All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jouni Malinen <jouni@codeaurora.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: ath11k@lists.infradead.org, linux-wireless@vger.kernel.org,
	Baochen Qiang <bqiang@codeaurora.org>,
	Govind Singh <govinds@codeaurora.org>,
	Jouni Malinen <jouni@codeaurora.org>
Subject: [PATCH 1/7] ath11k: add hw reg support for WCN6855
Date: Tue, 11 May 2021 19:22:08 +0300	[thread overview]
Message-ID: <20210511162214.29475-2-jouni@codeaurora.org> (raw)
In-Reply-To: <20210511162214.29475-1-jouni@codeaurora.org>

From: Baochen Qiang <bqiang@codeaurora.org>

Reg address of WCN6855 is different from other devices,
so add separate reg definition for this target.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1

Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Baochen Qiang <bqiang@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/hw.c | 71 ++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath11k/hw.h |  1 +
 2 files changed, 72 insertions(+)

diff --git a/drivers/net/wireless/ath/ath11k/hw.c b/drivers/net/wireless/ath/ath11k/hw.c
index 377ae8d5b58f..d9d7c4608052 100644
--- a/drivers/net/wireless/ath/ath11k/hw.c
+++ b/drivers/net/wireless/ath/ath11k/hw.c
@@ -1688,3 +1688,74 @@ const struct ath11k_hw_regs qcn9074_regs = {
 	.pcie_qserdes_sysclk_en_sel = 0x01e0e0a8,
 	.pcie_pcs_osc_dtct_config_base = 0x01e0f45c,
 };
+
+const struct ath11k_hw_regs wcn6855_regs = {
+	/* SW2TCL(x) R0 ring configuration address */
+	.hal_tcl1_ring_base_lsb = 0x00000690,
+	.hal_tcl1_ring_base_msb = 0x00000694,
+	.hal_tcl1_ring_id = 0x00000698,
+	.hal_tcl1_ring_misc = 0x000006a0,
+	.hal_tcl1_ring_tp_addr_lsb = 0x000006ac,
+	.hal_tcl1_ring_tp_addr_msb = 0x000006b0,
+	.hal_tcl1_ring_consumer_int_setup_ix0 = 0x000006c0,
+	.hal_tcl1_ring_consumer_int_setup_ix1 = 0x000006c4,
+	.hal_tcl1_ring_msi1_base_lsb = 0x000006d8,
+	.hal_tcl1_ring_msi1_base_msb = 0x000006dc,
+	.hal_tcl1_ring_msi1_data = 0x000006e0,
+	.hal_tcl2_ring_base_lsb = 0x000006e8,
+	.hal_tcl_ring_base_lsb = 0x00000798,
+
+	/* TCL STATUS ring address */
+	.hal_tcl_status_ring_base_lsb = 0x000008a0,
+
+	/* REO2SW(x) R0 ring configuration address */
+	.hal_reo1_ring_base_lsb = 0x00000244,
+	.hal_reo1_ring_base_msb = 0x00000248,
+	.hal_reo1_ring_id = 0x0000024c,
+	.hal_reo1_ring_misc = 0x00000254,
+	.hal_reo1_ring_hp_addr_lsb = 0x00000258,
+	.hal_reo1_ring_hp_addr_msb = 0x0000025c,
+	.hal_reo1_ring_producer_int_setup = 0x00000268,
+	.hal_reo1_ring_msi1_base_lsb = 0x0000028c,
+	.hal_reo1_ring_msi1_base_msb = 0x00000290,
+	.hal_reo1_ring_msi1_data = 0x00000294,
+	.hal_reo2_ring_base_lsb = 0x0000029c,
+	.hal_reo1_aging_thresh_ix_0 = 0x000005bc,
+	.hal_reo1_aging_thresh_ix_1 = 0x000005c0,
+	.hal_reo1_aging_thresh_ix_2 = 0x000005c4,
+	.hal_reo1_aging_thresh_ix_3 = 0x000005c8,
+
+	/* REO2SW(x) R2 ring pointers (head/tail) address */
+	.hal_reo1_ring_hp = 0x00003030,
+	.hal_reo1_ring_tp = 0x00003034,
+	.hal_reo2_ring_hp = 0x00003038,
+
+	/* REO2TCL R0 ring configuration address */
+	.hal_reo_tcl_ring_base_lsb = 0x00000454,
+	.hal_reo_tcl_ring_hp = 0x00003060,
+
+	/* REO status address */
+	.hal_reo_status_ring_base_lsb = 0x0000055c,
+	.hal_reo_status_hp = 0x00003078,
+
+	/* WCSS relative address */
+	.hal_seq_wcss_umac_ce0_src_reg = 0x1b80000,
+	.hal_seq_wcss_umac_ce0_dst_reg = 0x1b81000,
+	.hal_seq_wcss_umac_ce1_src_reg = 0x1b82000,
+	.hal_seq_wcss_umac_ce1_dst_reg = 0x1b83000,
+
+	/* WBM Idle address */
+	.hal_wbm_idle_link_ring_base_lsb = 0x00000870,
+	.hal_wbm_idle_link_ring_misc = 0x00000880,
+
+	/* SW2WBM release address */
+	.hal_wbm_release_ring_base_lsb = 0x000001e8,
+
+	/* WBM2SW release address */
+	.hal_wbm0_release_ring_base_lsb = 0x00000920,
+	.hal_wbm1_release_ring_base_lsb = 0x00000978,
+
+	/* PCIe base address */
+	.pcie_qserdes_sysclk_en_sel = 0x01e0c0ac,
+	.pcie_pcs_osc_dtct_config_base = 0x01e0c628,
+};
diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h
index c81a6328361d..4e7261c0dca1 100644
--- a/drivers/net/wireless/ath/ath11k/hw.h
+++ b/drivers/net/wireless/ath/ath11k/hw.h
@@ -318,5 +318,6 @@ struct ath11k_hw_regs {
 extern const struct ath11k_hw_regs ipq8074_regs;
 extern const struct ath11k_hw_regs qca6390_regs;
 extern const struct ath11k_hw_regs qcn9074_regs;
+extern const struct ath11k_hw_regs wcn6855_regs;
 
