* [PATCH v4] HID: ft260: improve error handling of ft260_hid_feature_report_get()
@ 2021-05-11 10:12 Michael Zaidman
2021-05-11 13:10 ` Tom Rix
2021-05-13 11:09 ` Jiri Kosina
0 siblings, 2 replies; 6+ messages in thread
From: Michael Zaidman @ 2021-05-11 10:12 UTC (permalink / raw)
To: trix, jikos, benjamin.tissoires
Cc: linux-i2c, linux-input, linux-kernel, Michael Zaidman
Fixes: 6a82582d9fa4 ("HID: ft260: add usb hid to i2c host bridge driver")
The ft260_hid_feature_report_get() checks if the return size matches
the requested size. But the function can also fail with at least -ENOMEM.
Add the < 0 checks.
In ft260_hid_feature_report_get(), do not do the memcpy to the caller's
buffer if there is an error.
---
v4 Fixed commit message
---
v3 Simplify and optimize the changes
---
v2: add unlikely()'s for error conditions
---
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
---
drivers/hid/hid-ft260.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/hid/hid-ft260.c b/drivers/hid/hid-ft260.c
index 047aa85a7c83..7f4cb823129e 100644
--- a/drivers/hid/hid-ft260.c
+++ b/drivers/hid/hid-ft260.c
@@ -249,7 +249,10 @@ static int ft260_hid_feature_report_get(struct hid_device *hdev,
ret = hid_hw_raw_request(hdev, report_id, buf, len, HID_FEATURE_REPORT,
HID_REQ_GET_REPORT);
- memcpy(data, buf, len);
+ if (likely(ret == len))
+ memcpy(data, buf, len);
+ else if (ret >= 0)
+ ret = -EIO;
kfree(buf);
return ret;
}
@@ -298,7 +301,7 @@ static int ft260_xfer_status(struct ft260_device *dev)
ret = ft260_hid_feature_report_get(hdev, FT260_I2C_STATUS,
(u8 *)&report, sizeof(report));
- if (ret < 0) {
+ if (unlikely(ret < 0)) {
hid_err(hdev, "failed to retrieve status: %d\n", ret);
return ret;
}
@@ -720,10 +723,9 @@ static int ft260_get_system_config(struct hid_device *hdev,
ret = ft260_hid_feature_report_get(hdev, FT260_SYSTEM_SETTINGS,
(u8 *)cfg, len);
- if (ret != len) {
+ if (ret < 0) {
hid_err(hdev, "failed to retrieve system status\n");
- if (ret >= 0)
- return -EIO;
+ return ret;
}
return 0;
}
@@ -776,8 +778,8 @@ static int ft260_byte_show(struct hid_device *hdev, int id, u8 *cfg, int len,
int ret;
ret = ft260_hid_feature_report_get(hdev, id, cfg, len);
- if (ret != len && ret >= 0)
- return -EIO;
+ if (ret < 0)
+ return ret;
return scnprintf(buf, PAGE_SIZE, "%hi\n", *field);
}
@@ -788,8 +790,8 @@ static int ft260_word_show(struct hid_device *hdev, int id, u8 *cfg, int len,
int ret;
ret = ft260_hid_feature_report_get(hdev, id, cfg, len);
- if (ret != len && ret >= 0)
- return -EIO;
+ if (ret < 0)
+ return ret;
return scnprintf(buf, PAGE_SIZE, "%hi\n", le16_to_cpu(*field));
}
@@ -940,10 +942,8 @@ static int ft260_probe(struct hid_device *hdev, const struct hid_device_id *id)
ret = ft260_hid_feature_report_get(hdev, FT260_CHIP_VERSION,
(u8 *)&version, sizeof(version));
- if (ret != sizeof(version)) {
+ if (ret < 0) {
hid_err(hdev, "failed to retrieve chip version\n");
- if (ret >= 0)
- ret = -EIO;
goto err_hid_close;
}
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH v4] HID: ft260: improve error handling of ft260_hid_feature_report_get()
2021-05-11 10:12 [PATCH v4] HID: ft260: improve error handling of ft260_hid_feature_report_get() Michael Zaidman
@ 2021-05-11 13:10 ` Tom Rix
2021-05-11 14:34 ` Michael Zaidman
2021-05-13 11:09 ` Jiri Kosina
1 sibling, 1 reply; 6+ messages in thread
From: Tom Rix @ 2021-05-11 13:10 UTC (permalink / raw)
To: Michael Zaidman, jikos, benjamin.tissoires
Cc: linux-i2c, linux-input, linux-kernel
Generally change is fine.
a nit below.
