From: James Smart <jsmart2021@gmail.com>
To: linux-scsi@vger.kernel.org
Cc: James Smart <jsmart2021@gmail.com>,
Ram Vegesna <ram.vegesna@broadcom.com>,
Daniel Wagner <dwagner@suse.de>, Hannes Reinecke <hare@suse.de>
Subject: [PATCH v9 03/31] elx: libefc_sli: Data structures and defines for mbox commands
Date: Tue, 1 Jun 2021 16:54:44 -0700 [thread overview]
Message-ID: <20210601235512.20104-4-jsmart2021@gmail.com> (raw)
In-Reply-To: <20210601235512.20104-1-jsmart2021@gmail.com>
This patch continues the libefc_sli SLI-4 library population.
This patch adds definitions for SLI-4 mailbox commands
and responses.
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
---
v9:
Non-functional changes:
Remove EFC_SUCCESS/EFC_FAIL defines and use 0 and -Exxx errno values.
Remove EFCT_xxx/EFCT_HW_RTN_xxx defines and use appropriate -Exxx errno
values.
Correct indentation on line continuations.
---
drivers/scsi/elx/libefc_sli/sli4.h | 1637 ++++++++++++++++++++++++++++
1 file changed, 1637 insertions(+)
diff --git a/drivers/scsi/elx/libefc_sli/sli4.h b/drivers/scsi/elx/libefc_sli/sli4.h
index c4f413b37763..494cf36b45a9 100644
--- a/drivers/scsi/elx/libefc_sli/sli4.h
+++ b/drivers/scsi/elx/libefc_sli/sli4.h
@@ -1990,6 +1990,1531 @@ enum sli4_els_cmd_type {
SLI4_ELS_REQUEST64_CMD_FABRIC = 0x0d,
};
+#define SLI_PAGE_SIZE SZ_4K
+
+#define SLI4_BMBX_TIMEOUT_MSEC 30000
+#define SLI4_FW_READY_TIMEOUT_MSEC 30000
+
+#define SLI4_BMBX_DELAY_US 1000 /* 1 ms */
+#define SLI4_INIT_PORT_DELAY_US 10000 /* 10 ms */
+
+static inline u32
+sli_page_count(size_t bytes, u32 page_size)
+{
+ if (!page_size)
+ return 0;
+
+ return (bytes + (page_size - 1)) >> __ffs(page_size);
+}
+
+/*************************************************************************
+ * SLI-4 mailbox command formats and definitions
+ */
+
+struct sli4_mbox_command_header {
+ u8 resvd0;
+ u8 command;
+ __le16 status; /* Port writes to indicate success/fail */
+};
+
+enum sli4_mbx_cmd_value {
+ SLI4_MBX_CMD_CONFIG_LINK = 0x07,
+ SLI4_MBX_CMD_DUMP = 0x17,
+ SLI4_MBX_CMD_DOWN_LINK = 0x06,
+ SLI4_MBX_CMD_INIT_LINK = 0x05,
+ SLI4_MBX_CMD_INIT_VFI = 0xa3,
+ SLI4_MBX_CMD_INIT_VPI = 0xa4,
+ SLI4_MBX_CMD_POST_XRI = 0xa7,
+ SLI4_MBX_CMD_RELEASE_XRI = 0xac,
+ SLI4_MBX_CMD_READ_CONFIG = 0x0b,
+ SLI4_MBX_CMD_READ_STATUS = 0x0e,
+ SLI4_MBX_CMD_READ_NVPARMS = 0x02,
+ SLI4_MBX_CMD_READ_REV = 0x11,
+ SLI4_MBX_CMD_READ_LNK_STAT = 0x12,
+ SLI4_MBX_CMD_READ_SPARM64 = 0x8d,
+ SLI4_MBX_CMD_READ_TOPOLOGY = 0x95,
+ SLI4_MBX_CMD_REG_FCFI = 0xa0,
+ SLI4_MBX_CMD_REG_FCFI_MRQ = 0xaf,
+ SLI4_MBX_CMD_REG_RPI = 0x93,
+ SLI4_MBX_CMD_REG_RX_RQ = 0xa6,
+ SLI4_MBX_CMD_REG_VFI = 0x9f,
+ SLI4_MBX_CMD_REG_VPI = 0x96,
+ SLI4_MBX_CMD_RQST_FEATURES = 0x9d,
+ SLI4_MBX_CMD_SLI_CONFIG = 0x9b,
+ SLI4_MBX_CMD_UNREG_FCFI = 0xa2,
+ SLI4_MBX_CMD_UNREG_RPI = 0x14,
+ SLI4_MBX_CMD_UNREG_VFI = 0xa1,
+ SLI4_MBX_CMD_UNREG_VPI = 0x97,
+ SLI4_MBX_CMD_WRITE_NVPARMS = 0x03,
+ SLI4_MBX_CMD_CFG_AUTO_XFER_RDY = 0xad,
+};
+
+enum sli4_mbx_status {
+ SLI4_MBX_STATUS_SUCCESS = 0x0000,
+ SLI4_MBX_STATUS_FAILURE = 0x0001,
+ SLI4_MBX_STATUS_RPI_NOT_REG = 0x1400,
+};
+
+/* CONFIG_LINK - configure link-oriented parameters,
+ * such as default N_Port_ID address and various timers
+ */
+enum sli4_cmd_config_link_flags {
+ SLI4_CFG_LINK_BBSCN = 0xf00,
+ SLI4_CFG_LINK_CSCN = 0x1000,
+};
+
+struct sli4_cmd_config_link {
+ struct sli4_mbox_command_header hdr;
+ u8 maxbbc;
+ u8 rsvd5;
+ u8 rsvd6;
+ u8 rsvd7;
+ u8 alpa;
+ __le16 n_port_id;
+ u8 rsvd11;
+ __le32 rsvd12;
+ __le32 e_d_tov;
+ __le32 lp_tov;
+ __le32 r_a_tov;
+ __le32 r_t_tov;
+ __le32 al_tov;
+ __le32 rsvd36;
+ __le32 bbscn_dword;
+};
+
+#define SLI4_DUMP4_TYPE 0xf
+
+#define SLI4_WKI_TAG_SAT_TEM 0x1040
+
+struct sli4_cmd_dump4 {
+ struct sli4_mbox_command_header hdr;
+ __le32 type_dword;
+ __le16 wki_selection;
+ __le16 rsvd10;
+ __le32 rsvd12;
+ __le32 returned_byte_cnt;
+ __le32 resp_data[59];
+};
+
+/* INIT_LINK - initialize the link for a FC port */
+enum sli4_init_link_flags {
+ SLI4_INIT_LINK_F_LOOPBACK = 1 << 0,
+
+ SLI4_INIT_LINK_F_P2P_ONLY = 1 << 1,
+ SLI4_INIT_LINK_F_FCAL_ONLY = 2 << 1,
+ SLI4_INIT_LINK_F_FCAL_FAIL_OVER = 0 << 1,
+ SLI4_INIT_LINK_F_P2P_FAIL_OVER = 1 << 1,
+
+ SLI4_INIT_LINK_F_UNFAIR = 1 << 6,
+ SLI4_INIT_LINK_F_NO_LIRP = 1 << 7,
+ SLI4_INIT_LINK_F_LOOP_VALID_CHK = 1 << 8,
+ SLI4_INIT_LINK_F_NO_LISA = 1 << 9,
+ SLI4_INIT_LINK_F_FAIL_OVER = 1 << 10,
+ SLI4_INIT_LINK_F_FIXED_SPEED = 1 << 11,
+ SLI4_INIT_LINK_F_PICK_HI_ALPA = 1 << 15,
+
+};
+
+enum sli4_fc_link_speed {
+ SLI4_LINK_SPEED_1G = 1,
+ SLI4_LINK_SPEED_2G,
+ SLI4_LINK_SPEED_AUTO_1_2,
+ SLI4_LINK_SPEED_4G,
+ SLI4_LINK_SPEED_AUTO_4_1,
+ SLI4_LINK_SPEED_AUTO_4_2,
+ SLI4_LINK_SPEED_AUTO_4_2_1,
+ SLI4_LINK_SPEED_8G,
+ SLI4_LINK_SPEED_AUTO_8_1,
+ SLI4_LINK_SPEED_AUTO_8_2,
+ SLI4_LINK_SPEED_AUTO_8_2_1,
+ SLI4_LINK_SPEED_AUTO_8_4,
+ SLI4_LINK_SPEED_AUTO_8_4_1,
+ SLI4_LINK_SPEED_AUTO_8_4_2,
+ SLI4_LINK_SPEED_10G,
+ SLI4_LINK_SPEED_16G,
+ SLI4_LINK_SPEED_AUTO_16_8_4,
+ SLI4_LINK_SPEED_AUTO_16_8,
+ SLI4_LINK_SPEED_32G,
+ SLI4_LINK_SPEED_AUTO_32_16_8,
+ SLI4_LINK_SPEED_AUTO_32_16,
+ SLI4_LINK_SPEED_64G,
+ SLI4_LINK_SPEED_AUTO_64_32_16,
+ SLI4_LINK_SPEED_AUTO_64_32,
+ SLI4_LINK_SPEED_128G,
+ SLI4_LINK_SPEED_AUTO_128_64_32,
+ SLI4_LINK_SPEED_AUTO_128_64,
+};
+
