* [PULL] 1st set of IIO new device support, features and cleanups for 5.14
@ 2021-06-08 16:32 Jonathan Cameron
2021-06-09 10:12 ` Greg KH
0 siblings, 1 reply; 2+ messages in thread
From: Jonathan Cameron @ 2021-06-08 16:32 UTC (permalink / raw)
To: gregkh, linux-iio
The following changes since commit d8218b0de51f36f01ed67731ccf174059a33bb1e:
Merge 5.13-rc2 into staging-next (2021-05-17 09:47:44 +0200)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.14a
for you to fetch changes up to 41340965b4f8055f975f73e1e3d23eff8038f013:
Merge branch 'ib-iio-i2c-5.13rc1' into togreg Adds a stub needed to resolve a build conflict for the fxls8962af driver. (2021-06-07 09:20:02 +0100)
----------------------------------------------------------------
1st set of new IIO/counter device support, features and cleanup for 5.14
There are a couple of large cleanup sets in here alongside a number of new
drivers.
Note an immutable branch merged to add a stub for i2c_verify_client()
as needed to avoid a build issue in the fxls8962af driver as a result of a
workaround for a device errata that only applies when i2c interface is used.
Counters
========
New device support
* intel,quadrature encoder peripheral found on Elkhart Lake platforms.
- New driver.
IIO
===
New device support
* amstaos,tsl2591 ambient light sensor.
- New driver + bindings
- Follow up fix to ensure some local variables are suitable for error
handling.
* fsl,fxls8962af + fsl,fxls8964af accelerometers
- New driver + bindings
- Includes an errata work around that cause a build bot failure fixed
by adding a stub to i2c.
* kionix,kxcjk-1013
- Add support for KX023-1025 device. Mostly a different register map
that needed to be supported.
* murata,sca3300 accelerometer
- New driver + bindings
* st,lsm9ds0 IMU
- Rework of st,sensors driver to cleanly support this new glue driver
that enables the two parts of the LSM9DS0.
* ti,tsc2046 touchscreen controller ADC.
- New driver. Intent here is to use this with existing IIO consumer
drivers such as resistive-adc-touch.
- Follow up fix to avoid an issue with unsigned subtraction in error
check.
* ti,tmp117 digital temperature sensor
- New driver + bindings
Features
* adi,ad5755
- Add missing dt-binding doc
* adi,ad7298
- Add ACPI ID used on Intel Galileo Gen 1 boards.
- Add missing dt-binding doc
* adi,ad7476
- Add missing dt-binding doc
* adi,ad7746
- Add missing dt-binding doc for this driver that will hopefully move out
of staging shortly. Update staging driver to use the binding instead of
platform data.
* adi,adis16201 + adis16209
- Add missing dt-binding doc
* adi,adis16480
- Support burst mode for adis16495 and adis16497 parts.
* bosch,bma220
- Add missing dt-binding doc
* fsl,mma7455
- Add missing dt-binding doc
* iio-rescale
- Support handling of processed channels from provider. Some ADCs
require (typically non linear) calibration functions to be applied,
and so provide only IIO_CHAN_INFO_PROCESSED read back. They can be
used as providers to the iio-rescale driver which needs to handle them
somewhat differently from IIO_CHAN_INFO_RAW
* sensiron,sps30
- Support the serial interface. Note this required significant
refactoring of existing driver.
* st,st-sensors
- Add mount matrix support for normal dt-binding whilst continuing to
support the odd ACPI approach for accelerometers.
* ti,dac082s085 + similar
- Add missing dt-binding doc
* trivial-devices - add entries for
- memsic,mx4005, memsic,mx6255 and memsic,mxc6655
- sensortek,stk8312 and sensortek,stk8ba50
Cleanup / minor fixes
* core
- Use devm_add_action_or_reset() to replace boilerplate in several
driver and core IIO devm_* functions.
- Fix an error path issue introduced by above, that could return an
error pointer rather than the expected null from dev_iio_device_alloc()
- Move more IIO internals related fields from struct iio_dev to
struct iio_dev_opaque.
- Drop unused final update of in_loc in demux setup.
* Docs
- Move some docs from driver specific to core dos to avoid replication
of names which the documentation builder does not allow.
Note this means adding a few device specific notes to the general docs
to cover the more unusual uses of the ABI.
- ABI: Move old buffer/* and scan_elements/* docs to obsolete as now we
have the bufferX/* variant. Not we are not getting rid of these
interfaces, just encouraging new code to use the new interface.
