* cpufreq-info SIGKILL or freeze unkillable in read(.../cpu0/cpufreq/stats/time_in_state)
@ 2021-05-24 12:51 Jonas Bechtel
0 siblings, 0 replies; only message in thread
From: Jonas Bechtel @ 2021-05-24 12:51 UTC (permalink / raw)
To: cpufreq
[-- Attachment #1: Type: text/plain, Size: 28908 bytes --]
Hi there,
here's some strange bug. Bug is reproducible:
BIOS: Set AMD overclocking configuration to Auto
Linux: /proc/cpuinfo and cpufreq-info show 1000 MHz on idle
Reboot
BIOS: Set AMD overclocking configuration to x7 (1400 MHz)
Linux: /proc/cpuinfo shows 1000 MHz on idle
Start Browser
Start cpufreq-info: output see attachment 01
screen flickers 1x, one black block ~9x15px appears in upper left corner
cpu load ceases (browser loaded)
Start cpufreq-info: output see attachment 02
screen flickers 1x, screen becomes normal again
cpufreq-info is in an endless loop, unkillable
strace on cpu-freq is unkillable, also
Interaction with some programs become very slow (need to wait for file system access?) but xterm with new bash prompt opens/closes in normal speed
System cann't reboot but SysRq 'b' is working
Reboot
Start cpufreq-info: strace see attachment 03
Same effects as 01
Start cpufreq-info: strace see attachment 04
Same effects as 02, but after call 04 the black block keeps flickering
CPU AMD Athlon64 X2
Kernel 4.4.0, 64 bit
cpufreq-info 32 bit 008-1.1 (Debian)
Screen driver /usr/lib/xorg/modules/libfb.so for X 1.20.4
Kernel modules radeon and radeonfb loaded (Most probably radeon is active, radeonfb inactive)
All attachments (01, 02, 03, 04) are also copied in this message.
I hope this bug report is right in this list. I hope it helps. I don't need a reply for my daily work (just leaving "overclocking" set to "Auto") but I want to leave the comment here that I have the impression that the Linux support of old hardware is ceasing (e.g. Irda, graphics) - some things are working with old kernels and don't anymore with newer kernels (drivers still present but don't fit to each other).
Best regards
Jonas Bechtel
== 01 ==
Bitte melden Sie Fehler an cpufreq@vger.kernel.org.
analysiere CPU 0:
Treiber: powernow-k8
Folgende CPUs laufen mit der gleichen Hardware-Taktfrequenz: 0 1
Die Taktfrequenz folgender CPUs werden per Software koordiniert: 0 1
Maximale Dauer eines Taktfrequenzwechsels: 109 us.
Hardwarebedingte Grenzen der Taktfrequenz: 1000 MHz - 2.50 GHz
mögliche Taktfrequenzen: 2.50 GHz, 2.40 GHz, 2.20 GHz, 2.00 GHz, 1.80 GHz, 1000 MHz
mögliche Regler: ondemand, performance
momentane Taktik: die Frequenz soll innerhalb 1000 MHz und 2.50 GHz.
liegen. Der Regler "ondemand" kann frei entscheiden,
welche Taktfrequenz innerhalb dieser Grenze verwendet wird.
momentane Taktfrequenz ist 2.40 GHz.
Getötet
== 02 ==
cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009
Bitte melden Sie Fehler an cpufreq@vger.kernel.org.
analysiere CPU 0:
Treiber: powernow-k8
Folgende CPUs laufen mit der gleichen Hardware-Taktfrequenz: 0 1
Die Taktfrequenz folgender CPUs werden per Software koordiniert: 0 1
Maximale Dauer eines Taktfrequenzwechsels: 109 us.
Hardwarebedingte Grenzen der Taktfrequenz: 1000 MHz - 2.50 GHz
mögliche Taktfrequenzen: 2.50 GHz, 2.40 GHz, 2.20 GHz, 2.00 GHz, 1.80 GHz, 1000 MHz
mögliche Regler: ondemand, performance
momentane Taktik: die Frequenz soll innerhalb 1000 MHz und 2.50 GHz.
liegen. Der Regler "ondemand" kann frei entscheiden,
welche Taktfrequenz innerhalb dieser Grenze verwendet wird.
momentane Taktfrequenz ist 1000 MHz.