+struct sli4_cmd_init_link {
+ struct sli4_mbox_command_header hdr;
+ __le32 sel_reset_al_pa_dword;
+ __le32 flags0;
+ __le32 link_speed_sel_code;
+};
+
+/* INIT_VFI - initialize the VFI resource */
+enum sli4_init_vfi_flags {
+ SLI4_INIT_VFI_FLAG_VP = 0x1000,
+ SLI4_INIT_VFI_FLAG_VF = 0x2000,
+ SLI4_INIT_VFI_FLAG_VT = 0x4000,
+ SLI4_INIT_VFI_FLAG_VR = 0x8000,
+
+ SLI4_INIT_VFI_VFID = 0x1fff,
+ SLI4_INIT_VFI_PRI = 0xe000,
+
+ SLI4_INIT_VFI_HOP_COUNT = 0xff000000,
+};
+
+struct sli4_cmd_init_vfi {
+ struct sli4_mbox_command_header hdr;
+ __le16 vfi;
+ __le16 flags0_word;
+ __le16 fcfi;
+ __le16 vpi;
+ __le32 vf_id_pri_dword;
+ __le32 hop_cnt_dword;
+};
+
+/* INIT_VPI - initialize the VPI resource */
+struct sli4_cmd_init_vpi {
+ struct sli4_mbox_command_header hdr;
+ __le16 vpi;
+ __le16 vfi;
+};
+
+/* POST_XRI - post XRI resources to the SLI Port */
+enum sli4_post_xri_flags {
+ SLI4_POST_XRI_COUNT = 0xfff,
+ SLI4_POST_XRI_FLAG_ENX = 0x1000,
+ SLI4_POST_XRI_FLAG_DL = 0x2000,
+ SLI4_POST_XRI_FLAG_DI = 0x4000,
+ SLI4_POST_XRI_FLAG_VAL = 0x8000,
+};
+
+struct sli4_cmd_post_xri {
+ struct sli4_mbox_command_header hdr;
+ __le16 xri_base;
+ __le16 xri_count_flags;
+};
+
+/* RELEASE_XRI - Release XRI resources from the SLI Port */
+enum sli4_release_xri_flags {
+ SLI4_RELEASE_XRI_REL_XRI_CNT = 0x1f,
+ SLI4_RELEASE_XRI_COUNT = 0x1f,
+};
+
+struct sli4_cmd_release_xri {
+ struct sli4_mbox_command_header hdr;
+ __le16 rel_xri_count_word;
+ __le16 xri_count_word;
+
+ struct {
+ __le16 xri_tag0;
+ __le16 xri_tag1;
+ } xri_tbl[62];
+};
+
+/* READ_CONFIG - read SLI port configuration parameters */
+struct sli4_cmd_read_config {
+ struct sli4_mbox_command_header hdr;
+};
+
+enum sli4_read_cfg_resp_flags {
+ SLI4_READ_CFG_RESP_RESOURCE_EXT = 0x80000000, /* DW1 */
+ SLI4_READ_CFG_RESP_TOPOLOGY = 0xff000000, /* DW2 */
+};
+
+enum sli4_read_cfg_topo {
+ SLI4_READ_CFG_TOPO_FC = 0x1, /* FC topology unknown */
+ SLI4_READ_CFG_TOPO_NON_FC_AL = 0x2, /* FC point-to-point or fabric */
+ SLI4_READ_CFG_TOPO_FC_AL = 0x3, /* FC-AL topology */
+};
+
+/* Link Module Type */
+enum sli4_read_cfg_lmt {
+ SLI4_LINK_MODULE_TYPE_1GB = 0x0004,
+ SLI4_LINK_MODULE_TYPE_2GB = 0x0008,
+ SLI4_LINK_MODULE_TYPE_4GB = 0x0040,
+ SLI4_LINK_MODULE_TYPE_8GB = 0x0080,
+ SLI4_LINK_MODULE_TYPE_16GB = 0x0200,
+ SLI4_LINK_MODULE_TYPE_32GB = 0x0400,
+ SLI4_LINK_MODULE_TYPE_64GB = 0x0800,
+ SLI4_LINK_MODULE_TYPE_128GB = 0x1000,
+};
+
+struct sli4_rsp_read_config {
+ struct sli4_mbox_command_header hdr;
+ __le32 ext_dword;
+ __le32 topology_dword;
+ __le32 resvd8;
+ __le16 e_d_tov;
+ __le16 resvd14;
+ __le32 resvd16;
+ __le16 r_a_tov;
+ __le16 resvd22;
+ __le32 resvd24;
+ __le32 resvd28;
+ __le16 lmt;
+ __le16 resvd34;
+ __le32 resvd36;
+ __le32 resvd40;
+ __le16 xri_base;
+ __le16 xri_count;
+ __le16 rpi_base;
+ __le16 rpi_count;
+ __le16 vpi_base;
+ __le16 vpi_count;
+ __le16 vfi_base;
+ __le16 vfi_count;
+ __le16 resvd60;
+ __le16 fcfi_count;
+ __le16 rq_count;
+ __le16 eq_count;
+ __le16 wq_count;
+ __le16 cq_count;
+ __le32 pad[45];
+};
+
+/* READ_NVPARMS - read SLI port configuration parameters */
+enum sli4_read_nvparms_flags {
+ SLI4_READ_NVPARAMS_HARD_ALPA = 0xff,
+ SLI4_READ_NVPARAMS_PREFERRED_D_ID = 0xffffff00,
+};
+
+struct sli4_cmd_read_nvparms {
+ struct sli4_mbox_command_header hdr;
+ __le32 resvd0;
+ __le32 resvd4;
+ __le32 resvd8;
+ __le32 resvd12;
+ u8 wwpn[8];
+ u8 wwnn[8];
+ __le32 hard_alpa_d_id;
+};
+
+/* WRITE_NVPARMS - write SLI port configuration parameters */
+struct sli4_cmd_write_nvparms {
+ struct sli4_mbox_command_header hdr;
+ __le32 resvd0;
+ __le32 resvd4;
+ __le32 resvd8;
+ __le32 resvd12;
+ u8 wwpn[8];
+ u8 wwnn[8];
+ __le32 hard_alpa_d_id;
+};
+
+/* READ_REV - read the Port revision levels */
+enum {
+ SLI4_READ_REV_FLAG_SLI_LEVEL = 0xf,
+ SLI4_READ_REV_FLAG_FCOEM = 0x10,
+ SLI4_READ_REV_FLAG_CEEV = 0x60,
+ SLI4_READ_REV_FLAG_VPD = 0x2000,
+
+ SLI4_READ_REV_AVAILABLE_LENGTH = 0xffffff,
+};
+
+struct sli4_cmd_read_rev {
+ struct sli4_mbox_command_header hdr;
+ __le16 resvd0;
+ __le16 flags0_word;
+ __le32 first_hw_rev;
+ __le32 second_hw_rev;
+ __le32 resvd12;
+ __le32 third_hw_rev;
+ u8 fc_ph_low;
+ u8 fc_ph_high;
+ u8 feature_level_low;
+ u8 feature_level_high;
+ __le32 resvd24;
+ __le32 first_fw_id;
+ u8 first_fw_name[16];
+ __le32 second_fw_id;
+ u8 second_fw_name[16];
+ __le32 rsvd18[30];
+ __le32 available_length_dword;
+ struct sli4_dmaaddr hostbuf;
+ __le32 returned_vpd_length;
+ __le32 actual_vpd_length;
+};
+
+/* READ_SPARM64 - read the Port service parameters */
+#define SLI4_READ_SPARM64_WWPN_OFFSET (4 * sizeof(u32))
+#define SLI4_READ_SPARM64_WWNN_OFFSET (6 * sizeof(u32))
+
+struct sli4_cmd_read_sparm64 {
+ struct sli4_mbox_command_header hdr;
+ __le32 resvd0;
+ __le32 resvd4;
+ struct sli4_bde bde_64;
+ __le16 vpi;
+ __le16 resvd22;
+ __le16 port_name_start;
+ __le16 port_name_len;
+ __le16 node_name_start;
+ __le16 node_name_len;
+};
+
+/* READ_TOPOLOGY - read the link event information */
+enum sli4_read_topo_e {
+ SLI4_READTOPO_ATTEN_TYPE = 0xff,
+ SLI4_READTOPO_FLAG_IL = 0x100,
+ SLI4_READTOPO_FLAG_PB_RECVD = 0x200,
+
+ SLI4_READTOPO_LINKSTATE_RECV = 0x3,
+ SLI4_READTOPO_LINKSTATE_TRANS = 0xc,
+ SLI4_READTOPO_LINKSTATE_MACHINE = 0xf0,
+ SLI4_READTOPO_LINKSTATE_SPEED = 0xff00,
