All of lore.kernel.org
 help / color / mirror / Atom feed
From: James Smart <jsmart2021@gmail.com>
To: linux-scsi@vger.kernel.org
Cc: James Smart <jsmart2021@gmail.com>,
	Ram Vegesna <ram.vegesna@broadcom.com>,
	Hannes Reinecke <hare@suse.de>, Daniel Wagner <dwagner@suse.de>
Subject: [PATCH v9 26/31] elx: efct: Hardware IO submission routines
Date: Tue,  1 Jun 2021 16:55:07 -0700	[thread overview]
Message-ID: <20210601235512.20104-27-jsmart2021@gmail.com> (raw)
In-Reply-To: <20210601235512.20104-1-jsmart2021@gmail.com>

This patch continues the efct driver population.

This patch adds driver definitions for:
Routines that write IO to Work queue, send SRRs and raw frames.

Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>

---
v9:
Non-functional changes:
  Remove EFC_SUCCESS/EFC_FAIL defines and use 0 and -Exxx errno values.
  Remove EFCT_xxx/EFCT_HW_RTN_xxx defines and use appropriate -Exxx errno
       values.
  Correct indentation on line continuations.
---
 drivers/scsi/elx/efct/efct_hw.c | 511 ++++++++++++++++++++++++++++++++
 drivers/scsi/elx/efct/efct_hw.h |  14 +
 2 files changed, 525 insertions(+)

diff --git a/drivers/scsi/elx/efct/efct_hw.c b/drivers/scsi/elx/efct/efct_hw.c
index f195bb9c9cbf..ffe7dd106811 100644
--- a/drivers/scsi/elx/efct/efct_hw.c
+++ b/drivers/scsi/elx/efct/efct_hw.c
@@ -2491,3 +2491,514 @@ efct_hw_flush(struct efct_hw *hw)
 
 	return 0;
 }
+
+int
+efct_hw_wq_write(struct hw_wq *wq, struct efct_hw_wqe *wqe)
+{
+	int rc = 0;
+	unsigned long flags = 0;
+
+	spin_lock_irqsave(&wq->queue->lock, flags);
+	if (list_empty(&wq->pending_list)) {
+		if (wq->free_count > 0) {
+			rc = _efct_hw_wq_write(wq, wqe);
+		} else {
+			INIT_LIST_HEAD(&wqe->list_entry);
+			list_add_tail(&wqe->list_entry, &wq->pending_list);
+			wq->wq_pending_count++;
+		}
+
+		spin_unlock_irqrestore(&wq->queue->lock, flags);
+		return rc;
+	}
+
+	INIT_LIST_HEAD(&wqe->list_entry);
+	list_add_tail(&wqe->list_entry, &wq->pending_list);
+	wq->wq_pending_count++;
+	while (wq->free_count > 0) {
+		wqe = list_first_entry(&wq->pending_list, struct efct_hw_wqe,
+				       list_entry);
+		if (!wqe)
+			break;
+
+		list_del_init(&wqe->list_entry);
+		rc = _efct_hw_wq_write(wq, wqe);
+		if (rc)
+			break;
+
+		if (wqe->abort_wqe_submit_needed) {
+			wqe->abort_wqe_submit_needed = false;
+			efct_hw_fill_abort_wqe(wq->hw, wqe);
+
+			INIT_LIST_HEAD(&wqe->list_entry);
+			list_add_tail(&wqe->list_entry, &wq->pending_list);
+			wq->wq_pending_count++;
+		}
+	}
+
+	spin_unlock_irqrestore(&wq->queue->lock, flags);
+
+	return rc;
+}
+
+int
+efct_efc_bls_send(struct efc *efc, u32 type, struct sli_bls_params *bls)
+{
+	struct efct *efct = efc->base;
+
+	return efct_hw_bls_send(efct, type, bls, NULL, NULL);
+}
+
+int
+efct_hw_bls_send(struct efct *efct, u32 type, struct sli_bls_params *bls_params,
+		 void *cb, void *arg)
+{
+	struct efct_hw *hw = &efct->hw;
+	struct efct_hw_io *hio;
+	struct sli_bls_payload bls;
+	int rc;
+
+	if (hw->state != EFCT_HW_STATE_ACTIVE) {
+		efc_log_err(hw->os,
+			    "cannot send BLS, HW state=%d\n", hw->state);
+		return -EIO;
+	}
+