* IIO wide:
- Tidy up new cases of dev.parent etc being set in drivers as the core
now does it.
- Fix more cases of possible miss-aligned buffers when passed to
iio_push_to_buffers_with_timestamp(). Note we only have one known
instance of anyone seeing this bug actually happening, so this has been
a low priority cleanup effort for several cycles.
- sysfs_emit() used in more drivers.
- Runtime pm tidy up and use of pm_runtime_resume_and_get()
- Buffer alignment fixes as iio_push_to_buffers_with_timestamp requires
that the timestamp when inserted by naturally aligned + consumers can
assume that all fields are naturally aligned. Part of a long running
effort, with at least 2 more series to come tackling additional
variants.
- Stop specifying "mount-matrix" property name in every lookup of the
mount matrix from firmware by hard coding it in the core.
* adi,ad7476
- Handle the variety of different regulators used by the parts supported
by this driver (came up in dt-binding review)
* adi,ad7746
- Trivial drop of if (ret) return ret; return 0; pattern
- Tidy up comments
- Pull capdac setup out to own function.
* adi,ad7766
- Trivial drop of if (ret) return ret; return 0; pattern
* adi,adis
- Avoid returning error codes in interrupt handlers.
- Handle a failure in spi_write in the trigger handler.
- Rework to add updating of device page after changing it.
- Don't push data to IIO buffers when read failed.
- Add configuration of burst max speed to core avoid handling this in
each driver.
- Use the adis_dev_lock() helper in adis16260 and adis16136 drivers.
- Excessive includes cleanup via include-what-you-use static checker
after zero day highlighted that these needed updating.
* afe
- Amend binding to add #io-channel-cells, thus allowing this IIO
consumer to also be an IIO provider.
* aosong,am2315
- Drop ACPI id. Unlikely this one is in the wild and it isn't valid
ACPI naming.
* bosch,bma180
- Adding missing bandwidth settings (500, 1000 Hz)
* bosch,bme680
- Drop ACPI id. Unlikely this one is in the wild and it isn't valid
ACPI naming.
* ep93xx_adc,
- Drop a redundant error print.
* maxim,max118
- Convert remainder of probe() to devm_ managed functions.
- Avoid some repeated jumping back and forth between iio_dev and
spi structures.
* maxim,max11100
- Use get_unaligned_be16() instead of open coding.
- Convert remainder of probe() to devm_ managed functions.
* samsung,exynos_adc
- Unused error value dropped.
* sensiron,sgp30
- Drop use of %hx in favor of %x and letting the normal type conversion
work.
* sensortek,stk8312
- Add lowercase device id and note uppercase version deprecated.
- Drop ACPI id. Unlikely this one is in the wild and it isn't valid
ACPI naming.
* sprx,sc72xx_adc
- add MODULE_DEVICE_TABLE
* st,lsm6dsx
- Fix docs of valid ODRs
* st,sensors
- dt-binding rework. Two efforts on this crossed in a previous cycle
so this update cherry picks the best of the two yaml conversions.
- Don't copy the channel spec array as now ext_info is no longer modified.
* st,stm32-adc
- tidy up some docs that were marked as kernel-doc but aren't.
* ti,adc081c, ti,adc0832, ti,adc108s102 and ti,adc161s626
- Convert remainder of probe() functions to devm_ managed functions
to simplify error handing and remove paths.
