[PATCH 4.9 00/36] 4.9.270-rc1 review

[PATCH 4.9 00/36] 4.9.270-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.9.270 release.
There are 36 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.270-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.9.270-rc1

Colin Ian King <colin.king@canonical.com>
    iio: tsl2583: Fix division by a zero lux_val

Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
    tty: vt: always invoke vc->vc_sw->con_resize callback

Maciej W. Rozycki <macro@orcam.me.uk>
    vt: Fix character height handling with VT_RESIZEX

Maciej W. Rozycki <macro@orcam.me.uk>
    vgacon: Record video mode changes with VT_RESIZEX

Igor Matheus Andrade Torrente <igormtorrente@gmail.com>
    video: hgafb: fix potential NULL pointer dereference

Tom Seewald <tseewald@gmail.com>
    qlcnic: Add null check after calling netdev_alloc_skb

Phillip Potter <phil@philpotter.co.uk>
    leds: lp5523: check return value of lp5xx_read and jump to cleanup code

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    net: rtlwifi: properly check for alloc_workqueue() failure

Anirudh Rayabharam <mail@anirudhrb.com>
    net: stmicro: handle clk_prepare() failure during init

Du Cheng <ducheng2@gmail.com>
    ethernet: sun: niu: fix missing checks of niu_pci_eeprom_read()

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "niu: fix missing checks of niu_pci_eeprom_read"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "qlcnic: Avoid potential NULL pointer dereference"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "rtlwifi: fix a potential NULL pointer dereference"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    cdrom: gdrom: initialize global variable at init time

Atul Gopinathan <atulgopinathan@gmail.com>
    cdrom: gdrom: deallocate struct gdrom_unit fields in remove_gdrom

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "gdrom: fix a memory leak bug"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "ecryptfs: replace BUG_ON with error handling code"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "video: imsttfb: fix potential NULL pointer dereferences"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "hwmon: (lm80) fix a missing check of bus read in lm80 probe"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "leds: lp5523: fix a missing check of return value of lp55xx_read"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "net: stmicro: fix a missing check of clk_prepare"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "video: hgafb: fix potential NULL pointer dereference"

Mikulas Patocka <mpatocka@redhat.com>
    dm snapshot: fix crash with transient storage and zero chunk size

Mikulas Patocka <mpatocka@redhat.com>
    dm snapshot: fix a crash when an origin has no snapshots

Jan Beulich <jbeulich@suse.com>
    xen-pciback: reconfigure also from backend watch handler

Anirudh Rayabharam <mail@anirudhrb.com>
    rapidio: handle create_workqueue() failure

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "rapidio: fix a NULL pointer dereference when create_workqueue() fails"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "ALSA: sb8: add a check for request_region"

Takashi Sakamoto <o-takashi@sakamocchi.jp>
    ALSA: bebob/oxfw: fix Kconfig entry for Mackie d.2 Pro

Takashi Iwai <tiwai@suse.de>
    ALSA: usb-audio: Validate MS endpoint descriptors

Takashi Iwai <tiwai@suse.de>
    ALSA: line6: Fix racy initialization of LINE6 MIDI

Ronnie Sahlberg <lsahlber@redhat.com>
    cifs: fix memory leak in smb2_copychunk_range

Oleg Nesterov <oleg@redhat.com>
    ptrace: make ptrace() fail if the tracee changed its pid unexpectedly

Zhen Lei <thunder.leizhen@huawei.com>
    scsi: qla2xxx: Fix error return code in qla82xx_write_flash_dword()

Leon Romanovsky <leonro@nvidia.com>
    RDMA/rxe: Clear all QP fields if creation failed

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    openrisc: Fix a memory leak


-------------

Diffstat:

 Makefile                                           |  4 +-
 arch/openrisc/kernel/setup.c                       |  2 +
 drivers/cdrom/gdrom.c                              | 13 +++--
 drivers/hwmon/lm80.c                               | 11 +----
 drivers/infiniband/sw/rxe/rxe_qp.c                 |  7 +++
 drivers/leds/leds-lp5523.c                         |  2 +-
 drivers/md/dm-snap.c                               |  6 +--
 .../net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c    |  3 +-
 drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c  |  8 ++--
 drivers/net/ethernet/sun/niu.c                     | 32 ++++++++-----
 drivers/net/wireless/realtek/rtlwifi/base.c        | 19 ++++----
 drivers/rapidio/rio_cm.c                           | 17 ++++---
 drivers/scsi/qla2xxx/qla_nx.c                      |  3 +-
 drivers/staging/iio/light/tsl2583.c                |  9 ++++
 drivers/tty/vt/vt.c                                |  2 +-
 drivers/tty/vt/vt_ioctl.c                          |  6 +--
 drivers/video/console/fbcon.c                      |  2 +-
 drivers/video/console/vgacon.c                     | 56 ++++++++++++----------
 drivers/video/fbdev/hgafb.c                        | 21 ++++----
 drivers/video/fbdev/imsttfb.c                      |  5 --
 drivers/xen/xen-pciback/xenbus.c                   | 22 +++++++--
 fs/cifs/smb2ops.c                                  |  2 +
 fs/ecryptfs/crypto.c                               |  6 +--
 include/linux/console_struct.h                     |  1 +
 kernel/ptrace.c                                    | 18 ++++++-
 sound/firewire/Kconfig                             |  4 +-
 sound/firewire/bebob/bebob.c                       |  2 +-
 sound/firewire/oxfw/oxfw.c                         |  1 -
 sound/isa/sb/sb8.c                                 |  4 --
 sound/usb/line6/driver.c                           |  4 ++
 sound/usb/line6/pod.c                              |  5 --
 sound/usb/line6/variax.c                           |  6 ---
 sound/usb/midi.c                                   |  4 ++
 33 files changed, 180 insertions(+), 127 deletions(-)

[PATCH 4.9 01/36] openrisc: Fix a memory leak

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit c019d92457826bb7b2091c86f36adb5de08405f9 ]

'setup_find_cpu_node()' take a reference on the node it returns.
This reference must be decremented when not needed anymore, or there will
be a leak.

Add the missing 'of_node_put(cpu)'.

Note that 'setup_cpuinfo()' that also calls this function already has a
correct 'of_node_put(cpu)' at its end.

Fixes: 9d02a4283e9c ("OpenRISC: Boot code")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/openrisc/kernel/setup.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/openrisc/kernel/setup.c b/arch/openrisc/kernel/setup.c
index b4ed8b36e078..e5f5b69a7b7b 100644
--- a/arch/openrisc/kernel/setup.c
+++ b/arch/openrisc/kernel/setup.c
@@ -278,6 +278,8 @@ void calibrate_delay(void)
 	pr_cont("%lu.%02lu BogoMIPS (lpj=%lu)\n",
 		loops_per_jiffy / (500000 / HZ),
 		(loops_per_jiffy / (5000 / HZ)) % 100, loops_per_jiffy);
+
+	of_node_put(cpu);
 }
 
 void __init setup_arch(char **cmdline_p)
-- 
2.30.2

[PATCH 4.9 02/36] RDMA/rxe: Clear all QP fields if creation failed

[Greg Kroah-Hartman]

From: Leon Romanovsky <leonro@nvidia.com>

[ Upstream commit 67f29896fdc83298eed5a6576ff8f9873f709228 ]

rxe_qp_do_cleanup() relies on valid pointer values in QP for the properly
created ones, but in case rxe_qp_from_init() failed it was filled with
garbage and caused tot the following error.

  refcount_t: underflow; use-after-free.
  WARNING: CPU: 1 PID: 12560 at lib/refcount.c:28 refcount_warn_saturate+0x1d1/0x1e0 lib/refcount.c:28
  Modules linked in:
  CPU: 1 PID: 12560 Comm: syz-executor.4 Not tainted 5.12.0-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  RIP: 0010:refcount_warn_saturate+0x1d1/0x1e0 lib/refcount.c:28
  Code: e9 db fe ff ff 48 89 df e8 2c c2 ea fd e9 8a fe ff ff e8 72 6a a7 fd 48 c7 c7 e0 b2 c1 89 c6 05 dc 3a e6 09 01 e8 ee 74 fb 04 <0f> 0b e9 af fe ff ff 0f 1f 84 00 00 00 00 00 41 56 41 55 41 54 55
  RSP: 0018:ffffc900097ceba8 EFLAGS: 00010286
  RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
  RDX: 0000000000040000 RSI: ffffffff815bb075 RDI: fffff520012f9d67
  RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000
  R10: ffffffff815b4eae R11: 0000000000000000 R12: ffff8880322a4800
  R13: ffff8880322a4940 R14: ffff888033044e00 R15: 0000000000000000
  FS:  00007f6eb2be3700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007fdbe5d41000 CR3: 000000001d181000 CR4: 00000000001506e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   __refcount_sub_and_test include/linux/refcount.h:283 [inline]
   __refcount_dec_and_test include/linux/refcount.h:315 [inline]
   refcount_dec_and_test include/linux/refcount.h:333 [inline]
   kref_put include/linux/kref.h:64 [inline]
   rxe_qp_do_cleanup+0x96f/0xaf0 drivers/infiniband/sw/rxe/rxe_qp.c:805
   execute_in_process_context+0x37/0x150 kernel/workqueue.c:3327
   rxe_elem_release+0x9f/0x180 drivers/infiniband/sw/rxe/rxe_pool.c:391
   kref_put include/linux/kref.h:65 [inline]
   rxe_create_qp+0x2cd/0x310 drivers/infiniband/sw/rxe/rxe_verbs.c:425
   _ib_create_qp drivers/infiniband/core/core_priv.h:331 [inline]
   ib_create_named_qp+0x2ad/0x1370 drivers/infiniband/core/verbs.c:1231
   ib_create_qp include/rdma/ib_verbs.h:3644 [inline]
   create_mad_qp+0x177/0x2d0 drivers/infiniband/core/mad.c:2920
   ib_mad_port_open drivers/infiniband/core/mad.c:3001 [inline]
   ib_mad_init_device+0xd6f/0x1400 drivers/infiniband/core/mad.c:3092
   add_client_context+0x405/0x5e0 drivers/infiniband/core/device.c:717
   enable_device_and_get+0x1cd/0x3b0 drivers/infiniband/core/device.c:1331
   ib_register_device drivers/infiniband/core/device.c:1413 [inline]
   ib_register_device+0x7c7/0xa50 drivers/infiniband/core/device.c:1365
   rxe_register_device+0x3d5/0x4a0 drivers/infiniband/sw/rxe/rxe_verbs.c:1147
   rxe_add+0x12fe/0x16d0 drivers/infiniband/sw/rxe/rxe.c:247
   rxe_net_add+0x8c/0xe0 drivers/infiniband/sw/rxe/rxe_net.c:503
   rxe_newlink drivers/infiniband/sw/rxe/rxe.c:269 [inline]
   rxe_newlink+0xb7/0xe0 drivers/infiniband/sw/rxe/rxe.c:250
   nldev_newlink+0x30e/0x550 drivers/infiniband/core/nldev.c:1555
   rdma_nl_rcv_msg+0x36d/0x690 drivers/infiniband/core/netlink.c:195
   rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline]
   rdma_nl_rcv+0x2ee/0x430 drivers/infiniband/core/netlink.c:259
   netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
   netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
   netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
   sock_sendmsg_nosec net/socket.c:654 [inline]
   sock_sendmsg+0xcf/0x120 net/socket.c:674
   ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
   ___sys_sendmsg+0xf3/0x170 net/socket.c:2404
   __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
   do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47
   entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/7bf8d548764d406dbbbaf4b574960ebfd5af8387.1620717918.git.leonro@nvidia.com
Reported-by: syzbot+36a7f280de4e11c6f04e@syzkaller.appspotmail.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/sw/rxe/rxe_qp.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/infiniband/sw/rxe/rxe_qp.c b/drivers/infiniband/sw/rxe/rxe_qp.c
index 186da467060c..5fa1442fd4f1 100644
--- a/drivers/infiniband/sw/rxe/rxe_qp.c
+++ b/drivers/infiniband/sw/rxe/rxe_qp.c
@@ -258,6 +258,7 @@ static int rxe_qp_init_req(struct rxe_dev *rxe, struct rxe_qp *qp,
 	if (err) {
 		vfree(qp->sq.queue->buf);
 		kfree(qp->sq.queue);
+		qp->sq.queue = NULL;
 		return err;
 	}
 
