* [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
@ 2021-05-27 10:25 ` Jamin Lin
0 siblings, 0 replies; 18+ messages in thread
From: Jamin Lin @ 2021-05-27 10:25 UTC (permalink / raw)
To: Rob Herring, Joel Stanley, Andrew Jeffery, Brendan Higgins,
Benjamin Herrenschmidt, Rayn Chen,
open list:I2C SUBSYSTEM HOST DRIVERS,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM/ASPEED MACHINE SUPPORT,
moderated list:ARM/ASPEED MACHINE SUPPORT, open list,
moderated list:ARM/ASPEED I2C DRIVER
Cc: ryan_chen, chin-ting_kuo, troy_lee, steven_lee
Convert aspeed i2c to yaml.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
.../devicetree/bindings/i2c/aspeed,i2c.yaml | 86 +++++++++++++++++++
.../devicetree/bindings/i2c/i2c-aspeed.txt | 49 -----------
2 files changed, 86 insertions(+), 49 deletions(-)
create mode 100644 Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
new file mode 100644
index 000000000000..1f7064d77708
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs Device Tree Bindings
+
+maintainers:
+ - Rayn Chen <rayn_chen@aspeedtech.com>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - aspeed,ast2400-i2c-bus
+ - aspeed,ast2500-i2c-bus
+ - aspeed,ast2600-i2c-bus
+
+ "#size-cells":
+ const: 0
+
+ "#address-cells":
+ const: 1
+
+ reg:
+ minItems: 1
+ maxItems: 2
+ items:
+ - description: address offset and range of bus
+ - description: address offset and range of bus buffer
+
+ interrupts:
+ maxItems: 1
+ description: interrupt number
+
+ clocks:
+ maxItems: 1
+ description:
+ root clock of bus, should reference the APB
+ clock in the second cell
+
+ reset:
+ maxItems: 1
+ description: phandle to reset controller with the reset number in
+ the second cell
+
+ bus-frequency:
+ minimum: 500
+ maximum: 4000000
+ default: 100000
+ description: frequency of the bus clock in Hz defaults to 100 kHz when not
+ specified
+
+ multi-master:
+ type: boolean
+ description:
+ states that there is another master active on this bus
+
+required:
+ - reg
+ - compatible
+ - clocks
+ - resets
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/aspeed-clock.h>
+ i2c0: i2c-bus@40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x40 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
+ bus-frequency = <100000>;
+ interrupts = <0>;
+ interrupt-parent = <&i2c_ic>;
+ status = "disabled";
+ /* Does not need pinctrl properties */
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
deleted file mode 100644
index b47f6ccb196a..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Device tree configuration for the I2C busses on the AST24XX, AST25XX, and AST26XX SoCs.
-
-Required Properties:
-- #address-cells : should be 1
-- #size-cells : should be 0
-- reg : address offset and range of bus
-- compatible : should be "aspeed,ast2400-i2c-bus"
- or "aspeed,ast2500-i2c-bus"
- or "aspeed,ast2600-i2c-bus"
-- clocks : root clock of bus, should reference the APB
- clock in the second cell
-- resets : phandle to reset controller with the reset number in
- the second cell
-- interrupts : interrupt number
-
-Optional Properties:
-- bus-frequency : frequency of the bus clock in Hz defaults to 100 kHz when not
- specified
-- multi-master : states that there is another master active on this bus.
-
-Example:
-
-i2c {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x1e78a000 0x1000>;
-
- i2c_ic: interrupt-controller@0 {
- #interrupt-cells = <1>;
- compatible = "aspeed,ast2400-i2c-ic";
- reg = <0x0 0x40>;
- interrupts = <12>;
- interrupt-controller;
- };
-
- i2c0: i2c-bus@40 {
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0x40 0x40>;
- compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&syscon ASPEED_CLK_APB>;
- resets = <&syscon ASPEED_RESET_I2C>;
- bus-frequency = <100000>;
- interrupts = <0>;
- interrupt-parent = <&i2c_ic>;
- };
-};
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
@ 2021-05-27 10:25 ` Jamin Lin
0 siblings, 0 replies; 18+ messages in thread
From: Jamin Lin @ 2021-05-27 10:25 UTC (permalink / raw)
To: Rob Herring, Joel Stanley, Andrew Jeffery, Brendan Higgins,
Benjamin Herrenschmidt, Rayn Chen,
open list:I2C SUBSYSTEM HOST DRIVERS,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM/ASPEED MACHINE SUPPORT,
moderated list:ARM/ASPEED MACHINE SUPPORT, open list,
moderated list:ARM/ASPEED I2C DRIVER
Cc: steven_lee, chin-ting_kuo, troy_lee, ryan_chen
Convert aspeed i2c to yaml.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
.../devicetree/bindings/i2c/aspeed,i2c.yaml | 86 +++++++++++++++++++
.../devicetree/bindings/i2c/i2c-aspeed.txt | 49 -----------
2 files changed, 86 insertions(+), 49 deletions(-)
create mode 100644 Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
new file mode 100644
index 000000000000..1f7064d77708
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs Device Tree Bindings
+
+maintainers:
+ - Rayn Chen <rayn_chen@aspeedtech.com>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - aspeed,ast2400-i2c-bus
+ - aspeed,ast2500-i2c-bus
+ - aspeed,ast2600-i2c-bus
+
+ "#size-cells":
+ const: 0
+
+ "#address-cells":
+ const: 1
+
+ reg:
+ minItems: 1
+ maxItems: 2
+ items:
+ - description: address offset and range of bus
+ - description: address offset and range of bus buffer
+
+ interrupts:
+ maxItems: 1
+ description: interrupt number
+
+ clocks:
+ maxItems: 1
+ description:
+ root clock of bus, should reference the APB
+ clock in the second cell
+
+ reset:
+ maxItems: 1
+ description: phandle to reset controller with the reset number in
+ the second cell
+
+ bus-frequency:
+ minimum: 500
+ maximum: 4000000
+ default: 100000
+ description: frequency of the bus clock in Hz defaults to 100 kHz when not
+ specified
+
+ multi-master:
+ type: boolean
+ description:
+ states that there is another master active on this bus
+
+required:
+ - reg
+ - compatible
+ - clocks
+ - resets
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/aspeed-clock.h>
+ i2c0: i2c-bus@40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x40 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
+ bus-frequency = <100000>;
+ interrupts = <0>;
+ interrupt-parent = <&i2c_ic>;
+ status = "disabled";
+ /* Does not need pinctrl properties */
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
deleted file mode 100644
index b47f6ccb196a..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Device tree configuration for the I2C busses on the AST24XX, AST25XX, and AST26XX SoCs.
