[PATCH v2 0/4] kernel: fix some spelling mistakes

[PATCH v2 0/4] kernel: fix some spelling mistakes

[Zhen Lei]

v1 --> v2:
Split into several small patches and add fixes to header files. Since there are
so many patches after the split, only three reviewed modules and one time module
with relatively more changes are retained. The spelling mistakes on the rest of
the modules will be fixed in later versions.

The header file linux/freelist.h is only included by linux/kprobes.h, so grouped
it with kprobes.c

Zhen Lei (4):
  kprobes: Fix spelling mistakes
  kgdb: Fix spelling mistakes
  kexec: fix a spelling mistake in comment
  time: Fix spelling mistakes

 include/linux/freelist.h       | 2 +-
 include/linux/kgdb.h           | 8 ++++----
 include/linux/timekeeping.h    | 2 +-
 include/linux/timer.h          | 2 +-
 kernel/debug/debug_core.c      | 2 +-
 kernel/debug/kdb/kdb_main.c    | 8 ++++----
 kernel/debug/kdb/kdb_private.h | 2 +-
 kernel/kexec_core.c            | 2 +-
 kernel/kprobes.c               | 2 +-
 kernel/time/alarmtimer.c       | 2 +-
 kernel/time/timer.c            | 4 ++--
 11 files changed, 18 insertions(+), 18 deletions(-)

-- 
2.25.1

[PATCH v2 0/4] kernel: fix some spelling mistakes

[Zhen Lei]

v1 --> v2:
Split into several small patches and add fixes to header files. Since there are
so many patches after the split, only three reviewed modules and one time module
with relatively more changes are retained. The spelling mistakes on the rest of
the modules will be fixed in later versions.

The header file linux/freelist.h is only included by linux/kprobes.h, so grouped
it with kprobes.c

Zhen Lei (4):
  kprobes: Fix spelling mistakes
  kgdb: Fix spelling mistakes
  kexec: fix a spelling mistake in comment
  time: Fix spelling mistakes

 include/linux/freelist.h       | 2 +-
 include/linux/kgdb.h           | 8 ++++----
 include/linux/timekeeping.h    | 2 +-
 include/linux/timer.h          | 2 +-
 kernel/debug/debug_core.c      | 2 +-
 kernel/debug/kdb/kdb_main.c    | 8 ++++----
 kernel/debug/kdb/kdb_private.h | 2 +-
 kernel/kexec_core.c            | 2 +-
 kernel/kprobes.c               | 2 +-
 kernel/time/alarmtimer.c       | 2 +-
 kernel/time/timer.c            | 4 ++--
 11 files changed, 18 insertions(+), 18 deletions(-)

-- 
2.25.1



_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

[PATCH v2 1/4] kprobes: Fix spelling mistakes

[Zhen Lei]

Fix some spelling mistakes in comments:
decrese ==> decrease
immmediately ==> immediately

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
 include/linux/freelist.h | 2 +-
 kernel/kprobes.c         | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/linux/freelist.h b/include/linux/freelist.h
index fc1842b96469..1811c1f3f8cb 100644
--- a/include/linux/freelist.h
+++ b/include/linux/freelist.h
@@ -39,7 +39,7 @@ static inline void __freelist_add(struct freelist_node *node, struct freelist_he
 	 * and a refcount increment of a node in try_get, then back up to
 	 * something non-zero, then the refcount increment is done by the other
 	 * thread) -- so if the CAS to add the node to the actual list fails,
-	 * decrese the refcount and leave the add operation to the next thread
+	 * decrease the refcount and leave the add operation to the next thread
 	 * who puts the refcount back to zero (which could be us, hence the
 	 * loop).
 	 */
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 8c0a6fdef771..d4156082d5a5 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -641,7 +641,7 @@ void wait_for_kprobe_optimizer(void)
 	while (!list_empty(&optimizing_list) || !list_empty(&unoptimizing_list)) {
 		mutex_unlock(&kprobe_mutex);
 
-		/* this will also make optimizing_work execute immmediately */
+		/* this will also make optimizing_work execute immediately */
 		flush_delayed_work(&optimizing_work);
 		/* @optimizing_work might not have been queued yet, relax */
 		cpu_relax();
-- 
2.25.1

[PATCH v2 1/4] kprobes: Fix spelling mistakes

[Zhen Lei]

Fix some spelling mistakes in comments:
decrese ==> decrease
immmediately ==> immediately