@@ -315,6 +316,7 @@ static int rxe_qp_init_resp(struct rxe_dev *rxe, struct rxe_qp *qp,
 		if (err) {
 			vfree(qp->rq.queue->buf);
 			kfree(qp->rq.queue);
+			qp->rq.queue = NULL;
 			return err;
 		}
 	}
@@ -374,6 +376,11 @@ int rxe_qp_from_init(struct rxe_dev *rxe, struct rxe_qp *qp, struct rxe_pd *pd,
 err2:
 	rxe_queue_cleanup(qp->sq.queue);
 err1:
+	qp->pd = NULL;
+	qp->rcq = NULL;
+	qp->scq = NULL;
+	qp->srq = NULL;
+
 	if (srq)
 		rxe_drop_ref(srq);
 	rxe_drop_ref(scq);
-- 
2.30.2

[PATCH 4.9 03/36] scsi: qla2xxx: Fix error return code in qla82xx_write_flash_dword()

[Greg Kroah-Hartman]

From: Zhen Lei <thunder.leizhen@huawei.com>

[ Upstream commit 5cb289bf2d7c34ca1abd794ce116c4f19185a1d4 ]

Fix to return a negative error code from the error handling case instead of
0 as done elsewhere in this function.

Link: https://lore.kernel.org/r/20210514090952.6715-1-thunder.leizhen@huawei.com
Fixes: a9083016a531 ("[SCSI] qla2xxx: Add ISP82XX support.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_nx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 104e13ae3428..9ec18463b452 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -1102,7 +1102,8 @@ qla82xx_write_flash_dword(struct qla_hw_data *ha, uint32_t flashaddr,
 		return ret;
 	}
 
-	if (qla82xx_flash_set_write_enable(ha))
+	ret = qla82xx_flash_set_write_enable(ha);
+	if (ret < 0)
 		goto done_write;
 
 	qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_WDATA, data);
-- 
2.30.2

[PATCH 4.9 04/36] ptrace: make ptrace() fail if the tracee changed its pid unexpectedly

[Greg Kroah-Hartman]

From: Oleg Nesterov <oleg@redhat.com>

[ Upstream commit dbb5afad100a828c97e012c6106566d99f041db6 ]

Suppose we have 2 threads, the group-leader L and a sub-theread T,
both parked in ptrace_stop(). Debugger tries to resume both threads
and does

	ptrace(PTRACE_CONT, T);
	ptrace(PTRACE_CONT, L);

If the sub-thread T execs in between, the 2nd PTRACE_CONT doesn not
resume the old leader L, it resumes the post-exec thread T which was
actually now stopped in PTHREAD_EVENT_EXEC. In this case the
PTHREAD_EVENT_EXEC event is lost, and the tracer can't know that the
tracee changed its pid.

This patch makes ptrace() fail in this case until debugger does wait()
and consumes PTHREAD_EVENT_EXEC which reports old_pid. This affects all
ptrace requests except the "asynchronous" PTRACE_INTERRUPT/KILL.

The patch doesn't add the new PTRACE_ option to not complicate the API,
and I _hope_ this won't cause any noticeable regression:

	- If debugger uses PTRACE_O_TRACEEXEC and the thread did an exec
	  and the tracer does a ptrace request without having consumed
	  the exec event, it's 100% sure that the thread the ptracer
	  thinks it is targeting does not exist anymore, or isn't the
	  same as the one it thinks it is targeting.

	- To some degree this patch adds nothing new. In the scenario
	  above ptrace(L) can fail with -ESRCH if it is called after the
	  execing sub-thread wakes the leader up and before it "steals"
	  the leader's pid.

Test-case:

	#include <stdio.h>
	#include <unistd.h>
	#include <signal.h>
	#include <sys/ptrace.h>
	#include <sys/wait.h>
	#include <errno.h>
	#include <pthread.h>
	#include <assert.h>

	void *tf(void *arg)
	{
		execve("/usr/bin/true", NULL, NULL);
		assert(0);

		return NULL;
	}

	int main(void)
	{
		int leader = fork();
		if (!leader) {
			kill(getpid(), SIGSTOP);

			pthread_t th;
			pthread_create(&th, NULL, tf, NULL);
			for (;;)
				pause();

			return 0;
		}

		waitpid(leader, NULL, WSTOPPED);

		ptrace(PTRACE_SEIZE, leader, 0,
				PTRACE_O_TRACECLONE | PTRACE_O_TRACEEXEC);
		waitpid(leader, NULL, 0);

		ptrace(PTRACE_CONT, leader, 0,0);
		waitpid(leader, NULL, 0);

		int status, thread = waitpid(-1, &status, 0);
		assert(thread > 0 && thread != leader);
		assert(status == 0x80137f);

		ptrace(PTRACE_CONT, thread, 0,0);
		/*
		 * waitid() because waitpid(leader, &status, WNOWAIT) does not
		 * report status. Why ????
		 *
		 * Why WEXITED? because we have another kernel problem connected
		 * to mt-exec.
		 */
		siginfo_t info;
		assert(waitid(P_PID, leader, &info, WSTOPPED|WEXITED|WNOWAIT) == 0);
		assert(info.si_pid == leader && info.si_status == 0x0405);

		/* OK, it sleeps in ptrace(PTRACE_EVENT_EXEC == 0x04) */
		assert(ptrace(PTRACE_CONT, leader, 0,0) == -1);
		assert(errno == ESRCH);

		assert(leader == waitpid(leader, &status, WNOHANG));
		assert(status == 0x04057f);

		assert(ptrace(PTRACE_CONT, leader, 0,0) == 0);

		return 0;
	}

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Simon Marchi <simon.marchi@efficios.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Pedro Alves <palves@redhat.com>
Acked-by: Simon Marchi <simon.marchi@efficios.com>
Acked-by: Jan Kratochvil <jan.kratochvil@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/ptrace.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index ea3370e205fb..4f10223bc7b0 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -159,6 +159,21 @@ void __ptrace_unlink(struct task_struct *child)
 	spin_unlock(&child->sighand->siglock);
 }
 
+static bool looks_like_a_spurious_pid(struct task_struct *task)
+{
+	if (task->exit_code != ((PTRACE_EVENT_EXEC << 8) | SIGTRAP))
+		return false;
+
+	if (task_pid_vnr(task) == task->ptrace_message)
+		return false;
+	/*
+	 * The tracee changed its pid but the PTRACE_EVENT_EXEC event
+	 * was not wait()'ed, most probably debugger targets the old
+	 * leader which was destroyed in de_thread().
+	 */
+	return true;
+}
+
 /* Ensure that nothing can wake it up, even SIGKILL */
 static bool ptrace_freeze_traced(struct task_struct *task)
 {
@@ -169,7 +184,8 @@ static bool ptrace_freeze_traced(struct task_struct *task)
 		return ret;
 
 	spin_lock_irq(&task->sighand->siglock);
-	if (task_is_traced(task) && !__fatal_signal_pending(task)) {
+	if (task_is_traced(task) && !looks_like_a_spurious_pid(task) &&
+	    !__fatal_signal_pending(task)) {
 		task->state = __TASK_TRACED;
 		ret = true;
 	}
-- 
2.30.2

[PATCH 4.9 05/36] cifs: fix memory leak in smb2_copychunk_range

[Greg Kroah-Hartman]

From: Ronnie Sahlberg <lsahlber@redhat.com>

commit d201d7631ca170b038e7f8921120d05eec70d7c5 upstream.

When using smb2_copychunk_range() for large ranges we will
run through several iterations of a loop calling SMB2_ioctl()
but never actually free the returned buffer except for the final
iteration.
This leads to memory leaks everytime a large copychunk is requested.

Fixes: 9bf0c9cd4314 ("CIFS: Fix SMB2/SMB3 Copy offload support (refcopy) for large files")
Cc: <stable@vger.kernel.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/cifs/smb2ops.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -629,6 +629,8 @@ smb2_clone_range(const unsigned int xid,
 			cpu_to_le32(min_t(u32, len, tcon->max_bytes_chunk));
 
 		/* Request server copy to target from src identified by key */
+		kfree(retbuf);
+		retbuf = NULL;
 		rc = SMB2_ioctl(xid, tcon, trgtfile->fid.persistent_fid,
 			trgtfile->fid.volatile_fid, FSCTL_SRV_COPYCHUNK_WRITE,
 			true /* is_fsctl */, (char *)pcchunk,

[PATCH 4.9 06/36] ALSA: line6: Fix racy initialization of LINE6 MIDI

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 05ca447630334c323c9e2b788b61133ab75d60d3 upstream.

The initialization of MIDI devices that are found on some LINE6
drivers are currently done in a racy way; namely, the MIDI buffer
instance is allocated and initialized in each private_init callback
while the communication with the interface is already started via
line6_init_cap_control() call before that point.  This may lead to
Oops in line6_data_received() when a spurious event is received, as
reported by syzkaller.

This patch moves the MIDI initialization to line6_init_cap_control()
as well instead of the too-lately-called private_init for avoiding the
race.  Also this reduces slightly more lines, so it's a win-win
change.