+	hio = efct_hw_io_alloc(hw);
+	if (!hio) {
+		efc_log_err(hw->os, "HIO allocation failed\n");
+		return -EIO;
+	}
+
+	hio->done = cb;
+	hio->arg  = arg;
+
+	bls_params->xri = hio->indicator;
+	bls_params->tag = hio->reqtag;
+
+	if (type == FC_RCTL_BA_ACC) {
+		hio->type = EFCT_HW_BLS_ACC;
+		bls.type = SLI4_SLI_BLS_ACC;
+		memcpy(&bls.u.acc, bls_params->payload, sizeof(bls.u.acc));
+	} else {
+		hio->type = EFCT_HW_BLS_RJT;
+		bls.type = SLI4_SLI_BLS_RJT;
+		memcpy(&bls.u.rjt, bls_params->payload, sizeof(bls.u.rjt));
+	}
+
+	bls.ox_id = cpu_to_le16(bls_params->ox_id);
+	bls.rx_id = cpu_to_le16(bls_params->rx_id);
+
+	if (sli_xmit_bls_rsp64_wqe(&hw->sli, hio->wqe.wqebuf,
+				   &bls, bls_params)) {
+		efc_log_err(hw->os, "XMIT_BLS_RSP64 WQE error\n");
+		return -EIO;
+	}
+
+	hio->xbusy = true;
+
+	/*
+	 * Add IO to active io wqe list before submitting, in case the
+	 * wcqe processing preempts this thread.
+	 */
+	hio->wq->use_count++;
+	rc = efct_hw_wq_write(hio->wq, &hio->wqe);
+	if (rc >= 0) {
+		/* non-negative return is success */
+		rc = 0;
+	} else {
+		/* failed to write wqe, remove from active wqe list */
+		efc_log_err(hw->os,
+			    "sli_queue_write failed: %d\n", rc);
+		hio->xbusy = false;
+	}
+
+	return rc;
+}
+
+static int
+efct_els_ssrs_send_cb(struct efct_hw_io *hio, u32 length, int status,
+		      u32 ext_status, void *arg)
+{
+	struct efc_disc_io *io = arg;
+
+	efc_disc_io_complete(io, length, status, ext_status);
+	return 0;
+}
+
+static inline void
+efct_fill_els_params(struct efc_disc_io *io, struct sli_els_params *params)
+{
+	u8 *cmd = io->req.virt;
+
+	params->cmd = *cmd;
+	params->s_id = io->s_id;
+	params->d_id = io->d_id;
+	params->ox_id = io->iparam.els.ox_id;
+	params->rpi = io->rpi;
+	params->vpi = io->vpi;
+	params->rpi_registered = io->rpi_registered;
+	params->xmit_len = io->xmit_len;
+	params->rsp_len = io->rsp_len;
+	params->timeout = io->iparam.els.timeout;
+}
+
+static inline void
+efct_fill_ct_params(struct efc_disc_io *io, struct sli_ct_params *params)
+{
+	params->r_ctl = io->iparam.ct.r_ctl;
+	params->type = io->iparam.ct.type;
+	params->df_ctl =  io->iparam.ct.df_ctl;
+	params->d_id = io->d_id;
+	params->ox_id = io->iparam.ct.ox_id;
+	params->rpi = io->rpi;
+	params->vpi = io->vpi;
+	params->rpi_registered = io->rpi_registered;
+	params->xmit_len = io->xmit_len;
+	params->rsp_len = io->rsp_len;
+	params->timeout = io->iparam.ct.timeout;
+}
+
+/**
+ * efct_els_hw_srrs_send() - Send a single request and response cmd.
+ * @efc: efc library structure
+ * @io: Discovery IO used to hold els and ct cmd context.
+ *
+ * This routine supports communication sequences consisting of a single
+ * request and single response between two endpoints. Examples include:
+ *  - Sending an ELS request.
+ *  - Sending an ELS response - To send an ELS response, the caller must provide
+ * the OX_ID from the received request.
+ *  - Sending a FC Common Transport (FC-CT) request - To send a FC-CT request,
+ * the caller must provide the R_CTL, TYPE, and DF_CTL
+ * values to place in the FC frame header.
+ *
+ * Return: Status of the request.