----------------------------------------------------------------
Andy Shevchenko (9):
iio: adc: ad7298: Enable on Intel Galileo Gen 1
iio: accel: st_accel: Move platform data from header to C file
iio: gyro: st_gyro: Move platform data from header to C file
iio: magnetometer: st_magn: Provide default platform data
iio: st_sensors: Call st_sensors_power_enable() from bus drivers
iio: st_sensors: Make accel, gyro, magn and pressure probe shared
iio: st_sensors: Add lsm9ds0 IMU support
dt-bindings: iio: st,st-sensors: Add LSM9DS0 compatible string
iio: Drop Duplicated "mount-matrix" parameter
Chunyan Zhang (1):
iio: adc: Add missing MODULE_DEVICE_TABLE
Dan Carpenter (4):
iio: core: Fix an error pointer vs NULL bug in devm_iio_device_alloc()
iio: light: tsl2591: fix some signedness bugs
iio: light: tsl2591: delete a stray tab
iio: adc: tsc2046: fix a warning message in tsc2046_adc_update_scan_mode()
Guenter Roeck (4):
iio: am2315: Remove acpi_device_id table
iio:accel:stk8312: Remove acpi_device_id table
iio: bme680_spi: Remove acpi_device_id table
iio: bme680_i2c: Remove acpi_device_id table
Jarkko Nikula (1):
counter: Add support for Intel Quadrature Encoder Peripheral
Jiapeng Chong (1):
iio: buffer: Remove redundant assignment to in_loc
Joe Sandom (2):
iio: light: Added AMS tsl2591 driver implementation
dt-bindings: iio: light: Added AMS tsl2591 device tree binding
Jonathan Cameron (89):
dt-bindings:iio:accel:adis16201 and adis16209 bindings
dt-bindings:iio:accel:bosch,bma220 device tree binding documentation
dt-bindings:iio:accel:fsl,mma7455 binding doc
dt-bindings:trivial-devices: Add memsic,mxc4005/mxc6255/mxc6655 entries
dt-bindings:trivial-devices: Add sensortek,stk8312 and sensortek,s8ba50
dt-bindings:iio:adc:adi,ad7298 document bindings
iio:accel:stk8312: Add lowercase i2c device id
dt-bindings:iio:dac:ti,dac082s085 yaml conversion
iio:adc:ad7476: Handle the different regulators used by various parts.
dt-bindings:iio:adc:adi,ad7476: Add missing binding document
iio:ABI docs: Fix up duplicate *_calibbias_* documentation for icm42600
iio:ABI docs: Drop device specific docs for _powerdown for the adf4371
iio:ABI docs: Fix issue around repeated definition of out_currentY_raw
iio:ABI docs: Move specific description of out_altvoltageX_frequency to main docs.
iio: adc: stm32-adc: Fix docs wrongly marked as kernel-doc
iio: accel: bmi088: Drop manual assignment of iio_dev.dev.parent
iio: dac: ad5766: Drop duplicate setting of iio_dev.dev.parent and of_node
iio: adc: mp2629: Drop duplicate setting iio_dev.dev.parent
iio: adc: mt6360: Drop duplicate setting of iio_dev.dev.parent
iio: adc: ti-ads131e08: Drop duplicate setting of iio_dev.dev.parent
iio: humidity: hdc2010: Drop duplicate setting of iio_dev.dev.parent
iio: position: hid-sensor-custom-intel-hinge: Drop duplicate parent setting.
iio: common: scmi_sensors: Drop duplicate setting of iio_dev.dev.parent
iio: core: move @id from struct iio_dev to struct iio_dev_opaque
iio: avoid shadowing of variable name in to_iio_dev_opaque()
iio: core: move @driver_module from struct iio_dev to struct iio_dev_opaque
iio: core: move @trig_readonly from struct iio_dev to struct iio_dev_opaque
iio: core: move @scan_index_timestamp to struct iio_dev_opaque
iio: core: move @info_exist_lock to struct iio_dev_opaque
iio: core: move @chrdev from struct iio_dev to struct iio_dev_opaque
iio: core: move @flags from struct iio_dev to struct iio_dev_opaque
iio: core: move @clock_id from struct iio_dev to struct iio_dev_opaque
dt-bindings:iio:dac:ad5755: txt to yaml format conversion.
iio: gyro: fxa21002c: Balance runtime pm + use pm_runtime_resume_and_get().
iio: light: isl29028: Balance runtime pm + use pm_runtime_resume_and_get()
iio: light: tsl2583: Balance runtime pm + use pm_runtime_resume_and_get()
iio: accel: bmc150-accel: Balanced runtime pm + use pm_runtime_resume_and_get()
iio: accel: mma9551/3: Balance untime pm + use pm_runtime_resume_and_get()
iio: accel: kxcjk-1013: Balance runtime pm + use pm_runtime_resume_and_get()
iio: imu: kmx61: Balance runtime pm + use pm_runtime_resume_and_get()
iio: adc: stm32-adc: Use pm_runtime_resume_and_get() to replace open coding.
iio: adc: stm32-dfsdm: Use pm_runtime_resume_and_get() to replace open coding.
iio: dac: stm32-dac: Use pm_runtime_resume_and_get() to replace open coding.
iio: light: us5182: Use pm_runtime_resume_and_get() to replace open coding.
iio: temp: mlx90614: Handle failure in pm_runtime_resume_and_get()
iio: adc: rcar-gyroadc: Use pm_runtime_resume_and_get() and check in probe()
iio: proximity: srf04: Use pm_runtime_resume_and_get() and handle error
iio: light: vcnl4000: Use pm_runtime_resume_and_get() to replace open coding.