+ SLI4_READTOPO_LINKSTATE_TF = 0x40000000,
+ SLI4_READTOPO_LINKSTATE_LU = 0x80000000,
+
+ SLI4_READTOPO_SCN_BBSCN = 0xf,
+ SLI4_READTOPO_SCN_CBBSCN = 0xf0,
+
+ SLI4_READTOPO_R_T_TOV = 0x1ff,
+ SLI4_READTOPO_AL_TOV = 0xf000,
+
+ SLI4_READTOPO_PB_FLAG = 0x80,
+
+ SLI4_READTOPO_INIT_N_PORTID = 0xffffff,
+};
+
+#define SLI4_MIN_LOOP_MAP_BYTES 128
+
+struct sli4_cmd_read_topology {
+ struct sli4_mbox_command_header hdr;
+ __le32 event_tag;
+ __le32 dw2_attentype;
+ u8 topology;
+ u8 lip_type;
+ u8 lip_al_ps;
+ u8 al_pa_granted;
+ struct sli4_bde bde_loop_map;
+ __le32 linkdown_state;
+ __le32 currlink_state;
+ u8 max_bbc;
+ u8 init_bbc;
+ u8 scn_flags;
+ u8 rsvd39;
+ __le16 dw10w0_al_rt_tov;
+ __le16 lp_tov;
+ u8 acquired_al_pa;
+ u8 pb_flags;
+ __le16 specified_al_pa;
+ __le32 dw12_init_n_port_id;
+};
+
+enum sli4_read_topo_link {
+ SLI4_READ_TOPOLOGY_LINK_UP = 0x1,
+ SLI4_READ_TOPOLOGY_LINK_DOWN,
+ SLI4_READ_TOPOLOGY_LINK_NO_ALPA,
+};
+
+enum sli4_read_topo {
+ SLI4_READ_TOPO_UNKNOWN = 0x0,
+ SLI4_READ_TOPO_NON_FC_AL,
+ SLI4_READ_TOPO_FC_AL,
+};
+
+enum sli4_read_topo_speed {
+ SLI4_READ_TOPOLOGY_SPEED_NONE = 0x00,
+ SLI4_READ_TOPOLOGY_SPEED_1G = 0x04,
+ SLI4_READ_TOPOLOGY_SPEED_2G = 0x08,
+ SLI4_READ_TOPOLOGY_SPEED_4G = 0x10,
+ SLI4_READ_TOPOLOGY_SPEED_8G = 0x20,
+ SLI4_READ_TOPOLOGY_SPEED_10G = 0x40,
+ SLI4_READ_TOPOLOGY_SPEED_16G = 0x80,
+ SLI4_READ_TOPOLOGY_SPEED_32G = 0x90,
+ SLI4_READ_TOPOLOGY_SPEED_64G = 0xa0,
+ SLI4_READ_TOPOLOGY_SPEED_128G = 0xb0,
+};
+
+/* REG_FCFI - activate a FC Forwarder */
+struct sli4_cmd_reg_fcfi_rq_cfg {
+ u8 r_ctl_mask;
+ u8 r_ctl_match;
+ u8 type_mask;
+ u8 type_match;
+};
+
+enum sli4_regfcfi_tag {
+ SLI4_REGFCFI_VLAN_TAG = 0xfff,
+ SLI4_REGFCFI_VLANTAG_VALID = 0x1000,
+};
+
+#define SLI4_CMD_REG_FCFI_NUM_RQ_CFG 4
+struct sli4_cmd_reg_fcfi {
+ struct sli4_mbox_command_header hdr;
+ __le16 fcf_index;
+ __le16 fcfi;
+ __le16 rqid1;
+ __le16 rqid0;
+ __le16 rqid3;
+ __le16 rqid2;
+ struct sli4_cmd_reg_fcfi_rq_cfg
+ rq_cfg[SLI4_CMD_REG_FCFI_NUM_RQ_CFG];
+ __le32 dw8_vlan;
+};
+
+#define SLI4_CMD_REG_FCFI_MRQ_NUM_RQ_CFG 4
+#define SLI4_CMD_REG_FCFI_MRQ_MAX_NUM_RQ 32
+#define SLI4_CMD_REG_FCFI_SET_FCFI_MODE 0
+#define SLI4_CMD_REG_FCFI_SET_MRQ_MODE 1
+
+enum sli4_reg_fcfi_mrq {
+ SLI4_REGFCFI_MRQ_VLAN_TAG = 0xfff,
+ SLI4_REGFCFI_MRQ_VLANTAG_VALID = 0x1000,
+ SLI4_REGFCFI_MRQ_MODE = 0x2000,
+
+ SLI4_REGFCFI_MRQ_MASK_NUM_PAIRS = 0xff,
+ SLI4_REGFCFI_MRQ_FILTER_BITMASK = 0xf00,
+ SLI4_REGFCFI_MRQ_RQ_SEL_POLICY = 0xf000,
+};
+
+struct sli4_cmd_reg_fcfi_mrq {
+ struct sli4_mbox_command_header hdr;
+ __le16 fcf_index;
+ __le16 fcfi;
+ __le16 rqid1;
+ __le16 rqid0;
+ __le16 rqid3;
+ __le16 rqid2;
+ struct sli4_cmd_reg_fcfi_rq_cfg
+ rq_cfg[SLI4_CMD_REG_FCFI_MRQ_NUM_RQ_CFG];
+ __le32 dw8_vlan;
+ __le32 dw9_mrqflags;
+};
+
+struct sli4_cmd_rq_cfg {
+ __le16 rq_id;
+ u8 r_ctl_mask;
+ u8 r_ctl_match;
+ u8 type_mask;
+ u8 type_match;
+};
+
+/* REG_RPI - register a Remote Port Indicator */
+enum sli4_reg_rpi {
+ SLI4_REGRPI_REMOTE_N_PORTID = 0xffffff, /* DW2 */
+ SLI4_REGRPI_UPD = 0x1000000,
+ SLI4_REGRPI_ETOW = 0x8000000,
+ SLI4_REGRPI_TERP = 0x20000000,
+ SLI4_REGRPI_CI = 0x80000000,
+};
+
+struct sli4_cmd_reg_rpi {
+ struct sli4_mbox_command_header hdr;
+ __le16 rpi;
+ __le16 rsvd2;
+ __le32 dw2_rportid_flags;
+ struct sli4_bde bde_64;
+ __le16 vpi;
+ __le16 rsvd26;
+};
+
+#define SLI4_REG_RPI_BUF_LEN 0x70
+
+/* REG_VFI - register a Virtual Fabric Indicator */
+enum sli_reg_vfi {
+ SLI4_REGVFI_VP = 0x1000, /* DW1 */
+ SLI4_REGVFI_UPD = 0x2000,
+
+ SLI4_REGVFI_LOCAL_N_PORTID = 0xffffff, /* DW10 */
+};
+
+struct sli4_cmd_reg_vfi {
+ struct sli4_mbox_command_header hdr;
+ __le16 vfi;
+ __le16 dw0w1_flags;
+ __le16 fcfi;
+ __le16 vpi;
+ u8 wwpn[8];
+ struct sli4_bde sparm;
+ __le32 e_d_tov;
+ __le32 r_a_tov;
+ __le32 dw10_lportid_flags;
+};
+
+/* REG_VPI - register a Virtual Port Indicator */
+enum sli4_reg_vpi {
+ SLI4_REGVPI_LOCAL_N_PORTID = 0xffffff,
+ SLI4_REGVPI_UPD = 0x1000000,
+};
+
+struct sli4_cmd_reg_vpi {
+ struct sli4_mbox_command_header hdr;
+ __le32 rsvd0;
+ __le32 dw2_lportid_flags;
+ u8 wwpn[8];
+ __le32 rsvd12;
+ __le16 vpi;
+ __le16 vfi;
+};
+
+/* REQUEST_FEATURES - request / query SLI features */
+enum sli4_req_features_flags {
+ SLI4_REQFEAT_QRY = 0x1, /* Dw1 */
+
+ SLI4_REQFEAT_IAAB = 1 << 0, /* DW2 & DW3 */
+ SLI4_REQFEAT_NPIV = 1 << 1,
+ SLI4_REQFEAT_DIF = 1 << 2,
+ SLI4_REQFEAT_VF = 1 << 3,
+ SLI4_REQFEAT_FCPI = 1 << 4,
+ SLI4_REQFEAT_FCPT = 1 << 5,
+ SLI4_REQFEAT_FCPC = 1 << 6,
+ SLI4_REQFEAT_RSVD = 1 << 7,
+ SLI4_REQFEAT_RQD = 1 << 8,
+ SLI4_REQFEAT_IAAR = 1 << 9,
+ SLI4_REQFEAT_HLM = 1 << 10,
+ SLI4_REQFEAT_PERFH = 1 << 11,
+ SLI4_REQFEAT_RXSEQ = 1 << 12,
+ SLI4_REQFEAT_RXRI = 1 << 13,
+ SLI4_REQFEAT_DCL2 = 1 << 14,
+ SLI4_REQFEAT_RSCO = 1 << 15,
+ SLI4_REQFEAT_MRQP = 1 << 16,
+};
+
+struct sli4_cmd_request_features {
+ struct sli4_mbox_command_header hdr;
+ __le32 dw1_qry;
+ __le32 cmd;
+ __le32 resp;
+};
+
+/*
+ * SLI_CONFIG - submit a configuration command to Port
+ *
+ * Command is either embedded as part of the payload (embed) or located
+ * in a separate memory buffer (mem)
+ */
+enum sli4_sli_config {
+ SLI4_SLICONF_EMB = 0x1, /* DW1 */
+ SLI4_SLICONF_PMDCMD_SHIFT = 3,
+ SLI4_SLICONF_PMDCMD_MASK = 0xf8,