Reported-by: syzbot+0d2b3feb0a2887862e06@syzkallerlkml..appspotmail.com
Link: https://lore.kernel.org/r/000000000000a4be9405c28520de@google.com
Link: https://lore.kernel.org/r/20210517132725.GA50495@hyeyoo
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210518083939.1927-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/line6/driver.c |    4 ++++
 sound/usb/line6/pod.c    |    5 -----
 sound/usb/line6/variax.c |    6 ------
 3 files changed, 4 insertions(+), 11 deletions(-)

--- a/sound/usb/line6/driver.c
+++ b/sound/usb/line6/driver.c
@@ -687,6 +687,10 @@ static int line6_init_cap_control(struct
 		line6->buffer_message = kmalloc(LINE6_MIDI_MESSAGE_MAXLEN, GFP_KERNEL);
 		if (!line6->buffer_message)
 			return -ENOMEM;
+
+		ret = line6_init_midi(line6);
+		if (ret < 0)
+			return ret;
 	} else {
 		ret = line6_hwdep_init(line6);
 		if (ret < 0)
--- a/sound/usb/line6/pod.c
+++ b/sound/usb/line6/pod.c
@@ -421,11 +421,6 @@ static int pod_init(struct usb_line6 *li
 	if (err < 0)
 		return err;
 
-	/* initialize MIDI subsystem: */
-	err = line6_init_midi(line6);
-	if (err < 0)
-		return err;
-
 	/* initialize PCM subsystem: */
 	err = line6_init_pcm(line6, &pod_pcm_properties);
 	if (err < 0)
--- a/sound/usb/line6/variax.c
+++ b/sound/usb/line6/variax.c
@@ -217,7 +217,6 @@ static int variax_init(struct usb_line6
 		       const struct usb_device_id *id)
 {
 	struct usb_line6_variax *variax = (struct usb_line6_variax *) line6;
-	int err;
 
 	line6->process_message = line6_variax_process_message;
 	line6->disconnect = line6_variax_disconnect;
@@ -233,11 +232,6 @@ static int variax_init(struct usb_line6
 	if (variax->buffer_activate == NULL)
 		return -ENOMEM;
 
-	/* initialize MIDI subsystem: */
-	err = line6_init_midi(&variax->line6);
-	if (err < 0)
-		return err;
-
 	/* initiate startup procedure: */
 	variax_startup1(variax);
 	return 0;

[PATCH 4.9 07/36] ALSA: usb-audio: Validate MS endpoint descriptors

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit e84749a78dc82bc545f12ce009e3dbcc2c5a8a91 upstream.

snd_usbmidi_get_ms_info() may access beyond the border when a
malformed descriptor is passed.  This patch adds the sanity checks of
the given MS endpoint descriptors, and skips invalid ones.

Reported-by: syzbot+6bb23a5d5548b93c94aa@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210510150659.17710-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/midi.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -1867,8 +1867,12 @@ static int snd_usbmidi_get_ms_info(struc
 		ms_ep = find_usb_ms_endpoint_descriptor(hostep);
 		if (!ms_ep)
 			continue;
+		if (ms_ep->bLength <= sizeof(*ms_ep))
+			continue;
 		if (ms_ep->bNumEmbMIDIJack > 0x10)
 			continue;
+		if (ms_ep->bLength < sizeof(*ms_ep) + ms_ep->bNumEmbMIDIJack)
+			continue;
 		if (usb_endpoint_dir_out(ep)) {
 			if (endpoints[epidx].out_ep) {
 				if (++epidx >= MIDI_MAX_ENDPOINTS) {

[PATCH 4.9 08/36] ALSA: bebob/oxfw: fix Kconfig entry for Mackie d.2 Pro

[Greg Kroah-Hartman]

From: Takashi Sakamoto <o-takashi@sakamocchi.jp>

commit 0edabdfe89581669609eaac5f6a8d0ae6fe95e7f upstream.

Mackie d.2 has an extension card for IEEE 1394 communication, which uses
BridgeCo DM1000 ASIC. On the other hand, Mackie d.4 Pro has built-in
function for IEEE 1394 communication by Oxford Semiconductor OXFW971,
according to schematic diagram available in Mackie website. Although I
misunderstood that Mackie d.2 Pro would be also a model with OXFW971,
it's wrong. Mackie d.2 Pro is a model which includes the extension card
as factory settings.

This commit fixes entries in Kconfig and comment in ALSA OXFW driver.

Cc: <stable@vger.kernel.org>
Fixes: fd6f4b0dc167 ("ALSA: bebob: Add skelton for BeBoB based devices")
Fixes: ec4dba5053e1 ("ALSA: oxfw: Add support for Behringer/Mackie devices")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210513125652.110249-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/firewire/Kconfig       |    4 ++--
 sound/firewire/bebob/bebob.c |    2 +-
 sound/firewire/oxfw/oxfw.c   |    1 -
 3 files changed, 3 insertions(+), 4 deletions(-)

--- a/sound/firewire/Kconfig
+++ b/sound/firewire/Kconfig
@@ -36,7 +36,7 @@ config SND_OXFW
 	   * Mackie(Loud) Onyx-i series (former models)
 	   * Mackie(Loud) Onyx Satellite
 	   * Mackie(Loud) Tapco Link.Firewire
-	   * Mackie(Loud) d.2 pro/d.4 pro
+	   * Mackie(Loud) d.4 pro
 	   * Mackie(Loud) U.420/U.420d
 	   * TASCAM FireOne
 	   * Stanton Controllers & Systems 1 Deck/Mixer
@@ -82,7 +82,7 @@ config SND_BEBOB
 	  * PreSonus FIREBOX/FIREPOD/FP10/Inspire1394
 	  * BridgeCo RDAudio1/Audio5
 	  * Mackie Onyx 1220/1620/1640 (FireWire I/O Card)
-	  * Mackie d.2 (FireWire Option)
+	  * Mackie d.2 (FireWire Option) and d.2 Pro
 	  * Stanton FinalScratch 2 (ScratchAmp)
 	  * Tascam IF-FW/DM
 	  * Behringer XENIX UFX 1204/1604
--- a/sound/firewire/bebob/bebob.c
+++ b/sound/firewire/bebob/bebob.c
@@ -414,7 +414,7 @@ static const struct ieee1394_device_id b
 	SND_BEBOB_DEV_ENTRY(VEN_BRIDGECO, 0x00010049, &spec_normal),
 	/* Mackie, Onyx 1220/1620/1640 (Firewire I/O Card) */
 	SND_BEBOB_DEV_ENTRY(VEN_MACKIE2, 0x00010065, &spec_normal),
-	/* Mackie, d.2 (Firewire Option) */
+	// Mackie, d.2 (Firewire option card) and d.2 Pro (the card is built-in).
 	SND_BEBOB_DEV_ENTRY(VEN_MACKIE1, 0x00010067, &spec_normal),
 	/* Stanton, ScratchAmp */
 	SND_BEBOB_DEV_ENTRY(VEN_STANTON, 0x00000001, &spec_normal),
--- a/sound/firewire/oxfw/oxfw.c
+++ b/sound/firewire/oxfw/oxfw.c
@@ -405,7 +405,6 @@ static const struct ieee1394_device_id o
 	 *  Onyx-i series (former models):	0x081216
 	 *  Mackie Onyx Satellite:		0x00200f
 	 *  Tapco LINK.firewire 4x6:		0x000460
-	 *  d.2 pro:				Unknown
 	 *  d.4 pro:				Unknown
 	 *  U.420:				Unknown
 	 *  U.420d:				Unknown

[PATCH 4.9 09/36] Revert "ALSA: sb8: add a check for request_region"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 94f88309f201821073f57ae6005caefa61bf7b7e upstream.

This reverts commit dcd0feac9bab901d5739de51b3f69840851f8919.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

The original commit message for this change was incorrect as the code
path can never result in a NULL dereference, alluding to the fact that
whatever tool was used to "find this" is broken.  It's just an optional
resource reservation, so removing this check is fine.

Cc: Kangjie Lu <kjlu@umn.edu>
Acked-by: Takashi Iwai <tiwai@suse.de>
Fixes: dcd0feac9bab ("ALSA: sb8: add a check for request_region")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-35-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/isa/sb/sb8.c |    4 ----
 1 file changed, 4 deletions(-)

--- a/sound/isa/sb/sb8.c
+++ b/sound/isa/sb/sb8.c
@@ -111,10 +111,6 @@ static int snd_sb8_probe(struct device *
 
 	/* block the 0x388 port to avoid PnP conflicts */
 	acard->fm_res = request_region(0x388, 4, "SoundBlaster FM");
-	if (!acard->fm_res) {
-		err = -EBUSY;
-		goto _err;
-	}
 
 	if (port[dev] != SNDRV_AUTO_PORT) {
 		if ((err = snd_sbdsp_create(card, port[dev], irq[dev],

[PATCH 4.9 10/36] Revert "rapidio: fix a NULL pointer dereference when create_workqueue() fails"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5e68b86c7b7c059c0f0ec4bf8adabe63f84a61eb upstream.

This reverts commit 23015b22e47c5409620b1726a677d69e5cd032ba.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

The original commit has a memory leak on the error path here, it does
not clean up everything properly.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 23015b22e47c ("rapidio: fix a NULL pointer dereference when create_workqueue() fails")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-45-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rapidio/rio_cm.c |    8 --------
 1 file changed, 8 deletions(-)

--- a/drivers/rapidio/rio_cm.c
+++ b/drivers/rapidio/rio_cm.c
@@ -2147,14 +2147,6 @@ static int riocm_add_mport(struct device
 	mutex_init(&cm->rx_lock);
 	riocm_rx_fill(cm, RIOCM_RX_RING_SIZE);
 	cm->rx_wq = create_workqueue(DRV_NAME "/rxq");
-	if (!cm->rx_wq) {
-		riocm_error("failed to allocate IBMBOX_%d on %s",
-			    cmbox, mport->name);
-		rio_release_outb_mbox(mport, cmbox);
-		kfree(cm);
-		return -ENOMEM;
-	}
-
 	INIT_WORK(&cm->rx_work, rio_ibmsg_handler);
 
 	cm->tx_slot = 0;

[PATCH 4.9 11/36] rapidio: handle create_workqueue() failure

[Greg Kroah-Hartman]

From: Anirudh Rayabharam <mail@anirudhrb.com>

commit 69ce3ae36dcb03cdf416b0862a45369ddbf50fdf upstream.

In case create_workqueue() fails, release all resources and return -ENOMEM
to caller to avoid potential NULL pointer deref later. Move up the
create_workequeue() call to return early and avoid unwinding the call to
riocm_rx_fill().

Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-46-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rapidio/rio_cm.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/rapidio/rio_cm.c
+++ b/drivers/rapidio/rio_cm.c
@@ -2136,6 +2136,14 @@ static int riocm_add_mport(struct device
 		return -ENODEV;
 	}
 
+	cm->rx_wq = create_workqueue(DRV_NAME "/rxq");
+	if (!cm->rx_wq) {
+		rio_release_inb_mbox(mport, cmbox);
+		rio_release_outb_mbox(mport, cmbox);
+		kfree(cm);
+		return -ENOMEM;
+	}
+
 	/*
 	 * Allocate and register inbound messaging buffers to be ready
 	 * to receive channel and system management requests
@@ -2146,7 +2154,6 @@ static int riocm_add_mport(struct device
 	cm->rx_slots = RIOCM_RX_RING_SIZE;
 	mutex_init(&cm->rx_lock);
 	riocm_rx_fill(cm, RIOCM_RX_RING_SIZE);
-	cm->rx_wq = create_workqueue(DRV_NAME "/rxq");
 	INIT_WORK(&cm->rx_work, rio_ibmsg_handler);
 
 	cm->tx_slot = 0;

[PATCH 4.9 12/36] xen-pciback: reconfigure also from backend watch handler

[Greg Kroah-Hartman]

From: Jan Beulich <jbeulich@suse.com>

commit c81d3d24602540f65256f98831d0a25599ea6b87 upstream.

When multiple PCI devices get assigned to a guest right at boot, libxl
incrementally populates the backend tree. The writes for the first of
the devices trigger the backend watch. In turn xen_pcibk_setup_backend()
will set the XenBus state to Initialised, at which point no further
reconfigures would happen unless a device got hotplugged. Arrange for
reconfigure to also get triggered from the backend watch handler.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/2337cbd6-94b9-4187-9862-c03ea12e0c61@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/xen/xen-pciback/xenbus.c |   22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

--- a/drivers/xen/xen-pciback/xenbus.c
+++ b/drivers/xen/xen-pciback/xenbus.c
@@ -357,7 +357,8 @@ out:
 	return err;
 }
 
-static int xen_pcibk_reconfigure(struct xen_pcibk_device *pdev)
+static int xen_pcibk_reconfigure(struct xen_pcibk_device *pdev,
+				 enum xenbus_state state)
 {
 	int err = 0;
 	int num_devs;
@@ -371,9 +372,7 @@ static int xen_pcibk_reconfigure(struct
 	dev_dbg(&pdev->xdev->dev, "Reconfiguring device ...\n");
 
 	mutex_lock(&pdev->dev_lock);
-	/* Make sure we only reconfigure once */
-	if (xenbus_read_driver_state(pdev->xdev->nodename) !=
-	    XenbusStateReconfiguring)
+	if (xenbus_read_driver_state(pdev->xdev->nodename) != state)
 		goto out;
 
 	err = xenbus_scanf(XBT_NIL, pdev->xdev->nodename, "num_devs", "%d",
@@ -500,6 +499,10 @@ static int xen_pcibk_reconfigure(struct
 		}
 	}
 
+	if (state != XenbusStateReconfiguring)
+		/* Make sure we only reconfigure once. */
+		goto out;
+
 	err = xenbus_switch_state(pdev->xdev, XenbusStateReconfigured);
 	if (err) {
 		xenbus_dev_fatal(pdev->xdev, err,
@@ -525,7 +528,7 @@ static void xen_pcibk_frontend_changed(s
 		break;
 
 	case XenbusStateReconfiguring:
-		xen_pcibk_reconfigure(pdev);
+		xen_pcibk_reconfigure(pdev, XenbusStateReconfiguring);
 		break;
 
 	case XenbusStateConnected:
@@ -664,6 +667,15 @@ static void xen_pcibk_be_watch(struct xe
 		xen_pcibk_setup_backend(pdev);
 		break;
 
+	case XenbusStateInitialised:
+		/*
+		 * We typically move to Initialised when the first device was
+		 * added. Hence subsequent devices getting added may need
+		 * reconfiguring.
+		 */
+		xen_pcibk_reconfigure(pdev, XenbusStateInitialised);
+		break;
+
 	default:
 		break;
 	}

[PATCH 4.9 13/36] dm snapshot: fix a crash when an origin has no snapshots

[Greg Kroah-Hartman]

From: Mikulas Patocka <mpatocka@redhat.com>

commit 7ee06ddc4038f936b0d4459d37a7d4d844fb03db upstream.

If an origin target has no snapshots, o->split_boundary is set to 0.
This causes BUG_ON(sectors <= 0) in block/bio.c:bio_split().

Fix this by initializing chunk_size, and in turn split_boundary, to
rounddown_pow_of_two(UINT_MAX) -- the largest power of two that fits
into "unsigned" type.

Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/dm-snap.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/md/dm-snap.c
+++ b/drivers/md/dm-snap.c
@@ -788,12 +788,11 @@ static int dm_add_exception(void *contex
 static uint32_t __minimum_chunk_size(struct origin *o)
 {
 	struct dm_snapshot *snap;
-	unsigned chunk_size = 0;
+	unsigned chunk_size = rounddown_pow_of_two(UINT_MAX);
 
 	if (o)
 		list_for_each_entry(snap, &o->snapshots, list)
-			chunk_size = min_not_zero(chunk_size,
-						  snap->store->chunk_size);
+			chunk_size = min(chunk_size, snap->store->chunk_size);
 
 	return (uint32_t) chunk_size;
 }

[PATCH 4.9 14/36] dm snapshot: fix crash with transient storage and zero chunk size

[Greg Kroah-Hartman]

From: Mikulas Patocka <mpatocka@redhat.com>

commit c699a0db2d62e3bbb7f0bf35c87edbc8d23e3062 upstream.

The following commands will crash the kernel:

modprobe brd rd_size=1048576
dmsetup create o --table "0 `blockdev --getsize /dev/ram0` snapshot-origin /dev/ram0"
dmsetup create s --table "0 `blockdev --getsize /dev/ram0` snapshot /dev/ram0 /dev/ram1 N 0"

The reason is that when we test for zero chunk size, we jump to the label
bad_read_metadata without setting the "r" variable. The function
snapshot_ctr destroys all the structures and then exits with "r == 0". The
kernel then crashes because it falsely believes that snapshot_ctr
succeeded.

In order to fix the bug, we set the variable "r" to -EINVAL.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/dm-snap.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/md/dm-snap.c
+++ b/drivers/md/dm-snap.c
@@ -1263,6 +1263,7 @@ static int snapshot_ctr(struct dm_target
 
 	if (!s->store->chunk_size) {
 		ti->error = "Chunk size not set";
+		r = -EINVAL;
 		goto bad_read_metadata;
 	}
 

[PATCH 4.9 15/36] Revert "video: hgafb: fix potential NULL pointer dereference"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 58c0cc2d90f1e37c4eb63ae7f164c83830833f78 upstream.

This reverts commit ec7f6aad57ad29e4e66cc2e18e1e1599ddb02542.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

This patch "looks" correct, but the driver keeps on running and will
fail horribly right afterward if this error condition ever trips.

So points for trying to resolve an issue, but a huge NEGATIVE value for
providing a "fake" fix for the problem as nothing actually got resolved
at all.  I'll go fix this up properly...

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Aditya Pakki <pakki001@umn.edu>
Cc: Ferenc Bakonyi <fero@drama.obuda.kando.hu>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Fixes: ec7f6aad57ad ("video: hgafb: fix potential NULL pointer dereference")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-39-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/fbdev/hgafb.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/video/fbdev/hgafb.c
+++ b/drivers/video/fbdev/hgafb.c
@@ -285,8 +285,6 @@ static int hga_card_detect(void)
 	hga_vram_len  = 0x08000;
 
 	hga_vram = ioremap(0xb0000, hga_vram_len);
-	if (!hga_vram)
-		goto error;
 
 	if (request_region(0x3b0, 12, "hgafb"))
 		release_io_ports = 1;

[PATCH 4.9 16/36] Revert "net: stmicro: fix a missing check of clk_prepare"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bee1b0511844c8c79fccf1f2b13472393b6b91f7 upstream.

This reverts commit f86a3b83833e7cfe558ca4d70b64ebc48903efec.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

The original commit causes a memory leak when it is trying to claim it
is properly handling errors.  Revert this change and fix it up properly
in a follow-on commit.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: David S. Miller <davem@davemloft.net>
Fixes: f86a3b83833e ("net: stmicro: fix a missing check of clk_prepare")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-21-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
@@ -59,9 +59,7 @@ static int sun7i_gmac_init(struct platfo
 		gmac->clk_enabled = 1;
 	} else {
 		clk_set_rate(gmac->tx_clk, SUN7I_GMAC_MII_RATE);
-		ret = clk_prepare(gmac->tx_clk);
-		if (ret)
-			return ret;
+		clk_prepare(gmac->tx_clk);
 	}
 
 	return 0;

[PATCH 4.9 17/36] Revert "leds: lp5523: fix a missing check of return value of lp55xx_read"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8d1beda5f11953ffe135a5213287f0b25b4da41b upstream.

This reverts commit 248b57015f35c94d4eae2fdd8c6febf5cd703900.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

The original commit does not properly unwind if there is an error
condition so it needs to be reverted at this point in time.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: stable <stable@vger.kernel.org>
Fixes: 248b57015f35 ("leds: lp5523: fix a missing check of return value of lp55xx_read")
Link: https://lore.kernel.org/r/20210503115736.2104747-9-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/leds/leds-lp5523.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -318,9 +318,7 @@ static int lp5523_init_program_engine(st
 
 	/* Let the programs run for couple of ms and check the engine status */
 	usleep_range(3000, 6000);
-	ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
-	if (ret)
-		return ret;
+	lp55xx_read(chip, LP5523_REG_STATUS, &status);
 	status &= LP5523_ENG_STATUS_MASK;
 
 	if (status != LP5523_ENG_STATUS_MASK) {

[PATCH 4.9 18/36] Revert "hwmon: (lm80) fix a missing check of bus read in lm80 probe"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 99ae3417672a6d4a3bf68d4fc43d7c6ca074d477 upstream.

This reverts commit 9aa3aa15f4c2f74f47afd6c5db4b420fadf3f315.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, it was determined that this commit is not needed at all so
just revert it.  Also, the call to lm80_init_client() was not properly
handled, so if error handling is needed in the lm80_probe() function,
then it should be done properly, not half-baked like the commit being
reverted here did.