iio: light: vcnl4035: Use pm_runtime_resume_and_get() to replace open coding.
iio: accel: bmi088: Balance runtime pm + use pm_runtime_resume_and_get()
iio: magn: bmc150: Balance runtime pm + use pm_runtime_resume_and_get()
iio: light: rpr0521: Balance runtime pm + use pm_runtime_resume_and_get()
iio: accel: mma8452: Balance runtime pm + use pm_runtime_resume_and_get()
iio: accel: bma180: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: accel: bma220: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: accel: hid: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: accel: kxcjk-1013: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: accel: mxc4005: Fix overread of data and alignment issue.
iio: accel: stk8312: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: accel: stk8ba50: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: adc: ti-ads1015: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: adc: vf610: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: gyro: bmg160: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: humidity: am2315: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: prox: srf08: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: prox: pulsed-light: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: prox: as3935: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: magn: hmc5843: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: magn: bmc150: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: light: isl29125: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: light: tcs3414: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: light: tcs3472: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: chemical: atlas: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: cros_ec_sensors: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()
iio: potentiostat: lmp91000: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()
iio: light: pa12203001: Use pm_runtime_resume_and_get() to replace open coding.
iio: hid: trigger: Balance runtime pm + use pm_runtime_resume_and_get()
iio: chemical: sgp30: Drop use of %hx in format string.
iio: adc: max11100: Use get_unaligned_be16() rather than opencoding.
iio: adc: max11100: Use devm_ functions for rest of probe()
iio: adc: max1118: Use devm_ managed functions for all of probe
iio: adc: max1118: Avoid jumping back and forth between spi and iio structures
iio: adc: ti-adc081c: Use devm managed functions for all of probe()
iio: adc: ti-adc0832: Use devm managed functions for all of probe()
iio: adc: ti-adc108s102: Use devm managed functions for all of probe()
iio: adc: ti-adc161s626: Use devm managed functions for all of probe.
iio: adis: Cleanout unused headers
i2c: core: Add stub for i2c_verify_client() if !CONFIG_I2C
Merge branch 'ib-iio-i2c-5.13rc1' into togreg Adds a stub needed to resolve a build conflict for the fxls8962af driver.
Krzysztof Kozlowski (2):
iio: adc: exynos: drop unneeded variable assignment
dt-bindings: iio: afe: current-sense-shunt: add io-channel-cells
Linus Walleij (7):
iio: st-sensors: Update ST Sensor bindings
iio: afe: iio-rescale: Support processed channels
iio: st_sensors: Create extended attr macro
iio: accel: st_sensors: Support generic mounting matrix
iio: accel: st_sensors: Stop copying channels
iio: magnetometer: st_magn: Support mount matrix
iio: gyro: st_gyro: Support mount matrix
Lucas Stankus (5):
dt-bindings: staging: iio: cdc: ad7746: add binding documentation for AD7746
staging: iio: cdc: ad7746: use dt for capacitive channel setup.
staging: iio: cdc: ad7746: remove ordinary comments