+ SLI4_SLICONF_PMDCMD_VAL_1 = 8,
+ SLI4_SLICONF_PMDCNT = 0xf8,
+
+ SLI4_SLICONF_PMD_LEN = 0x00ffffff,
+};
+
+struct sli4_cmd_sli_config {
+ struct sli4_mbox_command_header hdr;
+ __le32 dw1_flags;
+ __le32 payload_len;
+ __le32 rsvd12[3];
+ union {
+ u8 embed[58 * sizeof(u32)];
+ struct sli4_bufptr mem;
+ } payload;
+};
+
+/* READ_STATUS - read tx/rx status of a particular port */
+#define SLI4_READSTATUS_CLEAR_COUNTERS 0x1
+
+struct sli4_cmd_read_status {
+ struct sli4_mbox_command_header hdr;
+ __le32 dw1_flags;
+ __le32 rsvd4;
+ __le32 trans_kbyte_cnt;
+ __le32 recv_kbyte_cnt;
+ __le32 trans_frame_cnt;
+ __le32 recv_frame_cnt;
+ __le32 trans_seq_cnt;
+ __le32 recv_seq_cnt;
+ __le32 tot_exchanges_orig;
+ __le32 tot_exchanges_resp;
+ __le32 recv_p_bsy_cnt;
+ __le32 recv_f_bsy_cnt;
+ __le32 no_rq_buf_dropped_frames_cnt;
+ __le32 empty_rq_timeout_cnt;
+ __le32 no_xri_dropped_frames_cnt;
+ __le32 empty_xri_pool_cnt;
+};
+
+/* READ_LNK_STAT - read link status of a particular port */
+enum sli4_read_link_stats_flags {
+ SLI4_READ_LNKSTAT_REC = 1u << 0,
+ SLI4_READ_LNKSTAT_GEC = 1u << 1,
+ SLI4_READ_LNKSTAT_W02OF = 1u << 2,
+ SLI4_READ_LNKSTAT_W03OF = 1u << 3,
+ SLI4_READ_LNKSTAT_W04OF = 1u << 4,
+ SLI4_READ_LNKSTAT_W05OF = 1u << 5,
+ SLI4_READ_LNKSTAT_W06OF = 1u << 6,
+ SLI4_READ_LNKSTAT_W07OF = 1u << 7,
+ SLI4_READ_LNKSTAT_W08OF = 1u << 8,
+ SLI4_READ_LNKSTAT_W09OF = 1u << 9,
+ SLI4_READ_LNKSTAT_W10OF = 1u << 10,
+ SLI4_READ_LNKSTAT_W11OF = 1u << 11,
+ SLI4_READ_LNKSTAT_W12OF = 1u << 12,
+ SLI4_READ_LNKSTAT_W13OF = 1u << 13,
+ SLI4_READ_LNKSTAT_W14OF = 1u << 14,
+ SLI4_READ_LNKSTAT_W15OF = 1u << 15,
+ SLI4_READ_LNKSTAT_W16OF = 1u << 16,
+ SLI4_READ_LNKSTAT_W17OF = 1u << 17,
+ SLI4_READ_LNKSTAT_W18OF = 1u << 18,
+ SLI4_READ_LNKSTAT_W19OF = 1u << 19,
+ SLI4_READ_LNKSTAT_W20OF = 1u << 20,
+ SLI4_READ_LNKSTAT_W21OF = 1u << 21,
+ SLI4_READ_LNKSTAT_CLRC = 1u << 30,
+ SLI4_READ_LNKSTAT_CLOF = 1u << 31,
+};
+
+struct sli4_cmd_read_link_stats {
+ struct sli4_mbox_command_header hdr;
+ __le32 dw1_flags;
+ __le32 linkfail_errcnt;
+ __le32 losssync_errcnt;
+ __le32 losssignal_errcnt;
+ __le32 primseq_errcnt;
+ __le32 inval_txword_errcnt;
+ __le32 crc_errcnt;
+ __le32 primseq_eventtimeout_cnt;
+ __le32 elastic_bufoverrun_errcnt;
+ __le32 arbit_fc_al_timeout_cnt;
+ __le32 adv_rx_buftor_to_buf_credit;
+ __le32 curr_rx_buf_to_buf_credit;
+ __le32 adv_tx_buf_to_buf_credit;
+ __le32 curr_tx_buf_to_buf_credit;
+ __le32 rx_eofa_cnt;
+ __le32 rx_eofdti_cnt;
+ __le32 rx_eofni_cnt;
+ __le32 rx_soff_cnt;
+ __le32 rx_dropped_no_aer_cnt;
+ __le32 rx_dropped_no_avail_rpi_rescnt;
+ __le32 rx_dropped_no_avail_xri_rescnt;
+};
+
+/* Format a WQE with WQ_ID Association performance hint */
+static inline void
+sli_set_wq_id_association(void *entry, u16 q_id)
+{
+ u32 *wqe = entry;
+
+ /*
+ * Set Word 10, bit 0 to zero
+ * Set Word 10, bits 15:1 to the WQ ID
+ */
+ wqe[10] &= ~0xffff;
+ wqe[10] |= q_id << 1;
+}
+
+/* UNREG_FCFI - unregister a FCFI */
+struct sli4_cmd_unreg_fcfi {
+ struct sli4_mbox_command_header hdr;
+ __le32 rsvd0;
+ __le16 fcfi;
+ __le16 rsvd6;
+};
+
+/* UNREG_RPI - unregister one or more RPI */
+enum sli4_unreg_rpi {
+ SLI4_UNREG_RPI_DP = 0x2000,
+ SLI4_UNREG_RPI_II_SHIFT = 14,
+ SLI4_UNREG_RPI_II_MASK = 0xc000,
+ SLI4_UNREG_RPI_II_RPI = 0x0000,
+ SLI4_UNREG_RPI_II_VPI = 0x4000,
+ SLI4_UNREG_RPI_II_VFI = 0x8000,
+ SLI4_UNREG_RPI_II_FCFI = 0xc000,
+
+ SLI4_UNREG_RPI_DEST_N_PORTID_MASK = 0x00ffffff,
+};
+
+struct sli4_cmd_unreg_rpi {
+ struct sli4_mbox_command_header hdr;
+ __le16 index;
+ __le16 dw1w1_flags;
+ __le32 dw2_dest_n_portid;
+};
+
+/* UNREG_VFI - unregister one or more VFI */
+enum sli4_unreg_vfi {
+ SLI4_UNREG_VFI_II_SHIFT = 14,
+ SLI4_UNREG_VFI_II_MASK = 0xc000,
+ SLI4_UNREG_VFI_II_VFI = 0x0000,
+ SLI4_UNREG_VFI_II_FCFI = 0xc000,
+};
+
+struct sli4_cmd_unreg_vfi {
+ struct sli4_mbox_command_header hdr;
+ __le32 rsvd0;
+ __le16 index;
+ __le16 dw2_flags;
+};
+
+enum sli4_unreg_type {
+ SLI4_UNREG_TYPE_PORT,
+ SLI4_UNREG_TYPE_DOMAIN,
+ SLI4_UNREG_TYPE_FCF,
+ SLI4_UNREG_TYPE_ALL
+};
+
+/* UNREG_VPI - unregister one or more VPI */
+enum sli4_unreg_vpi {
+ SLI4_UNREG_VPI_II_SHIFT = 14,
+ SLI4_UNREG_VPI_II_MASK = 0xc000,
+ SLI4_UNREG_VPI_II_VPI = 0x0000,
+ SLI4_UNREG_VPI_II_VFI = 0x8000,
+ SLI4_UNREG_VPI_II_FCFI = 0xc000,
+};
+
+struct sli4_cmd_unreg_vpi {
+ struct sli4_mbox_command_header hdr;
+ __le32 rsvd0;
+ __le16 index;
+ __le16 dw2w0_flags;
+};
+
+/* AUTO_XFER_RDY - Configure the auto-generate XFER-RDY feature */
+struct sli4_cmd_config_auto_xfer_rdy {
+ struct sli4_mbox_command_header hdr;
+ __le32 rsvd0;
+ __le32 max_burst_len;
+};
+
+#define SLI4_CONFIG_AUTO_XFERRDY_BLKSIZE 0xffff
+
+struct sli4_cmd_config_auto_xfer_rdy_hp {
+ struct sli4_mbox_command_header hdr;
+ __le32 rsvd0;
+ __le32 max_burst_len;
+ __le32 dw3_esoc_flags;
+ __le16 block_size;
+ __le16 rsvd14;
+};
+
+/*************************************************************************
+ * SLI-4 common configuration command formats and definitions
+ */
+
+/*
+ * Subsystem values.
+ */
+enum sli4_subsystem {
+ SLI4_SUBSYSTEM_COMMON = 0x01,
+ SLI4_SUBSYSTEM_LOWLEVEL = 0x0b,
+ SLI4_SUBSYSTEM_FC = 0x0c,
+ SLI4_SUBSYSTEM_DMTF = 0x11,
+};
+
+#define SLI4_OPC_LOWLEVEL_SET_WATCHDOG 0X36
+
+/*
+ * Common opcode (OPC) values.