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
 include/linux/freelist.h | 2 +-
 kernel/kprobes.c         | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/linux/freelist.h b/include/linux/freelist.h
index fc1842b96469..1811c1f3f8cb 100644
--- a/include/linux/freelist.h
+++ b/include/linux/freelist.h
@@ -39,7 +39,7 @@ static inline void __freelist_add(struct freelist_node *node, struct freelist_he
 	 * and a refcount increment of a node in try_get, then back up to
 	 * something non-zero, then the refcount increment is done by the other
 	 * thread) -- so if the CAS to add the node to the actual list fails,
-	 * decrese the refcount and leave the add operation to the next thread
+	 * decrease the refcount and leave the add operation to the next thread
 	 * who puts the refcount back to zero (which could be us, hence the
 	 * loop).
 	 */
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 8c0a6fdef771..d4156082d5a5 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -641,7 +641,7 @@ void wait_for_kprobe_optimizer(void)
 	while (!list_empty(&optimizing_list) || !list_empty(&unoptimizing_list)) {
 		mutex_unlock(&kprobe_mutex);
 
-		/* this will also make optimizing_work execute immmediately */
+		/* this will also make optimizing_work execute immediately */
 		flush_delayed_work(&optimizing_work);
 		/* @optimizing_work might not have been queued yet, relax */
 		cpu_relax();
-- 
2.25.1



_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

Re: [PATCH v2 1/4] kprobes: Fix spelling mistakes

[Masami Hiramatsu]

On Sat, 29 May 2021 19:03:02 +0800
Zhen Lei <thunder.leizhen@huawei.com> wrote:

> Fix some spelling mistakes in comments:
> decrese ==> decrease
> immmediately ==> immediately

This looks good to me.

Acked-by: Masami Hiramatsu <mhiramat@kernel.org>

Thanks!

> 
> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
> ---
>  include/linux/freelist.h | 2 +-
>  kernel/kprobes.c         | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/include/linux/freelist.h b/include/linux/freelist.h
> index fc1842b96469..1811c1f3f8cb 100644
> --- a/include/linux/freelist.h
> +++ b/include/linux/freelist.h
> @@ -39,7 +39,7 @@ static inline void __freelist_add(struct freelist_node *node, struct freelist_he
>  	 * and a refcount increment of a node in try_get, then back up to
>  	 * something non-zero, then the refcount increment is done by the other
>  	 * thread) -- so if the CAS to add the node to the actual list fails,
> -	 * decrese the refcount and leave the add operation to the next thread
> +	 * decrease the refcount and leave the add operation to the next thread
>  	 * who puts the refcount back to zero (which could be us, hence the
>  	 * loop).
>  	 */
> diff --git a/kernel/kprobes.c b/kernel/kprobes.c
> index 8c0a6fdef771..d4156082d5a5 100644
> --- a/kernel/kprobes.c
> +++ b/kernel/kprobes.c
> @@ -641,7 +641,7 @@ void wait_for_kprobe_optimizer(void)
>  	while (!list_empty(&optimizing_list) || !list_empty(&unoptimizing_list)) {
>  		mutex_unlock(&kprobe_mutex);
>  
> -		/* this will also make optimizing_work execute immmediately */
> +		/* this will also make optimizing_work execute immediately */
>  		flush_delayed_work(&optimizing_work);
>  		/* @optimizing_work might not have been queued yet, relax */
>  		cpu_relax();
> -- 
> 2.25.1
> 
> 


-- 
Masami Hiramatsu <mhiramat@kernel.org>

Re: [PATCH v2 1/4] kprobes: Fix spelling mistakes

[Masami Hiramatsu]

On Sat, 29 May 2021 19:03:02 +0800
Zhen Lei <thunder.leizhen@huawei.com> wrote:

> Fix some spelling mistakes in comments:
> decrese ==> decrease
> immmediately ==> immediately

This looks good to me.

Acked-by: Masami Hiramatsu <mhiramat@kernel.org>

Thanks!

> 
> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
> ---
>  include/linux/freelist.h | 2 +-
>  kernel/kprobes.c         | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/include/linux/freelist.h b/include/linux/freelist.h
> index fc1842b96469..1811c1f3f8cb 100644
> --- a/include/linux/freelist.h
> +++ b/include/linux/freelist.h
> @@ -39,7 +39,7 @@ static inline void __freelist_add(struct freelist_node *node, struct freelist_he
>  	 * and a refcount increment of a node in try_get, then back up to
>  	 * something non-zero, then the refcount increment is done by the other
>  	 * thread) -- so if the CAS to add the node to the actual list fails,
> -	 * decrese the refcount and leave the add operation to the next thread
> +	 * decrease the refcount and leave the add operation to the next thread
>  	 * who puts the refcount back to zero (which could be us, hence the
>  	 * loop).
>  	 */
> diff --git a/kernel/kprobes.c b/kernel/kprobes.c
> index 8c0a6fdef771..d4156082d5a5 100644
> --- a/kernel/kprobes.c
> +++ b/kernel/kprobes.c
> @@ -641,7 +641,7 @@ void wait_for_kprobe_optimizer(void)
>  	while (!list_empty(&optimizing_list) || !list_empty(&unoptimizing_list)) {
>  		mutex_unlock(&kprobe_mutex);
>  
> -		/* this will also make optimizing_work execute immmediately */
> +		/* this will also make optimizing_work execute immediately */
>  		flush_delayed_work(&optimizing_work);
>  		/* @optimizing_work might not have been queued yet, relax */
>  		cpu_relax();
> -- 
> 2.25.1
> 
> 