[Hanging unkillable here]
== 03 ==
execve("/usr/bin/cpufreq-info", ["cpufreq-info"], 0xfffd36c0 /* 36 vars */) = 0
brk(NULL) = 0x565b7000
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
mmap2(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xf770f000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls/i686/sse2", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls/i686", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls/sse2", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/i686/sse2", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/i686", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/sse2", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib", {st_mode=S_IFDIR|0755, st_size=248, ...}) = 0
openat(AT_FDCWD, "tls/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=220379, ...}) = 0
mmap2(NULL, 220379, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf76d9000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "/usr/lib/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0@#\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=26160, ...}) = 0
mmap2(NULL, 28884, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf76d1000
mmap2(0xf76d3000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf76d3000
mmap2(0xf76d5000, 8192, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0xf76d5000
mmap2(0xf76d7000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5000) = 0xf76d7000
close(3) = 0
openat(AT_FDCWD, "[redacted]/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/i686/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/i686/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "/lib/i386-linux-gnu/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
read(3, "\177ELF\1\1\1\3\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300\254\1\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1947056, ...}) = 0
mmap2(NULL, 1955712, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf74f3000
mprotect(0xf750c000, 1830912, PROT_NONE) = 0
mmap2(0xf750c000, 1368064, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x19000) = 0xf750c000
mmap2(0xf765a000, 458752, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x167000) = 0xf765a000
mmap2(0xf76cb000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1d7000) = 0xf76cb000
mmap2(0xf76ce000, 10112, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xf76ce000
close(3) = 0
set_thread_area({entry_number=-1, base_addr=0xf7710500, limit=0x0fffff, seg_32bit=1, contents=0, read_exec_only=0, limit_in_pages=1, seg_not_present=0, useable=1}) = 0 (entry_number=12)
mprotect(0xf76cb000, 8192, PROT_READ) = 0
mprotect(0xf76d7000, 4096, PROT_READ) = 0
mprotect(0x565b5000, 4096, PROT_READ) = 0
mprotect(0xf773c000, 4096, PROT_READ) = 0
munmap(0xf76d9000, 220379) = 0
brk(NULL) = 0x565b7000
brk(0x565d8000) = 0x565d8000
brk(0x565d9000) = 0x565d9000
openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=9814000, ...}) = 0
mmap2(NULL, 2097152, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf72f3000
mmap2(NULL, 2596864, PROT_READ, MAP_PRIVATE, 3, 0xb8000) = 0xf7079000
close(3) = 0
fstat64(1, {st_mode=S_IFCHR|0600, st_rdev=makedev(0x88, 0), ...}) = 0
write(1, "cpufrequtils 008: cpufreq-info ("..., 63) = 63
openat(AT_FDCWD, "/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=2995, ...}) = 0
read(3, "# Locale name alias data base.\n#"..., 4096) = 2995
read(3, "", 4096) = 0
close(3) = 0
openat(AT_FDCWD, "/usr/share/locale/de/LC_MESSAGES/cpufrequtils.mo", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=10540, ...}) = 0
mmap2(NULL, 10540, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf770c000
close(3) = 0
openat(AT_FDCWD, "/usr/lib/i386-linux-gnu/gconv/gconv-modules.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=26400, ...}) = 0
mmap2(NULL, 26400, PROT_READ, MAP_SHARED, 3, 0) = 0xf7705000
close(3) = 0
openat(AT_FDCWD, "/usr/lib/i386-linux-gnu/gconv/ISO8859-1.so", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\200\20\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=13736, ...}) = 0
mmap2(NULL, 16420, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf7700000
mmap2(0xf7701000, 4096, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0xf7701000
mmap2(0xf7702000, 4096, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf7702000
mmap2(0xf7703000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf7703000
close(3) = 0
mprotect(0xf7703000, 4096, PROT_READ) = 0
write(1, "Bitte melden Sie Fehler an cpufr"..., 52) = 52
openat(AT_FDCWD, "/proc/stat", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
read(3, "cpu 1071 0 847 11936 5524 0 15 "..., 1024) = 1024
read(3, "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 "..., 1024) = 263
read(3, "", 1024) = 0
close(3) = 0
stat64("/sys/devices/system/cpu/cpu0/", {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
stat64("/sys/devices/system/cpu/cpu0/", {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
