* [RESEND PATCH v2 0/2] STM32 USBPHYC vbus-supply property support
@ 2021-05-17 12:08 ` Amelie Delaunay
0 siblings, 0 replies; 12+ messages in thread
From: Amelie Delaunay @ 2021-05-17 12:08 UTC (permalink / raw)
To: Kishon Vijay Abraham I, Vinod Koul, Rob Herring,
Alexandre Torgue, Maxime Coquelin
Cc: linux-phy, linux-kernel, devicetree, linux-arm-kernel,
linux-stm32, Amelie Delaunay
STM32 USBPHYC provides two USB High-Speed ports which are used by controllers
with Host capabilities. That's why vbus-supply has to be supported on each
phy node.
---
Changes in v2:
- use connector node vbus-supply property as suggested by Rob
---
Amelie Delaunay (2):
dt-bindings: phy: add vbus-supply optional property to
phy-stm32-usbphyc
phy: stm32: manage optional vbus regulator on phy_power_on/off
.../bindings/phy/phy-stm32-usbphyc.yaml | 11 +++++++
drivers/phy/st/phy-stm32-usbphyc.c | 31 +++++++++++++++++++
2 files changed, 42 insertions(+)
--
2.17.1
^ permalink raw reply [flat|nested] 12+ messages in thread
* [RESEND PATCH v2 0/2] STM32 USBPHYC vbus-supply property support
@ 2021-05-17 12:08 ` Amelie Delaunay
0 siblings, 0 replies; 12+ messages in thread
From: Amelie Delaunay @ 2021-05-17 12:08 UTC (permalink / raw)
To: Kishon Vijay Abraham I, Vinod Koul, Rob Herring,
Alexandre Torgue, Maxime Coquelin
Cc: linux-phy, linux-kernel, devicetree, linux-arm-kernel,
linux-stm32, Amelie Delaunay
STM32 USBPHYC provides two USB High-Speed ports which are used by controllers
with Host capabilities. That's why vbus-supply has to be supported on each
phy node.
---
Changes in v2:
- use connector node vbus-supply property as suggested by Rob
---
Amelie Delaunay (2):
dt-bindings: phy: add vbus-supply optional property to
phy-stm32-usbphyc
phy: stm32: manage optional vbus regulator on phy_power_on/off
.../bindings/phy/phy-stm32-usbphyc.yaml | 11 +++++++
drivers/phy/st/phy-stm32-usbphyc.c | 31 +++++++++++++++++++
2 files changed, 42 insertions(+)
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 12+ messages in thread
* [RESEND PATCH v2 0/2] STM32 USBPHYC vbus-supply property support
@ 2021-05-17 12:08 ` Amelie Delaunay
0 siblings, 0 replies; 12+ messages in thread
From: Amelie Delaunay @ 2021-05-17 12:08 UTC (permalink / raw)
To: Kishon Vijay Abraham I, Vinod Koul, Rob Herring,
Alexandre Torgue, Maxime Coquelin
Cc: linux-phy, linux-kernel, devicetree, linux-arm-kernel,
linux-stm32, Amelie Delaunay
STM32 USBPHYC provides two USB High-Speed ports which are used by controllers
with Host capabilities. That's why vbus-supply has to be supported on each
phy node.
---
Changes in v2:
- use connector node vbus-supply property as suggested by Rob
---
Amelie Delaunay (2):
dt-bindings: phy: add vbus-supply optional property to
phy-stm32-usbphyc
phy: stm32: manage optional vbus regulator on phy_power_on/off
.../bindings/phy/phy-stm32-usbphyc.yaml | 11 +++++++
drivers/phy/st/phy-stm32-usbphyc.c | 31 +++++++++++++++++++
2 files changed, 42 insertions(+)
--
2.17.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 12+ messages in thread
* [RESEND PATCH v2 1/2] dt-bindings: phy: add vbus-supply optional property to phy-stm32-usbphyc
2021-05-17 12:08 ` Amelie Delaunay
(?)
@ 2021-05-17 12:08 ` Amelie Delaunay
-1 siblings, 0 replies; 12+ messages in thread
From: Amelie Delaunay @ 2021-05-17 12:08 UTC (permalink / raw)
To: Kishon Vijay Abraham I, Vinod Koul, Rob Herring,
Alexandre Torgue, Maxime Coquelin
Cc: linux-phy, linux-kernel, devicetree, linux-arm-kernel,
linux-stm32, Amelie Delaunay
This patch adds vbus-supply optional property to phy sub-nodes using
connector node.
A regulator for USB VBUS may be needed for host mode.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
---
Changes in v2:
- add connector vbus-supply property as suggested by Rob
---
.../devicetree/bindings/phy/phy-stm32-usbphyc.yaml | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
index 018cc1246ee1..3329f1d33a4f 100644
--- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
@@ -74,6 +74,13 @@ patternProperties:
"#phy-cells":
enum: [ 0x0, 0x1 ]
+ connector:
+ type: object
+ allOf:
+ - $ref: ../connector/usb-connector.yaml
+ properties:
+ vbus-supply: true
+
allOf:
- if:
properties:
@@ -130,6 +137,10 @@ examples:
reg = <0>;
phy-supply = <&vdd_usb>;
#phy-cells = <0>;
+ connector {
+ compatible = "usb-a-connector";
+ vbus-supply = <&vbus_sw>;
+ };
};
usbphyc_port1: usb-phy@1 {
--
2.17.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [RESEND PATCH v2 1/2] dt-bindings: phy: add vbus-supply optional property to phy-stm32-usbphyc
@ 2021-05-17 12:08 ` Amelie Delaunay
0 siblings, 0 replies; 12+ messages in thread
From: Amelie Delaunay @ 2021-05-17 12:08 UTC (permalink / raw)
To: Kishon Vijay Abraham I, Vinod Koul, Rob Herring,
Alexandre Torgue, Maxime Coquelin
Cc: linux-phy, linux-kernel, devicetree, linux-arm-kernel,
linux-stm32, Amelie Delaunay
This patch adds vbus-supply optional property to phy sub-nodes using
connector node.
A regulator for USB VBUS may be needed for host mode.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
---
Changes in v2:
- add connector vbus-supply property as suggested by Rob
---
.../devicetree/bindings/phy/phy-stm32-usbphyc.yaml | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
index 018cc1246ee1..3329f1d33a4f 100644
--- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
@@ -74,6 +74,13 @@ patternProperties:
"#phy-cells":
enum: [ 0x0, 0x1 ]
+ connector:
+ type: object
+ allOf:
+ - $ref: ../connector/usb-connector.yaml
+ properties:
+ vbus-supply: true
+
allOf:
- if:
properties:
@@ -130,6 +137,10 @@ examples:
reg = <0>;
phy-supply = <&vdd_usb>;
#phy-cells = <0>;
+ connector {
+ compatible = "usb-a-connector";
+ vbus-supply = <&vbus_sw>;
+ };
};
usbphyc_port1: usb-phy@1 {
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [RESEND PATCH v2 1/2] dt-bindings: phy: add vbus-supply optional property to phy-stm32-usbphyc
@ 2021-05-17 12:08 ` Amelie Delaunay
0 siblings, 0 replies; 12+ messages in thread
From: Amelie Delaunay @ 2021-05-17 12:08 UTC (permalink / raw)
To: Kishon Vijay Abraham I, Vinod Koul, Rob Herring,
Alexandre Torgue, Maxime Coquelin
Cc: linux-phy, linux-kernel, devicetree, linux-arm-kernel,
linux-stm32, Amelie Delaunay
This patch adds vbus-supply optional property to phy sub-nodes using
connector node.
A regulator for USB VBUS may be needed for host mode.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
---
Changes in v2:
- add connector vbus-supply property as suggested by Rob
---
.../devicetree/bindings/phy/phy-stm32-usbphyc.yaml | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
index 018cc1246ee1..3329f1d33a4f 100644
--- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
@@ -74,6 +74,13 @@ patternProperties:
"#phy-cells":
enum: [ 0x0, 0x1 ]
+ connector:
+ type: object
+ allOf:
+ - $ref: ../connector/usb-connector.yaml
+ properties:
+ vbus-supply: true
+
allOf:
- if:
properties:
@@ -130,6 +137,10 @@ examples:
reg = <0>;
phy-supply = <&vdd_usb>;
#phy-cells = <0>;
+ connector {
+ compatible = "usb-a-connector";
+ vbus-supply = <&vbus_sw>;
+ };
};
usbphyc_port1: usb-phy@1 {
--
2.17.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [RESEND PATCH v2 2/2] phy: stm32: manage optional vbus regulator on phy_power_on/off
2021-05-17 12:08 ` Amelie Delaunay
(?)
@ 2021-05-17 12:08 ` Amelie Delaunay
-1 siblings, 0 replies; 12+ messages in thread
From: Amelie Delaunay @ 2021-05-17 12:08 UTC (permalink / raw)
To: Kishon Vijay Abraham I, Vinod Koul, Rob Herring,
Alexandre Torgue, Maxime Coquelin
Cc: linux-phy, linux-kernel, devicetree, linux-arm-kernel,
linux-stm32, Amelie Delaunay
This patch adds support for optional vbus regulator.
It is managed on phy_power_on/off calls and may be needed for host mode.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
---
No changes in v2.
---
drivers/phy/st/phy-stm32-usbphyc.c | 31 ++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c
index c184f4e34584..3e491dfb2525 100644
--- a/drivers/phy/st/phy-stm32-usbphyc.c
+++ b/drivers/phy/st/phy-stm32-usbphyc.c
@@ -57,6 +57,7 @@ struct pll_params {
struct stm32_usbphyc_phy {
struct phy *phy;
struct stm32_usbphyc *usbphyc;
+ struct regulator *vbus;
u32 index;
bool active;
};
@@ -291,9 +292,31 @@ static int stm32_usbphyc_phy_exit(struct phy *phy)
return stm32_usbphyc_pll_disable(usbphyc);
}
+static int stm32_usbphyc_phy_power_on(struct phy *phy)
+{
+ struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);
+
+ if (usbphyc_phy->vbus)
+ return regulator_enable(usbphyc_phy->vbus);
+
+ return 0;
+}
+
+static int stm32_usbphyc_phy_power_off(struct phy *phy)
+{
+ struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);
+
+ if (usbphyc_phy->vbus)
+ return regulator_disable(usbphyc_phy->vbus);
+
+ return 0;
+}
+
static const struct phy_ops stm32_usbphyc_phy_ops = {
.init = stm32_usbphyc_phy_init,
.exit = stm32_usbphyc_phy_exit,
+ .power_on = stm32_usbphyc_phy_power_on,
+ .power_off = stm32_usbphyc_phy_power_off,
.owner = THIS_MODULE,
};
@@ -519,6 +542,14 @@ static int stm32_usbphyc_probe(struct platform_device *pdev)
usbphyc->phys[port]->index = index;
usbphyc->phys[port]->active = false;
+ usbphyc->phys[port]->vbus = devm_regulator_get_optional(&phy->dev, "vbus");
+ if (IS_ERR(usbphyc->phys[port]->vbus)) {
+ ret = PTR_ERR(usbphyc->phys[port]->vbus);
+ if (ret == -EPROBE_DEFER)
+ goto put_child;
+ usbphyc->phys[port]->vbus = NULL;
+ }
+
port++;
}
--
2.17.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [RESEND PATCH v2 2/2] phy: stm32: manage optional vbus regulator on phy_power_on/off
@ 2021-05-17 12:08 ` Amelie Delaunay
0 siblings, 0 replies; 12+ messages in thread
From: Amelie Delaunay @ 2021-05-17 12:08 UTC (permalink / raw)
To: Kishon Vijay Abraham I, Vinod Koul, Rob Herring,
Alexandre Torgue, Maxime Coquelin
Cc: linux-phy, linux-kernel, devicetree, linux-arm-kernel,
linux-stm32, Amelie Delaunay
This patch adds support for optional vbus regulator.
It is managed on phy_power_on/off calls and may be needed for host mode.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
---
No changes in v2.
---
drivers/phy/st/phy-stm32-usbphyc.c | 31 ++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c
index c184f4e34584..3e491dfb2525 100644
--- a/drivers/phy/st/phy-stm32-usbphyc.c
+++ b/drivers/phy/st/phy-stm32-usbphyc.c
@@ -57,6 +57,7 @@ struct pll_params {
struct stm32_usbphyc_phy {
struct phy *phy;
struct stm32_usbphyc *usbphyc;
+ struct regulator *vbus;
u32 index;
bool active;
};
@@ -291,9 +292,31 @@ static int stm32_usbphyc_phy_exit(struct phy *phy)
return stm32_usbphyc_pll_disable(usbphyc);
}
+static int stm32_usbphyc_phy_power_on(struct phy *phy)
+{
+ struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);
+
+ if (usbphyc_phy->vbus)
+ return regulator_enable(usbphyc_phy->vbus);
+
+ return 0;
+}
+
+static int stm32_usbphyc_phy_power_off(struct phy *phy)
+{
+ struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);
+
+ if (usbphyc_phy->vbus)
+ return regulator_disable(usbphyc_phy->vbus);
+
+ return 0;
+}
+
static const struct phy_ops stm32_usbphyc_phy_ops = {
.init = stm32_usbphyc_phy_init,
.exit = stm32_usbphyc_phy_exit,
+ .power_on = stm32_usbphyc_phy_power_on,
+ .power_off = stm32_usbphyc_phy_power_off,
.owner = THIS_MODULE,
};
@@ -519,6 +542,14 @@ static int stm32_usbphyc_probe(struct platform_device *pdev)
usbphyc->phys[port]->index = index;
usbphyc->phys[port]->active = false;
+ usbphyc->phys[port]->vbus = devm_regulator_get_optional(&phy->dev, "vbus");
+ if (IS_ERR(usbphyc->phys[port]->vbus)) {
+ ret = PTR_ERR(usbphyc->phys[port]->vbus);
+ if (ret == -EPROBE_DEFER)
+ goto put_child;
+ usbphyc->phys[port]->vbus = NULL;
+ }
+
port++;
}
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [RESEND PATCH v2 2/2] phy: stm32: manage optional vbus regulator on phy_power_on/off
@ 2021-05-17 12:08 ` Amelie Delaunay
0 siblings, 0 replies; 12+ messages in thread
From: Amelie Delaunay @ 2021-05-17 12:08 UTC (permalink / raw)
To: Kishon Vijay Abraham I, Vinod Koul, Rob Herring,
Alexandre Torgue, Maxime Coquelin
Cc: linux-phy, linux-kernel, devicetree, linux-arm-kernel,
linux-stm32, Amelie Delaunay
This patch adds support for optional vbus regulator.
It is managed on phy_power_on/off calls and may be needed for host mode.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
---
No changes in v2.
---
drivers/phy/st/phy-stm32-usbphyc.c | 31 ++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c
index c184f4e34584..3e491dfb2525 100644
--- a/drivers/phy/st/phy-stm32-usbphyc.c
+++ b/drivers/phy/st/phy-stm32-usbphyc.c
@@ -57,6 +57,7 @@ struct pll_params {
struct stm32_usbphyc_phy {
struct phy *phy;
struct stm32_usbphyc *usbphyc;
+ struct regulator *vbus;
u32 index;
bool active;
};
@@ -291,9 +292,31 @@ static int stm32_usbphyc_phy_exit(struct phy *phy)
return stm32_usbphyc_pll_disable(usbphyc);
}
+static int stm32_usbphyc_phy_power_on(struct phy *phy)
+{
+ struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);
+
+ if (usbphyc_phy->vbus)
+ return regulator_enable(usbphyc_phy->vbus);
+
+ return 0;
+}
+
+static int stm32_usbphyc_phy_power_off(struct phy *phy)
+{
+ struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);
+
+ if (usbphyc_phy->vbus)
+ return regulator_disable(usbphyc_phy->vbus);
+
+ return 0;
+}
+
static const struct phy_ops stm32_usbphyc_phy_ops = {
.init = stm32_usbphyc_phy_init,
.exit = stm32_usbphyc_phy_exit,
+ .power_on = stm32_usbphyc_phy_power_on,
+ .power_off = stm32_usbphyc_phy_power_off,
.owner = THIS_MODULE,
};
@@ -519,6 +542,14 @@ static int stm32_usbphyc_probe(struct platform_device *pdev)
usbphyc->phys[port]->index = index;
usbphyc->phys[port]->active = false;
+ usbphyc->phys[port]->vbus = devm_regulator_get_optional(&phy->dev, "vbus");
+ if (IS_ERR(usbphyc->phys[port]->vbus)) {
+ ret = PTR_ERR(usbphyc->phys[port]->vbus);
+ if (ret == -EPROBE_DEFER)
+ goto put_child;
+ usbphyc->phys[port]->vbus = NULL;
+ }
+
port++;
}
--
2.17.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [RESEND PATCH v2 0/2] STM32 USBPHYC vbus-supply property support
2021-05-17 12:08 ` Amelie Delaunay
(?)
@ 2021-05-31 8:22 ` Vinod Koul
-1 siblings, 0 replies; 12+ messages in thread
From: Vinod Koul @ 2021-05-31 8:22 UTC (permalink / raw)
To: Amelie Delaunay
Cc: Kishon Vijay Abraham I, Rob Herring, Alexandre Torgue,
Maxime Coquelin, linux-phy, linux-kernel, devicetree,
linux-arm-kernel, linux-stm32
On 17-05-21, 14:08, Amelie Delaunay wrote:
> STM32 USBPHYC provides two USB High-Speed ports which are used by controllers
> with Host capabilities. That's why vbus-supply has to be supported on each
> phy node.
Applied, thanks
--
~Vinod
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [RESEND PATCH v2 0/2] STM32 USBPHYC vbus-supply property support
@ 2021-05-31 8:22 ` Vinod Koul
0 siblings, 0 replies; 12+ messages in thread
From: Vinod Koul @ 2021-05-31 8:22 UTC (permalink / raw)
To: Amelie Delaunay
Cc: Kishon Vijay Abraham I, Rob Herring, Alexandre Torgue,
Maxime Coquelin, linux-phy, linux-kernel, devicetree,
linux-arm-kernel, linux-stm32
On 17-05-21, 14:08, Amelie Delaunay wrote:
> STM32 USBPHYC provides two USB High-Speed ports which are used by controllers
> with Host capabilities. That's why vbus-supply has to be supported on each
> phy node.
Applied, thanks
--
~Vinod
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [RESEND PATCH v2 0/2] STM32 USBPHYC vbus-supply property support
@ 2021-05-31 8:22 ` Vinod Koul
0 siblings, 0 replies; 12+ messages in thread
From: Vinod Koul @ 2021-05-31 8:22 UTC (permalink / raw)
To: Amelie Delaunay
Cc: Kishon Vijay Abraham I, Rob Herring, Alexandre Torgue,
Maxime Coquelin, linux-phy, linux-kernel, devicetree,
linux-arm-kernel, linux-stm32
On 17-05-21, 14:08, Amelie Delaunay wrote:
> STM32 USBPHYC provides two USB High-Speed ports which are used by controllers
> with Host capabilities. That's why vbus-supply has to be supported on each
> phy node.
Applied, thanks
--
~Vinod
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2021-05-31 8:23 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-17 12:08 [RESEND PATCH v2 0/2] STM32 USBPHYC vbus-supply property support Amelie Delaunay
2021-05-17 12:08 ` Amelie Delaunay
2021-05-17 12:08 ` Amelie Delaunay
2021-05-17 12:08 ` [RESEND PATCH v2 1/2] dt-bindings: phy: add vbus-supply optional property to phy-stm32-usbphyc Amelie Delaunay
2021-05-17 12:08 ` Amelie Delaunay
2021-05-17 12:08 ` Amelie Delaunay
2021-05-17 12:08 ` [RESEND PATCH v2 2/2] phy: stm32: manage optional vbus regulator on phy_power_on/off Amelie Delaunay
2021-05-17 12:08 ` Amelie Delaunay
2021-05-17 12:08 ` Amelie Delaunay
2021-05-31 8:22 ` [RESEND PATCH v2 0/2] STM32 USBPHYC vbus-supply property support Vinod Koul
2021-05-31 8:22 ` Vinod Koul
2021-05-31 8:22 ` Vinod Koul
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.