-- 
Masami Hiramatsu <mhiramat@kernel.org>

_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

[PATCH v2 2/4] kgdb: Fix spelling mistakes

[Zhen Lei]

Fix some spelling mistakes in comments:
initalization ==> initialization
detatch ==> detach
represntation ==> representation
hexidecimal ==> hexadecimal
delimeter ==> delimiter
architecure ==> architecture

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
 include/linux/kgdb.h           | 8 ++++----
 kernel/debug/debug_core.c      | 2 +-
 kernel/debug/kdb/kdb_main.c    | 8 ++++----
 kernel/debug/kdb/kdb_private.h | 2 +-
 4 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h
index 392a3670944c..258cdde8d356 100644
--- a/include/linux/kgdb.h
+++ b/include/linux/kgdb.h
@@ -105,9 +105,9 @@ extern int dbg_set_reg(int regno, void *mem, struct pt_regs *regs);
  */
 
 /**
- *	kgdb_arch_init - Perform any architecture specific initalization.
+ *	kgdb_arch_init - Perform any architecture specific initialization.
  *
- *	This function will handle the initalization of any architecture
+ *	This function will handle the initialization of any architecture
  *	specific callbacks.
  */
 extern int kgdb_arch_init(void);
@@ -229,9 +229,9 @@ extern int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt);
 extern int kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt);
 
 /**
- *	kgdb_arch_late - Perform any architecture specific initalization.
+ *	kgdb_arch_late - Perform any architecture specific initialization.
  *
- *	This function will handle the late initalization of any
+ *	This function will handle the late initialization of any
  *	architecture specific callbacks.  This is an optional function for
  *	handling things like late initialization of hw breakpoints.  The
  *	default implementation does nothing.
diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index 4708aec492df..a1f26766eb90 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -1032,7 +1032,7 @@ dbg_notify_reboot(struct notifier_block *this, unsigned long code, void *x)
 	/*
 	 * Take the following action on reboot notify depending on value:
 	 *    1 == Enter debugger
-	 *    0 == [the default] detatch debug client
+	 *    0 == [the default] detach debug client
 	 *   -1 == Do nothing... and use this until the board resets
 	 */
 	switch (kgdbreboot) {
diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
index 622410c45da1..d8ee5647b732 100644
--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
@@ -253,7 +253,7 @@ static char *kdballocenv(size_t bytes)
  * Parameters:
  *	match	A character string representing a numeric value
  * Outputs:
- *	*value  the unsigned long represntation of the env variable 'match'
+ *	*value  the unsigned long representation of the env variable 'match'
  * Returns:
  *	Zero on success, a kdb diagnostic on failure.
  */
@@ -356,7 +356,7 @@ static void kdb_printenv(void)
  * Parameters:
  *	arg	A character string representing a numeric value
  * Outputs:
- *	*value  the unsigned long represntation of arg.
+ *	*value  the unsigned long representation of arg.
  * Returns:
  *	Zero on success, a kdb diagnostic on failure.
  */
@@ -470,7 +470,7 @@ static int kdb_check_regs(void)
  *	symbol name, and offset to the caller.
  *
  *	The argument may consist of a numeric value (decimal or
- *	hexidecimal), a symbol name, a register name (preceded by the
+ *	hexadecimal), a symbol name, a register name (preceded by the
  *	percent sign), an environment variable with a numeric value
  *	(preceded by a dollar sign) or a simple arithmetic expression
  *	consisting of a symbol name, +/-, and a numeric constant value
@@ -894,7 +894,7 @@ static void parse_grep(const char *str)
  *	Limited to 20 tokens.
  *
  *	Real rudimentary tokenization. Basically only whitespace
- *	is considered a token delimeter (but special consideration
+ *	is considered a token delimiter (but special consideration
  *	is taken of the '=' sign as used by the 'set' command).
  *
  *	The algorithm used to tokenize the input string relies on
diff --git a/kernel/debug/kdb/kdb_private.h b/kernel/debug/kdb/kdb_private.h
index ccbed9089808..170c69aedebb 100644
--- a/kernel/debug/kdb/kdb_private.h
+++ b/kernel/debug/kdb/kdb_private.h
@@ -64,7 +64,7 @@
 