write(1, "analysiere CPU 0:\n", 18) = 18
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq", O_RDONLY) = 3
read(3, "1000000\n", 4095) = 8
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq", O_RDONLY) = -1 EACCES (Keine Berechtigung)
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver", O_RDONLY) = 3
read(3, "powernow-k8\n", 4095) = 12
close(3) = 0
write(1, " Treiber: powernow-k8\n", 23) = 23
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/related_cpus", O_RDONLY) = 3
read(3, "0 1\n", 4095) = 4
close(3) = 0
write(1, " Folgende CPUs laufen mit der g"..., 67) = 67
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/affected_cpus", O_RDONLY) = 3
read(3, "0 1\n", 4095) = 4
close(3) = 0
write(1, " Die Taktfrequenz folgender CPU"..., 71) = 71
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_transition_latency", O_RDONLY) = 3
read(3, "109000\n", 4095) = 7
close(3) = 0
write(1, " Maximale Dauer eines Taktfrequ"..., 53) = 53
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq", O_RDONLY) = 3
read(3, "1000000\n", 4095) = 8
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq", O_RDONLY) = 3
read(3, "2500000\n", 4095) = 8
close(3) = 0
write(1, " Hardwarebedingte Grenzen der T"..., 65) = 65
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies", O_RDONLY) = 3
read(3, "2500000 2400000 2200000 2000000 "..., 4095) = 49
close(3) = 0
write(1, " m\303\266gliche Taktfrequenzen: 2.50"..., 87) = 87
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors", O_RDONLY) = 3
read(3, "ondemand performance \n", 4095) = 22
close(3) = 0
write(1, " m\303\266gliche Regler: ondemand, pe"..., 42) = 42
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor", O_RDONLY) = 3
read(3, "ondemand\n", 4095) = 9
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq", O_RDONLY) = 3
read(3, "1000000\n", 4095) = 8
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq", O_RDONLY) = 3
read(3, "2500000\n", 4095) = 8
close(3) = 0
write(1, " momentane Taktik: die Frequenz"..., 71) = 71
write(1, " liegen. Der "..., 153) = 153
write(1, " momentane Taktfrequenz ist 100"..., 39) = 39
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state", O_RDONLY) = 3
read(3, <unfinished ...>) = ?
+++ killed by SIGKILL +++
== 04 ==
execve("/usr/bin/cpufreq-info", ["cpufreq-info"], 0xffcc8e90 /* 36 vars */) = 0
brk(NULL) = 0x5658c000
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
mmap2(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xf771d000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls/i686/sse2", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls/i686", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls/sse2", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/i686/sse2", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/i686", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/sse2", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib", {st_mode=S_IFDIR|0755, st_size=248, ...}) = 0
openat(AT_FDCWD, "tls/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=220379, ...}) = 0
mmap2(NULL, 220379, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf76e7000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "/usr/lib/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0@#\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=26160, ...}) = 0
mmap2(NULL, 28884, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf76df000
mmap2(0xf76e1000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf76e1000
mmap2(0xf76e3000, 8192, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0xf76e3000
mmap2(0xf76e5000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5000) = 0xf76e5000
close(3) = 0
openat(AT_FDCWD, "[redacted]/lib/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/i686/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/i686/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "/lib/i386-linux-gnu/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
read(3, "\177ELF\1\1\1\3\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300\254\1\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1947056, ...}) = 0
mmap2(NULL, 1955712, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf7501000
mprotect(0xf751a000, 1830912, PROT_NONE) = 0
mmap2(0xf751a000, 1368064, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x19000) = 0xf751a000
mmap2(0xf7668000, 458752, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x167000) = 0xf7668000
mmap2(0xf76d9000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1d7000) = 0xf76d9000
mmap2(0xf76dc000, 10112, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xf76dc000
close(3) = 0
set_thread_area({entry_number=-1, base_addr=0xf771e500, limit=0x0fffff, seg_32bit=1, contents=0, read_exec_only=0, limit_in_pages=1, seg_not_present=0, useable=1}) = 0 (entry_number=12)
mprotect(0xf76d9000, 8192, PROT_READ) = 0
mprotect(0xf76e5000, 4096, PROT_READ) = 0