+ */
+enum sli4_cmn_opcode {
+ SLI4_CMN_FUNCTION_RESET = 0x3d,
+ SLI4_CMN_CREATE_CQ = 0x0c,
+ SLI4_CMN_CREATE_CQ_SET = 0x1d,
+ SLI4_CMN_DESTROY_CQ = 0x36,
+ SLI4_CMN_MODIFY_EQ_DELAY = 0x29,
+ SLI4_CMN_CREATE_EQ = 0x0d,
+ SLI4_CMN_DESTROY_EQ = 0x37,
+ SLI4_CMN_CREATE_MQ_EXT = 0x5a,
+ SLI4_CMN_DESTROY_MQ = 0x35,
+ SLI4_CMN_GET_CNTL_ATTRIBUTES = 0x20,
+ SLI4_CMN_NOP = 0x21,
+ SLI4_CMN_GET_RSC_EXTENT_INFO = 0x9a,
+ SLI4_CMN_GET_SLI4_PARAMS = 0xb5,
+ SLI4_CMN_QUERY_FW_CONFIG = 0x3a,
+ SLI4_CMN_GET_PORT_NAME = 0x4d,
+
+ SLI4_CMN_WRITE_FLASHROM = 0x07,
+ /* TRANSCEIVER Data */
+ SLI4_CMN_READ_TRANS_DATA = 0x49,
+ SLI4_CMN_GET_CNTL_ADDL_ATTRS = 0x79,
+ SLI4_CMN_GET_FUNCTION_CFG = 0xa0,
+ SLI4_CMN_GET_PROFILE_CFG = 0xa4,
+ SLI4_CMN_SET_PROFILE_CFG = 0xa5,
+ SLI4_CMN_GET_PROFILE_LIST = 0xa6,
+ SLI4_CMN_GET_ACTIVE_PROFILE = 0xa7,
+ SLI4_CMN_SET_ACTIVE_PROFILE = 0xa8,
+ SLI4_CMN_READ_OBJECT = 0xab,
+ SLI4_CMN_WRITE_OBJECT = 0xac,
+ SLI4_CMN_DELETE_OBJECT = 0xae,
+ SLI4_CMN_READ_OBJECT_LIST = 0xad,
+ SLI4_CMN_SET_DUMP_LOCATION = 0xb8,
+ SLI4_CMN_SET_FEATURES = 0xbf,
+ SLI4_CMN_GET_RECFG_LINK_INFO = 0xc9,
+ SLI4_CMN_SET_RECNG_LINK_ID = 0xca,
+};
+
+/* DMTF opcode (OPC) values */
+#define DMTF_EXEC_CLP_CMD 0x01
+
+/*
+ * COMMON_FUNCTION_RESET
+ *
+ * Resets the Port, returning it to a power-on state. This configuration
+ * command does not have a payload and should set/expect the lengths to
+ * be zero.
+ */
+struct sli4_rqst_cmn_function_reset {
+ struct sli4_rqst_hdr hdr;
+};
+
+struct sli4_rsp_cmn_function_reset {
+ struct sli4_rsp_hdr hdr;
+};
+
+/*
+ * COMMON_GET_CNTL_ATTRIBUTES
+ *
+ * Query for information about the SLI Port
+ */
+enum sli4_cntrl_attr_flags {
+ SLI4_CNTL_ATTR_PORTNUM = 0x3f,
+ SLI4_CNTL_ATTR_PORTTYPE = 0xc0,
+};
+
+struct sli4_rsp_cmn_get_cntl_attributes {
+ struct sli4_rsp_hdr hdr;
+ u8 version_str[32];
+ u8 manufacturer_name[32];
+ __le32 supported_modes;
+ u8 eprom_version_lo;
+ u8 eprom_version_hi;
+ __le16 rsvd17;
+ __le32 mbx_ds_version;
+ __le32 ep_fw_ds_version;
+ u8 ncsi_version_str[12];
+ __le32 def_extended_timeout;
+ u8 model_number[32];
+ u8 description[64];
+ u8 serial_number[32];
+ u8 ip_version_str[32];
+ u8 fw_version_str[32];
+ u8 bios_version_str[32];
+ u8 redboot_version_str[32];
+ u8 driver_version_str[32];
+ u8 fw_on_flash_version_str[32];
+ __le32 functionalities_supported;
+ __le16 max_cdb_length;
+ u8 asic_revision;
+ u8 generational_guid0;
+ __le32 generational_guid1_12[3];
+ __le16 generational_guid13_14;
+ u8 generational_guid15;
+ u8 hba_port_count;
+ __le16 default_link_down_timeout;
+ u8 iscsi_version_min_max;
+ u8 multifunctional_device;
+ u8 cache_valid;
+ u8 hba_status;
+ u8 max_domains_supported;
+ u8 port_num_type_flags;
+ __le32 firmware_post_status;
+ __le32 hba_mtu;
+ u8 iscsi_features;
+ u8 rsvd121[3];
+ __le16 pci_vendor_id;
+ __le16 pci_device_id;
+ __le16 pci_sub_vendor_id;
+ __le16 pci_sub_system_id;
+ u8 pci_bus_number;
+ u8 pci_device_number;
+ u8 pci_function_number;
+ u8 interface_type;
+ __le64 unique_identifier;
+ u8 number_of_netfilters;
+ u8 rsvd122[3];
+};
+
+/*
+ * COMMON_GET_CNTL_ATTRIBUTES
+ *
+ * This command queries the controller information from the Flash ROM.
+ */
+struct sli4_rqst_cmn_get_cntl_addl_attributes {
+ struct sli4_rqst_hdr hdr;
+};
+
+struct sli4_rsp_cmn_get_cntl_addl_attributes {
+ struct sli4_rsp_hdr hdr;
+ __le16 ipl_file_number;
+ u8 ipl_file_version;
+ u8 rsvd4;
+ u8 on_die_temperature;
+ u8 rsvd5[3];
+ __le32 driver_advanced_features_supported;
+ __le32 rsvd7[4];
+ char universal_bios_version[32];
+ char x86_bios_version[32];
+ char efi_bios_version[32];
+ char fcode_version[32];
+ char uefi_bios_version[32];
+ char uefi_nic_version[32];
+ char uefi_fcode_version[32];
+ char uefi_iscsi_version[32];
+ char iscsi_x86_bios_version[32];
+ char pxe_x86_bios_version[32];
+ u8 default_wwpn[8];
+ u8 ext_phy_version[32];
+ u8 fc_universal_bios_version[32];
+ u8 fc_x86_bios_version[32];
+ u8 fc_efi_bios_version[32];
+ u8 fc_fcode_version[32];
+ u8 ext_phy_crc_label[8];
+ u8 ipl_file_name[16];
+ u8 rsvd139[72];
+};
+
+/*
+ * COMMON_NOP
+ *
+ * This command does not do anything; it only returns
+ * the payload in the completion.
+ */
+struct sli4_rqst_cmn_nop {
+ struct sli4_rqst_hdr hdr;
+ __le32 context[2];
+};
+
+struct sli4_rsp_cmn_nop {
+ struct sli4_rsp_hdr hdr;
+ __le32 context[2];
+};
+
+struct sli4_rqst_cmn_get_resource_extent_info {
+ struct sli4_rqst_hdr hdr;
+ __le16 resource_type;
+ __le16 rsvd16;
+};
+
+enum sli4_rsc_type {
+ SLI4_RSC_TYPE_VFI = 0x20,
+ SLI4_RSC_TYPE_VPI = 0x21,
+ SLI4_RSC_TYPE_RPI = 0x22,
+ SLI4_RSC_TYPE_XRI = 0x23,
+};
+
+struct sli4_rsp_cmn_get_resource_extent_info {
+ struct sli4_rsp_hdr hdr;
+ __le16 resource_extent_count;
+ __le16 resource_extent_size;
+};
+
+#define SLI4_128BYTE_WQE_SUPPORT 0x02
+
+#define GET_Q_CNT_METHOD(m) \
+ (((m) & SLI4_PARAM_Q_CNT_MTHD_MASK) >> SLI4_PARAM_Q_CNT_MTHD_SHFT)
+#define GET_Q_CREATE_VERSION(v) \
+ (((v) & SLI4_PARAM_QV_MASK) >> SLI4_PARAM_QV_SHIFT)
+
+enum sli4_rsp_get_params_e {
+ /*GENERIC*/
+ SLI4_PARAM_Q_CNT_MTHD_SHFT = 24,
+ SLI4_PARAM_Q_CNT_MTHD_MASK = 0xf << 24,
+ SLI4_PARAM_QV_SHIFT = 14,
+ SLI4_PARAM_QV_MASK = 3 << 14,
+
+ /* DW4 */
+ SLI4_PARAM_PROTO_TYPE_MASK = 0xff,
+ /* DW5 */
+ SLI4_PARAM_FT = 1 << 0,