 /*
  * KDB_MAXBPT describes the total number of breakpoints
- * supported by this architecure.
+ * supported by this architecture.
  */
 #define KDB_MAXBPT	16
 
-- 
2.25.1

[PATCH v2 2/4] kgdb: Fix spelling mistakes

[Zhen Lei]

Fix some spelling mistakes in comments:
initalization ==> initialization
detatch ==> detach
represntation ==> representation
hexidecimal ==> hexadecimal
delimeter ==> delimiter
architecure ==> architecture

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
 include/linux/kgdb.h           | 8 ++++----
 kernel/debug/debug_core.c      | 2 +-
 kernel/debug/kdb/kdb_main.c    | 8 ++++----
 kernel/debug/kdb/kdb_private.h | 2 +-
 4 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h
index 392a3670944c..258cdde8d356 100644
--- a/include/linux/kgdb.h
+++ b/include/linux/kgdb.h
@@ -105,9 +105,9 @@ extern int dbg_set_reg(int regno, void *mem, struct pt_regs *regs);
  */
 
 /**
- *	kgdb_arch_init - Perform any architecture specific initalization.
+ *	kgdb_arch_init - Perform any architecture specific initialization.
  *
- *	This function will handle the initalization of any architecture
+ *	This function will handle the initialization of any architecture
  *	specific callbacks.
  */
 extern int kgdb_arch_init(void);
@@ -229,9 +229,9 @@ extern int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt);
 extern int kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt);
 
 /**
- *	kgdb_arch_late - Perform any architecture specific initalization.
+ *	kgdb_arch_late - Perform any architecture specific initialization.
  *
- *	This function will handle the late initalization of any
+ *	This function will handle the late initialization of any
  *	architecture specific callbacks.  This is an optional function for
  *	handling things like late initialization of hw breakpoints.  The
  *	default implementation does nothing.
diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index 4708aec492df..a1f26766eb90 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -1032,7 +1032,7 @@ dbg_notify_reboot(struct notifier_block *this, unsigned long code, void *x)
 	/*
 	 * Take the following action on reboot notify depending on value:
 	 *    1 == Enter debugger
-	 *    0 == [the default] detatch debug client
+	 *    0 == [the default] detach debug client
 	 *   -1 == Do nothing... and use this until the board resets
 	 */
 	switch (kgdbreboot) {
diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
index 622410c45da1..d8ee5647b732 100644
--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
@@ -253,7 +253,7 @@ static char *kdballocenv(size_t bytes)
  * Parameters:
  *	match	A character string representing a numeric value
  * Outputs:
- *	*value  the unsigned long represntation of the env variable 'match'
+ *	*value  the unsigned long representation of the env variable 'match'
  * Returns:
  *	Zero on success, a kdb diagnostic on failure.
  */
@@ -356,7 +356,7 @@ static void kdb_printenv(void)
  * Parameters:
  *	arg	A character string representing a numeric value
  * Outputs:
- *	*value  the unsigned long represntation of arg.
+ *	*value  the unsigned long representation of arg.
  * Returns:
  *	Zero on success, a kdb diagnostic on failure.
  */
@@ -470,7 +470,7 @@ static int kdb_check_regs(void)
  *	symbol name, and offset to the caller.
  *
  *	The argument may consist of a numeric value (decimal or
- *	hexidecimal), a symbol name, a register name (preceded by the
+ *	hexadecimal), a symbol name, a register name (preceded by the
  *	percent sign), an environment variable with a numeric value
  *	(preceded by a dollar sign) or a simple arithmetic expression
  *	consisting of a symbol name, +/-, and a numeric constant value
@@ -894,7 +894,7 @@ static void parse_grep(const char *str)
  *	Limited to 20 tokens.
  *
  *	Real rudimentary tokenization. Basically only whitespace
- *	is considered a token delimeter (but special consideration
+ *	is considered a token delimiter (but special consideration
  *	is taken of the '=' sign as used by the 'set' command).
  *
  *	The algorithm used to tokenize the input string relies on
diff --git a/kernel/debug/kdb/kdb_private.h b/kernel/debug/kdb/kdb_private.h
index ccbed9089808..170c69aedebb 100644
--- a/kernel/debug/kdb/kdb_private.h
+++ b/kernel/debug/kdb/kdb_private.h
@@ -64,7 +64,7 @@
 