staging: iio: cdc: ad7746: clean up probe return
staging: iio: cdc: ad7746: extract capac setup to own function
Mauro Carvalho Chehab (1):
iio: Documentation: move incompatible ABI to obsolete
Nuno Sa (10):
iio: adis_buffer: do not return ints in irq handlers
iio: adis16400: do not return ints in irq handlers
iio: adis_buffer: check return value on page change
iio: adis16475: do not return ints in irq handlers
iio: adis_buffer: update device page after changing it
iio: adis_buffer: don't push data to buffers on failure
iio: adis: add burst_max_speed_hz variable
iio: adis16475: do not directly change spi 'max_speed_hz'
iio: adis16400: do not directly change spi 'max_speed_hz'
iio: adis16480: support burst read function
Nuno Sá (2):
iio: adis16260: make use of adis lock helpers
iio: adis16136: make use of adis lock helpers
Oleksij Rempel (3):
dt-bindings:iio:adc: add generic settling-time-us and oversampling-ratio channel properties
dt-bindings:iio:adc: add documentation for TI TSC2046 controller
iio: adc: add ADC driver for the TI TSC2046 controller
Puranjay Mohan (2):
dt-bindings: iio: temperature: Add DT bindings for TMP117
iio: temperature: add driver support for ti tmp117
Sean Nyekjaer (7):
iio: imu: st_lsm6dsx: correct ODR in header
iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers
dt-bindings: iio: accel: fxls8962af: add bindings
iio: accel: fxls8962af: add set/get of samplerate
iio: accel: fxls8962af: add interrupt support
iio: accel: fxls8962af: add hw buffered sampling
iio: accel: fxls8962af: fix errata bug E3 - I2C burst reads
Stephan Gerhold (4):
dt-bindings: iio: kionix,kxcjk1013: Document kionix,kx023-1025
iio: accel: kxcjk-1013: Refactor configuration registers into struct
iio: accel: kxcjk-1013: Add support for KX023-1025
iio: accel: bma180: Add missing 500 Hz / 1000 Hz bandwidth
Tang Bin (2):
iio:adc:ad7766: Fix unnecessary check in ad7766_probe()
staging: iio: cdc: ad7746: Remove unnecessary assignment in ad7746_probe()
Tian Tao (3):
iio:chemical:sps30: Convert sysfs sprintf/snprintf family to sysfs_emit
iio: light: Convert sysfs sprintf/snprintf family to sysfs_emit
iio: trigger: stm32-timer: Convert sysfs sprintf/snprintf family to sysfs_emit
Tomas Melin (2):
dt-bindings: iio: accel: Add SCA3300 documentation
iio: accel: Add driver for Murata SCA3300 accelerometer
Tomasz Duszynski (3):
iio: sps30: separate core and interface specific code
iio: sps30: add support for serial interface
dt-bindings: iio: chemical: sps30: update binding with serial example
Yicong Yang (7):
iio: adc: adi-axi-adc: simplify devm_adi_axi_adc_conv_register()
iio: buffer-dmaengine: simplify __devm_iio_dmaengine_buffer_free()
iio: hw_consumer: simplify devm_iio_hw_consumer_alloc()
iio: triggered-buffer: simplify devm_iio_triggered_buffer_setup_ext()
iio: core: simplify some devm functions
iio: trigger: simplify __devm_iio_trigger_register
iio: inkern: simplify some devm functions
Zhen Lei (1):
iio: ep93xx: Remove redundant error printing in ep93xx_adc_probe()
Documentation/ABI/obsolete/sysfs-bus-iio | 182 +++
Documentation/ABI/testing/sysfs-bus-counter | 9 +
Documentation/ABI/testing/sysfs-bus-iio | 125 +-
.../ABI/testing/sysfs-bus-iio-frequency-adf4371 | 33 -
.../ABI/testing/sysfs-bus-iio-health-afe440x | 10 +-
Documentation/ABI/testing/sysfs-bus-iio-icm42600 | 20 -
.../ABI/testing/sysfs-bus-iio-light-lm3533-als | 11 +-
.../bindings/iio/accel/adi,adis16201.yaml | 55 +
.../bindings/iio/accel/bosch,bma220.yaml | 50 +
.../devicetree/bindings/iio/accel/fsl,mma7455.yaml | 82 ++
.../bindings/iio/accel/kionix,kxcjk1013.yaml | 1 +