-
-Required Properties:
-- #address-cells : should be 1
-- #size-cells : should be 0
-- reg : address offset and range of bus
-- compatible : should be "aspeed,ast2400-i2c-bus"
- or "aspeed,ast2500-i2c-bus"
- or "aspeed,ast2600-i2c-bus"
-- clocks : root clock of bus, should reference the APB
- clock in the second cell
-- resets : phandle to reset controller with the reset number in
- the second cell
-- interrupts : interrupt number
-
-Optional Properties:
-- bus-frequency : frequency of the bus clock in Hz defaults to 100 kHz when not
- specified
-- multi-master : states that there is another master active on this bus.
-
-Example:
-
-i2c {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x1e78a000 0x1000>;
-
- i2c_ic: interrupt-controller@0 {
- #interrupt-cells = <1>;
- compatible = "aspeed,ast2400-i2c-ic";
- reg = <0x0 0x40>;
- interrupts = <12>;
- interrupt-controller;
- };
-
- i2c0: i2c-bus@40 {
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0x40 0x40>;
- compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&syscon ASPEED_CLK_APB>;
- resets = <&syscon ASPEED_RESET_I2C>;
- bus-frequency = <100000>;
- interrupts = <0>;
- interrupt-parent = <&i2c_ic>;
- };
-};
--
2.17.1
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
2021-05-27 10:25 ` Jamin Lin
(?)
@ 2021-05-27 23:20 ` Andrew Jeffery
-1 siblings, 0 replies; 18+ messages in thread
From: Andrew Jeffery @ 2021-05-27 23:20 UTC (permalink / raw)
To: Jamin Lin, Rob Herring, Joel Stanley, Brendan Higgins,
Benjamin Herrenschmidt, Rayn Chen,
open list:I2C SUBSYSTEM HOST DRIVERS,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM/ASPEED MACHINE SUPPORT,
moderated list:ARM/ASPEED MACHINE SUPPORT, open list,
moderated list:ARM/ASPEED I2C DRIVER
Cc: Ryan Chen, Chin-Ting Kuo, Troy Lee, Steven Lee
On Thu, 27 May 2021, at 19:55, Jamin Lin wrote:
> Convert aspeed i2c to yaml.
>
> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> ---
> .../devicetree/bindings/i2c/aspeed,i2c.yaml | 86 +++++++++++++++++++
> .../devicetree/bindings/i2c/i2c-aspeed.txt | 49 -----------
> 2 files changed, 86 insertions(+), 49 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
>
> diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> new file mode 100644
> index 000000000000..1f7064d77708
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> @@ -0,0 +1,86 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs Device
> Tree Bindings
> +
> +maintainers:
> + - Rayn Chen <rayn_chen@aspeedtech.com>
> +
> +allOf:
> + - $ref: /schemas/i2c/i2c-controller.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - aspeed,ast2400-i2c-bus
> + - aspeed,ast2500-i2c-bus
> + - aspeed,ast2600-i2c-bus
> +
> + "#size-cells":
> + const: 0
> +
> + "#address-cells":
> + const: 1
> +
> + reg:
> + minItems: 1
> + maxItems: 2
> + items:
> + - description: address offset and range of bus
> + - description: address offset and range of bus buffer
> +
> + interrupts:
> + maxItems: 1
> + description: interrupt number
> +
> + clocks:
> + maxItems: 1
> + description:
> + root clock of bus, should reference the APB
> + clock in the second cell
> +
> + reset:
> + maxItems: 1
> + description: phandle to reset controller with the reset number in
> + the second cell
> +
> + bus-frequency:
> + minimum: 500
> + maximum: 4000000
> + default: 100000
> + description: frequency of the bus clock in Hz defaults to 100 kHz
> when not
> + specified
> +
> + multi-master:
> + type: boolean
> + description:
> + states that there is another master active on this bus
> +
> +required:
> + - reg
> + - compatible
> + - clocks
> + - resets
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/aspeed-clock.h>
> + i2c0: i2c-bus@40 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <1>;
> + reg = <0x40 0x40>;
> + compatible = "aspeed,ast2500-i2c-bus";
> + clocks = <&syscon ASPEED_CLK_APB>;
> + resets = <&syscon ASPEED_RESET_I2C>;
> + bus-frequency = <100000>;
> + interrupts = <0>;
> + interrupt-parent = <&i2c_ic>;
> + status = "disabled";
> + /* Does not need pinctrl properties */
Note this actually isn't right and someone (me?) needs to send a patch
to fix the devicetree(s) - the I2C mux properties for bus 0 and 1 just
don't have a group, and so SCL and SDA need to be muxed individually.
I expect we wound up with this comment by a lack of a match for an
erroneous grep.
Andrew
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
@ 2021-05-27 23:20 ` Andrew Jeffery
0 siblings, 0 replies; 18+ messages in thread
From: Andrew Jeffery @ 2021-05-27 23:20 UTC (permalink / raw)
To: Jamin Lin, Rob Herring, Joel Stanley, Brendan Higgins,
Benjamin Herrenschmidt, Rayn Chen,
open list:I2C SUBSYSTEM HOST DRIVERS,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM/ASPEED MACHINE SUPPORT,
moderated list:ARM/ASPEED MACHINE SUPPORT, open list,
moderated list:ARM/ASPEED I2C DRIVER
Cc: Ryan Chen, Chin-Ting Kuo, Troy Lee, Steven Lee
On Thu, 27 May 2021, at 19:55, Jamin Lin wrote:
> Convert aspeed i2c to yaml.