 /*
  * KDB_MAXBPT describes the total number of breakpoints
- * supported by this architecure.
+ * supported by this architecture.
  */
 #define KDB_MAXBPT	16
 
-- 
2.25.1



_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

Re: [PATCH v2 2/4] kgdb: Fix spelling mistakes

[Daniel Thompson]

On Sat, May 29, 2021 at 07:03:03PM +0800, Zhen Lei wrote:
> Fix some spelling mistakes in comments:
> initalization ==> initialization
> detatch ==> detach
> represntation ==> representation
> hexidecimal ==> hexadecimal
> delimeter ==> delimiter
> architecure ==> architecture
> 
> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>

Applied, thanks.


> ---
>  include/linux/kgdb.h           | 8 ++++----
>  kernel/debug/debug_core.c      | 2 +-
>  kernel/debug/kdb/kdb_main.c    | 8 ++++----
>  kernel/debug/kdb/kdb_private.h | 2 +-
>  4 files changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h
> index 392a3670944c..258cdde8d356 100644
> --- a/include/linux/kgdb.h
> +++ b/include/linux/kgdb.h
> @@ -105,9 +105,9 @@ extern int dbg_set_reg(int regno, void *mem, struct pt_regs *regs);
>   */
>  
>  /**
> - *	kgdb_arch_init - Perform any architecture specific initalization.
> + *	kgdb_arch_init - Perform any architecture specific initialization.
>   *
> - *	This function will handle the initalization of any architecture
> + *	This function will handle the initialization of any architecture
>   *	specific callbacks.
>   */
>  extern int kgdb_arch_init(void);
> @@ -229,9 +229,9 @@ extern int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt);
>  extern int kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt);
>  
>  /**
> - *	kgdb_arch_late - Perform any architecture specific initalization.
> + *	kgdb_arch_late - Perform any architecture specific initialization.
>   *
> - *	This function will handle the late initalization of any
> + *	This function will handle the late initialization of any
>   *	architecture specific callbacks.  This is an optional function for
>   *	handling things like late initialization of hw breakpoints.  The
>   *	default implementation does nothing.
> diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
> index 4708aec492df..a1f26766eb90 100644
> --- a/kernel/debug/debug_core.c
> +++ b/kernel/debug/debug_core.c
> @@ -1032,7 +1032,7 @@ dbg_notify_reboot(struct notifier_block *this, unsigned long code, void *x)
>  	/*
>  	 * Take the following action on reboot notify depending on value:
>  	 *    1 == Enter debugger
> -	 *    0 == [the default] detatch debug client
> +	 *    0 == [the default] detach debug client
>  	 *   -1 == Do nothing... and use this until the board resets
>  	 */
>  	switch (kgdbreboot) {
> diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
> index 622410c45da1..d8ee5647b732 100644
> --- a/kernel/debug/kdb/kdb_main.c
> +++ b/kernel/debug/kdb/kdb_main.c
> @@ -253,7 +253,7 @@ static char *kdballocenv(size_t bytes)
>   * Parameters:
>   *	match	A character string representing a numeric value
>   * Outputs:
> - *	*value  the unsigned long represntation of the env variable 'match'
> + *	*value  the unsigned long representation of the env variable 'match'
>   * Returns:
>   *	Zero on success, a kdb diagnostic on failure.
>   */
> @@ -356,7 +356,7 @@ static void kdb_printenv(void)
>   * Parameters:
>   *	arg	A character string representing a numeric value
>   * Outputs:
> - *	*value  the unsigned long represntation of arg.
> + *	*value  the unsigned long representation of arg.
>   * Returns:
>   *	Zero on success, a kdb diagnostic on failure.
>   */
> @@ -470,7 +470,7 @@ static int kdb_check_regs(void)
>   *	symbol name, and offset to the caller.
>   *
>   *	The argument may consist of a numeric value (decimal or
> - *	hexidecimal), a symbol name, a register name (preceded by the
> + *	hexadecimal), a symbol name, a register name (preceded by the
>   *	percent sign), an environment variable with a numeric value
>   *	(preceded by a dollar sign) or a simple arithmetic expression
>   *	consisting of a symbol name, +/-, and a numeric constant value
> @@ -894,7 +894,7 @@ static void parse_grep(const char *str)
>   *	Limited to 20 tokens.
>   *
>   *	Real rudimentary tokenization. Basically only whitespace
> - *	is considered a token delimeter (but special consideration
> + *	is considered a token delimiter (but special consideration
>   *	is taken of the '=' sign as used by the 'set' command).
>   *
>   *	The algorithm used to tokenize the input string relies on
> diff --git a/kernel/debug/kdb/kdb_private.h b/kernel/debug/kdb/kdb_private.h
> index ccbed9089808..170c69aedebb 100644
> --- a/kernel/debug/kdb/kdb_private.h
> +++ b/kernel/debug/kdb/kdb_private.h
> @@ -64,7 +64,7 @@
>  
>  /*
>   * KDB_MAXBPT describes the total number of breakpoints
> - * supported by this architecure.
> + * supported by this architecture.
>   */
>  #define KDB_MAXBPT	16
>  
> -- 
> 2.25.1