Cc: Kangjie Lu <kjlu@umn.edu>
Fixes: 9aa3aa15f4c2 ("hwmon: (lm80) fix a missing check of bus read in lm80 probe")
Cc: stable <stable@vger.kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210503115736.2104747-5-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hwmon/lm80.c |   11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

--- a/drivers/hwmon/lm80.c
+++ b/drivers/hwmon/lm80.c
@@ -630,7 +630,6 @@ static int lm80_probe(struct i2c_client
 	struct device *dev = &client->dev;
 	struct device *hwmon_dev;
 	struct lm80_data *data;
-	int rv;
 
 	data = devm_kzalloc(dev, sizeof(struct lm80_data), GFP_KERNEL);
 	if (!data)
@@ -643,14 +642,8 @@ static int lm80_probe(struct i2c_client
 	lm80_init_client(client);
 
 	/* A few vars need to be filled upon startup */
-	rv = lm80_read_value(client, LM80_REG_FAN_MIN(1));
-	if (rv < 0)
-		return rv;
-	data->fan[f_min][0] = rv;
-	rv = lm80_read_value(client, LM80_REG_FAN_MIN(2));
-	if (rv < 0)
-		return rv;
-	data->fan[f_min][1] = rv;
+	data->fan[f_min][0] = lm80_read_value(client, LM80_REG_FAN_MIN(1));
+	data->fan[f_min][1] = lm80_read_value(client, LM80_REG_FAN_MIN(2));
 
 	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
 							   data, lm80_groups);

[PATCH 4.9 19/36] Revert "video: imsttfb: fix potential NULL pointer dereferences"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ed04fe8a0e87d7b5ea17d47f4ac9ec962b24814a upstream.

This reverts commit 1d84353d205a953e2381044953b7fa31c8c9702d.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

The original commit here, while technically correct, did not fully
handle all of the reported issues that the commit stated it was fixing,
so revert it until it can be "fixed" fully.

Note, ioremap() probably will never fail for old hardware like this, and
if anyone actually used this hardware (a PowerMac era PCI display card),
they would not be using fbdev anymore.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Aditya Pakki <pakki001@umn.edu>
Cc: Finn Thain <fthain@telegraphics.com.au>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Fixes: 1d84353d205a ("video: imsttfb: fix potential NULL pointer dereferences")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-67-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/fbdev/imsttfb.c |    5 -----
 1 file changed, 5 deletions(-)

--- a/drivers/video/fbdev/imsttfb.c
+++ b/drivers/video/fbdev/imsttfb.c
@@ -1516,11 +1516,6 @@ static int imsttfb_probe(struct pci_dev
 	info->fix.smem_start = addr;
 	info->screen_base = (__u8 *)ioremap(addr, par->ramdac == IBM ?
 					    0x400000 : 0x800000);
-	if (!info->screen_base) {
-		release_mem_region(addr, size);
-		framebuffer_release(info);
-		return -ENOMEM;
-	}
 	info->fix.mmio_start = addr + 0x800000;
 	par->dc_regs = ioremap(addr + 0x800000, 0x1000);
 	par->cmap_regs_phys = addr + 0x840000;

[PATCH 4.9 20/36] Revert "ecryptfs: replace BUG_ON with error handling code"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e1436df2f2550bc89d832ffd456373fdf5d5b5d7 upstream.

This reverts commit 2c2a7552dd6465e8fde6bc9cccf8d66ed1c1eb72.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

The original commit log for this change was incorrect, no "error
handling code" was added, things will blow up just as badly as before if
any of these cases ever were true.  As this BUG_ON() never fired, and
most of these checks are "obviously" never going to be true, let's just
revert to the original code for now until this gets unwound to be done
correctly in the future.

Cc: Aditya Pakki <pakki001@umn.edu>
Fixes: 2c2a7552dd64 ("ecryptfs: replace BUG_ON with error handling code")
Cc: stable <stable@vger.kernel.org>
Acked-by: Tyler Hicks <code@tyhicks.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-49-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ecryptfs/crypto.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -339,10 +339,8 @@ static int crypt_scatterlist(struct ecry
 	struct extent_crypt_result ecr;
 	int rc = 0;
 
-	if (!crypt_stat || !crypt_stat->tfm
-	       || !(crypt_stat->flags & ECRYPTFS_STRUCT_INITIALIZED))
-		return -EINVAL;
-
+	BUG_ON(!crypt_stat || !crypt_stat->tfm
+	       || !(crypt_stat->flags & ECRYPTFS_STRUCT_INITIALIZED));
 	if (unlikely(ecryptfs_verbosity > 0)) {
 		ecryptfs_printk(KERN_DEBUG, "Key size [%zd]; key:\n",
 				crypt_stat->key_size);

[PATCH 4.9 21/36] Revert "gdrom: fix a memory leak bug"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 257343d3ed557f11d580d0b7c515dc154f64a42b upstream.

This reverts commit 093c48213ee37c3c3ff1cf5ac1aa2a9d8bc66017.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

Because of this, all submissions from this group must be reverted from
the kernel tree and will need to be re-reviewed again to determine if
they actually are a valid fix.  Until that work is complete, remove this
change to ensure that no problems are being introduced into the
codebase.

Cc: Wenwen Wang <wang6495@umn.edu>
Cc: Peter Rosin <peda@axentia.se>
Cc: Jens Axboe <axboe@kernel.dk>
Fixes: 093c48213ee3 ("gdrom: fix a memory leak bug")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-27-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/cdrom/gdrom.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -882,7 +882,6 @@ static void __exit exit_gdrom(void)
 	platform_device_unregister(pd);
 	platform_driver_unregister(&gdrom_driver);
 	kfree(gd.toc);
-	kfree(gd.cd_info);
 }
 
 module_init(init_gdrom);

[PATCH 4.9 22/36] cdrom: gdrom: deallocate struct gdrom_unit fields in remove_gdrom

[Greg Kroah-Hartman]

From: Atul Gopinathan <atulgopinathan@gmail.com>

commit d03d1021da6fe7f46efe9f2a7335564e7c9db5ab upstream.

The fields, "toc" and "cd_info", of "struct gdrom_unit gd" are allocated
in "probe_gdrom()". Prevent a memory leak by making sure "gd.cd_info" is
deallocated in the "remove_gdrom()" function.

Also prevent double free of the field "gd.toc" by moving it from the
module's exit function to "remove_gdrom()". This is because, in
"probe_gdrom()", the function makes sure to deallocate "gd.toc" in case
of any errors, so the exit function invoked later would again free
"gd.toc".

The patch also maintains consistency by deallocating the above mentioned
fields in "remove_gdrom()" along with another memory allocated field
"gd.disk".

Suggested-by: Jens Axboe <axboe@kernel.dk>
Cc: Peter Rosin <peda@axentia.se>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Atul Gopinathan <atulgopinathan@gmail.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-28-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/cdrom/gdrom.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -850,6 +850,8 @@ static int remove_gdrom(struct platform_
 	if (gdrom_major)
 		unregister_blkdev(gdrom_major, GDROM_DEV_NAME);
 	unregister_cdrom(gd.cd_info);
+	kfree(gd.cd_info);
+	kfree(gd.toc);
 
 	return 0;
 }
@@ -881,7 +883,6 @@ static void __exit exit_gdrom(void)
 {
 	platform_device_unregister(pd);
 	platform_driver_unregister(&gdrom_driver);
-	kfree(gd.toc);
 }
 
 module_init(init_gdrom);

[PATCH 4.9 23/36] cdrom: gdrom: initialize global variable at init time

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9183f01b5e6e32eb3f17b5f3f8d5ad5ac9786c49 upstream.

As Peter points out, if we were to disconnect and then reconnect this
driver from a device, the "global" state of the device would contain odd
values and could cause problems.  Fix this up by just initializing the
whole thing to 0 at probe() time.

Ideally this would be a per-device variable, but given the age and the
total lack of users of it, that would require a lot of s/./->/g changes
for really no good reason.

Reported-by: Peter Rosin <peda@axentia.se>
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/YJP2j6AU82MqEY2M@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/cdrom/gdrom.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -773,6 +773,13 @@ static int probe_gdrom_setupqueue(void)
 static int probe_gdrom(struct platform_device *devptr)
 {
 	int err;
+
+	/*
+	 * Ensure our "one" device is initialized properly in case of previous
+	 * usages of it
+	 */
+	memset(&gd, 0, sizeof(gd));
+
 	/* Start the device */
 	if (gdrom_execute_diagnostic() != 1) {
 		pr_warning("ATA Probe for GDROM failed\n");
@@ -867,7 +874,7 @@ static struct platform_driver gdrom_driv
 static int __init init_gdrom(void)
 {
 	int rc;
-	gd.toc = NULL;
+
 	rc = platform_driver_register(&gdrom_driver);
 	if (rc)
 		return rc;

[PATCH 4.9 24/36] Revert "rtlwifi: fix a potential NULL pointer dereference"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 68c5634c4a7278672a3bed00eb5646884257c413 upstream.

This reverts commit 765976285a8c8db3f0eb7f033829a899d0c2786e.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

This commit is not correct, it should not have used unlikely() and is
not propagating the error properly to the calling function, so it should
be reverted at this point in time.  Also, if the check failed, the
work queue was still assumed to be allocated, so further accesses would
have continued to fail, meaning this patch does nothing to solve the
root issues at all.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Bryan Brattlof <hello@bryanbrattlof.com>
Fixes: 765976285a8c ("rtlwifi: fix a potential NULL pointer dereference")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-13-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/realtek/rtlwifi/base.c |    5 -----
 1 file changed, 5 deletions(-)

--- a/drivers/net/wireless/realtek/rtlwifi/base.c
+++ b/drivers/net/wireless/realtek/rtlwifi/base.c
@@ -466,11 +466,6 @@ static void _rtl_init_deferred_work(stru
 	/* <2> work queue */
 	rtlpriv->works.hw = hw;
 	rtlpriv->works.rtl_wq = alloc_workqueue("%s", 0, 0, rtlpriv->cfg->name);
-	if (unlikely(!rtlpriv->works.rtl_wq)) {
-		pr_err("Failed to allocate work queue\n");
-		return;
-	}
-
 	INIT_DELAYED_WORK(&rtlpriv->works.watchdog_wq,
 			  (void *)rtl_watchdog_wq_callback);
 	INIT_DELAYED_WORK(&rtlpriv->works.ips_nic_off_wq,

[PATCH 4.9 25/36] Revert "qlcnic: Avoid potential NULL pointer dereference"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b95b57dfe7a142bf2446548eb7f49340fd73e78b upstream.

This reverts commit 5bf7295fe34a5251b1d241b9736af4697b590670.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

This commit does not properly detect if an error happens because the
logic after this loop will not detect that there was a failed
allocation.