>
> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> ---
> .../devicetree/bindings/i2c/aspeed,i2c.yaml | 86 +++++++++++++++++++
> .../devicetree/bindings/i2c/i2c-aspeed.txt | 49 -----------
> 2 files changed, 86 insertions(+), 49 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
>
> diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> new file mode 100644
> index 000000000000..1f7064d77708
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> @@ -0,0 +1,86 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs Device
> Tree Bindings
> +
> +maintainers:
> + - Rayn Chen <rayn_chen@aspeedtech.com>
> +
> +allOf:
> + - $ref: /schemas/i2c/i2c-controller.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - aspeed,ast2400-i2c-bus
> + - aspeed,ast2500-i2c-bus
> + - aspeed,ast2600-i2c-bus
> +
> + "#size-cells":
> + const: 0
> +
> + "#address-cells":
> + const: 1
> +
> + reg:
> + minItems: 1
> + maxItems: 2
> + items:
> + - description: address offset and range of bus
> + - description: address offset and range of bus buffer
> +
> + interrupts:
> + maxItems: 1
> + description: interrupt number
> +
> + clocks:
> + maxItems: 1
> + description:
> + root clock of bus, should reference the APB
> + clock in the second cell
> +
> + reset:
> + maxItems: 1
> + description: phandle to reset controller with the reset number in
> + the second cell
> +
> + bus-frequency:
> + minimum: 500
> + maximum: 4000000
> + default: 100000
> + description: frequency of the bus clock in Hz defaults to 100 kHz
> when not
> + specified
> +
> + multi-master:
> + type: boolean
> + description:
> + states that there is another master active on this bus
> +
> +required:
> + - reg
> + - compatible
> + - clocks
> + - resets
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/aspeed-clock.h>
> + i2c0: i2c-bus@40 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <1>;
> + reg = <0x40 0x40>;
> + compatible = "aspeed,ast2500-i2c-bus";
> + clocks = <&syscon ASPEED_CLK_APB>;
> + resets = <&syscon ASPEED_RESET_I2C>;
> + bus-frequency = <100000>;
> + interrupts = <0>;
> + interrupt-parent = <&i2c_ic>;
> + status = "disabled";
> + /* Does not need pinctrl properties */
Note this actually isn't right and someone (me?) needs to send a patch
to fix the devicetree(s) - the I2C mux properties for bus 0 and 1 just
don't have a group, and so SCL and SDA need to be muxed individually.
I expect we wound up with this comment by a lack of a match for an
erroneous grep.
Andrew
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
@ 2021-05-27 23:20 ` Andrew Jeffery
0 siblings, 0 replies; 18+ messages in thread
From: Andrew Jeffery @ 2021-05-27 23:20 UTC (permalink / raw)
To: Jamin Lin, Rob Herring, Joel Stanley, Brendan Higgins,
Benjamin Herrenschmidt, Rayn Chen,
open list:I2C SUBSYSTEM HOST DRIVERS,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM/ASPEED MACHINE SUPPORT,
moderated list:ARM/ASPEED MACHINE SUPPORT, open list,
moderated list:ARM/ASPEED I2C DRIVER
Cc: Steven Lee, Chin-Ting Kuo, Troy Lee, Ryan Chen
On Thu, 27 May 2021, at 19:55, Jamin Lin wrote:
> Convert aspeed i2c to yaml.
>
> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> ---
> .../devicetree/bindings/i2c/aspeed,i2c.yaml | 86 +++++++++++++++++++
> .../devicetree/bindings/i2c/i2c-aspeed.txt | 49 -----------
> 2 files changed, 86 insertions(+), 49 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
>
> diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> new file mode 100644
> index 000000000000..1f7064d77708
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> @@ -0,0 +1,86 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs Device
> Tree Bindings
> +
> +maintainers:
> + - Rayn Chen <rayn_chen@aspeedtech.com>
> +
> +allOf:
> + - $ref: /schemas/i2c/i2c-controller.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - aspeed,ast2400-i2c-bus
> + - aspeed,ast2500-i2c-bus
> + - aspeed,ast2600-i2c-bus
> +
> + "#size-cells":
> + const: 0
> +
> + "#address-cells":
> + const: 1
> +
> + reg:
> + minItems: 1
> + maxItems: 2
> + items:
> + - description: address offset and range of bus
> + - description: address offset and range of bus buffer
> +
> + interrupts:
> + maxItems: 1
> + description: interrupt number
> +
> + clocks:
> + maxItems: 1
> + description:
> + root clock of bus, should reference the APB
> + clock in the second cell
> +
> + reset:
> + maxItems: 1
> + description: phandle to reset controller with the reset number in
> + the second cell
> +
> + bus-frequency:
> + minimum: 500
> + maximum: 4000000
> + default: 100000
> + description: frequency of the bus clock in Hz defaults to 100 kHz
> when not
> + specified
> +
> + multi-master:
> + type: boolean
> + description:
> + states that there is another master active on this bus
> +
> +required:
> + - reg
> + - compatible
> + - clocks
> + - resets
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/aspeed-clock.h>
> + i2c0: i2c-bus@40 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <1>;
> + reg = <0x40 0x40>;
> + compatible = "aspeed,ast2500-i2c-bus";
> + clocks = <&syscon ASPEED_CLK_APB>;
> + resets = <&syscon ASPEED_RESET_I2C>;
> + bus-frequency = <100000>;
> + interrupts = <0>;
> + interrupt-parent = <&i2c_ic>;
> + status = "disabled";
> + /* Does not need pinctrl properties */
Note this actually isn't right and someone (me?) needs to send a patch
to fix the devicetree(s) - the I2C mux properties for bus 0 and 1 just
don't have a group, and so SCL and SDA need to be muxed individually.
I expect we wound up with this comment by a lack of a match for an
erroneous grep.
Andrew
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
2021-05-27 23:20 ` Andrew Jeffery
(?)
@ 2021-05-28 1:44 ` Jamin Lin
-1 siblings, 0 replies; 18+ messages in thread
From: Jamin Lin @ 2021-05-28 1:44 UTC (permalink / raw)
To: Andrew Jeffery
Cc: Rob Herring, Joel Stanley, Brendan Higgins,
Benjamin Herrenschmidt, Rayn Chen,
open list:I2C SUBSYSTEM HOST DRIVERS,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM/ASPEED MACHINE SUPPORT,
moderated list:ARM/ASPEED MACHINE SUPPORT, open list,
moderated list:ARM/ASPEED I2C DRIVER, Ryan Chen, Chin-Ting Kuo,
Troy Lee, Steven Lee
The 05/27/2021 23:20, Andrew Jeffery wrote:
>
>
> On Thu, 27 May 2021, at 19:55, Jamin Lin wrote:
> > Convert aspeed i2c to yaml.