Re: [PATCH v2 2/4] kgdb: Fix spelling mistakes

[Daniel Thompson]

On Sat, May 29, 2021 at 07:03:03PM +0800, Zhen Lei wrote:
> Fix some spelling mistakes in comments:
> initalization ==> initialization
> detatch ==> detach
> represntation ==> representation
> hexidecimal ==> hexadecimal
> delimeter ==> delimiter
> architecure ==> architecture
> 
> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>

Applied, thanks.


> ---
>  include/linux/kgdb.h           | 8 ++++----
>  kernel/debug/debug_core.c      | 2 +-
>  kernel/debug/kdb/kdb_main.c    | 8 ++++----
>  kernel/debug/kdb/kdb_private.h | 2 +-
>  4 files changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h
> index 392a3670944c..258cdde8d356 100644
> --- a/include/linux/kgdb.h
> +++ b/include/linux/kgdb.h
> @@ -105,9 +105,9 @@ extern int dbg_set_reg(int regno, void *mem, struct pt_regs *regs);
>   */
>  
>  /**
> - *	kgdb_arch_init - Perform any architecture specific initalization.
> + *	kgdb_arch_init - Perform any architecture specific initialization.
>   *
> - *	This function will handle the initalization of any architecture
> + *	This function will handle the initialization of any architecture
>   *	specific callbacks.
>   */
>  extern int kgdb_arch_init(void);
> @@ -229,9 +229,9 @@ extern int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt);
>  extern int kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt);
>  
>  /**
> - *	kgdb_arch_late - Perform any architecture specific initalization.
> + *	kgdb_arch_late - Perform any architecture specific initialization.
>   *
> - *	This function will handle the late initalization of any
> + *	This function will handle the late initialization of any
>   *	architecture specific callbacks.  This is an optional function for
>   *	handling things like late initialization of hw breakpoints.  The
>   *	default implementation does nothing.
> diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
> index 4708aec492df..a1f26766eb90 100644
> --- a/kernel/debug/debug_core.c
> +++ b/kernel/debug/debug_core.c
> @@ -1032,7 +1032,7 @@ dbg_notify_reboot(struct notifier_block *this, unsigned long code, void *x)
>  	/*
>  	 * Take the following action on reboot notify depending on value:
>  	 *    1 == Enter debugger
> -	 *    0 == [the default] detatch debug client
> +	 *    0 == [the default] detach debug client
>  	 *   -1 == Do nothing... and use this until the board resets
>  	 */
>  	switch (kgdbreboot) {
> diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
> index 622410c45da1..d8ee5647b732 100644
> --- a/kernel/debug/kdb/kdb_main.c
> +++ b/kernel/debug/kdb/kdb_main.c
> @@ -253,7 +253,7 @@ static char *kdballocenv(size_t bytes)
>   * Parameters:
>   *	match	A character string representing a numeric value
>   * Outputs:
> - *	*value  the unsigned long represntation of the env variable 'match'
> + *	*value  the unsigned long representation of the env variable 'match'
>   * Returns:
>   *	Zero on success, a kdb diagnostic on failure.
>   */
> @@ -356,7 +356,7 @@ static void kdb_printenv(void)
>   * Parameters:
>   *	arg	A character string representing a numeric value
>   * Outputs:
> - *	*value  the unsigned long represntation of arg.
> + *	*value  the unsigned long representation of arg.
>   * Returns:
>   *	Zero on success, a kdb diagnostic on failure.
>   */
> @@ -470,7 +470,7 @@ static int kdb_check_regs(void)
>   *	symbol name, and offset to the caller.
>   *
>   *	The argument may consist of a numeric value (decimal or
> - *	hexidecimal), a symbol name, a register name (preceded by the
> + *	hexadecimal), a symbol name, a register name (preceded by the
>   *	percent sign), an environment variable with a numeric value
>   *	(preceded by a dollar sign) or a simple arithmetic expression
>   *	consisting of a symbol name, +/-, and a numeric constant value
> @@ -894,7 +894,7 @@ static void parse_grep(const char *str)
>   *	Limited to 20 tokens.
>   *
>   *	Real rudimentary tokenization. Basically only whitespace
> - *	is considered a token delimeter (but special consideration
> + *	is considered a token delimiter (but special consideration
>   *	is taken of the '=' sign as used by the 'set' command).
>   *
>   *	The algorithm used to tokenize the input string relies on
> diff --git a/kernel/debug/kdb/kdb_private.h b/kernel/debug/kdb/kdb_private.h
> index ccbed9089808..170c69aedebb 100644
> --- a/kernel/debug/kdb/kdb_private.h
> +++ b/kernel/debug/kdb/kdb_private.h
> @@ -64,7 +64,7 @@
>  
>  /*
>   * KDB_MAXBPT describes the total number of breakpoints
> - * supported by this architecure.
> + * supported by this architecture.
>   */
>  #define KDB_MAXBPT	16
>  
> -- 
> 2.25.1

