From: Christoph Niedermaier <cniedermaier@dh-electronics.com>
To: <linux-arm-kernel@lists.infradead.org>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>,
Shawn Guo <shawnguo@kernel.org>,
Fabio Estevam <festevam@gmail.com>, Marek Vasut <marex@denx.de>,
NXP Linux Team <linux-imx@nxp.com>, <kernel@dh-electronics.com>
Subject: [PATCH 00/20] ARM: dts: imx6q-dhcom: Fix/update PDK2 board and adding PicoITX and DRC02 board
Date: Wed, 26 May 2021 12:53:57 +0200 [thread overview]
Message-ID: <20210526105417.52996-1-cniedermaier@dh-electronics.com> (raw)
This patch series fixes and updates the DH PDK2 board with the DHCOM i.MX6Q SoM.
Addionally split the SoC-independent parts of the SoM and PDK2 into the
imx6qdl-dhcom-*.dtsi and reduce imx6q-dhcom-dpk2.dts to example of adding
i.MX6S/DL/D/Q variants of the SoM into a PDK2 carrier board.
Also adding the DT for DH PicoITX unit, which is a bare-bones carrier board for
the DHCOM. The board has ethernet port, USB, CAN, LEDs and a custom
board-to-board expansion connector.
Finally adding the DT for DH DRC02 unit, which is a universal controller device.
The system has two ethernet ports, two CANs, RS485 and RS232, USB, capacitive
buttons and an OLED display.
Christoph Niedermaier (20):
ARM: dts: imx6q-dhcom: Fix ethernet reset time properties
ARM: dts: imx6q-dhcom: Fix ethernet plugin detection problems
ARM: dts: imx6q-dhcom: Add gpios pinctrl for i2c bus recovery
ARM: dts: imx6q-dhcom: Add aliases for i2c, serial and rtc
ARM: dts: imx6q-dhcom: Add ethernet VIO regulator
ARM: dts: imx6q-dhcom: Add the parallel system bus
ARM: dts: imx6q-dhcom: Add interrupt and compatible to the ethernet
PHY
ARM: dts: imx6q-dhcom: Fill GPIO line names on DHCOM SoM
ARM: dts: imx6q-dhcom: Adding Wake pin to the PCIe pinctrl
ARM: dts: imx6q-dhcom: Align stdout-path with other DHCOM SoMs
ARM: dts: imx6q-dhcom: Add keys and leds to the PDK2 board
ARM: dts: imx6q-dhcom: Use 1G ethernet on the PDK2 board
ARM: dts: imx6q-dhcom: Rework of the DHCOM GPIO pinctrls
ARM: dts: imx6q-dhcom: Remove ddc-i2c-bus property
ARM: dts: imx6q-dhcom: Set minimum memory size of all DHCOM i.MX6
variants
ARM: dts: imx6q-dhcom: Rearrange of iomux
ARM: dts: imx6q-dhcom: Cleanup of the devicetrees
ARM: dts: imx6qdl-dhcom: Split SoC-independent parts of DHCOM SOM and
PDK2
ARM: dts: imx6qdl-dhcom: Add DHCOM based PicoITX board
ARM: dts: imx6qdl-dhcom: Add DHSOM based DRC02 board
arch/arm/boot/dts/Makefile | 4 +-
arch/arm/boot/dts/imx6dl-dhcom-picoitx.dts | 20 +
arch/arm/boot/dts/imx6q-dhcom-pdk2.dts | 270 +--------
arch/arm/boot/dts/imx6q-dhcom-som.dtsi | 487 ----------------
arch/arm/boot/dts/imx6qdl-dhcom-drc02.dtsi | 139 +++++
arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi | 357 ++++++++++++
arch/arm/boot/dts/imx6qdl-dhcom-picoitx.dtsi | 66 +++
arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi | 815 +++++++++++++++++++++++++++
arch/arm/boot/dts/imx6s-dhcom-drc02.dts | 32 ++
9 files changed, 1445 insertions(+), 745 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6dl-dhcom-picoitx.dts
delete mode 100644 arch/arm/boot/dts/imx6q-dhcom-som.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-dhcom-drc02.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-dhcom-picoitx.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi
create mode 100644 arch/arm/boot/dts/imx6s-dhcom-drc02.dts
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-05-26 13:15 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-26 10:53 Christoph Niedermaier [this message]
2021-05-26 10:53 ` [PATCH 01/20] ARM: dts: imx6q-dhcom: Fix ethernet reset time properties Christoph Niedermaier
2021-06-12 4:14 ` Shawn Guo
2021-05-26 10:53 ` [PATCH 02/20] ARM: dts: imx6q-dhcom: Fix ethernet plugin detection problems Christoph Niedermaier
2021-06-12 4:14 ` Shawn Guo
2021-05-26 10:54 ` [PATCH 03/20] ARM: dts: imx6q-dhcom: Add gpios pinctrl for i2c bus recovery Christoph Niedermaier
2021-06-12 4:15 ` Shawn Guo
2021-05-26 10:54 ` [PATCH 04/20] ARM: dts: imx6q-dhcom: Add aliases for i2c, serial and rtc Christoph Niedermaier
2021-06-12 4:16 ` Shawn Guo
2021-05-26 10:54 ` [PATCH 05/20] ARM: dts: imx6q-dhcom: Add ethernet VIO regulator Christoph Niedermaier
2021-06-12 4:17 ` Shawn Guo
2021-05-26 10:54 ` [PATCH 06/20] ARM: dts: imx6q-dhcom: Add the parallel system bus Christoph Niedermaier
2021-06-12 4:19 ` Shawn Guo
2021-06-16 13:20 ` Christoph Niedermaier
2021-05-26 10:54 ` [PATCH 07/20] ARM: dts: imx6q-dhcom: Add interrupt and compatible to the ethernet PHY Christoph Niedermaier
2021-05-26 10:54 ` [PATCH 08/20] ARM: dts: imx6q-dhcom: Fill GPIO line names on DHCOM SoM Christoph Niedermaier
2021-05-26 10:54 ` [PATCH 09/20] ARM: dts: imx6q-dhcom: Adding Wake pin to the PCIe pinctrl Christoph Niedermaier
2021-05-26 10:54 ` [PATCH 10/20] ARM: dts: imx6q-dhcom: Align stdout-path with other DHCOM SoMs Christoph Niedermaier
2021-05-26 10:54 ` [PATCH 11/20] ARM: dts: imx6q-dhcom: Add keys and leds to the PDK2 board Christoph Niedermaier
2021-05-26 10:54 ` [PATCH 12/20] ARM: dts: imx6q-dhcom: Use 1G ethernet on " Christoph Niedermaier
2021-05-26 10:54 ` [PATCH 13/20] ARM: dts: imx6q-dhcom: Rework of the DHCOM GPIO pinctrls Christoph Niedermaier
2021-05-26 10:54 ` [PATCH 14/20] ARM: dts: imx6q-dhcom: Remove ddc-i2c-bus property Christoph Niedermaier
2021-05-26 10:54 ` [PATCH 15/20] ARM: dts: imx6q-dhcom: Set minimum memory size of all DHCOM i.MX6 variants Christoph Niedermaier
2021-05-26 10:54 ` [PATCH 16/20] ARM: dts: imx6q-dhcom: Rearrange of iomux Christoph Niedermaier
2021-05-26 10:54 ` [PATCH 17/20] ARM: dts: imx6q-dhcom: Cleanup of the devicetrees Christoph Niedermaier
2021-05-26 10:54 ` [PATCH 18/20] ARM: dts: imx6qdl-dhcom: Split SoC-independent parts of DHCOM SOM and PDK2 Christoph Niedermaier
2021-05-26 10:54 ` [PATCH 19/20] ARM: dts: imx6qdl-dhcom: Add DHCOM based PicoITX board Christoph Niedermaier
2021-05-26 10:54 ` [PATCH 20/20] ARM: dts: imx6qdl-dhcom: Add DHSOM based DRC02 board Christoph Niedermaier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210526105417.52996-1-cniedermaier@dh-electronics.com \
--to=cniedermaier@dh-electronics.com \
--cc=festevam@gmail.com \
--cc=kernel@dh-electronics.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=marex@denx.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.