On 5/11/21 3:12 AM, Michael Zaidman wrote:
> Fixes: 6a82582d9fa4 ("HID: ft260: add usb hid to i2c host bridge driver")
>
> The ft260_hid_feature_report_get() checks if the return size matches
> the requested size. But the function can also fail with at least -ENOMEM.
> Add the < 0 checks.
>
> In ft260_hid_feature_report_get(), do not do the memcpy to the caller's
> buffer if there is an error.
>
> ---
> v4 Fixed commit message
> ---
> v3 Simplify and optimize the changes
> ---
> v2: add unlikely()'s for error conditions
> ---
>
> Signed-off-by: Tom Rix <trix@redhat.com>
> Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
> ---
> drivers/hid/hid-ft260.c | 24 ++++++++++++------------
> 1 file changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/hid/hid-ft260.c b/drivers/hid/hid-ft260.c
> index 047aa85a7c83..7f4cb823129e 100644
> --- a/drivers/hid/hid-ft260.c
> +++ b/drivers/hid/hid-ft260.c
> @@ -249,7 +249,10 @@ static int ft260_hid_feature_report_get(struct hid_device *hdev,
>
> ret = hid_hw_raw_request(hdev, report_id, buf, len, HID_FEATURE_REPORT,
> HID_REQ_GET_REPORT);
> - memcpy(data, buf, len);
> + if (likely(ret == len))
> + memcpy(data, buf, len);
> + else if (ret >= 0)
> + ret = -EIO;
> kfree(buf);
> return ret;
> }
> @@ -298,7 +301,7 @@ static int ft260_xfer_status(struct ft260_device *dev)
>
> ret = ft260_hid_feature_report_get(hdev, FT260_I2C_STATUS,
> (u8 *)&report, sizeof(report));
> - if (ret < 0) {
> + if (unlikely(ret < 0)) {
> hid_err(hdev, "failed to retrieve status: %d\n", ret);
> return ret;
> }
> @@ -720,10 +723,9 @@ static int ft260_get_system_config(struct hid_device *hdev,
>
> ret = ft260_hid_feature_report_get(hdev, FT260_SYSTEM_SETTINGS,
> (u8 *)cfg, len);
> - if (ret != len) {
> + if (ret < 0) {
nit: should be consistent and use unlikely(ret < 0) for this and other
similar checks.
Tom
> hid_err(hdev, "failed to retrieve system status\n");
> - if (ret >= 0)
> - return -EIO;
> + return ret;
> }
> return 0;
> }
> @@ -776,8 +778,8 @@ static int ft260_byte_show(struct hid_device *hdev, int id, u8 *cfg, int len,
> int ret;
>
> ret = ft260_hid_feature_report_get(hdev, id, cfg, len);
> - if (ret != len && ret >= 0)
> - return -EIO;
> + if (ret < 0)
> + return ret;
>
> return scnprintf(buf, PAGE_SIZE, "%hi\n", *field);
> }
> @@ -788,8 +790,8 @@ static int ft260_word_show(struct hid_device *hdev, int id, u8 *cfg, int len,
> int ret;
>
> ret = ft260_hid_feature_report_get(hdev, id, cfg, len);
> - if (ret != len && ret >= 0)
> - return -EIO;
> + if (ret < 0)
> + return ret;
>
> return scnprintf(buf, PAGE_SIZE, "%hi\n", le16_to_cpu(*field));
> }
> @@ -940,10 +942,8 @@ static int ft260_probe(struct hid_device *hdev, const struct hid_device_id *id)
>
> ret = ft260_hid_feature_report_get(hdev, FT260_CHIP_VERSION,
> (u8 *)&version, sizeof(version));
> - if (ret != sizeof(version)) {
> + if (ret < 0) {
> hid_err(hdev, "failed to retrieve chip version\n");
> - if (ret >= 0)
> - ret = -EIO;
> goto err_hid_close;
> }
>
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH v4] HID: ft260: improve error handling of ft260_hid_feature_report_get()
2021-05-11 13:10 ` Tom Rix
@ 2021-05-11 14:34 ` Michael Zaidman
2021-05-11 15:03 ` Tom Rix
0 siblings, 1 reply; 6+ messages in thread
From: Michael Zaidman @ 2021-05-11 14:34 UTC (permalink / raw)
To: Tom Rix
Cc: jikos, benjamin.tissoires, linux-i2c, linux-input, linux-kernel,
michael.zaidman
On Tue, May 11, 2021 at 06:10:36AM -0700, Tom Rix wrote:
> Generally change is fine.
>
> a nit below.
>
> On 5/11/21 3:12 AM, Michael Zaidman wrote:
> > Fixes: 6a82582d9fa4 ("HID: ft260: add usb hid to i2c host bridge driver")
> >
> > The ft260_hid_feature_report_get() checks if the return size matches
> > the requested size. But the function can also fail with at least -ENOMEM.
> > Add the < 0 checks.
> >
> > In ft260_hid_feature_report_get(), do not do the memcpy to the caller's
> > buffer if there is an error.
> >
> > ---
> > v4 Fixed commit message
> > ---
> > v3 Simplify and optimize the changes
> > ---
> > v2: add unlikely()'s for error conditions
> > ---
> >
> > Signed-off-by: Tom Rix <trix@redhat.com>
> > Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
> > ---
> > drivers/hid/hid-ft260.c | 24 ++++++++++++------------
> > 1 file changed, 12 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/hid/hid-ft260.c b/drivers/hid/hid-ft260.c
> > index 047aa85a7c83..7f4cb823129e 100644
> > --- a/drivers/hid/hid-ft260.c
> > +++ b/drivers/hid/hid-ft260.c
> > @@ -249,7 +249,10 @@ static int ft260_hid_feature_report_get(struct hid_device *hdev,
> > ret = hid_hw_raw_request(hdev, report_id, buf, len, HID_FEATURE_REPORT,
> > HID_REQ_GET_REPORT);
> > - memcpy(data, buf, len);
> > + if (likely(ret == len))
> > + memcpy(data, buf, len);
> > + else if (ret >= 0)
> > + ret = -EIO;
> > kfree(buf);
> > return ret;
> > }
> > @@ -298,7 +301,7 @@ static int ft260_xfer_status(struct ft260_device *dev)
> > ret = ft260_hid_feature_report_get(hdev, FT260_I2C_STATUS,
> > (u8 *)&report, sizeof(report));
> > - if (ret < 0) {
> > + if (unlikely(ret < 0)) {
> > hid_err(hdev, "failed to retrieve status: %d\n", ret);
> > return ret;
> > }
> > @@ -720,10 +723,9 @@ static int ft260_get_system_config(struct hid_device *hdev,
> > ret = ft260_hid_feature_report_get(hdev, FT260_SYSTEM_SETTINGS,
> > (u8 *)cfg, len);
> > - if (ret != len) {
> > + if (ret < 0) {
>
> nit: should be consistent and use unlikely(ret < 0) for this and other
> similar checks.
>
> Tom
I preserved the likely/unlikely hints in the critical path where the
performance matters. And for the sake of consistency, I removed them from
the rest of the places that are called rarely and are not performance-critical
to be aligned to the other "if" statements in the code.
Michael
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH v4] HID: ft260: improve error handling of ft260_hid_feature_report_get()
2021-05-11 14:34 ` Michael Zaidman
@ 2021-05-11 15:03 ` Tom Rix
0 siblings, 0 replies; 6+ messages in thread
From: Tom Rix @ 2021-05-11 15:03 UTC (permalink / raw)
To: Michael Zaidman
Cc: jikos, benjamin.tissoires, linux-i2c, linux-input, linux-kernel
On 5/11/21 7:34 AM, Michael Zaidman wrote:
> On Tue, May 11, 2021 at 06:10:36AM -0700, Tom Rix wrote:
>> Generally change is fine.
>>
>> a nit below.
>>
>> On 5/11/21 3:12 AM, Michael Zaidman wrote:
>>> Fixes: 6a82582d9fa4 ("HID: ft260: add usb hid to i2c host bridge driver")
>>>
>>> The ft260_hid_feature_report_get() checks if the return size matches
>>> the requested size. But the function can also fail with at least -ENOMEM.
>>> Add the < 0 checks.
>>>
>>> In ft260_hid_feature_report_get(), do not do the memcpy to the caller's
>>> buffer if there is an error.
>>>
>>> ---
>>> v4 Fixed commit message
>>> ---
>>> v3 Simplify and optimize the changes
>>> ---
>>> v2: add unlikely()'s for error conditions
>>> ---
>>>
>>> Signed-off-by: Tom Rix <trix@redhat.com>
>>> Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
>>> ---
>>> drivers/hid/hid-ft260.c | 24 ++++++++++++------------
>>> 1 file changed, 12 insertions(+), 12 deletions(-)
>>>
>>> diff --git a/drivers/hid/hid-ft260.c b/drivers/hid/hid-ft260.c
>>> index 047aa85a7c83..7f4cb823129e 100644
>>> --- a/drivers/hid/hid-ft260.c
>>> +++ b/drivers/hid/hid-ft260.c
>>> @@ -249,7 +249,10 @@ static int ft260_hid_feature_report_get(struct hid_device *hdev,
>>> ret = hid_hw_raw_request(hdev, report_id, buf, len, HID_FEATURE_REPORT,
>>> HID_REQ_GET_REPORT);
>>> - memcpy(data, buf, len);
>>> + if (likely(ret == len))
>>> + memcpy(data, buf, len);
>>> + else if (ret >= 0)
>>> + ret = -EIO;
>>> kfree(buf);
>>> return ret;
>>> }
>>> @@ -298,7 +301,7 @@ static int ft260_xfer_status(struct ft260_device *dev)
>>> ret = ft260_hid_feature_report_get(hdev, FT260_I2C_STATUS,
>>> (u8 *)&report, sizeof(report));
>>> - if (ret < 0) {
>>> + if (unlikely(ret < 0)) {
>>> hid_err(hdev, "failed to retrieve status: %d\n", ret);
>>> return ret;
>>> }
>>> @@ -720,10 +723,9 @@ static int ft260_get_system_config(struct hid_device *hdev,
>>> ret = ft260_hid_feature_report_get(hdev, FT260_SYSTEM_SETTINGS,
>>> (u8 *)cfg, len);
>>> - if (ret != len) {
>>> + if (ret < 0) {
>> nit: should be consistent and use unlikely(ret < 0) for this and other
>> similar checks.
>>
>> Tom
> I preserved the likely/unlikely hints in the critical path where the
> performance matters. And for the sake of consistency, I removed them from
> the rest of the places that are called rarely and are not performance-critical
> to be aligned to the other "if" statements in the code.
This is fine.
Thanks,
Tom
>
> Michael
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v4] HID: ft260: improve error handling of ft260_hid_feature_report_get()
2021-05-11 10:12 [PATCH v4] HID: ft260: improve error handling of ft260_hid_feature_report_get() Michael Zaidman
2021-05-11 13:10 ` Tom Rix
@ 2021-05-13 11:09 ` Jiri Kosina
2021-05-13 13:15 ` Tom Rix
1 sibling, 1 reply; 6+ messages in thread
From: Jiri Kosina @ 2021-05-13 11:09 UTC (permalink / raw)
To: Michael Zaidman
Cc: trix, benjamin.tissoires, linux-i2c, linux-input, linux-kernel
On Tue, 11 May 2021, Michael Zaidman wrote:
> Fixes: 6a82582d9fa4 ("HID: ft260: add usb hid to i2c host bridge driver")
>
> The ft260_hid_feature_report_get() checks if the return size matches
> the requested size. But the function can also fail with at least -ENOMEM.
> Add the < 0 checks.
>
> In ft260_hid_feature_report_get(), do not do the memcpy to the caller's
> buffer if there is an error.
>
> ---
> v4 Fixed commit message
> ---
> v3 Simplify and optimize the changes
> ---
> v2: add unlikely()'s for error conditions
> ---
>
> Signed-off-by: Tom Rix <trix@redhat.com>
> Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
Who should be the author of the git commit?
Thanks,
--
Jiri Kosina
SUSE Labs
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH v4] HID: ft260: improve error handling of ft260_hid_feature_report_get()
2021-05-13 11:09 ` Jiri Kosina
@ 2021-05-13 13:15 ` Tom Rix
0 siblings, 0 replies; 6+ messages in thread
From: Tom Rix @ 2021-05-13 13:15 UTC (permalink / raw)
To: Jiri Kosina, Michael Zaidman
Cc: benjamin.tissoires, linux-i2c, linux-input, linux-kernel
On 5/13/21 4:09 AM, Jiri Kosina wrote:
> On Tue, 11 May 2021, Michael Zaidman wrote:
>
>> Fixes: 6a82582d9fa4 ("HID: ft260: add usb hid to i2c host bridge driver")
>>
>> The ft260_hid_feature_report_get() checks if the return size matches
>> the requested size. But the function can also fail with at least -ENOMEM.
>> Add the < 0 checks.
>>
>> In ft260_hid_feature_report_get(), do not do the memcpy to the caller's
>> buffer if there is an error.
>>
>> ---
>> v4 Fixed commit message
>> ---
>> v3 Simplify and optimize the changes
>> ---
>> v2: add unlikely()'s for error conditions
>> ---
>>
>> Signed-off-by: Tom Rix <trix@redhat.com>
>> Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
> Who should be the author of the git commit?
Go with the latest patch's author, Micheal.
Tom
>
> Thanks,
>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-05-13 13:16 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-11 10:12 [PATCH v4] HID: ft260: improve error handling of ft260_hid_feature_report_get() Michael Zaidman
2021-05-11 13:10 ` Tom Rix
2021-05-11 14:34 ` Michael Zaidman
2021-05-11 15:03 ` Tom Rix
2021-05-13 11:09 ` Jiri Kosina
2021-05-13 13:15 ` Tom Rix
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.