.../bindings/iio/accel/murata,sca3300.yaml | 44 +
.../bindings/iio/accel/nxp,fxls8962af.yaml | 80 ++
Documentation/devicetree/bindings/iio/adc/adc.yaml | 12 +
.../devicetree/bindings/iio/adc/adi,ad7298.yaml | 48 +
.../devicetree/bindings/iio/adc/adi,ad7476.yaml | 174 +++
.../devicetree/bindings/iio/adc/ti,tsc2046.yaml | 115 ++
.../bindings/iio/afe/current-sense-shunt.yaml | 4 +
.../devicetree/bindings/iio/cdc/adi,ad7746.yaml | 77 ++
.../bindings/iio/chemical/sensirion,sps30.yaml | 7 +-
.../devicetree/bindings/iio/dac/ad5755.txt | 124 --
.../devicetree/bindings/iio/dac/adi,ad5755.yaml | 169 +++
.../devicetree/bindings/iio/dac/ti,dac082s085.yaml | 72 ++
.../devicetree/bindings/iio/dac/ti-dac082s085.txt | 34 -
.../bindings/iio/light/amstaos,tsl2591.yaml | 50 +
.../devicetree/bindings/iio/st,st-sensors.yaml | 262 +++--
.../bindings/iio/temperature/ti,tmp117.yaml | 41 +
.../devicetree/bindings/trivial-devices.yaml | 10 +
MAINTAINERS | 22 +
drivers/counter/Kconfig | 10 +
drivers/counter/Makefile | 1 +
drivers/counter/intel-qep.c | 546 +++++++++
drivers/iio/accel/Kconfig | 40 +
drivers/iio/accel/Makefile | 4 +
drivers/iio/accel/adis16201.c | 3 -
drivers/iio/accel/adis16209.c | 3 -
drivers/iio/accel/adxl372.c | 4 +-
drivers/iio/accel/bma180.c | 17 +-
drivers/iio/accel/bma220_spi.c | 10 +-
drivers/iio/accel/bma400_core.c | 2 +-
drivers/iio/accel/bmc150-accel-core.c | 13 +-
drivers/iio/accel/bmi088-accel-core.c | 27 +-
drivers/iio/accel/fxls8962af-core.c | 968 ++++++++++++++++
drivers/iio/accel/fxls8962af-i2c.c | 57 +
drivers/iio/accel/fxls8962af-spi.c | 57 +
drivers/iio/accel/fxls8962af.h | 22 +
drivers/iio/accel/hid-sensor-accel-3d.c | 13 +-
drivers/iio/accel/kxcjk-1013.c | 253 +++-
drivers/iio/accel/kxsd9.c | 2 +-
drivers/iio/accel/mma8452.c | 7 +-
drivers/iio/accel/mma9551.c | 1 -
drivers/iio/accel/mma9551_core.c | 4 +-
drivers/iio/accel/mma9553.c | 1 -
drivers/iio/accel/mxc4005.c | 12 +-
drivers/iio/accel/sca3300.c | 472 ++++++++
drivers/iio/accel/st_accel.h | 12 -
drivers/iio/accel/st_accel_core.c | 230 ++--
drivers/iio/accel/st_accel_i2c.c | 17 +-
drivers/iio/accel/st_accel_spi.c | 17 +-
drivers/iio/accel/stk8312.c | 27 +-
drivers/iio/accel/stk8ba50.c | 19 +-
drivers/iio/adc/Kconfig | 12 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/ad7298.c | 8 +
drivers/iio/adc/ad7476.c | 118 +-
drivers/iio/adc/ad7606.c | 3 +-
drivers/iio/adc/ad7766.c | 8 +-
drivers/iio/adc/ad7768-1.c | 3 +-
drivers/iio/adc/ad_sigma_delta.c | 2 +-
drivers/iio/adc/adi-axi-adc.c | 24 +-
drivers/iio/adc/at91-sama5d2_adc.c | 2 +-
drivers/iio/adc/at91_adc.c | 4 +-
drivers/iio/adc/dln2-adc.c | 3 +-
drivers/iio/adc/ep93xx_adc.c | 4 +-
drivers/iio/adc/exynos_adc.c | 2 +-
drivers/iio/adc/ina2xx-adc.c | 3 +-
drivers/iio/adc/max11100.c | 34 +-
drivers/iio/adc/max1118.c | 68 +-
drivers/iio/adc/mp2629_adc.c | 1 -
drivers/iio/adc/mt6360-adc.c | 1 -
drivers/iio/adc/mxs-lradc-adc.c | 2 +-
drivers/iio/adc/rcar-gyroadc.c | 15 +-
drivers/iio/adc/sc27xx_adc.c | 1 +
drivers/iio/adc/stm32-adc.c | 28 +-
drivers/iio/adc/stm32-dfsdm-core.c | 6 +-
drivers/iio/adc/ti-adc081c.c | 43 +-
drivers/iio/adc/ti-adc0832.c | 39 +-
drivers/iio/adc/ti-adc108s102.c | 45 +-
drivers/iio/adc/ti-adc161s626.c | 51 +-
drivers/iio/adc/ti-ads1015.c | 12 +-
drivers/iio/adc/ti-ads131e08.c | 3 +-
drivers/iio/adc/ti-tsc2046.c | 714 ++++++++++++
drivers/iio/adc/vf610_adc.c | 10 +-
drivers/iio/adc/xilinx-xadc-core.c | 2 +-
drivers/iio/afe/iio-rescale.c | 41 +-
drivers/iio/buffer/industrialio-buffer-dmaengine.c | 22 +-
drivers/iio/buffer/industrialio-hw-consumer.c | 25 +-