> >
> > Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> > ---
> > .../devicetree/bindings/i2c/aspeed,i2c.yaml | 86 +++++++++++++++++++
> > .../devicetree/bindings/i2c/i2c-aspeed.txt | 49 -----------
> > 2 files changed, 86 insertions(+), 49 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
> >
> > diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > new file mode 100644
> > index 000000000000..1f7064d77708
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > @@ -0,0 +1,86 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs Device
> > Tree Bindings
> > +
> > +maintainers:
> > + - Rayn Chen <rayn_chen@aspeedtech.com>
> > +
> > +allOf:
> > + - $ref: /schemas/i2c/i2c-controller.yaml#
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - aspeed,ast2400-i2c-bus
> > + - aspeed,ast2500-i2c-bus
> > + - aspeed,ast2600-i2c-bus
> > +
> > + "#size-cells":
> > + const: 0
> > +
> > + "#address-cells":
> > + const: 1
> > +
> > + reg:
> > + minItems: 1
> > + maxItems: 2
> > + items:
> > + - description: address offset and range of bus
> > + - description: address offset and range of bus buffer
> > +
> > + interrupts:
> > + maxItems: 1
> > + description: interrupt number
> > +
> > + clocks:
> > + maxItems: 1
> > + description:
> > + root clock of bus, should reference the APB
> > + clock in the second cell
> > +
> > + reset:
> > + maxItems: 1
> > + description: phandle to reset controller with the reset number in
> > + the second cell
> > +
> > + bus-frequency:
> > + minimum: 500
> > + maximum: 4000000
> > + default: 100000
> > + description: frequency of the bus clock in Hz defaults to 100 kHz
> > when not
> > + specified
> > +
> > + multi-master:
> > + type: boolean
> > + description:
> > + states that there is another master active on this bus
> > +
> > +required:
> > + - reg
> > + - compatible
> > + - clocks
> > + - resets
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/clock/aspeed-clock.h>
> > + i2c0: i2c-bus@40 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + #interrupt-cells = <1>;
> > + reg = <0x40 0x40>;
> > + compatible = "aspeed,ast2500-i2c-bus";
> > + clocks = <&syscon ASPEED_CLK_APB>;
> > + resets = <&syscon ASPEED_RESET_I2C>;
> > + bus-frequency = <100000>;
> > + interrupts = <0>;
> > + interrupt-parent = <&i2c_ic>;
> > + status = "disabled";
> > + /* Does not need pinctrl properties */
>
> Note this actually isn't right and someone (me?) needs to send a patch
> to fix the devicetree(s) - the I2C mux properties for bus 0 and 1 just
> don't have a group, and so SCL and SDA need to be muxed individually.
>
> I expect we wound up with this comment by a lack of a match for an
> erroneous grep.
>
> Andrew
Understand. Can I change the example as the following or can you give me
any suggestion?
i2c0: i2c-bus@40 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x40 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <0>;
interrupt-parent = <&i2c_ic>;
Thanks-Jamin
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
@ 2021-05-28 1:44 ` Jamin Lin
0 siblings, 0 replies; 18+ messages in thread
From: Jamin Lin @ 2021-05-28 1:44 UTC (permalink / raw)
To: Andrew Jeffery
Cc: Rob Herring, Joel Stanley, Brendan Higgins,
Benjamin Herrenschmidt, Rayn Chen,
open list:I2C SUBSYSTEM HOST DRIVERS,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM/ASPEED MACHINE SUPPORT,
moderated list:ARM/ASPEED MACHINE SUPPORT, open list,
moderated list:ARM/ASPEED I2C DRIVER, Ryan Chen, Chin-Ting Kuo,
Troy Lee, Steven Lee
The 05/27/2021 23:20, Andrew Jeffery wrote:
>
>
> On Thu, 27 May 2021, at 19:55, Jamin Lin wrote:
> > Convert aspeed i2c to yaml.
> >
> > Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> > ---
> > .../devicetree/bindings/i2c/aspeed,i2c.yaml | 86 +++++++++++++++++++
> > .../devicetree/bindings/i2c/i2c-aspeed.txt | 49 -----------
> > 2 files changed, 86 insertions(+), 49 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
> >
> > diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > new file mode 100644
> > index 000000000000..1f7064d77708
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > @@ -0,0 +1,86 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs Device
> > Tree Bindings
> > +
> > +maintainers:
> > + - Rayn Chen <rayn_chen@aspeedtech.com>
> > +
> > +allOf:
> > + - $ref: /schemas/i2c/i2c-controller.yaml#
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - aspeed,ast2400-i2c-bus
> > + - aspeed,ast2500-i2c-bus
> > + - aspeed,ast2600-i2c-bus
> > +
> > + "#size-cells":
> > + const: 0
> > +
> > + "#address-cells":
> > + const: 1
> > +
> > + reg:
> > + minItems: 1
> > + maxItems: 2
> > + items:
> > + - description: address offset and range of bus
> > + - description: address offset and range of bus buffer
> > +
> > + interrupts:
> > + maxItems: 1
> > + description: interrupt number
> > +
> > + clocks:
> > + maxItems: 1
> > + description:
> > + root clock of bus, should reference the APB
> > + clock in the second cell
> > +
> > + reset:
> > + maxItems: 1
> > + description: phandle to reset controller with the reset number in
> > + the second cell
> > +
> > + bus-frequency:
> > + minimum: 500
> > + maximum: 4000000
> > + default: 100000
> > + description: frequency of the bus clock in Hz defaults to 100 kHz
> > when not
> > + specified
> > +
> > + multi-master:
> > + type: boolean
> > + description:
> > + states that there is another master active on this bus
> > +
> > +required:
> > + - reg
> > + - compatible
> > + - clocks
> > + - resets
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/clock/aspeed-clock.h>
> > + i2c0: i2c-bus@40 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + #interrupt-cells = <1>;
> > + reg = <0x40 0x40>;
> > + compatible = "aspeed,ast2500-i2c-bus";
> > + clocks = <&syscon ASPEED_CLK_APB>;
> > + resets = <&syscon ASPEED_RESET_I2C>;
> > + bus-frequency = <100000>;
> > + interrupts = <0>;
> > + interrupt-parent = <&i2c_ic>;
> > + status = "disabled";
> > + /* Does not need pinctrl properties */
>
> Note this actually isn't right and someone (me?) needs to send a patch
> to fix the devicetree(s) - the I2C mux properties for bus 0 and 1 just
> don't have a group, and so SCL and SDA need to be muxed individually.