+ */
+int
+efct_els_hw_srrs_send(struct efc *efc, struct efc_disc_io *io)
+{
+	struct efct *efct = efc->base;
+	struct efct_hw_io *hio;
+	struct efct_hw *hw = &efct->hw;
+	struct efc_dma *send = &io->req;
+	struct efc_dma *receive = &io->rsp;
+	struct sli4_sge	*sge = NULL;
+	int rc = 0;
+	u32 len = io->xmit_len;
+	u32 sge0_flags;
+	u32 sge1_flags;
+
+	hio = efct_hw_io_alloc(hw);
+	if (!hio) {
+		pr_err("HIO alloc failed\n");
+		return -EIO;
+	}
+
+	if (hw->state != EFCT_HW_STATE_ACTIVE) {
+		efc_log_debug(hw->os,
+			      "cannot send SRRS, HW state=%d\n", hw->state);
+		return -EIO;
+	}
+
+	hio->done = efct_els_ssrs_send_cb;
+	hio->arg  = io;
+
+	sge = hio->sgl->virt;
+
+	/* clear both SGE */
+	memset(hio->sgl->virt, 0, 2 * sizeof(struct sli4_sge));
+
+	sge0_flags = le32_to_cpu(sge[0].dw2_flags);
+	sge1_flags = le32_to_cpu(sge[1].dw2_flags);
+	if (send->size) {
+		sge[0].buffer_address_high =
+			cpu_to_le32(upper_32_bits(send->phys));
+		sge[0].buffer_address_low  =
+			cpu_to_le32(lower_32_bits(send->phys));
+
+		sge0_flags |= (SLI4_SGE_TYPE_DATA << SLI4_SGE_TYPE_SHIFT);
+
+		sge[0].buffer_length = cpu_to_le32(len);
+	}
+
+	if (io->io_type == EFC_DISC_IO_ELS_REQ ||
+	    io->io_type == EFC_DISC_IO_CT_REQ) {
+		sge[1].buffer_address_high =
+			cpu_to_le32(upper_32_bits(receive->phys));
+		sge[1].buffer_address_low  =
+			cpu_to_le32(lower_32_bits(receive->phys));
+
+		sge1_flags |= (SLI4_SGE_TYPE_DATA << SLI4_SGE_TYPE_SHIFT);
+		sge1_flags |= SLI4_SGE_LAST;
+
+		sge[1].buffer_length = cpu_to_le32(receive->size);
+	} else {
+		sge0_flags |= SLI4_SGE_LAST;
+	}
+
+	sge[0].dw2_flags = cpu_to_le32(sge0_flags);
+	sge[1].dw2_flags = cpu_to_le32(sge1_flags);
+
+	switch (io->io_type) {
+	case EFC_DISC_IO_ELS_REQ: {
+		struct sli_els_params els_params;
+
+		hio->type = EFCT_HW_ELS_REQ;
+		efct_fill_els_params(io, &els_params);
+		els_params.xri = hio->indicator;
+		els_params.tag = hio->reqtag;
+
+		if (sli_els_request64_wqe(&hw->sli, hio->wqe.wqebuf, hio->sgl,
+					  &els_params)) {
+			efc_log_err(hw->os, "REQ WQE error\n");
+			rc = -EIO;
+		}
+		break;
+	}
+	case EFC_DISC_IO_ELS_RESP: {
+		struct sli_els_params els_params;
+
+		hio->type = EFCT_HW_ELS_RSP;
+		efct_fill_els_params(io, &els_params);
+		els_params.xri = hio->indicator;
+		els_params.tag = hio->reqtag;
+		if (sli_xmit_els_rsp64_wqe(&hw->sli, hio->wqe.wqebuf, send,
+					   &els_params)){
+			efc_log_err(hw->os, "RSP WQE error\n");
+			rc = -EIO;
+		}
+		break;
+	}
+	case EFC_DISC_IO_CT_REQ: {
+		struct sli_ct_params ct_params;
+
+		hio->type = EFCT_HW_FC_CT;
+		efct_fill_ct_params(io, &ct_params);
+		ct_params.xri = hio->indicator;
+		ct_params.tag = hio->reqtag;
+		if (sli_gen_request64_wqe(&hw->sli, hio->wqe.wqebuf, hio->sgl,
+					  &ct_params)){
+			efc_log_err(hw->os, "GEN WQE error\n");
+			rc = -EIO;
+		}
+		break;
+	}
+	case EFC_DISC_IO_CT_RESP: {
+		struct sli_ct_params ct_params;
+
+		hio->type = EFCT_HW_FC_CT_RSP;
+		efct_fill_ct_params(io, &ct_params);
+		ct_params.xri = hio->indicator;
+		ct_params.tag = hio->reqtag;
+		if (sli_xmit_sequence64_wqe(&hw->sli, hio->wqe.wqebuf, hio->sgl,
+					    &ct_params)){
+			efc_log_err(hw->os, "XMIT SEQ WQE error\n");
+			rc = -EIO;
+		}
+		break;
+	}
+	default:
+		efc_log_err(hw->os, "bad SRRS type %#x\n", io->io_type);
+		rc = -EIO;
+	}
+
+	if (rc == 0) {
+		hio->xbusy = true;
+
+		/*
+		 * Add IO to active io wqe list before submitting, in case the
+		 * wcqe processing preempts this thread.