drivers/iio/buffer/industrialio-triggered-buffer.c | 23 +-
drivers/iio/chemical/Kconfig | 27 +-
drivers/iio/chemical/Makefile | 2 +
drivers/iio/chemical/atlas-sensor.c | 6 +-
drivers/iio/chemical/bme680_i2c.c | 8 -
drivers/iio/chemical/bme680_spi.c | 8 -
drivers/iio/chemical/ccs811.c | 2 +-
drivers/iio/chemical/scd30_core.c | 3 +-
drivers/iio/chemical/sgp30.c | 2 +-
drivers/iio/chemical/sps30.c | 275 +----
drivers/iio/chemical/sps30.h | 35 +
drivers/iio/chemical/sps30_i2c.c | 258 +++++
drivers/iio/chemical/sps30_serial.c | 431 +++++++
.../iio/common/hid-sensors/hid-sensor-trigger.c | 10 +-
drivers/iio/common/scmi_sensors/scmi_iio.c | 1 -
drivers/iio/dac/ad5766.c | 2 -
drivers/iio/dac/stm32-dac.c | 3 +-
drivers/iio/gyro/adis16136.c | 20 +-
drivers/iio/gyro/adis16260.c | 9 +-
drivers/iio/gyro/adxrs290.c | 2 +-
drivers/iio/gyro/bmg160_core.c | 17 +-
drivers/iio/gyro/fxas21002c_core.c | 13 +-
drivers/iio/gyro/itg3200_buffer.c | 2 +-
drivers/iio/gyro/itg3200_core.c | 3 +-
drivers/iio/gyro/mpu3050-core.c | 4 +-
drivers/iio/gyro/st_gyro.h | 12 -
drivers/iio/gyro/st_gyro_core.c | 53 +-
drivers/iio/gyro/st_gyro_i2c.c | 17 +-
drivers/iio/gyro/st_gyro_spi.c | 17 +-
drivers/iio/health/afe4403.c | 2 +-
drivers/iio/health/afe4404.c | 2 +-
drivers/iio/humidity/am2315.c | 25 +-
drivers/iio/humidity/hdc2010.c | 1 -
drivers/iio/imu/Kconfig | 1 +
drivers/iio/imu/Makefile | 1 +
drivers/iio/imu/adis.c | 4 -
drivers/iio/imu/adis16400.c | 25 +-
drivers/iio/imu/adis16460.c | 1 -
drivers/iio/imu/adis16475.c | 10 +-
drivers/iio/imu/adis16480.c | 164 ++-
drivers/iio/imu/adis_buffer.c | 27 +-
drivers/iio/imu/adis_trigger.c | 3 +-
drivers/iio/imu/bmi160/bmi160_core.c | 6 +-
drivers/iio/imu/inv_icm42600/inv_icm42600_core.c | 2 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 3 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 2 +-
drivers/iio/imu/kmx61.c | 7 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 8 +-
drivers/iio/imu/st_lsm9ds0/Kconfig | 28 +
drivers/iio/imu/st_lsm9ds0/Makefile | 5 +
drivers/iio/imu/st_lsm9ds0/st_lsm9ds0.h | 23 +
drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c | 163 +++
drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c | 84 ++
drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c | 83 ++
drivers/iio/industrialio-buffer.c | 13 +-
drivers/iio/industrialio-core.c | 126 +-
drivers/iio/industrialio-trigger.c | 37 +-
drivers/iio/industrialio-triggered-event.c | 2 +-
drivers/iio/inkern.c | 107 +-
drivers/iio/light/Kconfig | 11 +
drivers/iio/light/Makefile | 1 +
drivers/iio/light/acpi-als.c | 3 +-
drivers/iio/light/isl29028.c | 5 +-
drivers/iio/light/isl29125.c | 10 +-
drivers/iio/light/pa12203001.c | 4 +-
drivers/iio/light/rpr0521.c | 9 +-
drivers/iio/light/si1145.c | 2 +-
drivers/iio/light/tcs3414.c | 10 +-
drivers/iio/light/tcs3472.c | 10 +-
drivers/iio/light/tsl2583.c | 13 +-
drivers/iio/light/tsl2591.c | 1225 ++++++++++++++++++++
drivers/iio/light/us5182d.c | 4 +-
drivers/iio/light/vcnl4000.c | 7 +-
drivers/iio/light/vcnl4035.c | 6 +-
drivers/iio/light/veml6030.c | 2 +-
drivers/iio/magnetometer/ak8974.c | 3 +-
drivers/iio/magnetometer/ak8975.c | 2 +-
drivers/iio/magnetometer/bmc150_magn.c | 26 +-
drivers/iio/magnetometer/hmc5843.h | 8 +-
drivers/iio/magnetometer/hmc5843_core.c | 7 +-
drivers/iio/magnetometer/rm3100-core.c | 2 +-
drivers/iio/magnetometer/st_magn.h | 4 -
drivers/iio/magnetometer/st_magn_core.c | 181 ++-
drivers/iio/magnetometer/st_magn_i2c.c | 14 +-
drivers/iio/magnetometer/st_magn_spi.c | 14 +-
drivers/iio/magnetometer/yamaha-yas530.c | 2 +-
.../iio/position/hid-sensor-custom-intel-hinge.c | 1 -