mprotect(0x5658a000, 4096, PROT_READ) = 0
mprotect(0xf774a000, 4096, PROT_READ) = 0
munmap(0xf76e7000, 220379) = 0
brk(NULL) = 0x5658c000
brk(0x565ad000) = 0x565ad000
brk(0x565ae000) = 0x565ae000
openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=9814000, ...}) = 0
mmap2(NULL, 2097152, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf7301000
mmap2(NULL, 2596864, PROT_READ, MAP_PRIVATE, 3, 0xb8000) = 0xf7087000
close(3) = 0
fstat64(1, {st_mode=S_IFCHR|0600, st_rdev=makedev(0x88, 0), ...}) = 0
write(1, "cpufrequtils 008: cpufreq-info ("..., 63) = 63
openat(AT_FDCWD, "/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=2995, ...}) = 0
read(3, "# Locale name alias data base.\n#"..., 4096) = 2995
read(3, "", 4096) = 0
close(3) = 0
openat(AT_FDCWD, "/usr/share/locale/de/LC_MESSAGES/cpufrequtils.mo", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=10540, ...}) = 0
mmap2(NULL, 10540, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf771a000
close(3) = 0
openat(AT_FDCWD, "/usr/lib/i386-linux-gnu/gconv/gconv-modules.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=26400, ...}) = 0
mmap2(NULL, 26400, PROT_READ, MAP_SHARED, 3, 0) = 0xf7713000
close(3) = 0
openat(AT_FDCWD, "/usr/lib/i386-linux-gnu/gconv/ISO8859-1.so", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\200\20\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=13736, ...}) = 0
mmap2(NULL, 16420, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf770e000
mmap2(0xf770f000, 4096, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0xf770f000
mmap2(0xf7710000, 4096, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf7710000
mmap2(0xf7711000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf7711000
close(3) = 0
mprotect(0xf7711000, 4096, PROT_READ) = 0
write(1, "Bitte melden Sie Fehler an cpufr"..., 52) = 52
openat(AT_FDCWD, "/proc/stat", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
read(3, "cpu 1374 0 870 24647 5573 0 16 "..., 1024) = 1024
read(3, "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 "..., 1024) = 266
read(3, "", 1024) = 0
close(3) = 0
stat64("/sys/devices/system/cpu/cpu0/", {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
stat64("/sys/devices/system/cpu/cpu0/", {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
write(1, "analysiere CPU 0:\n", 18) = 18
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq", O_RDONLY) = 3
read(3, "1000000\n", 4095) = 8
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq", O_RDONLY) = -1 EACCES (Keine Berechtigung)
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver", O_RDONLY) = 3
read(3, "powernow-k8\n", 4095) = 12
close(3) = 0
write(1, " Treiber: powernow-k8\n", 23) = 23
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/related_cpus", O_RDONLY) = 3
read(3, "0 1\n", 4095) = 4
close(3) = 0
write(1, " Folgende CPUs laufen mit der g"..., 67) = 67
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/affected_cpus", O_RDONLY) = 3
read(3, "0 1\n", 4095) = 4
close(3) = 0
write(1, " Die Taktfrequenz folgender CPU"..., 71) = 71
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_transition_latency", O_RDONLY) = 3
read(3, "109000\n", 4095) = 7
close(3) = 0
write(1, " Maximale Dauer eines Taktfrequ"..., 53) = 53
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq", O_RDONLY) = 3
read(3, "1000000\n", 4095) = 8
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq", O_RDONLY) = 3
read(3, "2500000\n", 4095) = 8
close(3) = 0
write(1, " Hardwarebedingte Grenzen der T"..., 65) = 65
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies", O_RDONLY) = 3
read(3, "2500000 2400000 2200000 2000000 "..., 4095) = 49
close(3) = 0
write(1, " m\303\266gliche Taktfrequenzen: 2.50"..., 87) = 87
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors", O_RDONLY) = 3
read(3, "ondemand performance \n", 4095) = 22
close(3) = 0
write(1, " m\303\266gliche Regler: ondemand, pe"..., 42) = 42
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor", O_RDONLY) = 3
read(3, "ondemand\n", 4095) = 9
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq", O_RDONLY) = 3
read(3, "1000000\n", 4095) = 8
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq", O_RDONLY) = 3
read(3, "2500000\n", 4095) = 8
close(3) = 0
write(1, " momentane Taktik: die Frequenz"..., 71) = 71
write(1, " liegen. Der "..., 153) = 153
write(1, " momentane Taktfrequenz ist 100"..., 39) = 39
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state", O_RDONLY) = 3
read(3,
Bits & Bäume Dresden, Tour de Natur, GRÜNE LIGA, Konglomerat e. V., ADFC, (ex-)tuuwi, Hochschulgruppe Rad, Institut für Bahntechnik
Schlafende Projekte: CityConcierge, IKaRad, TerKur
Neueste Idee: Radfernbahn Berlin-Dresden, Dresden-Leipzig -> radfernbahn.de
& CityConcierge 4 Corona - http://jbechtel.de/site/sonstiges/covid19/CCfC/
[-- Attachment #2: Bug_cpufreq-info--01_killed.txt --]
[-- Type: text/plain, Size: 764 bytes --]
Bitte melden Sie Fehler an cpufreq@vger.kernel.org.
