goto out_regulator_disable;
 	}
 
-	/* request the domain to power up */
-	regmap_update_bits(domain->regmap, GPC_PU_PGC_SW_PUP_REQ,
-			   domain->bits.pxx, domain->bits.pxx);
-	/*
-	 * As per "5.5.9.4 Example Code 4" in IMX7DRM.pdf wait
-	 * for PUP_REQ/PDN_REQ bit to be cleared
-	 */
-	ret = regmap_read_poll_timeout(domain->regmap, GPC_PU_PGC_SW_PUP_REQ,
-				       reg_val, !(reg_val & domain->bits.pxx),
-				       0, USEC_PER_MSEC);
-	if (ret) {
-		dev_err(domain->dev, "failed to command PGC\n");
-		goto out_clk_disable;
-	}
+	if (domain->bits.pxx) {
+		/* request the domain to power up */
+		regmap_update_bits(domain->regmap, GPC_PU_PGC_SW_PUP_REQ,
+				   domain->bits.pxx, domain->bits.pxx);
+		/*
+		 * As per "5.5.9.4 Example Code 4" in IMX7DRM.pdf wait
+		 * for PUP_REQ/PDN_REQ bit to be cleared
+		 */
+		ret = regmap_read_poll_timeout(domain->regmap,
+					       GPC_PU_PGC_SW_PUP_REQ, reg_val,
+					       !(reg_val & domain->bits.pxx),
+					       0, USEC_PER_MSEC);
+		if (ret) {
+			dev_err(domain->dev, "failed to command PGC\n");
+			goto out_clk_disable;
+		}
 
-	/* disable power control */
-	regmap_clear_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
-			  GPC_PGC_CTRL_PCR);
+		/* disable power control */
+		regmap_clear_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
+				  GPC_PGC_CTRL_PCR);
+	}
 
 	/* request the ADB400 to power up */
 	if (domain->bits.hskreq) {
@@ -245,23 +248,26 @@ static int imx_pgc_power_down(struct generic_pm_domain *genpd)
 		}
 	}
 
-	/* enable power control */
-	regmap_update_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
-			   GPC_PGC_CTRL_PCR, GPC_PGC_CTRL_PCR);
-
-	/* request the domain to power down */
-	regmap_update_bits(domain->regmap, GPC_PU_PGC_SW_PDN_REQ,
-			   domain->bits.pxx, domain->bits.pxx);
-	/*
-	 * As per "5.5.9.4 Example Code 4" in IMX7DRM.pdf wait
-	 * for PUP_REQ/PDN_REQ bit to be cleared
-	 */
-	ret = regmap_read_poll_timeout(domain->regmap, GPC_PU_PGC_SW_PDN_REQ,
-				       reg_val, !(reg_val & domain->bits.pxx),
-				       0, USEC_PER_MSEC);
-	if (ret) {
-		dev_err(domain->dev, "failed to command PGC\n");
-		goto out_clk_disable;
+	if (domain->bits.pxx) {
+		/* enable power control */
+		regmap_update_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
+				   GPC_PGC_CTRL_PCR, GPC_PGC_CTRL_PCR);
+
+		/* request the domain to power down */
+		regmap_update_bits(domain->regmap, GPC_PU_PGC_SW_PDN_REQ,
+				   domain->bits.pxx, domain->bits.pxx);
+		/*
+		 * As per "5.5.9.4 Example Code 4" in IMX7DRM.pdf wait
+		 * for PUP_REQ/PDN_REQ bit to be cleared
+		 */
+		ret = regmap_read_poll_timeout(domain->regmap,
+					       GPC_PU_PGC_SW_PDN_REQ, reg_val,
+					       !(reg_val & domain->bits.pxx),
+					       0, USEC_PER_MSEC);
+		if (ret) {
+			dev_err(domain->dev, "failed to command PGC\n");
+			goto out_clk_disable;
+		}
 	}
 
 	/* Disable reset clocks for all devices in the domain */
@@ -536,8 +542,9 @@ static int imx_pgc_domain_probe(struct platform_device *pdev)
 
 	pm_runtime_enable(domain->dev);
 