>
> I expect we wound up with this comment by a lack of a match for an
> erroneous grep.
>
> Andrew
Understand. Can I change the example as the following or can you give me
any suggestion?
i2c0: i2c-bus@40 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x40 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <0>;
interrupt-parent = <&i2c_ic>;
Thanks-Jamin
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
@ 2021-05-28 1:44 ` Jamin Lin
0 siblings, 0 replies; 18+ messages in thread
From: Jamin Lin @ 2021-05-28 1:44 UTC (permalink / raw)
To: Andrew Jeffery
Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Ryan Chen, moderated list:ARM/ASPEED MACHINE SUPPORT,
moderated list:ARM/ASPEED I2C DRIVER, Troy Lee, Brendan Higgins,
open list, Rob Herring, Rayn Chen, Steven Lee, Chin-Ting Kuo,
moderated list:ARM/ASPEED MACHINE SUPPORT,
open list:I2C SUBSYSTEM HOST DRIVERS
The 05/27/2021 23:20, Andrew Jeffery wrote:
>
>
> On Thu, 27 May 2021, at 19:55, Jamin Lin wrote:
> > Convert aspeed i2c to yaml.
> >
> > Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> > ---
> > .../devicetree/bindings/i2c/aspeed,i2c.yaml | 86 +++++++++++++++++++
> > .../devicetree/bindings/i2c/i2c-aspeed.txt | 49 -----------
> > 2 files changed, 86 insertions(+), 49 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
> >
> > diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > new file mode 100644
> > index 000000000000..1f7064d77708
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > @@ -0,0 +1,86 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs Device
> > Tree Bindings
> > +
> > +maintainers:
> > + - Rayn Chen <rayn_chen@aspeedtech.com>
> > +
> > +allOf:
> > + - $ref: /schemas/i2c/i2c-controller.yaml#
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - aspeed,ast2400-i2c-bus
> > + - aspeed,ast2500-i2c-bus
> > + - aspeed,ast2600-i2c-bus
> > +
> > + "#size-cells":
> > + const: 0
> > +
> > + "#address-cells":
> > + const: 1
> > +
> > + reg:
> > + minItems: 1
> > + maxItems: 2
> > + items:
> > + - description: address offset and range of bus
> > + - description: address offset and range of bus buffer
> > +
> > + interrupts:
> > + maxItems: 1
> > + description: interrupt number
> > +
> > + clocks:
> > + maxItems: 1
> > + description:
> > + root clock of bus, should reference the APB
> > + clock in the second cell
> > +
> > + reset:
> > + maxItems: 1
> > + description: phandle to reset controller with the reset number in
> > + the second cell
> > +
> > + bus-frequency:
> > + minimum: 500
> > + maximum: 4000000
> > + default: 100000
> > + description: frequency of the bus clock in Hz defaults to 100 kHz
> > when not
> > + specified
> > +
> > + multi-master:
> > + type: boolean
> > + description:
> > + states that there is another master active on this bus
> > +
> > +required:
> > + - reg
> > + - compatible
> > + - clocks
> > + - resets
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/clock/aspeed-clock.h>
> > + i2c0: i2c-bus@40 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + #interrupt-cells = <1>;
> > + reg = <0x40 0x40>;
> > + compatible = "aspeed,ast2500-i2c-bus";
> > + clocks = <&syscon ASPEED_CLK_APB>;
> > + resets = <&syscon ASPEED_RESET_I2C>;
> > + bus-frequency = <100000>;
> > + interrupts = <0>;
> > + interrupt-parent = <&i2c_ic>;
> > + status = "disabled";
> > + /* Does not need pinctrl properties */
>
> Note this actually isn't right and someone (me?) needs to send a patch
> to fix the devicetree(s) - the I2C mux properties for bus 0 and 1 just
> don't have a group, and so SCL and SDA need to be muxed individually.
>
> I expect we wound up with this comment by a lack of a match for an
> erroneous grep.
>
> Andrew
Understand. Can I change the example as the following or can you give me
any suggestion?
i2c0: i2c-bus@40 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x40 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <0>;
interrupt-parent = <&i2c_ic>;
Thanks-Jamin
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
2021-05-27 10:25 ` Jamin Lin
(?)
@ 2021-06-02 20:17 ` Rob Herring
-1 siblings, 0 replies; 18+ messages in thread
From: Rob Herring @ 2021-06-02 20:17 UTC (permalink / raw)
To: Jamin Lin
Cc: Joel Stanley, Andrew Jeffery, Brendan Higgins,
Benjamin Herrenschmidt, Rayn Chen,
open list:I2C SUBSYSTEM HOST DRIVERS,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM/ASPEED MACHINE SUPPORT,
moderated list:ARM/ASPEED MACHINE SUPPORT, open list,
moderated list:ARM/ASPEED I2C DRIVER, ryan_chen, chin-ting_kuo,
troy_lee, steven_lee
On Thu, May 27, 2021 at 06:25:05PM +0800, Jamin Lin wrote:
> Convert aspeed i2c to yaml.
>
> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> ---
> .../devicetree/bindings/i2c/aspeed,i2c.yaml | 86 +++++++++++++++++++
> .../devicetree/bindings/i2c/i2c-aspeed.txt | 49 -----------
> 2 files changed, 86 insertions(+), 49 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
>
> diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> new file mode 100644
> index 000000000000..1f7064d77708
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> @@ -0,0 +1,86 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs Device Tree Bindings
> +
> +maintainers:
> + - Rayn Chen <rayn_chen@aspeedtech.com>
> +
> +allOf:
> + - $ref: /schemas/i2c/i2c-controller.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - aspeed,ast2400-i2c-bus
> + - aspeed,ast2500-i2c-bus
> + - aspeed,ast2600-i2c-bus
> +
> + "#size-cells":
> + const: 0
> +
> + "#address-cells":
> + const: 1
These 2 are covered by i2c-controller.yaml.
> +
> + reg:
> + minItems: 1
> + maxItems: 2
> + items:
> + - description: address offset and range of bus
> + - description: address offset and range of bus buffer
> +
> + interrupts:
> + maxItems: 1
> + description: interrupt number
Drop. Not a useful description.
> +
> + clocks:
> + maxItems: 1
> + description:
> + root clock of bus, should reference the APB
> + clock in the second cell
> +
> + reset:
resets
> + maxItems: 1
> + description: phandle to reset controller with the reset number in
> + the second cell
No need to describe the format of 'resets'.
> +
> + bus-frequency:
> + minimum: 500
> + maximum: 4000000
> + default: 100000
> + description: frequency of the bus clock in Hz defaults to 100 kHz when not
> + specified
> +
> + multi-master:
> + type: boolean
> + description:
> + states that there is another master active on this bus
> +
> +required:
> + - reg
> + - compatible
> + - clocks
> + - resets
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/aspeed-clock.h>
> + i2c0: i2c-bus@40 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <1>;
> + reg = <0x40 0x40>;
> + compatible = "aspeed,ast2500-i2c-bus";
Convention is compatible first in the list of properties.
> + clocks = <&syscon ASPEED_CLK_APB>;
> + resets = <&syscon ASPEED_RESET_I2C>;
> + bus-frequency = <100000>;
> + interrupts = <0>;
> + interrupt-parent = <&i2c_ic>;
> + status = "disabled";
Don't show status in examples especially when disabling disables some
validation...
> + /* Does not need pinctrl properties */
> + };
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
@ 2021-06-02 20:17 ` Rob Herring
0 siblings, 0 replies; 18+ messages in thread
From: Rob Herring @ 2021-06-02 20:17 UTC (permalink / raw)
To: Jamin Lin
Cc: Joel Stanley, Andrew Jeffery, Brendan Higgins,
Benjamin Herrenschmidt, Rayn Chen,
open list:I2C SUBSYSTEM HOST DRIVERS,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM/ASPEED MACHINE SUPPORT,
moderated list:ARM/ASPEED MACHINE SUPPORT, open list,
moderated list:ARM/ASPEED I2C DRIVER, ryan_chen, chin-ting_kuo,
troy_lee, steven_lee
On Thu, May 27, 2021 at 06:25:05PM +0800, Jamin Lin wrote:
> Convert aspeed i2c to yaml.
>
> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> ---
> .../devicetree/bindings/i2c/aspeed,i2c.yaml | 86 +++++++++++++++++++
> .../devicetree/bindings/i2c/i2c-aspeed.txt | 49 -----------
> 2 files changed, 86 insertions(+), 49 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
>
> diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> new file mode 100644
> index 000000000000..1f7064d77708
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> @@ -0,0 +1,86 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs Device Tree Bindings
> +
> +maintainers:
> + - Rayn Chen <rayn_chen@aspeedtech.com>
> +
> +allOf:
> + - $ref: /schemas/i2c/i2c-controller.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - aspeed,ast2400-i2c-bus
> + - aspeed,ast2500-i2c-bus
> + - aspeed,ast2600-i2c-bus
> +
> + "#size-cells":
> + const: 0
> +
> + "#address-cells":
> + const: 1
These 2 are covered by i2c-controller.yaml.
> +
> + reg:
> + minItems: 1
> + maxItems: 2
> + items:
> + - description: address offset and range of bus
> + - description: address offset and range of bus buffer
> +
> + interrupts:
> + maxItems: 1
> + description: interrupt number
Drop. Not a useful description.
> +
> + clocks:
> + maxItems: 1
> + description:
> + root clock of bus, should reference the APB
> + clock in the second cell
> +
> + reset:
resets
> + maxItems: 1
> + description: phandle to reset controller with the reset number in
> + the second cell
No need to describe the format of 'resets'.
> +
> + bus-frequency:
> + minimum: 500
> + maximum: 4000000
> + default: 100000
> + description: frequency of the bus clock in Hz defaults to 100 kHz when not
> + specified
> +
> + multi-master:
> + type: boolean
> + description:
> + states that there is another master active on this bus
> +
> +required:
> + - reg
> + - compatible
> + - clocks
> + - resets
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/aspeed-clock.h>
> + i2c0: i2c-bus@40 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <1>;
> + reg = <0x40 0x40>;
> + compatible = "aspeed,ast2500-i2c-bus";
Convention is compatible first in the list of properties.
> + clocks = <&syscon ASPEED_CLK_APB>;
> + resets = <&syscon ASPEED_RESET_I2C>;
> + bus-frequency = <100000>;
> + interrupts = <0>;
> + interrupt-parent = <&i2c_ic>;
> + status = "disabled";
Don't show status in examples especially when disabling disables some
validation...
> + /* Does not need pinctrl properties */
> + };
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
@ 2021-06-02 20:17 ` Rob Herring
0 siblings, 0 replies; 18+ messages in thread
From: Rob Herring @ 2021-06-02 20:17 UTC (permalink / raw)
To: Jamin Lin
Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
ryan_chen, moderated list:ARM/ASPEED MACHINE SUPPORT,
Andrew Jeffery, moderated list:ARM/ASPEED I2C DRIVER, troy_lee,
Brendan Higgins, open list, Rayn Chen, steven_lee, chin-ting_kuo,
moderated list:ARM/ASPEED MACHINE SUPPORT,
open list:I2C SUBSYSTEM HOST DRIVERS
On Thu, May 27, 2021 at 06:25:05PM +0800, Jamin Lin wrote:
> Convert aspeed i2c to yaml.
>
> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> ---
> .../devicetree/bindings/i2c/aspeed,i2c.yaml | 86 +++++++++++++++++++
> .../devicetree/bindings/i2c/i2c-aspeed.txt | 49 -----------
> 2 files changed, 86 insertions(+), 49 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
>
> diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> new file mode 100644
> index 000000000000..1f7064d77708
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> @@ -0,0 +1,86 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs Device Tree Bindings
> +
> +maintainers:
> + - Rayn Chen <rayn_chen@aspeedtech.com>
> +
> +allOf:
> + - $ref: /schemas/i2c/i2c-controller.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - aspeed,ast2400-i2c-bus
> + - aspeed,ast2500-i2c-bus
> + - aspeed,ast2600-i2c-bus
> +
> + "#size-cells":
> + const: 0
> +
> + "#address-cells":
> + const: 1
These 2 are covered by i2c-controller.yaml.
> +
> + reg:
> + minItems: 1
> + maxItems: 2
> + items:
> + - description: address offset and range of bus
> + - description: address offset and range of bus buffer
> +
> + interrupts:
> + maxItems: 1
> + description: interrupt number
Drop. Not a useful description.
> +
> + clocks:
> + maxItems: 1
> + description:
> + root clock of bus, should reference the APB
> + clock in the second cell
> +
> + reset:
resets
> + maxItems: 1
> + description: phandle to reset controller with the reset number in
> + the second cell
No need to describe the format of 'resets'.
> +
> + bus-frequency:
> + minimum: 500
> + maximum: 4000000
> + default: 100000
> + description: frequency of the bus clock in Hz defaults to 100 kHz when not
> + specified
> +
> + multi-master:
> + type: boolean
> + description:
> + states that there is another master active on this bus
> +
> +required:
> + - reg
> + - compatible
> + - clocks
> + - resets
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/aspeed-clock.h>
> + i2c0: i2c-bus@40 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <1>;
> + reg = <0x40 0x40>;
> + compatible = "aspeed,ast2500-i2c-bus";
Convention is compatible first in the list of properties.
> + clocks = <&syscon ASPEED_CLK_APB>;
> + resets = <&syscon ASPEED_RESET_I2C>;
> + bus-frequency = <100000>;
> + interrupts = <0>;
> + interrupt-parent = <&i2c_ic>;
> + status = "disabled";
Don't show status in examples especially when disabling disables some
validation...
> + /* Does not need pinctrl properties */
> + };
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
2021-06-02 20:17 ` Rob Herring
(?)
@ 2021-06-03 1:46 ` Jamin Lin
-1 siblings, 0 replies; 18+ messages in thread
From: Jamin Lin @ 2021-06-03 1:46 UTC (permalink / raw)
To: Rob Herring
Cc: Joel Stanley, Andrew Jeffery, Brendan Higgins,
Benjamin Herrenschmidt, Rayn Chen,
open list:I2C SUBSYSTEM HOST DRIVERS,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM/ASPEED MACHINE SUPPORT,
moderated list:ARM/ASPEED MACHINE SUPPORT, open list,
moderated list:ARM/ASPEED I2C DRIVER, Ryan Chen, Chin-Ting Kuo,
Troy Lee, Steven Lee
The 06/02/2021 20:17, Rob Herring wrote:
> On Thu, May 27, 2021 at 06:25:05PM +0800, Jamin Lin wrote:
> > Convert aspeed i2c to yaml.
> >
> > Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> > ---
> > .../devicetree/bindings/i2c/aspeed,i2c.yaml | 86 +++++++++++++++++++
> > .../devicetree/bindings/i2c/i2c-aspeed.txt | 49 -----------
> > 2 files changed, 86 insertions(+), 49 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
> >
> > diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > new file mode 100644
> > index 000000000000..1f7064d77708
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > @@ -0,0 +1,86 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs Device Tree Bindings
> > +
> > +maintainers:
> > + - Rayn Chen <rayn_chen@aspeedtech.com>
> > +
> > +allOf:
> > + - $ref: /schemas/i2c/i2c-controller.yaml#
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - aspeed,ast2400-i2c-bus
> > + - aspeed,ast2500-i2c-bus
> > + - aspeed,ast2600-i2c-bus
> > +
> > + "#size-cells":
> > + const: 0
> > +
> > + "#address-cells":
> > + const: 1
>
> These 2 are covered by i2c-controller.yaml.
>
Will remove them.
> > +
> > + reg:
> > + minItems: 1
> > + maxItems: 2
> > + items:
> > + - description: address offset and range of bus
> > + - description: address offset and range of bus buffer
> > +
> > + interrupts:
> > + maxItems: 1
> > + description: interrupt number
>
> Drop. Not a useful description.
>
Will remove it.
> > +
> > + clocks:
> > + maxItems: 1
> > + description:
> > + root clock of bus, should reference the APB
> > + clock in the second cell
> > +
> > + reset:
>
> resets
>
Thanks to find the typo.
> > + maxItems: 1
> > + description: phandle to reset controller with the reset number in
> > + the second cell
>
> No need to describe the format of 'resets'.
>
> > +
> > + bus-frequency:
> > + minimum: 500
> > + maximum: 4000000
> > + default: 100000
> > + description: frequency of the bus clock in Hz defaults to 100 kHz when not
> > + specified
> > +
> > + multi-master:
> > + type: boolean
> > + description:
> > + states that there is another master active on this bus
> > +
> > +required:
> > + - reg
> > + - compatible
> > + - clocks
> > + - resets
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/clock/aspeed-clock.h>
> > + i2c0: i2c-bus@40 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + #interrupt-cells = <1>;
> > + reg = <0x40 0x40>;
> > + compatible = "aspeed,ast2500-i2c-bus";
>
> Convention is compatible first in the list of properties.
>
Will move compatible first in the list of properties.
> > + clocks = <&syscon ASPEED_CLK_APB>;
> > + resets = <&syscon ASPEED_RESET_I2C>;
> > + bus-frequency = <100000>;
> > + interrupts = <0>;
> > + interrupt-parent = <&i2c_ic>;
> > + status = "disabled";
>
> Don't show status in examples especially when disabling disables some
> validation...
>
Will remove it.
> > + /* Does not need pinctrl properties */
> > + };
Thanks for your suggestion. I will send v3 patch.
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
@ 2021-06-03 1:46 ` Jamin Lin
0 siblings, 0 replies; 18+ messages in thread
From: Jamin Lin @ 2021-06-03 1:46 UTC (permalink / raw)
To: Rob Herring
Cc: Joel Stanley, Andrew Jeffery, Brendan Higgins,
Benjamin Herrenschmidt, Rayn Chen,
open list:I2C SUBSYSTEM HOST DRIVERS,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM/ASPEED MACHINE SUPPORT,
moderated list:ARM/ASPEED MACHINE SUPPORT, open list,
moderated list:ARM/ASPEED I2C DRIVER, Ryan Chen, Chin-Ting Kuo,
Troy Lee, Steven Lee
The 06/02/2021 20:17, Rob Herring wrote:
> On Thu, May 27, 2021 at 06:25:05PM +0800, Jamin Lin wrote:
> > Convert aspeed i2c to yaml.
> >
> > Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> > ---
> > .../devicetree/bindings/i2c/aspeed,i2c.yaml | 86 +++++++++++++++++++
> > .../devicetree/bindings/i2c/i2c-aspeed.txt | 49 -----------
> > 2 files changed, 86 insertions(+), 49 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
> >
> > diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > new file mode 100644
> > index 000000000000..1f7064d77708
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > @@ -0,0 +1,86 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs Device Tree Bindings
> > +
> > +maintainers:
> > + - Rayn Chen <rayn_chen@aspeedtech.com>
> > +
> > +allOf:
> > + - $ref: /schemas/i2c/i2c-controller.yaml#
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - aspeed,ast2400-i2c-bus
> > + - aspeed,ast2500-i2c-bus
> > + - aspeed,ast2600-i2c-bus
> > +
> > + "#size-cells":
> > + const: 0
> > +
> > + "#address-cells":
> > + const: 1
>
> These 2 are covered by i2c-controller.yaml.
>
Will remove them.
> > +
> > + reg:
> > + minItems: 1
> > + maxItems: 2
> > + items:
> > + - description: address offset and range of bus
> > + - description: address offset and range of bus buffer
> > +
> > + interrupts:
> > + maxItems: 1
> > + description: interrupt number
>
> Drop. Not a useful description.
>
Will remove it.
> > +
> > + clocks:
> > + maxItems: 1
> > + description:
> > + root clock of bus, should reference the APB
> > + clock in the second cell
> > +
> > + reset:
>
> resets
>
Thanks to find the typo.
> > + maxItems: 1
> > + description: phandle to reset controller with the reset number in
> > + the second cell
>
> No need to describe the format of 'resets'.
>
> > +
> > + bus-frequency:
> > + minimum: 500
> > + maximum: 4000000
> > + default: 100000
> > + description: frequency of the bus clock in Hz defaults to 100 kHz when not
> > + specified
> > +
> > + multi-master:
> > + type: boolean
> > + description:
> > + states that there is another master active on this bus
> > +
> > +required:
> > + - reg
> > + - compatible
> > + - clocks
> > + - resets
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/clock/aspeed-clock.h>
> > + i2c0: i2c-bus@40 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + #interrupt-cells = <1>;
> > + reg = <0x40 0x40>;
> > + compatible = "aspeed,ast2500-i2c-bus";
>
> Convention is compatible first in the list of properties.
>
Will move compatible first in the list of properties.
> > + clocks = <&syscon ASPEED_CLK_APB>;
> > + resets = <&syscon ASPEED_RESET_I2C>;
> > + bus-frequency = <100000>;
> > + interrupts = <0>;
> > + interrupt-parent = <&i2c_ic>;
> > + status = "disabled";
>
> Don't show status in examples especially when disabling disables some
> validation...
>
Will remove it.
> > + /* Does not need pinctrl properties */
> > + };
Thanks for your suggestion. I will send v3 patch.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
@ 2021-06-03 1:46 ` Jamin Lin
0 siblings, 0 replies; 18+ messages in thread
From: Jamin Lin @ 2021-06-03 1:46 UTC (permalink / raw)
To: Rob Herring
Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Ryan Chen, moderated list:ARM/ASPEED MACHINE SUPPORT,
Andrew Jeffery, moderated list:ARM/ASPEED I2C DRIVER, Troy Lee,
Brendan Higgins, open list, Rayn Chen, Steven Lee, Chin-Ting Kuo,
moderated list:ARM/ASPEED MACHINE SUPPORT,
open list:I2C SUBSYSTEM HOST DRIVERS
The 06/02/2021 20:17, Rob Herring wrote:
> On Thu, May 27, 2021 at 06:25:05PM +0800, Jamin Lin wrote:
> > Convert aspeed i2c to yaml.
> >
> > Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> > ---
> > .../devicetree/bindings/i2c/aspeed,i2c.yaml | 86 +++++++++++++++++++
> > .../devicetree/bindings/i2c/i2c-aspeed.txt | 49 -----------
> > 2 files changed, 86 insertions(+), 49 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
> >
> > diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > new file mode 100644
> > index 000000000000..1f7064d77708
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > @@ -0,0 +1,86 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs Device Tree Bindings
> > +
> > +maintainers:
> > + - Rayn Chen <rayn_chen@aspeedtech.com>
> > +
> > +allOf:
> > + - $ref: /schemas/i2c/i2c-controller.yaml#
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - aspeed,ast2400-i2c-bus
> > + - aspeed,ast2500-i2c-bus
> > + - aspeed,ast2600-i2c-bus
> > +
> > + "#size-cells":
> > + const: 0
> > +
> > + "#address-cells":
> > + const: 1
>
> These 2 are covered by i2c-controller.yaml.
>
Will remove them.
> > +
> > + reg:
> > + minItems: 1
> > + maxItems: 2
> > + items:
> > + - description: address offset and range of bus
> > + - description: address offset and range of bus buffer
> > +
> > + interrupts:
> > + maxItems: 1
> > + description: interrupt number
>
> Drop. Not a useful description.
>
Will remove it.
> > +
> > + clocks:
> > + maxItems: 1
> > + description:
> > + root clock of bus, should reference the APB
> > + clock in the second cell
> > +
> > + reset:
>
> resets
>
Thanks to find the typo.
> > + maxItems: 1
> > + description: phandle to reset controller with the reset number in
> > + the second cell
>
> No need to describe the format of 'resets'.
>
> > +
> > + bus-frequency:
> > + minimum: 500
> > + maximum: 4000000
> > + default: 100000
> > + description: frequency of the bus clock in Hz defaults to 100 kHz when not
> > + specified
> > +
> > + multi-master:
> > + type: boolean
> > + description:
> > + states that there is another master active on this bus
> > +
> > +required:
> > + - reg
> > + - compatible
> > + - clocks
> > + - resets
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/clock/aspeed-clock.h>
> > + i2c0: i2c-bus@40 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + #interrupt-cells = <1>;
> > + reg = <0x40 0x40>;
> > + compatible = "aspeed,ast2500-i2c-bus";
>
> Convention is compatible first in the list of properties.
>
Will move compatible first in the list of properties.
> > + clocks = <&syscon ASPEED_CLK_APB>;
> > + resets = <&syscon ASPEED_RESET_I2C>;
> > + bus-frequency = <100000>;
> > + interrupts = <0>;
> > + interrupt-parent = <&i2c_ic>;
> > + status = "disabled";
>
> Don't show status in examples especially when disabling disables some
> validation...
>
Will remove it.
> > + /* Does not need pinctrl properties */
> > + };
Thanks for your suggestion. I will send v3 patch.
^ permalink raw reply [flat|nested] 18+ messages in thread