analysiere CPU 0:
Treiber: powernow-k8
Folgende CPUs laufen mit der gleichen Hardware-Taktfrequenz: 0 1
Die Taktfrequenz folgender CPUs werden per Software koordiniert: 0 1
Maximale Dauer eines Taktfrequenzwechsels: 109 us.
Hardwarebedingte Grenzen der Taktfrequenz: 1000 MHz - 2.50 GHz
mögliche Taktfrequenzen: 2.50 GHz, 2.40 GHz, 2.20 GHz, 2.00 GHz, 1.80 GHz, 1000 MHz
mögliche Regler: ondemand, performance
momentane Taktik: die Frequenz soll innerhalb 1000 MHz und 2.50 GHz.
liegen. Der Regler "ondemand" kann frei entscheiden,
welche Taktfrequenz innerhalb dieser Grenze verwendet wird.
momentane Taktfrequenz ist 2.40 GHz.
Getötet
[-- Attachment #3: Bug_cpufreq-info--02_hang.txt --]
[-- Type: text/plain, Size: 845 bytes --]
cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009
Bitte melden Sie Fehler an cpufreq@vger.kernel.org.
analysiere CPU 0:
Treiber: powernow-k8
Folgende CPUs laufen mit der gleichen Hardware-Taktfrequenz: 0 1
Die Taktfrequenz folgender CPUs werden per Software koordiniert: 0 1
Maximale Dauer eines Taktfrequenzwechsels: 109 us.
Hardwarebedingte Grenzen der Taktfrequenz: 1000 MHz - 2.50 GHz
mögliche Taktfrequenzen: 2.50 GHz, 2.40 GHz, 2.20 GHz, 2.00 GHz, 1.80 GHz, 1000 MHz
mögliche Regler: ondemand, performance
momentane Taktik: die Frequenz soll innerhalb 1000 MHz und 2.50 GHz.
liegen. Der Regler "ondemand" kann frei entscheiden,
welche Taktfrequenz innerhalb dieser Grenze verwendet wird.
momentane Taktfrequenz ist 1000 MHz.