-	regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
-			   domain->bits.map, domain->bits.map);
+	if (domain->bits.map)
+		regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
+				   domain->bits.map, domain->bits.map);
 
 	ret = pm_genpd_init(&domain->genpd, NULL, true);
 	if (ret) {
@@ -557,8 +564,9 @@ static int imx_pgc_domain_probe(struct platform_device *pdev)
 out_genpd_remove:
 	pm_genpd_remove(&domain->genpd);
 out_domain_unmap:
-	regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
-			   domain->bits.map, 0);
+	if (domain->bits.map)
+		regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
+				   domain->bits.map, 0);
 	pm_runtime_disable(domain->dev);
 
 	return ret;
@@ -571,8 +579,9 @@ static int imx_pgc_domain_remove(struct platform_device *pdev)
 	of_genpd_del_provider(domain->dev->of_node);
 	pm_genpd_remove(&domain->genpd);
 
-	regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
-			   domain->bits.map, 0);
+	if (domain->bits.map)
+		regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
+				   domain->bits.map, 0);
 
 	pm_runtime_disable(domain->dev);
 
-- 
2.30.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-05-10  3:29 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-10  4:00 [PATCH V3 00/13] soc: imx: gpcv2: support i.MX8MM Peng Fan (OSS)
2021-05-10  4:00 ` Peng Fan (OSS)
2021-05-10  4:00 ` [PATCH V3 01/13] soc: imx: gpcv2: move to more ideomatic error handling in probe Peng Fan (OSS)
2021-05-10  4:00   ` Peng Fan (OSS)
2021-05-10  4:00 ` [PATCH V3 02/13] soc: imx: gpcv2: move domain mapping to domain driver probe Peng Fan (OSS)
2021-05-10  4:00   ` Peng Fan (OSS)
2021-05-23  2:59   ` Shawn Guo
2021-05-23  2:59     ` Shawn Guo
2021-05-10  4:00 ` [PATCH V3 03/13] soc: imx: gpcv2: switch to clk_bulk_* API Peng Fan (OSS)
2021-05-10  4:00   ` Peng Fan (OSS)
2021-05-10  4:00 ` [PATCH V3 04/13] soc: imx: gpcv2: split power up and power down sequence control Peng Fan (OSS)
2021-05-10  4:00   ` Peng Fan (OSS)
2021-05-10  4:00 ` [PATCH V3 05/13] soc: imx: gpcv2: wait for ADB400 handshake Peng Fan (OSS)
2021-05-10  4:00   ` Peng Fan (OSS)
2021-05-10  4:00 ` [PATCH V3 06/13] soc: imx: gpcv2: add runtime PM support for power-domains Peng Fan (OSS)
2021-05-10  4:00   ` Peng Fan (OSS)
2021-05-10  4:00 ` Peng Fan (OSS) [this message]
2021-05-10  4:00   ` [PATCH V3 07/13] soc: imx: gpcv2: allow domains without power-sequence control Peng Fan (OSS)
2021-05-10  4:00 ` [PATCH V3 08/13] dt-bindings: imx: gpcv2: add support for optional resets Peng Fan (OSS)
2021-05-10  4:00   ` Peng Fan (OSS)
2021-05-10 16:19   ` Rob Herring
2021-05-10 16:19     ` Rob Herring
2021-05-10  4:00 ` [PATCH V3 09/13] soc: " Peng Fan (OSS)
2021-05-10  4:00   ` Peng Fan (OSS)
2021-05-10  4:00 ` [PATCH V3 10/13] dt-bindings: power: add defines for i.MX8MM power domains Peng Fan (OSS)
2021-05-10  4:00   ` Peng Fan (OSS)
2021-05-10  4:00 ` [PATCH V3 11/13] soc: imx: gpcv2: add support " Peng Fan (OSS)
2021-05-10  4:00   ` Peng Fan (OSS)
2021-05-10  4:00 ` [PATCH V3 12/13] soc: imx: gpcv2: Add support for missing i.MX8MM VPU/DISPMIX " Peng Fan (OSS)
2021-05-10  4:00   ` Peng Fan (OSS)
2021-05-10  4:00 ` [PATCH V3 13/13] soc: imx: gpcv2: move reset assert after requesting domain power up Peng Fan (OSS)
2021-05-10  4:00   ` Peng Fan (OSS)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210510040045.13225-8-peng.fan@oss.nxp.com \
    --to=peng.fan@oss.nxp.com \
    --cc=abel.vesa@nxp.com \
    --cc=aford173@gmail.com \
    --cc=agx@sigxcpu.org \
    --cc=andrew.smirnov@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=frieder.schrempf@kontron.de \
    --cc=kernel@pengutronix.de \
    --cc=krzk@kernel.org \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marex@denx.de \
    --cc=p.zabel@pengutronix.de \
    --cc=peng.fan@nxp.com \
    --cc=ping.bai@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.