 #endif
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Jouni Malinen <jouni@codeaurora.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: ath11k@lists.infradead.org, linux-wireless@vger.kernel.org,
	Baochen Qiang <bqiang@codeaurora.org>,
	Govind Singh <govinds@codeaurora.org>,
	Jouni Malinen <jouni@codeaurora.org>
Subject: [PATCH 1/7] ath11k: add hw reg support for WCN6855
Date: Tue, 11 May 2021 19:22:08 +0300	[thread overview]
Message-ID: <20210511162214.29475-2-jouni@codeaurora.org> (raw)
In-Reply-To: <20210511162214.29475-1-jouni@codeaurora.org>

From: Baochen Qiang <bqiang@codeaurora.org>

Reg address of WCN6855 is different from other devices,
so add separate reg definition for this target.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1

Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Baochen Qiang <bqiang@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/hw.c | 71 ++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath11k/hw.h |  1 +
 2 files changed, 72 insertions(+)

diff --git a/drivers/net/wireless/ath/ath11k/hw.c b/drivers/net/wireless/ath/ath11k/hw.c
index 377ae8d5b58f..d9d7c4608052 100644
--- a/drivers/net/wireless/ath/ath11k/hw.c
+++ b/drivers/net/wireless/ath/ath11k/hw.c
@@ -1688,3 +1688,74 @@ const struct ath11k_hw_regs qcn9074_regs = {
 	.pcie_qserdes_sysclk_en_sel = 0x01e0e0a8,
 	.pcie_pcs_osc_dtct_config_base = 0x01e0f45c,
 };
+
+const struct ath11k_hw_regs wcn6855_regs = {
+	/* SW2TCL(x) R0 ring configuration address */
+	.hal_tcl1_ring_base_lsb = 0x00000690,
+	.hal_tcl1_ring_base_msb = 0x00000694,
+	.hal_tcl1_ring_id = 0x00000698,
+	.hal_tcl1_ring_misc = 0x000006a0,
+	.hal_tcl1_ring_tp_addr_lsb = 0x000006ac,
+	.hal_tcl1_ring_tp_addr_msb = 0x000006b0,
+	.hal_tcl1_ring_consumer_int_setup_ix0 = 0x000006c0,
+	.hal_tcl1_ring_consumer_int_setup_ix1 = 0x000006c4,
+	.hal_tcl1_ring_msi1_base_lsb = 0x000006d8,
+	.hal_tcl1_ring_msi1_base_msb = 0x000006dc,
+	.hal_tcl1_ring_msi1_data = 0x000006e0,
+	.hal_tcl2_ring_base_lsb = 0x000006e8,
+	.hal_tcl_ring_base_lsb = 0x00000798,
+
+	/* TCL STATUS ring address */
+	.hal_tcl_status_ring_base_lsb = 0x000008a0,
+
+	/* REO2SW(x) R0 ring configuration address */
+	.hal_reo1_ring_base_lsb = 0x00000244,
+	.hal_reo1_ring_base_msb = 0x00000248,
+	.hal_reo1_ring_id = 0x0000024c,
+	.hal_reo1_ring_misc = 0x00000254,
+	.hal_reo1_ring_hp_addr_lsb = 0x00000258,
+	.hal_reo1_ring_hp_addr_msb = 0x0000025c,
+	.hal_reo1_ring_producer_int_setup = 0x00000268,
+	.hal_reo1_ring_msi1_base_lsb = 0x0000028c,
+	.hal_reo1_ring_msi1_base_msb = 0x00000290,
+	.hal_reo1_ring_msi1_data = 0x00000294,
+	.hal_reo2_ring_base_lsb = 0x0000029c,
+	.hal_reo1_aging_thresh_ix_0 = 0x000005bc,
+	.hal_reo1_aging_thresh_ix_1 = 0x000005c0,
+	.hal_reo1_aging_thresh_ix_2 = 0x000005c4,
+	.hal_reo1_aging_thresh_ix_3 = 0x000005c8,
+
+	/* REO2SW(x) R2 ring pointers (head/tail) address */
+	.hal_reo1_ring_hp = 0x00003030,
+	.hal_reo1_ring_tp = 0x00003034,
+	.hal_reo2_ring_hp = 0x00003038,
+
+	/* REO2TCL R0 ring configuration address */
+	.hal_reo_tcl_ring_base_lsb = 0x00000454,
+	.hal_reo_tcl_ring_hp = 0x00003060,
+
+	/* REO status address */
+	.hal_reo_status_ring_base_lsb = 0x0000055c,
+	.hal_reo_status_hp = 0x00003078,
+
+	/* WCSS relative address */
+	.hal_seq_wcss_umac_ce0_src_reg = 0x1b80000,
+	.hal_seq_wcss_umac_ce0_dst_reg = 0x1b81000,
+	.hal_seq_wcss_umac_ce1_src_reg = 0x1b82000,
+	.hal_seq_wcss_umac_ce1_dst_reg = 0x1b83000,
+
+	/* WBM Idle address */
+	.hal_wbm_idle_link_ring_base_lsb = 0x00000870,
+	.hal_wbm_idle_link_ring_misc = 0x00000880,
+
+	/* SW2WBM release address */
+	.hal_wbm_release_ring_base_lsb = 0x000001e8,
+
+	/* WBM2SW release address */
+	.hal_wbm0_release_ring_base_lsb = 0x00000920,
+	.hal_wbm1_release_ring_base_lsb = 0x00000978,
+
+	/* PCIe base address */
+	.pcie_qserdes_sysclk_en_sel = 0x01e0c0ac,
+	.pcie_pcs_osc_dtct_config_base = 0x01e0c628,
+};
diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h
index c81a6328361d..4e7261c0dca1 100644
--- a/drivers/net/wireless/ath/ath11k/hw.h
+++ b/drivers/net/wireless/ath/ath11k/hw.h
@@ -318,5 +318,6 @@ struct ath11k_hw_regs {
 extern const struct ath11k_hw_regs ipq8074_regs;
 extern const struct ath11k_hw_regs qca6390_regs;
 extern const struct ath11k_hw_regs qcn9074_regs;
+extern const struct ath11k_hw_regs wcn6855_regs;
 
 #endif
-- 
2.25.1


-- 
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

  reply	other threads:[~2021-05-11 16:23 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-11 16:22 [PATCH 0/7] ath11k: add support for WCN6855 Jouni Malinen
2021-05-11 16:22 ` Jouni Malinen
2021-05-11 16:22 ` Jouni Malinen [this message]
2021-05-11 16:22   ` [PATCH 1/7] ath11k: add hw reg " Jouni Malinen
2021-05-31 15:09   ` Kalle Valo
2021-05-31 15:09   ` Kalle Valo
2021-06-12 10:31   ` Kalle Valo
2021-06-12 10:31   ` Kalle Valo
2021-05-11 16:22 ` [PATCH 2/7] ath11k: add dp " Jouni Malinen
2021-05-11 16:22   ` Jouni Malinen
2021-05-11 16:22 ` [PATCH 3/7] ath11k: setup REO " Jouni Malinen
2021-05-11 16:22   ` Jouni Malinen
2021-05-11 16:22 ` [PATCH 4/7] ath11k: setup WBM_IDLE_LINK ring once again Jouni Malinen
2021-05-11 16:22   ` Jouni Malinen
2021-05-11 16:22 ` [PATCH 5/7] ath11k: add support to get peer id for WCN6855 Jouni Malinen
2021-05-11 16:22   ` Jouni Malinen
2021-05-11 16:22 ` [PATCH 6/7] ath11k: add support " Jouni Malinen
2021-05-11 16:22   ` Jouni Malinen
2021-05-11 16:22 ` [PATCH 7/7] ath11k: don't call ath11k_pci_set_l1ss " Jouni Malinen
2021-05-11 16:22   ` Jouni Malinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210511162214.29475-2-jouni@codeaurora.org \
    --to=jouni@codeaurora.org \
    --cc=ath11k@lists.infradead.org \
    --cc=bqiang@codeaurora.org \
    --cc=govinds@codeaurora.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.