_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

[PATCH v2 3/4] kexec: fix a spelling mistake in comment

[Zhen Lei]

alloed ==> allowed

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 kernel/kexec_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/kexec_core.c b/kernel/kexec_core.c
index 4b34a9aa32bc..21d44f7ae8a8 100644
--- a/kernel/kexec_core.c
+++ b/kernel/kexec_core.c
@@ -180,7 +180,7 @@ int sanity_check_segment_list(struct kimage *image)
 	}
 
 	/* Verify our destination addresses do not overlap.
-	 * If we alloed overlapping destination addresses
+	 * If we allowed overlapping destination addresses
 	 * through very weird things can happen with no
 	 * easy explanation as one segment stops on another.
 	 */
-- 
2.25.1

[PATCH v2 3/4] kexec: fix a spelling mistake in comment

[Zhen Lei]

alloed ==> allowed

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
 kernel/kexec_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/kexec_core.c b/kernel/kexec_core.c
index 4b34a9aa32bc..21d44f7ae8a8 100644
--- a/kernel/kexec_core.c
+++ b/kernel/kexec_core.c
@@ -180,7 +180,7 @@ int sanity_check_segment_list(struct kimage *image)
 	}
 
 	/* Verify our destination addresses do not overlap.
-	 * If we alloed overlapping destination addresses
+	 * If we allowed overlapping destination addresses
 	 * through very weird things can happen with no
 	 * easy explanation as one segment stops on another.
 	 */
-- 
2.25.1



_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

[PATCH v2 4/4] time: Fix spelling mistakes

[Zhen Lei]

Fix some spelling mistakes in comments:
wit ==> with
initialy ==> initially
syncrhonized ==> synchronized
therefor ==> therefore

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
 include/linux/timekeeping.h | 2 +-
 include/linux/timer.h       | 2 +-
 kernel/time/alarmtimer.c    | 2 +-
 kernel/time/timer.c         | 4 ++--
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/include/linux/timekeeping.h b/include/linux/timekeeping.h
index 78a98bdff76d..01bd6ff322be 100644
--- a/include/linux/timekeeping.h
+++ b/include/linux/timekeeping.h
@@ -28,7 +28,7 @@ extern int do_sys_settimeofday64(const struct timespec64 *tv,
  * For other references, use the functions with "real", "clocktai",
  * "boottime" and "raw" suffixes.
  *
- * To get the time in a different format, use the ones wit
+ * To get the time in a different format, use the ones with
  * "ns", "ts64" and "seconds" suffix.
  *
  * See Documentation/core-api/timekeeping.rst for more details.
diff --git a/include/linux/timer.h b/include/linux/timer.h
index fda13c9d1256..a7f7c7cac4c0 100644
--- a/include/linux/timer.h
+++ b/include/linux/timer.h
@@ -56,7 +56,7 @@ struct timer_list {
  *
  * Note: Because enqueuing of timers can migrate the timer from one
  * CPU to another, pinned timers are not guaranteed to stay on the
- * initialy selected CPU.  They move to the CPU on which the enqueue
+ * initially selected CPU.  They move to the CPU on which the enqueue
  * function is invoked via mod_timer() or add_timer().  If the timer
  * should be placed on a particular CPU, then add_timer_on() has to be
  * used.
diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c
index 5897828b9d7e..a400139b9a9c 100644
--- a/kernel/time/alarmtimer.c
+++ b/kernel/time/alarmtimer.c
@@ -35,7 +35,7 @@
 
