All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Kettenis <mark.kettenis@xs4all.nl>
To: devicetree@vger.kernel.org
Cc: Mark Kettenis <kettenis@openbsd.org>,
	Hector Martin <marcan@marcan.st>,
	Linus Walleij <linus.walleij@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 0/2] Apple M1 pinctrl DT bindings
Date: Sun, 16 May 2021 20:32:16 +0200	[thread overview]
Message-ID: <20210516183221.93686-1-mark.kettenis@xs4all.nl> (raw)

From: Mark Kettenis <kettenis@openbsd.org>

This small series adds bindings for the pin and GPIO controller found
on the Apple M1 SoC.

At this point, the primary consumer for these bindings is U-Boot.
With the help of these bindings U-Boot can bring up the PCIe root
complex into a state where the OS use it without having to deal with
the GPIO pins.  A Linux driver may be implemented later to support
power management and/or other devices that need GPIO control.  Since
the binding is based on standard pinmux node bindings this should be
relatively easy.

Changelog:

v2: - Fix typo in DT schema


Mark Kettenis (2):
  dt-bindings: pinctrl: Add DT bindings for apple,pinctrl
  arm64: apple: Add pinctrl nodes

 .../bindings/pinctrl/apple,pinctrl.yaml       | 103 ++++++++++++++++++
 MAINTAINERS                                   |   2 +
 arch/arm64/boot/dts/apple/t8103.dtsi          |  83 ++++++++++++++
 include/dt-bindings/pinctrl/apple.h           |  13 +++
 4 files changed, 201 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
 create mode 100644 include/dt-bindings/pinctrl/apple.h

-- 
2.31.1


WARNING: multiple messages have this Message-ID (diff)
From: Mark Kettenis <mark.kettenis@xs4all.nl>
To: devicetree@vger.kernel.org
Cc: Mark Kettenis <kettenis@openbsd.org>,
	Hector Martin <marcan@marcan.st>,
	Linus Walleij <linus.walleij@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 0/2] Apple M1 pinctrl DT bindings
Date: Sun, 16 May 2021 20:32:16 +0200	[thread overview]
Message-ID: <20210516183221.93686-1-mark.kettenis@xs4all.nl> (raw)

From: Mark Kettenis <kettenis@openbsd.org>

This small series adds bindings for the pin and GPIO controller found
on the Apple M1 SoC.

At this point, the primary consumer for these bindings is U-Boot.
With the help of these bindings U-Boot can bring up the PCIe root
complex into a state where the OS use it without having to deal with
the GPIO pins.  A Linux driver may be implemented later to support
power management and/or other devices that need GPIO control.  Since
the binding is based on standard pinmux node bindings this should be
relatively easy.

Changelog:

v2: - Fix typo in DT schema


Mark Kettenis (2):
  dt-bindings: pinctrl: Add DT bindings for apple,pinctrl
  arm64: apple: Add pinctrl nodes

 .../bindings/pinctrl/apple,pinctrl.yaml       | 103 ++++++++++++++++++
 MAINTAINERS                                   |   2 +
 arch/arm64/boot/dts/apple/t8103.dtsi          |  83 ++++++++++++++
 include/dt-bindings/pinctrl/apple.h           |  13 +++
 4 files changed, 201 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
 create mode 100644 include/dt-bindings/pinctrl/apple.h

-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2021-05-16 18:39 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-16 18:32 Mark Kettenis [this message]
2021-05-16 18:32 ` [PATCH 0/2] Apple M1 pinctrl DT bindings Mark Kettenis
2021-05-16 18:32 ` [PATCH v2 1/2] dt-bindings: pinctrl: Add DT bindings for apple,pinctrl Mark Kettenis
2021-05-16 18:32   ` [PATCH v2 1/2] dt-bindings: pinctrl: Add DT bindings for apple, pinctrl Mark Kettenis
2021-05-18 13:43   ` [PATCH v2 1/2] dt-bindings: pinctrl: Add DT bindings for apple,pinctrl Rob Herring
2021-05-18 13:43     ` Rob Herring
2021-05-20 11:15     ` Mark Kettenis
2021-05-20 11:15       ` Mark Kettenis
2021-05-16 18:32 ` [PATCH v2 2/2] arm64: apple: Add pinctrl nodes Mark Kettenis
2021-05-16 18:32   ` Mark Kettenis
  -- strict thread matches above, loose matches on Subject: below --
2021-05-08 14:19 [PATCH 0/2] Apple M1 pinctrl DT bindings Mark Kettenis
2021-05-08 14:19 ` Mark Kettenis

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210516183221.93686-1-mark.kettenis@xs4all.nl \
    --to=mark.kettenis@xs4all.nl \
    --cc=devicetree@vger.kernel.org \
    --cc=kettenis@openbsd.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcan@marcan.st \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.