[Hanging unkillable here]
[-- Attachment #4: Bug_cpufreq-info--03_killed_strace_redacted.txt --]
[-- Type: text/plain, Size: 12418 bytes --]
execve("/usr/bin/cpufreq-info", ["cpufreq-info"], 0xfffd36c0 /* 36 vars */) = 0
brk(NULL) = 0x565b7000
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
mmap2(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xf770f000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls/i686/sse2", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls/i686", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls/sse2", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/i686/sse2", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/i686", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/sse2", 0xffcc4ed0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib", {st_mode=S_IFDIR|0755, st_size=248, ...}) = 0
openat(AT_FDCWD, "tls/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=220379, ...}) = 0
mmap2(NULL, 220379, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf76d9000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "/usr/lib/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0@#\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=26160, ...}) = 0
mmap2(NULL, 28884, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf76d1000
mmap2(0xf76d3000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf76d3000
mmap2(0xf76d5000, 8192, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0xf76d5000
mmap2(0xf76d7000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5000) = 0xf76d7000
close(3) = 0
openat(AT_FDCWD, "[redacted]/lib/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/i686/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/i686/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "/lib/i386-linux-gnu/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
read(3, "\177ELF\1\1\1\3\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300\254\1\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1947056, ...}) = 0
mmap2(NULL, 1955712, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf74f3000
mprotect(0xf750c000, 1830912, PROT_NONE) = 0
mmap2(0xf750c000, 1368064, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x19000) = 0xf750c000
mmap2(0xf765a000, 458752, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x167000) = 0xf765a000
mmap2(0xf76cb000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1d7000) = 0xf76cb000
mmap2(0xf76ce000, 10112, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xf76ce000
close(3) = 0
set_thread_area({entry_number=-1, base_addr=0xf7710500, limit=0x0fffff, seg_32bit=1, contents=0, read_exec_only=0, limit_in_pages=1, seg_not_present=0, useable=1}) = 0 (entry_number=12)
mprotect(0xf76cb000, 8192, PROT_READ) = 0
mprotect(0xf76d7000, 4096, PROT_READ) = 0
mprotect(0x565b5000, 4096, PROT_READ) = 0
mprotect(0xf773c000, 4096, PROT_READ) = 0
munmap(0xf76d9000, 220379) = 0
brk(NULL) = 0x565b7000
brk(0x565d8000) = 0x565d8000
brk(0x565d9000) = 0x565d9000
openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=9814000, ...}) = 0
mmap2(NULL, 2097152, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf72f3000
mmap2(NULL, 2596864, PROT_READ, MAP_PRIVATE, 3, 0xb8000) = 0xf7079000
close(3) = 0
fstat64(1, {st_mode=S_IFCHR|0600, st_rdev=makedev(0x88, 0), ...}) = 0
write(1, "cpufrequtils 008: cpufreq-info ("..., 63) = 63
openat(AT_FDCWD, "/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=2995, ...}) = 0
read(3, "# Locale name alias data base.\n#"..., 4096) = 2995
read(3, "", 4096) = 0
close(3) = 0
openat(AT_FDCWD, "/usr/share/locale/de/LC_MESSAGES/cpufrequtils.mo", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=10540, ...}) = 0
mmap2(NULL, 10540, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf770c000
close(3) = 0
openat(AT_FDCWD, "/usr/lib/i386-linux-gnu/gconv/gconv-modules.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=26400, ...}) = 0
mmap2(NULL, 26400, PROT_READ, MAP_SHARED, 3, 0) = 0xf7705000
close(3) = 0
openat(AT_FDCWD, "/usr/lib/i386-linux-gnu/gconv/ISO8859-1.so", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\200\20\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=13736, ...}) = 0
mmap2(NULL, 16420, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf7700000
mmap2(0xf7701000, 4096, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0xf7701000
mmap2(0xf7702000, 4096, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf7702000
mmap2(0xf7703000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf7703000
close(3) = 0
mprotect(0xf7703000, 4096, PROT_READ) = 0
write(1, "Bitte melden Sie Fehler an cpufr"..., 52) = 52
openat(AT_FDCWD, "/proc/stat", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
read(3, "cpu 1071 0 847 11936 5524 0 15 "..., 1024) = 1024
read(3, "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 "..., 1024) = 263
read(3, "", 1024) = 0
close(3) = 0
stat64("/sys/devices/system/cpu/cpu0/", {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
stat64("/sys/devices/system/cpu/cpu0/", {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
write(1, "analysiere CPU 0:\n", 18) = 18