 /**
  * struct alarm_base - Alarm timer bases
- * @lock:		Lock for syncrhonized access to the base
+ * @lock:		Lock for synchronized access to the base
  * @timerqueue:		Timerqueue head managing the list of events
  * @get_ktime:		Function to read the time correlating to the base
  * @get_timespec:	Function to read the namespace time correlating to the base
diff --git a/kernel/time/timer.c b/kernel/time/timer.c
index 84332f01dc57..df6585281713 100644
--- a/kernel/time/timer.c
+++ b/kernel/time/timer.c
@@ -62,7 +62,7 @@ EXPORT_SYMBOL(jiffies_64);
 
 /*
  * The timer wheel has LVL_DEPTH array levels. Each level provides an array of
- * LVL_SIZE buckets. Each level is driven by its own clock and therefor each
+ * LVL_SIZE buckets. Each level is driven by its own clock and therefore each
  * level has a different granularity.
  *
  * The level granularity is:		LVL_CLK_DIV ^ lvl
@@ -70,7 +70,7 @@ EXPORT_SYMBOL(jiffies_64);
  *
  * The array level of a newly armed timer depends on the relative expiry
  * time. The farther the expiry time is away the higher the array level and
- * therefor the granularity becomes.
+ * therefore the granularity becomes.
  *
  * Contrary to the original timer wheel implementation, which aims for 'exact'
  * expiry of the timers, this implementation removes the need for recascading
-- 
2.25.1

[PATCH v2 4/4] time: Fix spelling mistakes

[Zhen Lei]

Fix some spelling mistakes in comments:
wit ==> with
initialy ==> initially
syncrhonized ==> synchronized
therefor ==> therefore

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
 include/linux/timekeeping.h | 2 +-
 include/linux/timer.h       | 2 +-
 kernel/time/alarmtimer.c    | 2 +-
 kernel/time/timer.c         | 4 ++--
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/include/linux/timekeeping.h b/include/linux/timekeeping.h
index 78a98bdff76d..01bd6ff322be 100644
--- a/include/linux/timekeeping.h
+++ b/include/linux/timekeeping.h
@@ -28,7 +28,7 @@ extern int do_sys_settimeofday64(const struct timespec64 *tv,
  * For other references, use the functions with "real", "clocktai",
  * "boottime" and "raw" suffixes.
  *
- * To get the time in a different format, use the ones wit
+ * To get the time in a different format, use the ones with
  * "ns", "ts64" and "seconds" suffix.
  *
  * See Documentation/core-api/timekeeping.rst for more details.
diff --git a/include/linux/timer.h b/include/linux/timer.h
index fda13c9d1256..a7f7c7cac4c0 100644
--- a/include/linux/timer.h
+++ b/include/linux/timer.h
@@ -56,7 +56,7 @@ struct timer_list {
  *
  * Note: Because enqueuing of timers can migrate the timer from one
  * CPU to another, pinned timers are not guaranteed to stay on the
- * initialy selected CPU.  They move to the CPU on which the enqueue
+ * initially selected CPU.  They move to the CPU on which the enqueue
  * function is invoked via mod_timer() or add_timer().  If the timer
  * should be placed on a particular CPU, then add_timer_on() has to be
  * used.
diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c
index 5897828b9d7e..a400139b9a9c 100644
--- a/kernel/time/alarmtimer.c
+++ b/kernel/time/alarmtimer.c
@@ -35,7 +35,7 @@
 
 /**
  * struct alarm_base - Alarm timer bases
- * @lock:		Lock for syncrhonized access to the base
+ * @lock:		Lock for synchronized access to the base
  * @timerqueue:		Timerqueue head managing the list of events
  * @get_ktime:		Function to read the time correlating to the base
  * @get_timespec:	Function to read the namespace time correlating to the base
diff --git a/kernel/time/timer.c b/kernel/time/timer.c
index 84332f01dc57..df6585281713 100644
--- a/kernel/time/timer.c
+++ b/kernel/time/timer.c
@@ -62,7 +62,7 @@ EXPORT_SYMBOL(jiffies_64);
 
 /*
  * The timer wheel has LVL_DEPTH array levels. Each level provides an array of
- * LVL_SIZE buckets. Each level is driven by its own clock and therefor each
+ * LVL_SIZE buckets. Each level is driven by its own clock and therefore each
  * level has a different granularity.
  *
  * The level granularity is:		LVL_CLK_DIV ^ lvl
@@ -70,7 +70,7 @@ EXPORT_SYMBOL(jiffies_64);
  *
  * The array level of a newly armed timer depends on the relative expiry
  * time. The farther the expiry time is away the higher the array level and
- * therefor the granularity becomes.
+ * therefore the granularity becomes.
  *
  * Contrary to the original timer wheel implementation, which aims for 'exact'
  * expiry of the timers, this implementation removes the need for recascading
-- 
2.25.1



_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec