From: "Rafał Miłecki" <zajec5@gmail.com> To: "David S . Miller" <davem@davemloft.net>, Jakub Kicinski <kuba@kernel.org>, Rob Herring <robh+dt@kernel.org>, Florian Fainelli <f.fainelli@gmail.com> Cc: "Ray Jui" <rjui@broadcom.com>, "Scott Branden" <sbranden@broadcom.com>, bcm-kernel-feedback-list@broadcom.com, netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, "Rafał Miłecki" <rafal@milecki.pl> Subject: [PATCH net-next] dt-bindings: net: brcm,iproc-mdio: convert to the json-schema Date: Thu, 27 May 2021 22:28:15 +0200 [thread overview] Message-ID: <20210527202815.14313-1-zajec5@gmail.com> (raw) From: Rafał Miłecki <rafal@milecki.pl> This helps validating DTS files. Introduced changes: 1. Swapped #address-cells and #size-cells values 2. Renamed node: s/enet-gphy/ethernet-phy@/ Signed-off-by: Rafał Miłecki <rafal@milecki.pl> --- .../bindings/net/brcm,iproc-mdio.txt | 23 ----------- .../bindings/net/brcm,iproc-mdio.yaml | 38 +++++++++++++++++++ 2 files changed, 38 insertions(+), 23 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt create mode 100644 Documentation/devicetree/bindings/net/brcm,iproc-mdio.yaml diff --git a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt deleted file mode 100644 index 8ba9ed11d716..000000000000 --- a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt +++ /dev/null @@ -1,23 +0,0 @@ -* Broadcom iProc MDIO bus controller - -Required properties: -- compatible: should be "brcm,iproc-mdio" -- reg: address and length of the register set for the MDIO interface -- #size-cells: must be 1 -- #address-cells: must be 0 - -Child nodes of this MDIO bus controller node are standard Ethernet PHY device -nodes as described in Documentation/devicetree/bindings/net/phy.txt - -Example: - -mdio@18002000 { - compatible = "brcm,iproc-mdio"; - reg = <0x18002000 0x8>; - #size-cells = <1>; - #address-cells = <0>; - - enet-gphy@0 { - reg = <0>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.yaml b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.yaml new file mode 100644 index 000000000000..3031395f7e6e --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/brcm,iproc-mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom iProc MDIO bus controller + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +allOf: + - $ref: mdio.yaml# + +properties: + compatible: + const: brcm,iproc-mdio + + reg: + maxItems: 1 + +unevaluatedProperties: false + +required: + - reg + +examples: + - | + mdio@18002000 { + compatible = "brcm,iproc-mdio"; + reg = <0x18002000 0x8>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@0 { + reg = <0>; + }; + }; -- 2.26.2
WARNING: multiple messages have this Message-ID (diff)
From: "Rafał Miłecki" <zajec5@gmail.com> To: "David S . Miller" <davem@davemloft.net>, Jakub Kicinski <kuba@kernel.org>, Rob Herring <robh+dt@kernel.org>, Florian Fainelli <f.fainelli@gmail.com> Cc: "Ray Jui" <rjui@broadcom.com>, "Scott Branden" <sbranden@broadcom.com>, bcm-kernel-feedback-list@broadcom.com, netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, "Rafał Miłecki" <rafal@milecki.pl> Subject: [PATCH net-next] dt-bindings: net: brcm, iproc-mdio: convert to the json-schema Date: Thu, 27 May 2021 22:28:15 +0200 [thread overview] Message-ID: <20210527202815.14313-1-zajec5@gmail.com> (raw) From: Rafał Miłecki <rafal@milecki.pl> This helps validating DTS files. Introduced changes: 1. Swapped #address-cells and #size-cells values 2. Renamed node: s/enet-gphy/ethernet-phy@/ Signed-off-by: Rafał Miłecki <rafal@milecki.pl> --- .../bindings/net/brcm,iproc-mdio.txt | 23 ----------- .../bindings/net/brcm,iproc-mdio.yaml | 38 +++++++++++++++++++ 2 files changed, 38 insertions(+), 23 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt create mode 100644 Documentation/devicetree/bindings/net/brcm,iproc-mdio.yaml diff --git a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt deleted file mode 100644 index 8ba9ed11d716..000000000000 --- a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt +++ /dev/null @@ -1,23 +0,0 @@ -* Broadcom iProc MDIO bus controller - -Required properties: -- compatible: should be "brcm,iproc-mdio" -- reg: address and length of the register set for the MDIO interface -- #size-cells: must be 1 -- #address-cells: must be 0 - -Child nodes of this MDIO bus controller node are standard Ethernet PHY device -nodes as described in Documentation/devicetree/bindings/net/phy.txt - -Example: - -mdio@18002000 { - compatible = "brcm,iproc-mdio"; - reg = <0x18002000 0x8>; - #size-cells = <1>; - #address-cells = <0>; - - enet-gphy@0 { - reg = <0>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.yaml b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.yaml new file mode 100644 index 000000000000..3031395f7e6e --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/brcm,iproc-mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom iProc MDIO bus controller + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +allOf: + - $ref: mdio.yaml# + +properties: + compatible: + const: brcm,iproc-mdio + + reg: + maxItems: 1 + +unevaluatedProperties: false + +required: + - reg + +examples: + - | + mdio@18002000 { + compatible = "brcm,iproc-mdio"; + reg = <0x18002000 0x8>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@0 { + reg = <0>; + }; + }; -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-05-27 20:28 UTC|newest] Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-05-27 20:28 Rafał Miłecki [this message] 2021-05-27 20:28 ` [PATCH net-next] dt-bindings: net: brcm, iproc-mdio: convert to the json-schema Rafał Miłecki
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210527202815.14313-1-zajec5@gmail.com \ --to=zajec5@gmail.com \ --cc=bcm-kernel-feedback-list@broadcom.com \ --cc=davem@davemloft.net \ --cc=devicetree@vger.kernel.org \ --cc=f.fainelli@gmail.com \ --cc=kuba@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=netdev@vger.kernel.org \ --cc=rafal@milecki.pl \ --cc=rjui@broadcom.com \ --cc=robh+dt@kernel.org \ --cc=sbranden@broadcom.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.