+ SLI4_PARAM_SLI_REV_MASK = 0xf << 4,
+ SLI4_PARAM_SLI_FAM_MASK = 0xf << 8,
+ SLI4_PARAM_IF_TYPE_MASK = 0xf << 12,
+ SLI4_PARAM_SLI_HINT1_MASK = 0xff << 16,
+ SLI4_PARAM_SLI_HINT2_MASK = 0x1f << 24,
+ /* DW6 */
+ SLI4_PARAM_EQ_PAGE_CNT_MASK = 0xf << 0,
+ SLI4_PARAM_EQE_SZS_MASK = 0xf << 8,
+ SLI4_PARAM_EQ_PAGE_SZS_MASK = 0xff << 16,
+ /* DW8 */
+ SLI4_PARAM_CQ_PAGE_CNT_MASK = 0xf << 0,
+ SLI4_PARAM_CQE_SZS_MASK = 0xf << 8,
+ SLI4_PARAM_CQ_PAGE_SZS_MASK = 0xff << 16,
+ /* DW10 */
+ SLI4_PARAM_MQ_PAGE_CNT_MASK = 0xf << 0,
+ SLI4_PARAM_MQ_PAGE_SZS_MASK = 0xff << 16,
+ /* DW12 */
+ SLI4_PARAM_WQ_PAGE_CNT_MASK = 0xf << 0,
+ SLI4_PARAM_WQE_SZS_MASK = 0xf << 8,
+ SLI4_PARAM_WQ_PAGE_SZS_MASK = 0xff << 16,
+ /* DW14 */
+ SLI4_PARAM_RQ_PAGE_CNT_MASK = 0xf << 0,
+ SLI4_PARAM_RQE_SZS_MASK = 0xf << 8,
+ SLI4_PARAM_RQ_PAGE_SZS_MASK = 0xff << 16,
+ /* DW15W1*/
+ SLI4_PARAM_RQ_DB_WINDOW_MASK = 0xf000,
+ /* DW16 */
+ SLI4_PARAM_FC = 1 << 0,
+ SLI4_PARAM_EXT = 1 << 1,
+ SLI4_PARAM_HDRR = 1 << 2,
+ SLI4_PARAM_SGLR = 1 << 3,
+ SLI4_PARAM_FBRR = 1 << 4,
+ SLI4_PARAM_AREG = 1 << 5,
+ SLI4_PARAM_TGT = 1 << 6,
+ SLI4_PARAM_TERP = 1 << 7,
+ SLI4_PARAM_ASSI = 1 << 8,
+ SLI4_PARAM_WCHN = 1 << 9,
+ SLI4_PARAM_TCCA = 1 << 10,
+ SLI4_PARAM_TRTY = 1 << 11,
+ SLI4_PARAM_TRIR = 1 << 12,
+ SLI4_PARAM_PHOFF = 1 << 13,
+ SLI4_PARAM_PHON = 1 << 14,
+ SLI4_PARAM_PHWQ = 1 << 15,
+ SLI4_PARAM_BOUND_4GA = 1 << 16,
+ SLI4_PARAM_RXC = 1 << 17,
+ SLI4_PARAM_HLM = 1 << 18,
+ SLI4_PARAM_IPR = 1 << 19,
+ SLI4_PARAM_RXRI = 1 << 20,
+ SLI4_PARAM_SGLC = 1 << 21,
+ SLI4_PARAM_TIMM = 1 << 22,
+ SLI4_PARAM_TSMM = 1 << 23,
+ SLI4_PARAM_OAS = 1 << 25,
+ SLI4_PARAM_LC = 1 << 26,
+ SLI4_PARAM_AGXF = 1 << 27,
+ SLI4_PARAM_LOOPBACK_MASK = 0xf << 28,
+ /* DW18 */
+ SLI4_PARAM_SGL_PAGE_CNT_MASK = 0xf << 0,
+ SLI4_PARAM_SGL_PAGE_SZS_MASK = 0xff << 8,
+ SLI4_PARAM_SGL_PP_ALIGN_MASK = 0xff << 16,
+};
+
+struct sli4_rqst_cmn_get_sli4_params {
+ struct sli4_rqst_hdr hdr;
+};
+
+struct sli4_rsp_cmn_get_sli4_params {
+ struct sli4_rsp_hdr hdr;
+ __le32 dw4_protocol_type;
+ __le32 dw5_sli;
+ __le32 dw6_eq_page_cnt;
+ __le16 eqe_count_mask;
+ __le16 rsvd26;
+ __le32 dw8_cq_page_cnt;
+ __le16 cqe_count_mask;
+ __le16 rsvd34;
+ __le32 dw10_mq_page_cnt;
+ __le16 mqe_count_mask;
+ __le16 rsvd42;
+ __le32 dw12_wq_page_cnt;
+ __le16 wqe_count_mask;
+ __le16 rsvd50;
+ __le32 dw14_rq_page_cnt;
+ __le16 rqe_count_mask;
+ __le16 dw15w1_rq_db_window;
+ __le32 dw16_loopback_scope;
+ __le32 sge_supported_length;
+ __le32 dw18_sgl_page_cnt;
+ __le16 min_rq_buffer_size;
+ __le16 rsvd75;
+ __le32 max_rq_buffer_size;
+ __le16 physical_xri_max;
+ __le16 physical_rpi_max;
+ __le16 physical_vpi_max;
+ __le16 physical_vfi_max;
+ __le32 rsvd88;
+ __le16 frag_num_field_offset;
+ __le16 frag_num_field_size;
+ __le16 sgl_index_field_offset;
+ __le16 sgl_index_field_size;
+ __le32 chain_sge_initial_value_lo;
+ __le32 chain_sge_initial_value_hi;
+};
+
+/*Port Types*/
+enum sli4_port_types {
+ SLI4_PORT_TYPE_ETH = 0,
+ SLI4_PORT_TYPE_FC = 1,
+};
+
+struct sli4_rqst_cmn_get_port_name {
+ struct sli4_rqst_hdr hdr;
+ u8 port_type;
+ u8 rsvd4[3];
+};
+
+struct sli4_rsp_cmn_get_port_name {
+ struct sli4_rsp_hdr hdr;
+ char port_name[4];
+};
+
+struct sli4_rqst_cmn_write_flashrom {
+ struct sli4_rqst_hdr hdr;
+ __le32 flash_rom_access_opcode;
+ __le32 flash_rom_access_operation_type;
+ __le32 data_buffer_size;
+ __le32 offset;
+ u8 data_buffer[4];
+};
+
+/*
+ * COMMON_READ_TRANSCEIVER_DATA
+ *
+ * This command reads SFF transceiver data(Format is defined
+ * by the SFF-8472 specification).
+ */
+struct sli4_rqst_cmn_read_transceiver_data {
+ struct sli4_rqst_hdr hdr;
+ __le32 page_number;
+ __le32 port;
+};
+
+struct sli4_rsp_cmn_read_transceiver_data {
+ struct sli4_rsp_hdr hdr;
+ __le32 page_number;
+ __le32 port;
+ u8 page_data[128];
+ u8 page_data_2[128];
+};
+
+#define SLI4_REQ_DESIRE_READLEN 0xffffff
+
+struct sli4_rqst_cmn_read_object {
+ struct sli4_rqst_hdr hdr;
+ __le32 desired_read_length_dword;
+ __le32 read_offset;
+ u8 object_name[104];
+ __le32 host_buffer_descriptor_count;
+ struct sli4_bde host_buffer_descriptor[0];
+};
+
+#define RSP_COM_READ_OBJ_EOF 0x80000000
+
+struct sli4_rsp_cmn_read_object {
+ struct sli4_rsp_hdr hdr;
+ __le32 actual_read_length;
+ __le32 eof_dword;
+};
+
+enum sli4_rqst_write_object_flags {
+ SLI4_RQ_DES_WRITE_LEN = 0xffffff,
+ SLI4_RQ_DES_WRITE_LEN_NOC = 0x40000000,
+ SLI4_RQ_DES_WRITE_LEN_EOF = 0x80000000,
+};
+
+struct sli4_rqst_cmn_write_object {
+ struct sli4_rqst_hdr hdr;
+ __le32 desired_write_len_dword;
+ __le32 write_offset;
+ u8 object_name[104];
+ __le32 host_buffer_descriptor_count;
+ struct sli4_bde host_buffer_descriptor[0];
+};
+
+#define RSP_CHANGE_STATUS 0xff
+
+struct sli4_rsp_cmn_write_object {
+ struct sli4_rsp_hdr hdr;
+ __le32 actual_write_length;
+ __le32 change_status_dword;
+};
+
+struct sli4_rqst_cmn_delete_object {
+ struct sli4_rqst_hdr hdr;
+ __le32 rsvd4;
+ __le32 rsvd5;
+ u8 object_name[104];
+};
+
+#define SLI4_RQ_OBJ_LIST_READ_LEN 0xffffff
+
+struct sli4_rqst_cmn_read_object_list {
+ struct sli4_rqst_hdr hdr;
+ __le32 desired_read_length_dword;
+ __le32 read_offset;
+ u8 object_name[104];
+ __le32 host_buffer_descriptor_count;
+ struct sli4_bde host_buffer_descriptor[0];
+};
+
+enum sli4_rqst_set_dump_flags {