drivers/iio/potentiostat/lmp91000.c | 7 +-
drivers/iio/pressure/st_pressure.h | 4 -
drivers/iio/pressure/st_pressure_core.c | 15 +-
drivers/iio/pressure/st_pressure_i2c.c | 17 +-
drivers/iio/pressure/st_pressure_spi.c | 17 +-
drivers/iio/pressure/zpa2326.c | 3 +-
drivers/iio/proximity/as3935.c | 13 +-
drivers/iio/proximity/pulsedlight-lidar-lite-v2.c | 10 +-
drivers/iio/proximity/srf04.c | 8 +-
drivers/iio/proximity/srf08.c | 14 +-
drivers/iio/proximity/sx9310.c | 2 +-
drivers/iio/proximity/sx9500.c | 2 +-
drivers/iio/temperature/Kconfig | 10 +
drivers/iio/temperature/Makefile | 1 +
drivers/iio/temperature/mlx90614.c | 25 +-
drivers/iio/temperature/tmp117.c | 185 +++
drivers/iio/trigger/stm32-timer-trigger.c | 2 +-
drivers/staging/iio/accel/adis16203.c | 6 -
drivers/staging/iio/accel/adis16240.c | 6 -
drivers/staging/iio/cdc/ad7746.c | 114 +-
drivers/staging/iio/cdc/ad7746.h | 28 -
include/linux/i2c.h | 8 +-
include/linux/iio/common/cros_ec_sensors_core.h | 2 +-
include/linux/iio/common/st_sensors.h | 36 +-
include/linux/iio/iio-opaque.h | 22 +-
include/linux/iio/iio.h | 32 +-
include/linux/iio/imu/adis.h | 2 +
include/linux/platform_data/st_sensors_pdata.h | 3 +-
212 files changed, 8761 insertions(+), 1803 deletions(-)
create mode 100644 Documentation/ABI/obsolete/sysfs-bus-iio
delete mode 100644 Documentation/ABI/testing/sysfs-bus-iio-icm42600
create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
create mode 100644 Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
create mode 100644 Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
create mode 100644 Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml
create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
create mode 100644 Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml
delete mode 100644 Documentation/devicetree/bindings/iio/dac/ad5755.txt
create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml
create mode 100644 Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml
delete mode 100644 Documentation/devicetree/bindings/iio/dac/ti-dac082s085.txt
create mode 100644 Documentation/devicetree/bindings/iio/light/amstaos,tsl2591.yaml
create mode 100644 Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
create mode 100644 drivers/counter/intel-qep.c
create mode 100644 drivers/iio/accel/fxls8962af-core.c
create mode 100644 drivers/iio/accel/fxls8962af-i2c.c
create mode 100644 drivers/iio/accel/fxls8962af-spi.c
create mode 100644 drivers/iio/accel/fxls8962af.h
create mode 100644 drivers/iio/accel/sca3300.c
create mode 100644 drivers/iio/adc/ti-tsc2046.c
create mode 100644 drivers/iio/chemical/sps30.h
create mode 100644 drivers/iio/chemical/sps30_i2c.c
create mode 100644 drivers/iio/chemical/sps30_serial.c
create mode 100644 drivers/iio/imu/st_lsm9ds0/Kconfig
create mode 100644 drivers/iio/imu/st_lsm9ds0/Makefile
create mode 100644 drivers/iio/imu/st_lsm9ds0/st_lsm9ds0.h
create mode 100644 drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c
create mode 100644 drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c
create mode 100644 drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c
create mode 100644 drivers/iio/light/tsl2591.c
create mode 100644 drivers/iio/temperature/tmp117.c
delete mode 100644 drivers/staging/iio/cdc/ad7746.h
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-06-09 10:14 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-08 16:32 [PULL] 1st set of IIO new device support, features and cleanups for 5.14 Jonathan Cameron
2021-06-09 10:12 ` Greg KH
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.