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq", O_RDONLY) = 3
read(3, "1000000\n", 4095) = 8
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq", O_RDONLY) = -1 EACCES (Keine Berechtigung)
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver", O_RDONLY) = 3
read(3, "powernow-k8\n", 4095) = 12
close(3) = 0
write(1, " Treiber: powernow-k8\n", 23) = 23
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/related_cpus", O_RDONLY) = 3
read(3, "0 1\n", 4095) = 4
close(3) = 0
write(1, " Folgende CPUs laufen mit der g"..., 67) = 67
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/affected_cpus", O_RDONLY) = 3
read(3, "0 1\n", 4095) = 4
close(3) = 0
write(1, " Die Taktfrequenz folgender CPU"..., 71) = 71
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_transition_latency", O_RDONLY) = 3
read(3, "109000\n", 4095) = 7
close(3) = 0
write(1, " Maximale Dauer eines Taktfrequ"..., 53) = 53
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq", O_RDONLY) = 3
read(3, "1000000\n", 4095) = 8
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq", O_RDONLY) = 3
read(3, "2500000\n", 4095) = 8
close(3) = 0
write(1, " Hardwarebedingte Grenzen der T"..., 65) = 65
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies", O_RDONLY) = 3
read(3, "2500000 2400000 2200000 2000000 "..., 4095) = 49
close(3) = 0
write(1, " m\303\266gliche Taktfrequenzen: 2.50"..., 87) = 87
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors", O_RDONLY) = 3
read(3, "ondemand performance \n", 4095) = 22
close(3) = 0
write(1, " m\303\266gliche Regler: ondemand, pe"..., 42) = 42
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor", O_RDONLY) = 3
read(3, "ondemand\n", 4095) = 9
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq", O_RDONLY) = 3
read(3, "1000000\n", 4095) = 8
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq", O_RDONLY) = 3
read(3, "2500000\n", 4095) = 8
close(3) = 0
write(1, " momentane Taktik: die Frequenz"..., 71) = 71
write(1, " liegen. Der "..., 153) = 153
write(1, " momentane Taktfrequenz ist 100"..., 39) = 39
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state", O_RDONLY) = 3
read(3, <unfinished ...>) = ?
+++ killed by SIGKILL +++
[-- Attachment #5: Bug_cpufreq-info--04_hang_strace_redacted.txt --]
[-- Type: text/plain, Size: 12356 bytes --]
execve("/usr/bin/cpufreq-info", ["cpufreq-info"], 0xffcc8e90 /* 36 vars */) = 0
brk(NULL) = 0x5658c000
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
mmap2(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xf771d000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls/i686/sse2", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls/i686", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls/sse2", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/tls/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/tls", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/i686/sse2", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/i686", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib/sse2", 0xffda9ac0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "[redacted]/lib/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
stat64("[redacted]/lib", {st_mode=S_IFDIR|0755, st_size=248, ...}) = 0
openat(AT_FDCWD, "tls/i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "sse2/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=220379, ...}) = 0
mmap2(NULL, 220379, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf76e7000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "/usr/lib/libcpufreq.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0@#\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=26160, ...}) = 0
mmap2(NULL, 28884, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf76df000
mmap2(0xf76e1000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf76e1000
mmap2(0xf76e3000, 8192, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0xf76e3000
mmap2(0xf76e5000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5000) = 0xf76e5000
close(3) = 0
openat(AT_FDCWD, "[redacted]/lib/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/i686/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/i686/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "tls/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "i686/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "sse2/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
openat(AT_FDCWD, "/lib/i386-linux-gnu/libc.so.6", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
read(3, "\177ELF\1\1\1\3\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300\254\1\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1947056, ...}) = 0
mmap2(NULL, 1955712, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf7501000
mprotect(0xf751a000, 1830912, PROT_NONE) = 0
mmap2(0xf751a000, 1368064, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x19000) = 0xf751a000
mmap2(0xf7668000, 458752, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x167000) = 0xf7668000
mmap2(0xf76d9000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1d7000) = 0xf76d9000
