From: Oleksij Rempel <o.rempel@pengutronix.de> To: Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Andrew Lunn <andrew@lunn.ch>, Florian Fainelli <f.fainelli@gmail.com>, Heiner Kallweit <hkallweit1@gmail.com> Cc: Oleksij Rempel <o.rempel@pengutronix.de>, kernel@pengutronix.de, netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-imx@nxp.com, Fabio Estevam <festevam@gmail.com>, David Jander <david@protonic.nl>, Russell King <linux@armlinux.org.uk>, Philippe Schenker <philippe.schenker@toradex.com> Subject: [PATCH v3 2/2] ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value Date: Tue, 11 May 2021 06:30:39 +0200 [thread overview] Message-ID: <20210511043039.20056-3-o.rempel@pengutronix.de> (raw) In-Reply-To: <20210511043039.20056-1-o.rempel@pengutronix.de> Without SoC specific PHY fixups the network interface on this board will fail to work. Provide missing DT properties to make it work again. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- arch/arm/boot/dts/imx6dl-riotboard.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 065d3ab0f50a..e7d9bfbfd0e4 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -106,6 +106,8 @@ rgmii_phy: ethernet-phy@4 { reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; reset-assert-us = <10000>; reset-deassert-us = <1000>; + qca,smarteee-tw-us-1g = <24>; + qca,clk-out-frequency = <125000000>; }; }; }; -- 2.29.2
WARNING: multiple messages have this Message-ID (diff)
From: Oleksij Rempel <o.rempel@pengutronix.de> To: Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Andrew Lunn <andrew@lunn.ch>, Florian Fainelli <f.fainelli@gmail.com>, Heiner Kallweit <hkallweit1@gmail.com> Cc: Oleksij Rempel <o.rempel@pengutronix.de>, kernel@pengutronix.de, netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-imx@nxp.com, Fabio Estevam <festevam@gmail.com>, David Jander <david@protonic.nl>, Russell King <linux@armlinux.org.uk>, Philippe Schenker <philippe.schenker@toradex.com> Subject: [PATCH v3 2/2] ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value Date: Tue, 11 May 2021 06:30:39 +0200 [thread overview] Message-ID: <20210511043039.20056-3-o.rempel@pengutronix.de> (raw) In-Reply-To: <20210511043039.20056-1-o.rempel@pengutronix.de> Without SoC specific PHY fixups the network interface on this board will fail to work. Provide missing DT properties to make it work again. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- arch/arm/boot/dts/imx6dl-riotboard.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 065d3ab0f50a..e7d9bfbfd0e4 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -106,6 +106,8 @@ rgmii_phy: ethernet-phy@4 { reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; reset-assert-us = <10000>; reset-deassert-us = <1000>; + qca,smarteee-tw-us-1g = <24>; + qca,clk-out-frequency = <125000000>; }; }; }; -- 2.29.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-05-11 4:31 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-05-11 4:30 [PATCH v3 0/2] remove different PHY fixups - dts part Oleksij Rempel 2021-05-11 4:30 ` Oleksij Rempel 2021-05-11 4:30 ` [PATCH v3 1/2] ARM: dts: imx6: edmqmx6: set phy-mode to RGMII-ID Oleksij Rempel 2021-05-11 4:30 ` Oleksij Rempel 2021-05-11 12:48 ` Andrew Lunn 2021-05-11 12:48 ` Andrew Lunn 2021-05-11 4:30 ` Oleksij Rempel [this message] 2021-05-11 4:30 ` [PATCH v3 2/2] ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value Oleksij Rempel 2021-05-11 12:48 ` Andrew Lunn 2021-05-11 12:48 ` Andrew Lunn 2021-05-23 3:25 ` [PATCH v3 0/2] remove different PHY fixups - dts part Shawn Guo 2021-05-23 3:25 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210511043039.20056-3-o.rempel@pengutronix.de \ --to=o.rempel@pengutronix.de \ --cc=andrew@lunn.ch \ --cc=david@protonic.nl \ --cc=f.fainelli@gmail.com \ --cc=festevam@gmail.com \ --cc=hkallweit1@gmail.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=netdev@vger.kernel.org \ --cc=philippe.schenker@toradex.com \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.