* [PATCH] ARM: dts: ixp4xx: Add beeper to the NSLU2
@ 2021-05-13 10:09 Linus Walleij
0 siblings, 0 replies; only message in thread
From: Linus Walleij @ 2021-05-13 10:09 UTC (permalink / raw)
To: linux-arm-kernel, Imre Kaloz, Krzysztof Halasa; +Cc: Linus Walleij
This adds the beeper GPIO to the NSLU2 completing the board
support.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
index 46dda0a895e7..5b8dcc19deee 100644
--- a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
@@ -90,6 +90,11 @@ gpio-poweroff {
timeout-ms = <5000>;
};
+ gpio-beeper {
+ compatible = "gpio-beeper";
+ gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ };
+
soc {
bus@50000000 {
/* The first 16MB region at CS0 on the expansion bus */
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2021-05-13 10:11 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-13 10:09 [PATCH] ARM: dts: ixp4xx: Add beeper to the NSLU2 Linus Walleij
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.