mmap2(0xf76dc000, 10112, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xf76dc000
close(3) = 0
set_thread_area({entry_number=-1, base_addr=0xf771e500, limit=0x0fffff, seg_32bit=1, contents=0, read_exec_only=0, limit_in_pages=1, seg_not_present=0, useable=1}) = 0 (entry_number=12)
mprotect(0xf76d9000, 8192, PROT_READ) = 0
mprotect(0xf76e5000, 4096, PROT_READ) = 0
mprotect(0x5658a000, 4096, PROT_READ) = 0
mprotect(0xf774a000, 4096, PROT_READ) = 0
munmap(0xf76e7000, 220379) = 0
brk(NULL) = 0x5658c000
brk(0x565ad000) = 0x565ad000
brk(0x565ae000) = 0x565ae000
openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=9814000, ...}) = 0
mmap2(NULL, 2097152, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf7301000
mmap2(NULL, 2596864, PROT_READ, MAP_PRIVATE, 3, 0xb8000) = 0xf7087000
close(3) = 0
fstat64(1, {st_mode=S_IFCHR|0600, st_rdev=makedev(0x88, 0), ...}) = 0
write(1, "cpufrequtils 008: cpufreq-info ("..., 63) = 63
openat(AT_FDCWD, "/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=2995, ...}) = 0
read(3, "# Locale name alias data base.\n#"..., 4096) = 2995
read(3, "", 4096) = 0
close(3) = 0
openat(AT_FDCWD, "/usr/share/locale/de/LC_MESSAGES/cpufrequtils.mo", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=10540, ...}) = 0
mmap2(NULL, 10540, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf771a000
close(3) = 0
openat(AT_FDCWD, "/usr/lib/i386-linux-gnu/gconv/gconv-modules.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=26400, ...}) = 0
mmap2(NULL, 26400, PROT_READ, MAP_SHARED, 3, 0) = 0xf7713000
close(3) = 0
openat(AT_FDCWD, "/usr/lib/i386-linux-gnu/gconv/ISO8859-1.so", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\200\20\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=13736, ...}) = 0
mmap2(NULL, 16420, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf770e000
mmap2(0xf770f000, 4096, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0xf770f000
mmap2(0xf7710000, 4096, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf7710000
mmap2(0xf7711000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xf7711000
close(3) = 0
mprotect(0xf7711000, 4096, PROT_READ) = 0
write(1, "Bitte melden Sie Fehler an cpufr"..., 52) = 52
openat(AT_FDCWD, "/proc/stat", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
read(3, "cpu 1374 0 870 24647 5573 0 16 "..., 1024) = 1024
read(3, "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 "..., 1024) = 266
read(3, "", 1024) = 0
close(3) = 0
stat64("/sys/devices/system/cpu/cpu0/", {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
stat64("/sys/devices/system/cpu/cpu0/", {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
write(1, "analysiere CPU 0:\n", 18) = 18
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq", O_RDONLY) = 3
read(3, "1000000\n", 4095) = 8
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq", O_RDONLY) = -1 EACCES (Keine Berechtigung)
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver", O_RDONLY) = 3
read(3, "powernow-k8\n", 4095) = 12
close(3) = 0
write(1, " Treiber: powernow-k8\n", 23) = 23
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/related_cpus", O_RDONLY) = 3
read(3, "0 1\n", 4095) = 4
close(3) = 0
write(1, " Folgende CPUs laufen mit der g"..., 67) = 67
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/affected_cpus", O_RDONLY) = 3
read(3, "0 1\n", 4095) = 4
close(3) = 0
write(1, " Die Taktfrequenz folgender CPU"..., 71) = 71
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_transition_latency", O_RDONLY) = 3
read(3, "109000\n", 4095) = 7
close(3) = 0
write(1, " Maximale Dauer eines Taktfrequ"..., 53) = 53
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq", O_RDONLY) = 3
read(3, "1000000\n", 4095) = 8
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq", O_RDONLY) = 3
read(3, "2500000\n", 4095) = 8
close(3) = 0
write(1, " Hardwarebedingte Grenzen der T"..., 65) = 65
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies", O_RDONLY) = 3
read(3, "2500000 2400000 2200000 2000000 "..., 4095) = 49
close(3) = 0
write(1, " m\303\266gliche Taktfrequenzen: 2.50"..., 87) = 87
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors", O_RDONLY) = 3
read(3, "ondemand performance \n", 4095) = 22
close(3) = 0
write(1, " m\303\266gliche Regler: ondemand, pe"..., 42) = 42
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor", O_RDONLY) = 3
read(3, "ondemand\n", 4095) = 9
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq", O_RDONLY) = 3
read(3, "1000000\n", 4095) = 8
close(3) = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq", O_RDONLY) = 3
read(3, "2500000\n", 4095) = 8
close(3) = 0
write(1, " momentane Taktik: die Frequenz"..., 71) = 71
write(1, " liegen. Der "..., 153) = 153
write(1, " momentane Taktfrequenz ist 100"..., 39) = 39
openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state", O_RDONLY) = 3
read(3,
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2021-05-24 12:51 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-24 12:51 cpufreq-info SIGKILL or freeze unkillable in read(.../cpu0/cpufreq/stats/time_in_state) Jonas Bechtel
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.