+ SLI4_CMN_SET_DUMP_BUFFER_LEN = 0xffffff,
+ SLI4_CMN_SET_DUMP_FDB = 0x20000000,
+ SLI4_CMN_SET_DUMP_BLP = 0x40000000,
+ SLI4_CMN_SET_DUMP_QRY = 0x80000000,
+};
+
+struct sli4_rqst_cmn_set_dump_location {
+ struct sli4_rqst_hdr hdr;
+ __le32 buffer_length_dword;
+ __le32 buf_addr_low;
+ __le32 buf_addr_high;
+};
+
+struct sli4_rsp_cmn_set_dump_location {
+ struct sli4_rsp_hdr hdr;
+ __le32 buffer_length_dword;
+};
+
+enum sli4_dump_level {
+ SLI4_DUMP_LEVEL_NONE,
+ SLI4_CHIP_LEVEL_DUMP,
+ SLI4_FUNC_DESC_DUMP,
+};
+
+enum sli4_dump_state {
+ SLI4_DUMP_STATE_NONE,
+ SLI4_CHIP_DUMP_STATE_VALID,
+ SLI4_FUNC_DUMP_STATE_VALID,
+};
+
+enum sli4_dump_status {
+ SLI4_DUMP_READY_STATUS_NOT_READY,
+ SLI4_DUMP_READY_STATUS_DD_PRESENT,
+ SLI4_DUMP_READY_STATUS_FDB_PRESENT,
+ SLI4_DUMP_READY_STATUS_SKIP_DUMP,
+ SLI4_DUMP_READY_STATUS_FAILED = -1,
+};
+
+enum sli4_set_features {
+ SLI4_SET_FEATURES_DIF_SEED = 0x01,
+ SLI4_SET_FEATURES_XRI_TIMER = 0x03,
+ SLI4_SET_FEATURES_MAX_PCIE_SPEED = 0x04,
+ SLI4_SET_FEATURES_FCTL_CHECK = 0x05,
+ SLI4_SET_FEATURES_FEC = 0x06,
+ SLI4_SET_FEATURES_PCIE_RECV_DETECT = 0x07,
+ SLI4_SET_FEATURES_DIF_MEMORY_MODE = 0x08,
+ SLI4_SET_FEATURES_DISABLE_SLI_PORT_PAUSE_STATE = 0x09,
+ SLI4_SET_FEATURES_ENABLE_PCIE_OPTIONS = 0x0a,
+ SLI4_SET_FEAT_CFG_AUTO_XFER_RDY_T10PI = 0x0c,
+ SLI4_SET_FEATURES_ENABLE_MULTI_RECEIVE_QUEUE = 0x0d,
+ SLI4_SET_FEATURES_SET_FTD_XFER_HINT = 0x0f,
+ SLI4_SET_FEATURES_SLI_PORT_HEALTH_CHECK = 0x11,
+};
+
+struct sli4_rqst_cmn_set_features {
+ struct sli4_rqst_hdr hdr;
+ __le32 feature;
+ __le32 param_len;
+ __le32 params[8];
+};
+
+struct sli4_rqst_cmn_set_features_dif_seed {
+ __le16 seed;
+ __le16 rsvd16;
+};
+
+enum sli4_rqst_set_mrq_features {
+ SLI4_RQ_MULTIRQ_ISR = 0x1,
+ SLI4_RQ_MULTIRQ_AUTOGEN_XFER_RDY = 0x2,
+
+ SLI4_RQ_MULTIRQ_NUM_RQS = 0xff,
+ SLI4_RQ_MULTIRQ_RQ_SELECT = 0xf00,
+};
+
+struct sli4_rqst_cmn_set_features_multirq {
+ __le32 auto_gen_xfer_dword;
+ __le32 num_rqs_dword;
+};
+
+enum sli4_rqst_health_check_flags {
+ SLI4_RQ_HEALTH_CHECK_ENABLE = 0x1,
+ SLI4_RQ_HEALTH_CHECK_QUERY = 0x2,
+};
+
+struct sli4_rqst_cmn_set_features_health_check {
+ __le32 health_check_dword;
+};
+
+struct sli4_rqst_cmn_set_features_set_fdt_xfer_hint {
+ __le32 fdt_xfer_hint;
+};
+
+struct sli4_rqst_dmtf_exec_clp_cmd {
+ struct sli4_rqst_hdr hdr;
+ __le32 cmd_buf_length;
+ __le32 resp_buf_length;
+ __le32 cmd_buf_addr_low;
+ __le32 cmd_buf_addr_high;
+ __le32 resp_buf_addr_low;
+ __le32 resp_buf_addr_high;
+};
+
+struct sli4_rsp_dmtf_exec_clp_cmd {
+ struct sli4_rsp_hdr hdr;
+ __le32 rsvd4;
+ __le32 resp_length;
+ __le32 rsvd6;
+ __le32 rsvd7;
+ __le32 rsvd8;
+ __le32 rsvd9;
+ __le32 clp_status;
+ __le32 clp_detailed_status;
+};
+
+#define SLI4_PROTOCOL_FC 0x10
+#define SLI4_PROTOCOL_DEFAULT 0xff
+
+struct sli4_rspource_descriptor_v1 {
+ u8 descriptor_type;
+ u8 descriptor_length;
+ __le16 rsvd16;
+ __le32 type_specific[0];
+};
+
+enum sli4_pcie_desc_flags {
+ SLI4_PCIE_DESC_IMM = 0x4000,
+ SLI4_PCIE_DESC_NOSV = 0x8000,
+
+ SLI4_PCIE_DESC_PF_NO = 0x3ff0000,
+
+ SLI4_PCIE_DESC_MISSN_ROLE = 0xff,
+ SLI4_PCIE_DESC_PCHG = 0x8000000,
+ SLI4_PCIE_DESC_SCHG = 0x10000000,
+ SLI4_PCIE_DESC_XCHG = 0x20000000,
+ SLI4_PCIE_DESC_XROM = 0xc0000000
+};
+
+struct sli4_pcie_resource_descriptor_v1 {
+ u8 descriptor_type;
+ u8 descriptor_length;
+ __le16 imm_nosv_dword;
+ __le32 pf_number_dword;
+ __le32 rsvd3;
+ u8 sriov_state;
+ u8 pf_state;
+ u8 pf_type;
+ u8 rsvd4;
+ __le16 number_of_vfs;
+ __le16 rsvd5;
+ __le32 mission_roles_dword;
+ __le32 rsvd7[16];
+};
+
+struct sli4_rqst_cmn_get_function_config {
+ struct sli4_rqst_hdr hdr;
+};
+
+struct sli4_rsp_cmn_get_function_config {
+ struct sli4_rsp_hdr hdr;
+ __le32 desc_count;
+ __le32 desc[54];
+};
+
+/* Link Config Descriptor for link config functions */
+struct sli4_link_config_descriptor {
+ u8 link_config_id;
+ u8 rsvd1[3];
+ __le32 config_description[8];
+};
+
+#define MAX_LINK_DES 10
+
+struct sli4_rqst_cmn_get_reconfig_link_info {
+ struct sli4_rqst_hdr hdr;
+};
+
+struct sli4_rsp_cmn_get_reconfig_link_info {
+ struct sli4_rsp_hdr hdr;
+ u8 active_link_config_id;
+ u8 rsvd17;
+ u8 next_link_config_id;
+ u8 rsvd19;
+ __le32 link_configuration_descriptor_count;
+ struct sli4_link_config_descriptor
+ desc[MAX_LINK_DES];
+};
+
+enum sli4_set_reconfig_link_flags {
+ SLI4_SET_RECONFIG_LINKID_NEXT = 0xff,
+ SLI4_SET_RECONFIG_LINKID_FD = 1u << 31,
+};
+
+struct sli4_rqst_cmn_set_reconfig_link_id {
+ struct sli4_rqst_hdr hdr;
+ __le32 dw4_flags;
+};
+
+struct sli4_rsp_cmn_set_reconfig_link_id {
+ struct sli4_rsp_hdr hdr;
+};
+
+struct sli4_rqst_lowlevel_set_watchdog {
+ struct sli4_rqst_hdr hdr;
+ __le16 watchdog_timeout;
+ __le16 rsvd18;
+};
+
+struct sli4_rsp_lowlevel_set_watchdog {
+ struct sli4_rsp_hdr hdr;
+ __le32 rsvd;
+};
+
+/* FC opcode (OPC) values */
+enum sli4_fc_opcodes {
+ SLI4_OPC_WQ_CREATE = 0x1,
+ SLI4_OPC_WQ_DESTROY = 0x2,
+ SLI4_OPC_POST_SGL_PAGES = 0x3,
+ SLI4_OPC_RQ_CREATE = 0x5,
+ SLI4_OPC_RQ_DESTROY = 0x6,
+ SLI4_OPC_READ_FCF_TABLE = 0x8,
+ SLI4_OPC_POST_HDR_TEMPLATES = 0xb,
+ SLI4_OPC_REDISCOVER_FCF = 0x10,
+};
+
+/* Use the default CQ associated with the WQ */
+#define SLI4_CQ_DEFAULT 0xffff
+
+/*
+ * POST_SGL_PAGES
+ *
+ * Register the scatter gather list (SGL) memory and
+ * associate it with an XRI.
+ */
+struct sli4_rqst_post_sgl_pages {
+ struct sli4_rqst_hdr hdr;
+ __le16 xri_start;
+ __le16 xri_count;
+ struct {
+ __le32 page0_low;
+ __le32 page0_high;
+ __le32 page1_low;
+ __le32 page1_high;
+ } page_set[10];
+};
+
+struct sli4_rsp_post_sgl_pages {
+ struct sli4_rsp_hdr hdr;
+};
+
+struct sli4_rqst_post_hdr_templates {
+ struct sli4_rqst_hdr hdr;
+ __le16 rpi_offset;
+ __le16 page_count;
+ struct sli4_dmaaddr page_descriptor[0];
+};
+
+#define SLI4_HDR_TEMPLATE_SIZE 64
+
+enum sli4_io_flags {
+/* The XRI associated with this IO is already active */
+ SLI4_IO_CONTINUATION = 1 << 0,
+/* Automatically generate a good RSP frame */
+ SLI4_IO_AUTO_GOOD_RESPONSE = 1 << 1,
+ SLI4_IO_NO_ABORT = 1 << 2,
+/* Set the DNRX bit because no auto xref rdy buffer is posted */
+ SLI4_IO_DNRX = 1 << 3,
+};
+
+enum sli4_callback {
+ SLI4_CB_LINK,
+ SLI4_CB_MAX,
+};
+
+enum sli4_link_status {
+ SLI4_LINK_STATUS_UP,
+ SLI4_LINK_STATUS_DOWN,
+ SLI4_LINK_STATUS_NO_ALPA,
+ SLI4_LINK_STATUS_MAX,
+};
+
+enum sli4_link_topology {
+ SLI4_LINK_TOPO_NON_FC_AL = 1,
+ SLI4_LINK_TOPO_FC_AL,
+ SLI4_LINK_TOPO_LOOPBACK_INTERNAL,
+ SLI4_LINK_TOPO_LOOPBACK_EXTERNAL,
+ SLI4_LINK_TOPO_NONE,
+ SLI4_LINK_TOPO_MAX,
+};
+
+enum sli4_link_medium {
+ SLI4_LINK_MEDIUM_ETHERNET,
+ SLI4_LINK_MEDIUM_FC,
+ SLI4_LINK_MEDIUM_MAX,
+};
/******Driver specific structures******/
struct sli4_queue {
@@ -2081,4 +3606,116 @@ struct sli_fcp_tgt_params {
u16 tag;
};
+struct sli4_link_event {
+ enum sli4_link_status status;
+ enum sli4_link_topology topology;
+ enum sli4_link_medium medium;
+ u32 speed;
+ u8 *loop_map;
+ u32 fc_id;
+};
+
+enum sli4_resource {
+ SLI4_RSRC_VFI,
+ SLI4_RSRC_VPI,
+ SLI4_RSRC_RPI,
+ SLI4_RSRC_XRI,
+ SLI4_RSRC_FCFI,
+ SLI4_RSRC_MAX,
+};
+
+struct sli4_extent {
+ u32 number;
+ u32 size;
+ u32 n_alloc;
+ u32 *base;
+ unsigned long *use_map;
+ u32 map_size;
+};
+
+struct sli4_queue_info {
+ u16 max_qcount[SLI4_QTYPE_MAX];
+ u32 max_qentries[SLI4_QTYPE_MAX];
+ u16 count_mask[SLI4_QTYPE_MAX];
+ u16 count_method[SLI4_QTYPE_MAX];
+ u32 qpage_count[SLI4_QTYPE_MAX];
+};
+
+struct sli4_params {
+ u8 has_extents;
+ u8 auto_reg;
+ u8 auto_xfer_rdy;
+ u8 hdr_template_req;
+ u8 perf_hint;
+ u8 perf_wq_id_association;
+ u8 cq_create_version;
+ u8 mq_create_version;
+ u8 high_login_mode;
+ u8 sgl_pre_registered;
+ u8 sgl_pre_reg_required;
+ u8 t10_dif_inline_capable;
+ u8 t10_dif_separate_capable;
+};
+
+struct sli4 {
+ void *os;
+ struct pci_dev *pci;
+ void __iomem *reg[PCI_STD_NUM_BARS];
+
+ u32 sli_rev;
+ u32 sli_family;
+ u32 if_type;
+
+ u16 asic_type;
+ u16 asic_rev;
+
+ u16 e_d_tov;
+ u16 r_a_tov;
+ struct sli4_queue_info qinfo;
+ u16 link_module_type;
+ u8 rq_batch;
+ u8 port_number;
+ char port_name[2];
+ u16 rq_min_buf_size;
+ u32 rq_max_buf_size;
+ u8 topology;
+ u8 wwpn[8];
+ u8 wwnn[8];
+ u32 fw_rev[2];
+ u8 fw_name[2][16];
+ char ipl_name[16];
+ u32 hw_rev[3];
+ char modeldesc[64];
+ char bios_version_string[32];
+ u32 wqe_size;
+ u32 vpd_length;
+ /*
+ * Tracks the port resources using extents metaphor. For
+ * devices that don't implement extents (i.e.
+ * has_extents == FALSE), the code models each resource as
+ * a single large extent.
+ */
+ struct sli4_extent ext[SLI4_RSRC_MAX];
+ u32 features;
+ struct sli4_params params;
+ u32 sge_supported_length;
+ u32 sgl_page_sizes;
+ u32 max_sgl_pages;
+
+ /*
+ * Callback functions
+ */
+ int (*link)(void *ctx, void *event);
+ void *link_arg;
+
+ struct efc_dma bmbx;
+
+ /* Save pointer to physical memory descriptor for non-embedded
+ * SLI_CONFIG commands for BMBX dumping purposes
+ */
+ struct efc_dma *bmbx_non_emb_pmd;
+
+ struct efc_dma vpd_data;
+};
+
#endif /* !_SLI4_H */
--
2.26.2
next prev parent reply other threads:[~2021-06-01 23:55 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-01 23:54 [PATCH v9 00/31] [NEW] efct: Broadcom (Emulex) FC Target driver James Smart
2021-06-01 23:54 ` [PATCH v9 01/31] elx: libefc_sli: SLI-4 register offsets and field definitions James Smart
2021-06-01 23:54 ` [PATCH v9 02/31] elx: libefc_sli: SLI Descriptors and Queue entries James Smart
2021-06-01 23:54 ` James Smart [this message]
2021-06-01 23:54 ` [PATCH v9 04/31] elx: libefc_sli: queue create/destroy/parse routines James Smart
2021-06-01 23:54 ` [PATCH v9 05/31] elx: libefc_sli: Populate and post different WQEs James Smart
2021-06-01 23:54 ` [PATCH v9 06/31] elx: libefc_sli: bmbx routines and SLI config commands James Smart
2021-06-01 23:54 ` [PATCH v9 07/31] elx: libefc_sli: APIs to setup SLI library James Smart
2021-06-01 23:54 ` [PATCH v9 08/31] elx: libefc: Generic state machine framework James Smart
2021-06-01 23:54 ` [PATCH v9 09/31] elx: libefc: Emulex FC discovery library APIs and definitions James Smart
2021-06-01 23:54 ` [PATCH v9 10/31] elx: libefc: FC Domain state machine interfaces James Smart
2021-06-01 23:54 ` [PATCH v9 11/31] elx: libefc: SLI and FC PORT " James Smart
2021-06-01 23:54 ` [PATCH v9 12/31] elx: libefc: Remote node " James Smart
2021-06-01 23:54 ` [PATCH v9 13/31] elx: libefc: Fabric " James Smart
2021-06-01 23:54 ` [PATCH v9 14/31] elx: libefc: FC node ELS and state handling James Smart
2021-06-01 23:54 ` [PATCH v9 15/31] elx: libefc: Extended link Service IO handling James Smart
2021-06-01 23:54 ` [PATCH v9 16/31] elx: libefc: Register discovery objects with hardware James Smart
2021-06-01 23:54 ` [PATCH v9 17/31] elx: efct: Data structures and defines for hw operations James Smart
2021-06-01 23:54 ` [PATCH v9 18/31] elx: efct: Driver initialization routines James Smart
2021-06-01 23:55 ` [PATCH v9 19/31] elx: efct: Hardware queues creation and deletion James Smart
2021-06-01 23:55 ` [PATCH v9 20/31] elx: efct: RQ buffer, memory pool allocation and deallocation APIs James Smart
2021-06-01 23:55 ` [PATCH v9 21/31] elx: efct: Hardware IO and SGL initialization James Smart
2021-06-18 0:31 ` Nathan Chancellor
2021-06-01 23:55 ` [PATCH v9 22/31] elx: efct: Hardware queues processing James Smart
2021-06-01 23:55 ` [PATCH v9 23/31] elx: efct: Unsolicited FC frame processing routines James Smart
2021-06-01 23:55 ` [PATCH v9 24/31] elx: efct: SCSI IO handling routines James Smart
2021-06-01 23:55 ` [PATCH v9 25/31] elx: efct: LIO backend interface routines James Smart
2021-06-01 23:55 ` [PATCH v9 26/31] elx: efct: Hardware IO submission routines James Smart
2021-06-01 23:55 ` [PATCH v9 27/31] elx: efct: link and host statistics James Smart
2021-06-01 23:55 ` [PATCH v9 28/31] elx: efct: xport and hardware teardown routines James Smart
2021-06-01 23:55 ` [PATCH v9 29/31] elx: efct: scsi_transport_fc host interface support James Smart
2021-06-01 23:55 ` [PATCH v9 30/31] elx: efct: Add Makefile and Kconfig for efct driver James Smart
2021-06-01 23:55 ` [PATCH v9 31/31] elx: efct: Tie into kernel Kconfig and build process James Smart
2021-06-02 7:19 ` kernel test robot
2021-06-02 7:19 ` kernel test robot
2021-06-02 7:25 ` kernel test robot
2021-06-02 7:25 ` kernel test robot
2021-06-16 3:40 ` [PATCH v9 00/31] [NEW] efct: Broadcom (Emulex) FC Target driver Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210601235512.20104-4-jsmart2021@gmail.com \
--to=jsmart2021@gmail.com \
--cc=dwagner@suse.de \
--cc=hare@suse.de \
--cc=linux-scsi@vger.kernel.org \
--cc=ram.vegesna@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.