+		 */
+		hio->wq->use_count++;
+		rc = efct_hw_wq_write(hio->wq, &hio->wqe);
+		if (rc >= 0) {
+			/* non-negative return is success */
+			rc = 0;
+		} else {
+			/* failed to write wqe, remove from active wqe list */
+			efc_log_err(hw->os,
+				    "sli_queue_write failed: %d\n", rc);
+			hio->xbusy = false;
+		}
+	}
+
+	return rc;
+}
+
+int
+efct_hw_io_send(struct efct_hw *hw, enum efct_hw_io_type type,
+		struct efct_hw_io *io, union efct_hw_io_param_u *iparam,
+		void *cb, void *arg)
+{
+	int rc = 0;
+	bool send_wqe = true;
+
+	if (!io) {
+		pr_err("bad parm hw=%p io=%p\n", hw, io);
+		return -EIO;
+	}
+
+	if (hw->state != EFCT_HW_STATE_ACTIVE) {
+		efc_log_err(hw->os, "cannot send IO, HW state=%d\n", hw->state);
+		return -EIO;
+	}
+
+	/*
+	 * Save state needed during later stages
+	 */
+	io->type  = type;
+	io->done  = cb;
+	io->arg   = arg;
+
+	/*
+	 * Format the work queue entry used to send the IO
+	 */
+	switch (type) {
+	case EFCT_HW_IO_TARGET_WRITE: {
+		u16 *flags = &iparam->fcp_tgt.flags;
+		struct fcp_txrdy *xfer = io->xfer_rdy.virt;
+
+		/*
+		 * Fill in the XFER_RDY for IF_TYPE 0 devices
+		 */
+		xfer->ft_data_ro = cpu_to_be32(iparam->fcp_tgt.offset);
+		xfer->ft_burst_len = cpu_to_be32(iparam->fcp_tgt.xmit_len);
+
+		if (io->xbusy)
+			*flags |= SLI4_IO_CONTINUATION;
+		else
+			*flags &= ~SLI4_IO_CONTINUATION;
+		iparam->fcp_tgt.xri = io->indicator;
+		iparam->fcp_tgt.tag = io->reqtag;
+
+		if (sli_fcp_treceive64_wqe(&hw->sli, io->wqe.wqebuf,
+					   &io->def_sgl, io->first_data_sge,
+					   SLI4_CQ_DEFAULT,
+					   0, 0, &iparam->fcp_tgt)) {
+			efc_log_err(hw->os, "TRECEIVE WQE error\n");
+			rc = -EIO;
+		}
+		break;
+	}
+	case EFCT_HW_IO_TARGET_READ: {
+		u16 *flags = &iparam->fcp_tgt.flags;
+
+		if (io->xbusy)
+			*flags |= SLI4_IO_CONTINUATION;
+		else
+			*flags &= ~SLI4_IO_CONTINUATION;
+
+		iparam->fcp_tgt.xri = io->indicator;
+		iparam->fcp_tgt.tag = io->reqtag;
+
+		if (sli_fcp_tsend64_wqe(&hw->sli, io->wqe.wqebuf,
+					&io->def_sgl, io->first_data_sge,
+					SLI4_CQ_DEFAULT,
+					0, 0, &iparam->fcp_tgt)) {
+			efc_log_err(hw->os, "TSEND WQE error\n");
+			rc = -EIO;
+		}
+		break;
+	}
+	case EFCT_HW_IO_TARGET_RSP: {
+		u16 *flags = &iparam->fcp_tgt.flags;
+
+		if (io->xbusy)
+			*flags |= SLI4_IO_CONTINUATION;
+		else
+			*flags &= ~SLI4_IO_CONTINUATION;
+
+		iparam->fcp_tgt.xri = io->indicator;
+		iparam->fcp_tgt.tag = io->reqtag;
+
+		if (sli_fcp_trsp64_wqe(&hw->sli, io->wqe.wqebuf,
+				       &io->def_sgl, SLI4_CQ_DEFAULT,
+				       0, &iparam->fcp_tgt)) {
+			efc_log_err(hw->os, "TRSP WQE error\n");
+			rc = -EIO;
+		}
+
+		break;
+	}
+	default:
+		efc_log_err(hw->os, "unsupported IO type %#x\n", type);
+		rc = -EIO;
+	}
+
+	if (send_wqe && rc == 0) {
+		io->xbusy = true;
+
+		/*
+		 * Add IO to active io wqe list before submitting, in case the
+		 * wcqe processing preempts this thread.
+		 */
+		hw->tcmd_wq_submit[io->wq->instance]++;
+		io->wq->use_count++;
+		rc = efct_hw_wq_write(io->wq, &io->wqe);
+		if (rc >= 0) {
+			/* non-negative return is success */
+			rc = 0;
+		} else {
+			/* failed to write wqe, remove from active wqe list */
+			efc_log_err(hw->os,
+				    "sli_queue_write failed: %d\n", rc);
+			io->xbusy = false;
+		}
+	}
+
+	return rc;
+}
+
+int
+efct_hw_send_frame(struct efct_hw *hw, struct fc_frame_header *hdr,
+		   u8 sof, u8 eof, struct efc_dma *payload,
+		   struct efct_hw_send_frame_context *ctx,
+		   void (*callback)(void *arg, u8 *cqe, int status),
+		   void *arg)
+{
+	int rc;
+	struct efct_hw_wqe *wqe;
+	u32 xri;
+	struct hw_wq *wq;
+
+	wqe = &ctx->wqe;
+
+	/* populate the callback object */
+	ctx->hw = hw;
+
+	/* Fetch and populate request tag */
+	ctx->wqcb = efct_hw_reqtag_alloc(hw, callback, arg);
+	if (!ctx->wqcb) {
+		efc_log_err(hw->os, "can't allocate request tag\n");
+		return -ENOSPC;
+	}
+
+	wq = hw->hw_wq[0];
+
+	/* Set XRI and RX_ID in the header based on which WQ, and which
+	 * send_frame_io we are using
+	 */
+	xri = wq->send_frame_io->indicator;
+
+	/* Build the send frame WQE */
+	rc = sli_send_frame_wqe(&hw->sli, wqe->wqebuf,
+				sof, eof, (u32 *)hdr, payload, payload->len,
+				EFCT_HW_SEND_FRAME_TIMEOUT, xri,
+				ctx->wqcb->instance_index);
+	if (rc) {
+		efc_log_err(hw->os, "sli_send_frame_wqe failed: %d\n", rc);
+		return -EIO;
+	}
+
+	/* Write to WQ */
+	rc = efct_hw_wq_write(wq, wqe);
+	if (rc) {
+		efc_log_err(hw->os, "efct_hw_wq_write failed: %d\n", rc);
+		return -EIO;
+	}
+
+	wq->use_count++;
+
+	return 0;
+}
diff --git a/drivers/scsi/elx/efct/efct_hw.h b/drivers/scsi/elx/efct/efct_hw.h
index a2e4ea79e239..b9e7f5b4115b 100644
--- a/drivers/scsi/elx/efct/efct_hw.h
+++ b/drivers/scsi/elx/efct/efct_hw.h
@@ -690,5 +690,19 @@ int
 efct_hw_process(struct efct_hw *hw, u32 vector, u32 max_isr_time_msec);
 int
 efct_hw_queue_hash_find(struct efct_queue_hash *hash, u16 id);
+int efct_hw_wq_write(struct hw_wq *wq, struct efct_hw_wqe *wqe);
+int
+efct_hw_send_frame(struct efct_hw *hw, struct fc_frame_header *hdr,
+		   u8 sof, u8 eof, struct efc_dma *payload,
+		struct efct_hw_send_frame_context *ctx,
+		void (*callback)(void *arg, u8 *cqe, int status),
+		void *arg);
+int
+efct_els_hw_srrs_send(struct efc *efc, struct efc_disc_io *io);
+int
+efct_efc_bls_send(struct efc *efc, u32 type, struct sli_bls_params *bls);
+int
+efct_hw_bls_send(struct efct *efct, u32 type, struct sli_bls_params *bls_params,
+		 void *cb, void *arg);
 
 #endif /* __EFCT_H__ */
-- 
2.26.2


  parent reply	other threads:[~2021-06-01 23:55 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-01 23:54 [PATCH v9 00/31] [NEW] efct: Broadcom (Emulex) FC Target driver James Smart
2021-06-01 23:54 ` [PATCH v9 01/31] elx: libefc_sli: SLI-4 register offsets and field definitions James Smart
2021-06-01 23:54 ` [PATCH v9 02/31] elx: libefc_sli: SLI Descriptors and Queue entries James Smart
2021-06-01 23:54 ` [PATCH v9 03/31] elx: libefc_sli: Data structures and defines for mbox commands James Smart
2021-06-01 23:54 ` [PATCH v9 04/31] elx: libefc_sli: queue create/destroy/parse routines James Smart
2021-06-01 23:54 ` [PATCH v9 05/31] elx: libefc_sli: Populate and post different WQEs James Smart
2021-06-01 23:54 ` [PATCH v9 06/31] elx: libefc_sli: bmbx routines and SLI config commands James Smart
2021-06-01 23:54 ` [PATCH v9 07/31] elx: libefc_sli: APIs to setup SLI library James Smart
2021-06-01 23:54 ` [PATCH v9 08/31] elx: libefc: Generic state machine framework James Smart
2021-06-01 23:54 ` [PATCH v9 09/31] elx: libefc: Emulex FC discovery library APIs and definitions James Smart
2021-06-01 23:54 ` [PATCH v9 10/31] elx: libefc: FC Domain state machine interfaces James Smart
2021-06-01 23:54 ` [PATCH v9 11/31] elx: libefc: SLI and FC PORT " James Smart
2021-06-01 23:54 ` [PATCH v9 12/31] elx: libefc: Remote node " James Smart
2021-06-01 23:54 ` [PATCH v9 13/31] elx: libefc: Fabric " James Smart
2021-06-01 23:54 ` [PATCH v9 14/31] elx: libefc: FC node ELS and state handling James Smart
2021-06-01 23:54 ` [PATCH v9 15/31] elx: libefc: Extended link Service IO handling James Smart
2021-06-01 23:54 ` [PATCH v9 16/31] elx: libefc: Register discovery objects with hardware James Smart
2021-06-01 23:54 ` [PATCH v9 17/31] elx: efct: Data structures and defines for hw operations James Smart
2021-06-01 23:54 ` [PATCH v9 18/31] elx: efct: Driver initialization routines James Smart
2021-06-01 23:55 ` [PATCH v9 19/31] elx: efct: Hardware queues creation and deletion James Smart
2021-06-01 23:55 ` [PATCH v9 20/31] elx: efct: RQ buffer, memory pool allocation and deallocation APIs James Smart
2021-06-01 23:55 ` [PATCH v9 21/31] elx: efct: Hardware IO and SGL initialization James Smart
2021-06-18  0:31   ` Nathan Chancellor
2021-06-01 23:55 ` [PATCH v9 22/31] elx: efct: Hardware queues processing James Smart
2021-06-01 23:55 ` [PATCH v9 23/31] elx: efct: Unsolicited FC frame processing routines James Smart
2021-06-01 23:55 ` [PATCH v9 24/31] elx: efct: SCSI IO handling routines James Smart
2021-06-01 23:55 ` [PATCH v9 25/31] elx: efct: LIO backend interface routines James Smart
2021-06-01 23:55 ` James Smart [this message]
2021-06-01 23:55 ` [PATCH v9 27/31] elx: efct: link and host statistics James Smart
2021-06-01 23:55 ` [PATCH v9 28/31] elx: efct: xport and hardware teardown routines James Smart
2021-06-01 23:55 ` [PATCH v9 29/31] elx: efct: scsi_transport_fc host interface support James Smart
2021-06-01 23:55 ` [PATCH v9 30/31] elx: efct: Add Makefile and Kconfig for efct driver James Smart
2021-06-01 23:55 ` [PATCH v9 31/31] elx: efct: Tie into kernel Kconfig and build process James Smart
2021-06-02  7:19   ` kernel test robot
2021-06-02  7:19     ` kernel test robot
2021-06-02  7:25   ` kernel test robot
2021-06-02  7:25     ` kernel test robot
2021-06-16  3:40 ` [PATCH v9 00/31] [NEW] efct: Broadcom (Emulex) FC Target driver Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210601235512.20104-27-jsmart2021@gmail.com \
    --to=jsmart2021@gmail.com \
    --cc=dwagner@suse.de \
    --cc=hare@suse.de \
    --cc=linux-scsi@vger.kernel.org \
    --cc=ram.vegesna@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.