Cc: Aditya Pakki <pakki001@umn.edu>
Cc: David S. Miller <davem@davemloft.net>
Fixes: 5bf7295fe34a ("qlcnic: Avoid potential NULL pointer dereference")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-25-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
@@ -1038,8 +1038,6 @@ int qlcnic_do_lb_test(struct qlcnic_adap
 
 	for (i = 0; i < QLCNIC_NUM_ILB_PKT; i++) {
 		skb = netdev_alloc_skb(adapter->netdev, QLCNIC_ILB_PKT_SIZE);
-		if (!skb)
-			break;
 		qlcnic_create_loopback_buff(skb->data, adapter->mac_addr);
 		skb_put(skb, QLCNIC_ILB_PKT_SIZE);
 		adapter->ahw->diag_cnt = 0;

[PATCH 4.9 26/36] Revert "niu: fix missing checks of niu_pci_eeprom_read"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7930742d6a0ff091c85b92ef4e076432d8d8cb79 upstream.

This reverts commit 26fd962bde0b15e54234fe762d86bc0349df1de4.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

The change here was incorrect.  While it is nice to check if
niu_pci_eeprom_read() succeeded or not when using the data, any error
that might have happened was not propagated upwards properly, causing
the kernel to assume that these reads were successful, which results in
invalid data in the buffer that was to contain the successfully read
data.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Shannon Nelson <shannon.lee.nelson@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Fixes: 26fd962bde0b ("niu: fix missing checks of niu_pci_eeprom_read")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-23-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/sun/niu.c |   10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

--- a/drivers/net/ethernet/sun/niu.c
+++ b/drivers/net/ethernet/sun/niu.c
@@ -8119,8 +8119,6 @@ static int niu_pci_vpd_scan_props(struct
 		start += 3;
 
 		prop_len = niu_pci_eeprom_read(np, start + 4);
-		if (prop_len < 0)
-			return prop_len;
 		err = niu_pci_vpd_get_propname(np, start + 5, namebuf, 64);
 		if (err < 0)
 			return err;
@@ -8165,12 +8163,8 @@ static int niu_pci_vpd_scan_props(struct
 			netif_printk(np, probe, KERN_DEBUG, np->dev,
 				     "VPD_SCAN: Reading in property [%s] len[%d]\n",
 				     namebuf, prop_len);
-			for (i = 0; i < prop_len; i++) {
-				err = niu_pci_eeprom_read(np, off + i);
-				if (err >= 0)
-					*prop_buf = err;
-				++prop_buf;
-			}
+			for (i = 0; i < prop_len; i++)
+				*prop_buf++ = niu_pci_eeprom_read(np, off + i);
 		}
 
 		start += len;

[PATCH 4.9 27/36] ethernet: sun: niu: fix missing checks of niu_pci_eeprom_read()

[Greg Kroah-Hartman]

From: Du Cheng <ducheng2@gmail.com>

commit e6e337708c22f80824b82d4af645f20715730ad0 upstream.

niu_pci_eeprom_read() may fail, so add checks to its return value and
propagate the error up the callstack.

An examination of the callstack up to niu_pci_eeprom_read shows that:

niu_pci_eeprom_read() // returns int
    niu_pci_vpd_scan_props() // returns int
        niu_pci_vpd_fetch() // returns *void*
            niu_get_invariants() // returns int

since niu_pci_vpd_fetch() returns void which breaks the bubbling up,
change its return type to int so that error is propagated upwards.

Signed-off-by: Du Cheng <ducheng2@gmail.com>
Cc: Shannon Nelson <shannon.lee.nelson@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-24-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/sun/niu.c |   34 ++++++++++++++++++++++++----------
 1 file changed, 24 insertions(+), 10 deletions(-)

--- a/drivers/net/ethernet/sun/niu.c
+++ b/drivers/net/ethernet/sun/niu.c
@@ -8119,6 +8119,8 @@ static int niu_pci_vpd_scan_props(struct
 		start += 3;
 
 		prop_len = niu_pci_eeprom_read(np, start + 4);
+		if (prop_len < 0)
+			return prop_len;
 		err = niu_pci_vpd_get_propname(np, start + 5, namebuf, 64);
 		if (err < 0)
 			return err;
@@ -8163,8 +8165,12 @@ static int niu_pci_vpd_scan_props(struct
 			netif_printk(np, probe, KERN_DEBUG, np->dev,
 				     "VPD_SCAN: Reading in property [%s] len[%d]\n",
 				     namebuf, prop_len);
-			for (i = 0; i < prop_len; i++)
-				*prop_buf++ = niu_pci_eeprom_read(np, off + i);
+			for (i = 0; i < prop_len; i++) {
+				err =  niu_pci_eeprom_read(np, off + i);
+				if (err < 0)
+					return err;
+				*prop_buf++ = err;
+			}
 		}
 
 		start += len;
@@ -8174,14 +8180,14 @@ static int niu_pci_vpd_scan_props(struct
 }
 
 /* ESPC_PIO_EN_ENABLE must be set */
-static void niu_pci_vpd_fetch(struct niu *np, u32 start)
+static int niu_pci_vpd_fetch(struct niu *np, u32 start)
 {
 	u32 offset;
 	int err;
 
 	err = niu_pci_eeprom_read16_swp(np, start + 1);
 	if (err < 0)
-		return;
+		return err;
 
 	offset = err + 3;
 
@@ -8190,12 +8196,14 @@ static void niu_pci_vpd_fetch(struct niu
 		u32 end;
 
 		err = niu_pci_eeprom_read(np, here);
+		if (err < 0)
+			return err;
 		if (err != 0x90)
-			return;
+			return -EINVAL;
 
 		err = niu_pci_eeprom_read16_swp(np, here + 1);
 		if (err < 0)
-			return;
+			return err;
 
 		here = start + offset + 3;
 		end = start + offset + err;
@@ -8203,9 +8211,12 @@ static void niu_pci_vpd_fetch(struct niu
 		offset += err;
 
 		err = niu_pci_vpd_scan_props(np, here, end);
-		if (err < 0 || err == 1)
-			return;
+		if (err < 0)
+			return err;
+		if (err == 1)
+			return -EINVAL;
 	}
+	return 0;
 }
 
 /* ESPC_PIO_EN_ENABLE must be set */
@@ -9298,8 +9309,11 @@ static int niu_get_invariants(struct niu
 		offset = niu_pci_vpd_offset(np);
 		netif_printk(np, probe, KERN_DEBUG, np->dev,
 			     "%s() VPD offset [%08x]\n", __func__, offset);
-		if (offset)
-			niu_pci_vpd_fetch(np, offset);
+		if (offset) {
+			err = niu_pci_vpd_fetch(np, offset);
+			if (err < 0)
+				return err;
+		}
 		nw64(ESPC_PIO_EN, 0);
 
 		if (np->flags & NIU_FLAGS_VPD_VALID) {

[PATCH 4.9 28/36] net: stmicro: handle clk_prepare() failure during init

[Greg Kroah-Hartman]

From: Anirudh Rayabharam <mail@anirudhrb.com>

commit 0c32a96d000f260b5ebfabb4145a86ae1cd71847 upstream.

In case clk_prepare() fails, capture and propagate the error code up the
stack. If regulator_enable() was called earlier, properly unwind it by
calling regulator_disable().

Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-22-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
@@ -39,7 +39,7 @@ struct sunxi_priv_data {
 static int sun7i_gmac_init(struct platform_device *pdev, void *priv)
 {
 	struct sunxi_priv_data *gmac = priv;
-	int ret;
+	int ret = 0;
 
 	if (gmac->regulator) {
 		ret = regulator_enable(gmac->regulator);
@@ -59,10 +59,12 @@ static int sun7i_gmac_init(struct platfo
 		gmac->clk_enabled = 1;
 	} else {
 		clk_set_rate(gmac->tx_clk, SUN7I_GMAC_MII_RATE);
-		clk_prepare(gmac->tx_clk);
+		ret = clk_prepare(gmac->tx_clk);
+		if (ret && gmac->regulator)
+			regulator_disable(gmac->regulator);
 	}
 
-	return 0;
+	return ret;
 }
 
 static void sun7i_gmac_exit(struct platform_device *pdev, void *priv)

[PATCH 4.9 29/36] net: rtlwifi: properly check for alloc_workqueue() failure

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 30b0e0ee9d02b97b68705c46b41444786effc40c upstream.

If alloc_workqueue() fails, properly catch this and propagate the error
to the calling functions, so that the devuce initialization will
properly error out.

Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Bryan Brattlof <hello@bryanbrattlof.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-14-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/realtek/rtlwifi/base.c |   16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

--- a/drivers/net/wireless/realtek/rtlwifi/base.c
+++ b/drivers/net/wireless/realtek/rtlwifi/base.c
@@ -454,9 +454,14 @@ static void _rtl_init_mac80211(struct ie
 	}
 }
 
-static void _rtl_init_deferred_work(struct ieee80211_hw *hw)
+static int _rtl_init_deferred_work(struct ieee80211_hw *hw)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct workqueue_struct *wq;
+
+	wq = alloc_workqueue("%s", 0, 0, rtlpriv->cfg->name);
+	if (!wq)
+		return -ENOMEM;
 
 	/* <1> timer */
 	setup_timer(&rtlpriv->works.watchdog_timer,
@@ -465,7 +470,8 @@ static void _rtl_init_deferred_work(stru
 		    rtl_easy_concurrent_retrytimer_callback, (unsigned long)hw);
 	/* <2> work queue */
 	rtlpriv->works.hw = hw;
-	rtlpriv->works.rtl_wq = alloc_workqueue("%s", 0, 0, rtlpriv->cfg->name);
+	rtlpriv->works.rtl_wq = wq;
+
 	INIT_DELAYED_WORK(&rtlpriv->works.watchdog_wq,
 			  (void *)rtl_watchdog_wq_callback);
 	INIT_DELAYED_WORK(&rtlpriv->works.ips_nic_off_wq,
@@ -476,7 +482,7 @@ static void _rtl_init_deferred_work(stru
 			  (void *)rtl_swlps_rfon_wq_callback);
 	INIT_DELAYED_WORK(&rtlpriv->works.fwevt_wq,
 			  (void *)rtl_fwevt_wq_callback);
-
+	return 0;
 }
 
 void rtl_deinit_deferred_work(struct ieee80211_hw *hw)
@@ -568,9 +574,7 @@ int rtl_init_core(struct ieee80211_hw *h
 	rtlmac->link_state = MAC80211_NOLINK;
 
 	/* <6> init deferred work */
-	_rtl_init_deferred_work(hw);
-
-	return 0;
+	return _rtl_init_deferred_work(hw);
 }
 EXPORT_SYMBOL_GPL(rtl_init_core);
 

[PATCH 4.9 30/36] leds: lp5523: check return value of lp5xx_read and jump to cleanup code

[Greg Kroah-Hartman]

From: Phillip Potter <phil@philpotter.co.uk>

commit 6647f7a06eb030a2384ec71f0bb2e78854afabfe upstream.

Check return value of lp5xx_read and if non-zero, jump to code at end of
the function, causing lp5523_stop_all_engines to be executed before
returning the error value up the call chain. This fixes the original
commit (248b57015f35) which was reverted due to the University of Minnesota
problems.

Cc: stable <stable@vger.kernel.org>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210503115736.2104747-10-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/leds/leds-lp5523.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -318,7 +318,9 @@ static int lp5523_init_program_engine(st
 
 	/* Let the programs run for couple of ms and check the engine status */
 	usleep_range(3000, 6000);
-	lp55xx_read(chip, LP5523_REG_STATUS, &status);
+	ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
+	if (ret)
+		goto out;
 	status &= LP5523_ENG_STATUS_MASK;
 
 	if (status != LP5523_ENG_STATUS_MASK) {

[PATCH 4.9 31/36] qlcnic: Add null check after calling netdev_alloc_skb

[Greg Kroah-Hartman]

From: Tom Seewald <tseewald@gmail.com>

commit 84460f01cba382553199bc1361f69a872d5abed4 upstream.

The function qlcnic_dl_lb_test() currently calls netdev_alloc_skb()
without checking afterwards that the allocation succeeded. Fix this by
checking if the skb is NULL and returning an error in such a case.
Breaking out of the loop if the skb is NULL is not correct as no error
would be reported to the caller and no message would be printed for the
user.

Cc: David S. Miller <davem@davemloft.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Tom Seewald <tseewald@gmail.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-26-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
@@ -1038,6 +1038,8 @@ int qlcnic_do_lb_test(struct qlcnic_adap
 
 	for (i = 0; i < QLCNIC_NUM_ILB_PKT; i++) {
 		skb = netdev_alloc_skb(adapter->netdev, QLCNIC_ILB_PKT_SIZE);
+		if (!skb)
+			goto error;
 		qlcnic_create_loopback_buff(skb->data, adapter->mac_addr);
 		skb_put(skb, QLCNIC_ILB_PKT_SIZE);
 		adapter->ahw->diag_cnt = 0;
@@ -1061,6 +1063,7 @@ int qlcnic_do_lb_test(struct qlcnic_adap
 			cnt++;
 	}
 	if (cnt != i) {
+error:
 		dev_err(&adapter->pdev->dev,
 			"LB Test: failed, TX[%d], RX[%d]\n", i, cnt);
 		if (mode != QLCNIC_ILB_MODE)

[PATCH 4.9 32/36] video: hgafb: fix potential NULL pointer dereference

[Greg Kroah-Hartman]

From: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>

commit dc13cac4862cc68ec74348a80b6942532b7735fa upstream.

The return of ioremap if not checked, and can lead to a NULL to be
assigned to hga_vram. Potentially leading to a NULL pointer
dereference.

The fix adds code to deal with this case in the error label and
changes how the hgafb_probe handles the return of hga_card_detect.

Cc: Ferenc Bakonyi <fero@drama.obuda.kando.hu>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-40-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/fbdev/hgafb.c |   21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

--- a/drivers/video/fbdev/hgafb.c
+++ b/drivers/video/fbdev/hgafb.c
@@ -285,6 +285,8 @@ static int hga_card_detect(void)
 	hga_vram_len  = 0x08000;
 
 	hga_vram = ioremap(0xb0000, hga_vram_len);
+	if (!hga_vram)
+		return -ENOMEM;
 
 	if (request_region(0x3b0, 12, "hgafb"))
 		release_io_ports = 1;
@@ -344,13 +346,18 @@ static int hga_card_detect(void)
 			hga_type_name = "Hercules";
 			break;
 	}
-	return 1;
+	return 0;
 error:
 	if (release_io_ports)
 		release_region(0x3b0, 12);
 	if (release_io_port)
 		release_region(0x3bf, 1);
-	return 0;
+
+	iounmap(hga_vram);
+
+	pr_err("hgafb: HGA card not detected.\n");
+
+	return -EINVAL;
 }
 
 /**
@@ -548,13 +555,11 @@ static struct fb_ops hgafb_ops = {
 static int hgafb_probe(struct platform_device *pdev)
 {
 	struct fb_info *info;
+	int ret;
 
-	if (! hga_card_detect()) {
-		printk(KERN_INFO "hgafb: HGA card not detected.\n");
-		if (hga_vram)
-			iounmap(hga_vram);
-		return -EINVAL;
-	}
+	ret = hga_card_detect();
+	if (!ret)
+		return ret;
 
 	printk(KERN_INFO "hgafb: %s with %ldK of memory detected.\n",
 		hga_type_name, hga_vram_len/1024);

[PATCH 4.9 33/36] vgacon: Record video mode changes with VT_RESIZEX

[Greg Kroah-Hartman]

From: Maciej W. Rozycki <macro@orcam.me.uk>

commit d4d0ad57b3865795c4cde2fb5094c594c2e8f469 upstream.

Fix an issue with VGA console font size changes made after the initial
video text mode has been changed with a user tool like `svgatextmode'
calling the VT_RESIZEX ioctl.  As it stands in that case the original
screen geometry continues being used to validate further VT resizing.

Consequently when the video adapter is firstly reprogrammed from the
original say 80x25 text mode using a 9x16 character cell (720x400 pixel
resolution) to say 80x37 text mode and the same character cell (720x592
pixel resolution), and secondly the CRTC character cell updated to 9x8
(by loading a suitable font with the KD_FONT_OP_SET request of the
KDFONTOP ioctl), the VT geometry does not get further updated from 80x37
and only upper half of the screen is used for the VT, with the lower
half showing rubbish corresponding to whatever happens to be there in
the video memory that maps to that part of the screen.  Of course the
proportions change according to text mode geometries and font sizes
chosen.

Address the problem then, by updating the text mode geometry defaults
rather than checking against them whenever the VT is resized via a user
ioctl.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: e400b6ec4ede ("vt/vgacon: Check if screen resize request comes from userspace")
Cc: stable@vger.kernel.org # v2.6.24+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/console/vgacon.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -1174,12 +1174,20 @@ static int vgacon_resize(struct vc_data
 	if ((width << 1) * height > vga_vram_size)
 		return -EINVAL;
 
+	if (user) {
+		/*
+		 * Ho ho!  Someone (svgatextmode, eh?) may have reprogrammed
+		 * the video mode!  Set the new defaults then and go away.
+		 */
+		screen_info.orig_video_cols = width;
+		screen_info.orig_video_lines = height;
+		vga_default_font_height = c->vc_font.height;
+		return 0;
+	}
 	if (width % 2 || width > screen_info.orig_video_cols ||
 	    height > (screen_info.orig_video_lines * vga_default_font_height)/
 	    c->vc_font.height)
-		/* let svgatextmode tinker with video timings and
-		   return success */
-		return (user) ? 0 : -EINVAL;
+		return -EINVAL;
 
 	if (con_is_visible(c) && !vga_is_gfx) /* who knows */
 		vgacon_doresize(c, width, height);

[PATCH 4.9 34/36] vt: Fix character height handling with VT_RESIZEX

[Greg Kroah-Hartman]

From: Maciej W. Rozycki <macro@orcam.me.uk>

commit 860dafa902595fb5f1d23bbcce1215188c3341e6 upstream.

Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter
which is the number of pixel rows per character (cell) rather than the
height of the font used.

For framebuffer devices the two values are always the same, because the
former is inferred from the latter one.  For VGA used as a true text
mode device these two parameters are independent from each other: the
number of pixel rows per character is set in the CRT controller, while
font height is in fact hardwired to 32 pixel rows and fonts of heights
below that value are handled by padding their data with blanks when
loaded to hardware for use by the character generator.  One can change
the setting in the CRT controller and it will update the screen contents
accordingly regardless of the font loaded.

The `v_clin' parameter is used by the `vgacon' driver to set the height
of the character cell and then the cursor position within.  Make the
parameter explicit then, by defining a new `vc_cell_height' struct
member of `vc_data', set it instead of `vc_font.height' from `v_clin' in
the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver
except where actual font data is accessed which as noted above is
independent from the CRTC setting.

This way the framebuffer console driver is free to ignore the `v_clin'
parameter as irrelevant, as it always should have, avoiding any issues
attempts to give the parameter a meaning there could have caused, such
as one that has led to commit 988d0763361b ("vt_ioctl: make VT_RESIZEX
behave like VT_RESIZE"):

 "syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2],
  for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height
  larger than actual font height calculated by con_font_set() from
  ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates
  minimal amount of memory based on actual font height calculated by
  con_font_set(), use of vt_resizex() can cause UAF/OOB read for font
  data."

The problem first appeared around Linux 2.5.66 which predates our repo
history, but the origin could be identified with the old MIPS/Linux repo
also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git>
as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX
code in `vt_ioctl' was updated as follows:

 		if (clin)
-			video_font_height = clin;
+			vc->vc_font.height = clin;

making the parameter apply to framebuffer devices as well, perhaps due
to the use of "font" in the name of the original `video_font_height'
variable.  Use "cell" in the new struct member then to avoid ambiguity.


[1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837
[2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org # v2.6.12+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/vt/vt_ioctl.c      |    6 ++---
 drivers/video/console/vgacon.c |   44 ++++++++++++++++++++---------------------
 include/linux/console_struct.h |    1 
 3 files changed, 26 insertions(+), 25 deletions(-)

--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -898,17 +898,17 @@ int vt_ioctl(struct tty_struct *tty,
 			if (vcp) {
 				int ret;
 				int save_scan_lines = vcp->vc_scan_lines;
-				int save_font_height = vcp->vc_font.height;
+				int save_cell_height = vcp->vc_cell_height;
 
 				if (v.v_vlin)
 					vcp->vc_scan_lines = v.v_vlin;
 				if (v.v_clin)
-					vcp->vc_font.height = v.v_clin;
+					vcp->vc_cell_height = v.v_clin;
 				vcp->vc_resize_user = 1;
 				ret = vc_resize(vcp, v.v_cols, v.v_rows);
 				if (ret) {
 					vcp->vc_scan_lines = save_scan_lines;
-					vcp->vc_font.height = save_font_height;
+					vcp->vc_cell_height = save_cell_height;
 					console_unlock();
 					return ret;
 				}
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -434,7 +434,7 @@ static void vgacon_init(struct vc_data *
 		vc_resize(c, vga_video_num_columns, vga_video_num_lines);
 
 	c->vc_scan_lines = vga_scan_lines;
-	c->vc_font.height = vga_video_font_height;
+	c->vc_font.height = c->vc_cell_height = vga_video_font_height;
 	c->vc_complement_mask = 0x7700;
 	if (vga_512_chars)
 		c->vc_hi_font_mask = 0x0800;
@@ -572,32 +572,32 @@ static void vgacon_cursor(struct vc_data
 		switch (c->vc_cursor_type & 0x0f) {
 		case CUR_UNDERLINE:
 			vgacon_set_cursor_size(c->vc_x,
-					       c->vc_font.height -
-					       (c->vc_font.height <
+					       c->vc_cell_height -
+					       (c->vc_cell_height <
 						10 ? 2 : 3),
-					       c->vc_font.height -
-					       (c->vc_font.height <
+					       c->vc_cell_height -
+					       (c->vc_cell_height <
 						10 ? 1 : 2));
 			break;
 		case CUR_TWO_THIRDS:
 			vgacon_set_cursor_size(c->vc_x,
-					       c->vc_font.height / 3,
-					       c->vc_font.height -
-					       (c->vc_font.height <
+					       c->vc_cell_height / 3,
+					       c->vc_cell_height -
+					       (c->vc_cell_height <
 						10 ? 1 : 2));
 			break;
 		case CUR_LOWER_THIRD:
 			vgacon_set_cursor_size(c->vc_x,
-					       (c->vc_font.height * 2) / 3,
-					       c->vc_font.height -
-					       (c->vc_font.height <
+					       (c->vc_cell_height * 2) / 3,
+					       c->vc_cell_height -
+					       (c->vc_cell_height <
 						10 ? 1 : 2));
 			break;
 		case CUR_LOWER_HALF:
 			vgacon_set_cursor_size(c->vc_x,
-					       c->vc_font.height / 2,
-					       c->vc_font.height -
-					       (c->vc_font.height <
+					       c->vc_cell_height / 2,
+					       c->vc_cell_height -
+					       (c->vc_cell_height <
 						10 ? 1 : 2));
 			break;
 		case CUR_NONE:
@@ -608,7 +608,7 @@ static void vgacon_cursor(struct vc_data
 			break;
 		default:
 			vgacon_set_cursor_size(c->vc_x, 1,
-					       c->vc_font.height);
+					       c->vc_cell_height);
 			break;
 		}
 		break;
@@ -619,13 +619,13 @@ static int vgacon_doresize(struct vc_dat
 		unsigned int width, unsigned int height)
 {
 	unsigned long flags;
-	unsigned int scanlines = height * c->vc_font.height;
+	unsigned int scanlines = height * c->vc_cell_height;
 	u8 scanlines_lo = 0, r7 = 0, vsync_end = 0, mode, max_scan;
 
 	raw_spin_lock_irqsave(&vga_lock, flags);
 
 	vgacon_xres = width * VGA_FONTWIDTH;
-	vgacon_yres = height * c->vc_font.height;
+	vgacon_yres = height * c->vc_cell_height;
 	if (vga_video_type >= VIDEO_TYPE_VGAC) {
 		outb_p(VGA_CRTC_MAX_SCAN, vga_video_port_reg);
 		max_scan = inb_p(vga_video_port_val);
@@ -680,9 +680,9 @@ static int vgacon_doresize(struct vc_dat
 static int vgacon_switch(struct vc_data *c)
 {
 	int x = c->vc_cols * VGA_FONTWIDTH;
-	int y = c->vc_rows * c->vc_font.height;
+	int y = c->vc_rows * c->vc_cell_height;
 	int rows = screen_info.orig_video_lines * vga_default_font_height/
-		c->vc_font.height;
+		c->vc_cell_height;
 	/*
 	 * We need to save screen size here as it's the only way
 	 * we can spot the screen has been resized and we need to
@@ -1120,7 +1120,7 @@ static int vgacon_adjust_height(struct v
 				cursor_size_lastto = 0;
 				c->vc_sw->con_cursor(c, CM_DRAW);
 			}
-			c->vc_font.height = fontheight;
+			c->vc_font.height = c->vc_cell_height = fontheight;
 			vc_resize(c, 0, rows);	/* Adjust console size */
 		}
 	}
@@ -1181,12 +1181,12 @@ static int vgacon_resize(struct vc_data
 		 */
 		screen_info.orig_video_cols = width;
 		screen_info.orig_video_lines = height;
-		vga_default_font_height = c->vc_font.height;
+		vga_default_font_height = c->vc_cell_height;
 		return 0;
 	}
 	if (width % 2 || width > screen_info.orig_video_cols ||
 	    height > (screen_info.orig_video_lines * vga_default_font_height)/
-	    c->vc_font.height)
+	    c->vc_cell_height)
 		return -EINVAL;
 
 	if (con_is_visible(c) && !vga_is_gfx) /* who knows */
--- a/include/linux/console_struct.h
+++ b/include/linux/console_struct.h
@@ -61,6 +61,7 @@ struct vc_data {
 	unsigned int	vc_rows;
 	unsigned int	vc_size_row;		/* Bytes per row */
 	unsigned int	vc_scan_lines;		/* # of scan lines */
+	unsigned int	vc_cell_height;		/* CRTC character cell height */
 	unsigned long	vc_origin;		/* [!] Start of real screen */
 	unsigned long	vc_scr_end;		/* [!] End of real screen */
 	unsigned long	vc_visible_origin;	/* [!] Top of visible window */

[PATCH 4.9 35/36] tty: vt: always invoke vc->vc_sw->con_resize callback

[Greg Kroah-Hartman]

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

commit ffb324e6f874121f7dce5bdae5e05d02baae7269 upstream.

syzbot is reporting OOB write at vga16fb_imageblit() [1], for
resize_screen() from ioctl(VT_RESIZE) returns 0 without checking whether
requested rows/columns fit the amount of memory reserved for the graphical
screen if current mode is KD_GRAPHICS.

----------
  #include <sys/types.h>
  #include <sys/stat.h>
  #include <fcntl.h>
  #include <sys/ioctl.h>
  #include <linux/kd.h>
  #include <linux/vt.h>

  int main(int argc, char *argv[])
  {
        const int fd = open("/dev/char/4:1", O_RDWR);
        struct vt_sizes vt = { 0x4100, 2 };

        ioctl(fd, KDSETMODE, KD_GRAPHICS);
        ioctl(fd, VT_RESIZE, &vt);
        ioctl(fd, KDSETMODE, KD_TEXT);
        return 0;
  }
----------

Allow framebuffer drivers to return -EINVAL, by moving vc->vc_mode !=
KD_GRAPHICS check from resize_screen() to fbcon_resize().

Link: https://syzkaller.appspot.com/bug?extid=1f29e126cf461c4de3b3 [1]
Reported-by: syzbot <syzbot+1f29e126cf461c4de3b3@syzkaller.appspotmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+1f29e126cf461c4de3b3@syzkaller.appspotmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/vt/vt.c           |    2 +-
 drivers/video/console/fbcon.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -838,7 +838,7 @@ static inline int resize_screen(struct v
 	/* Resizes the resolution of the display adapater */
 	int err = 0;
 
-	if (vc->vc_mode != KD_GRAPHICS && vc->vc_sw->con_resize)
+	if (vc->vc_sw->con_resize)
 		err = vc->vc_sw->con_resize(vc, width, height, user);
 
 	return err;
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -1986,7 +1986,7 @@ static int fbcon_resize(struct vc_data *
 			return -EINVAL;
 
 		DPRINTK("resize now %ix%i\n", var.xres, var.yres);
-		if (con_is_visible(vc)) {
+		if (con_is_visible(vc) && vc->vc_mode == KD_TEXT) {
 			var.activate = FB_ACTIVATE_NOW |
 				FB_ACTIVATE_FORCE;
 			fb_set_var(info, &var);

[PATCH 4.9 36/36] iio: tsl2583: Fix division by a zero lux_val

[Greg Kroah-Hartman]

From: Colin Ian King <colin.king@canonical.com>

commit af0e1871d79cfbb91f732d2c6fa7558e45c31038 upstream.

The lux_val returned from tsl2583_get_lux can potentially be zero,
so check for this to avoid a division by zero and an overflowed
gain_trim_val.

Fixes clang scan-build warning:

drivers/iio/light/tsl2583.c:345:40: warning: Either the
condition 'lux_val<0' is redundant or there is division
by zero at line 345. [zerodivcond]

Fixes: ac4f6eee8fe8 ("staging: iio: TAOS tsl258x: Device driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[Colin Ian King: minor context adjustments for 4.9.y]
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/iio/light/tsl2583.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/staging/iio/light/tsl2583.c
+++ b/drivers/staging/iio/light/tsl2583.c
@@ -382,6 +382,15 @@ static int taos_als_calibrate(struct iio
 		dev_err(&chip->client->dev, "taos_als_calibrate failed to get lux\n");
 		return lux_val;
 	}
+
+	/* Avoid division by zero of lux_value later on */
+	if (lux_val == 0) {
+		dev_err(&chip->client->dev,
+			"%s: lux_val of 0 will produce out of range trim_value\n",
+			__func__);
+		return -ENODATA;
+	}
+
 	gain_trim_val = (unsigned int)(((chip->taos_settings.als_cal_target)
 			* chip->taos_settings.als_gain_trim) / lux_val);
 

Re: [PATCH 4.9 00/36] 4.9.270-rc1 review

[Florian Fainelli]

On 5/24/21 8:24 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.270 release.
> There are 36 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.270-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB, using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 4.9 00/36] 4.9.270-rc1 review

[Shuah Khan]

On 5/24/21 9:24 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.270 release.
> There are 36 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.270-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 4.9 00/36] 4.9.270-rc1 review

[Jon Hunter]

On Mon, 24 May 2021 17:24:45 +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.270 release.
> There are 36 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.270-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v4.9:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    32 tests:	32 pass, 0 fail

Linux version:	4.9.270-rc1-gc1efed5276d2
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 4.9 00/36] 4.9.270-rc1 review

[Naresh Kamboju]

On Mon, 24 May 2021 at 21:01, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.9.270 release.
> There are 36 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.270-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h


Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 4.9.270-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-4.9.y
* git commit: c1efed5276d233a93736fd701ad502ce298890cd
* git describe: v4.9.269-37-gc1efed5276d2
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.9.y/build/v4.9.269-37-gc1efed5276d2

## No regressions (compared to v4.9.268-241-g8622fef5eee9)

## No fixes (compared to v4.9.268-241-g8622fef5eee9)

## Test result summary
 total: 59911, pass: 47886, fail: 1284, skip: 9944, xfail: 797,

## Build Summary
* arm: 97 total, 97 passed, 0 failed
* arm64: 24 total, 24 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 14 total, 14 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 36 total, 36 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 14 total, 14 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest-android
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.9 00/36] 4.9.270-rc1 review

[Guenter Roeck]

On Mon, May 24, 2021 at 05:24:45PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.270 release.
> There are 36 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 163 pass: 163 fail: 0
Qemu test results:
	total: 383 pass: 383 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter