From: Nishanth Menon <nm@ti.com>
To: Sinthu Raja <sinthu.raja@mistralsolutions.com>
Cc: Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Device Tree Mailing List <devicetree@vger.kernel.org>,
Linux ARM Mailing List <linux-arm-kernel@lists.infradead.org>,
Lokesh Vutla <lokeshvutla@ti.com>,
Amarnath MB <amarnath.mb@ti.com>,
Sinthu Raja <sinthu.raja@ti.com>
Subject: Re: [PATCH V2 0/2] arm64: Initial support for Texas Instruments J721E EAIK
Date: Mon, 7 Jun 2021 08:35:54 -0500 [thread overview]
Message-ID: <20210607133554.rkamd6zfiq35wuut@judgingly> (raw)
In-Reply-To: <20210607093314.23909-1-sinthu.raja@ti.com>
On 15:03-20210607, Sinthu Raja wrote:
> From: Sinthu Raja <sinthu.raja@ti.com>
>
> J721E EdgeAI Kit (EAIK) is a low cost, small form factor board designed
> for TI’s J721E SoC. This series intoduces the basic support for J721E
> EAIK
>
> Changes in v2:
> - Fix for dt_binding_check error.
> - Modified base commit to the recent RC1.
>
> Sinthu Raja (2):
> dt-bindings: arm: ti: Add bindings for J721E EAIK
> arm64: dts: ti: Add support for J721E EAIK
>
> .../devicetree/bindings/arm/ti/k3.yaml | 2 +
> .../bindings/remoteproc/ti,k3-dsp-rproc.yaml | 2 +-
> arch/arm64/boot/dts/ti/Makefile | 2 +
> arch/arm64/boot/dts/ti/k3-j721e-eaik.dts | 342 ++++++++++++++++++
> 4 files changed, 347 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-eaik.dts
>
>
> base-commit: 6efb943b8616ec53a5e444193dccf1af9ad627b5
This might be a little too late for 5.14 window, i have provided
some basic comments on the same.
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
WARNING: multiple messages have this Message-ID (diff)
From: Nishanth Menon <nm@ti.com>
To: Sinthu Raja <sinthu.raja@mistralsolutions.com>
Cc: Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Device Tree Mailing List <devicetree@vger.kernel.org>,
Linux ARM Mailing List <linux-arm-kernel@lists.infradead.org>,
Lokesh Vutla <lokeshvutla@ti.com>,
Amarnath MB <amarnath.mb@ti.com>,
Sinthu Raja <sinthu.raja@ti.com>
Subject: Re: [PATCH V2 0/2] arm64: Initial support for Texas Instruments J721E EAIK
Date: Mon, 7 Jun 2021 08:35:54 -0500 [thread overview]
Message-ID: <20210607133554.rkamd6zfiq35wuut@judgingly> (raw)
In-Reply-To: <20210607093314.23909-1-sinthu.raja@ti.com>
On 15:03-20210607, Sinthu Raja wrote:
> From: Sinthu Raja <sinthu.raja@ti.com>
>
> J721E EdgeAI Kit (EAIK) is a low cost, small form factor board designed
> for TI’s J721E SoC. This series intoduces the basic support for J721E
> EAIK
>
> Changes in v2:
> - Fix for dt_binding_check error.
> - Modified base commit to the recent RC1.
>
> Sinthu Raja (2):
> dt-bindings: arm: ti: Add bindings for J721E EAIK
> arm64: dts: ti: Add support for J721E EAIK
>
> .../devicetree/bindings/arm/ti/k3.yaml | 2 +
> .../bindings/remoteproc/ti,k3-dsp-rproc.yaml | 2 +-
> arch/arm64/boot/dts/ti/Makefile | 2 +
> arch/arm64/boot/dts/ti/k3-j721e-eaik.dts | 342 ++++++++++++++++++
> 4 files changed, 347 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-eaik.dts
>
>
> base-commit: 6efb943b8616ec53a5e444193dccf1af9ad627b5
This might be a little too late for 5.14 window, i have provided
some basic comments on the same.
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-06-07 13:36 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-07 9:33 [PATCH V2 0/2] arm64: Initial support for Texas Instruments J721E EAIK Sinthu Raja
2021-06-07 9:33 ` Sinthu Raja
2021-06-07 9:33 ` [PATCH V2 1/2] dt-bindings: arm: ti: Add bindings for " Sinthu Raja
2021-06-07 9:33 ` Sinthu Raja
2021-06-07 13:32 ` Nishanth Menon
2021-06-07 13:32 ` Nishanth Menon
2021-06-07 16:56 ` Sinthu Raja M
2021-06-07 16:56 ` Sinthu Raja M
2021-06-07 20:20 ` Nishanth Menon
2021-06-07 20:20 ` Nishanth Menon
2021-06-07 9:33 ` [PATCH V2 2/2] arm64: dts: ti: Add support " Sinthu Raja
2021-06-07 9:33 ` Sinthu Raja
2021-06-07 13:35 ` Nishanth Menon
2021-06-07 13:35 ` Nishanth Menon
2021-06-07 17:11 ` Sinthu Raja M
2021-06-07 17:11 ` Sinthu Raja M
2021-06-07 20:22 ` Nishanth Menon
2021-06-07 20:22 ` Nishanth Menon
2021-06-09 13:41 ` Vignesh Raghavendra
2021-06-09 13:41 ` Vignesh Raghavendra
2021-06-07 13:35 ` Nishanth Menon [this message]
2021-06-07 13:35 ` [PATCH V2 0/2] arm64: Initial support for Texas Instruments " Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210607133554.rkamd6zfiq35wuut@judgingly \
--to=nm@ti.com \
--cc=amarnath.mb@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=lokeshvutla@ti.com \
--cc=robh+dt@kernel.org \
--cc=sinthu.raja@mistralsolutions.com \
--cc=sinthu.raja@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.